From abd2fddc94a619b96bf41c60429d4c32bd118e17 Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Thu, 8 Jul 2021 15:27:53 +0300 Subject: net/ncsi: add NCSI Intel OEM command to keep PHY up This allows to keep PHY link up and prevents any channel resets during the host load. It is KEEP_PHY_LINK_UP option(Veto bit) in i210 datasheet which block PHY reset and power state changes. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- net/ncsi/Kconfig | 6 ++++++ net/ncsi/internal.h | 5 +++++ net/ncsi/ncsi-manage.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 56 insertions(+) diff --git a/net/ncsi/Kconfig b/net/ncsi/Kconfig index 93309081f5a4..ea1dd32b6b1f 100644 --- a/net/ncsi/Kconfig +++ b/net/ncsi/Kconfig @@ -17,3 +17,9 @@ config NCSI_OEM_CMD_GET_MAC help This allows to get MAC address from NCSI firmware and set them back to controller. +config NCSI_OEM_CMD_KEEP_PHY + bool "Keep PHY Link up" + depends on NET_NCSI + help + This allows to keep PHY link up and prevents any channel resets during + the host load. diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h index cbbb0de4750a..0b6cfd3b31e0 100644 --- a/net/ncsi/internal.h +++ b/net/ncsi/internal.h @@ -78,6 +78,9 @@ enum { /* OEM Vendor Manufacture ID */ #define NCSI_OEM_MFR_MLX_ID 0x8119 #define NCSI_OEM_MFR_BCM_ID 0x113d +#define NCSI_OEM_MFR_INTEL_ID 0x157 +/* Intel specific OEM command */ +#define NCSI_OEM_INTEL_CMD_KEEP_PHY 0x20 /* CMD ID for Keep PHY up */ /* Broadcom specific OEM Command */ #define NCSI_OEM_BCM_CMD_GMA 0x01 /* CMD ID for Get MAC */ /* Mellanox specific OEM Command */ @@ -86,6 +89,7 @@ enum { #define NCSI_OEM_MLX_CMD_SMAF 0x01 /* CMD ID for Set MC Affinity */ #define NCSI_OEM_MLX_CMD_SMAF_PARAM 0x07 /* Parameter for SMAF */ /* OEM Command payload lengths*/ +#define NCSI_OEM_INTEL_CMD_KEEP_PHY_LEN 7 #define NCSI_OEM_BCM_CMD_GMA_LEN 12 #define NCSI_OEM_MLX_CMD_GMA_LEN 8 #define NCSI_OEM_MLX_CMD_SMAF_LEN 60 @@ -271,6 +275,7 @@ enum { ncsi_dev_state_probe_mlx_gma, ncsi_dev_state_probe_mlx_smaf, ncsi_dev_state_probe_cis, + ncsi_dev_state_probe_keep_phy, ncsi_dev_state_probe_gvi, ncsi_dev_state_probe_gc, ncsi_dev_state_probe_gls, diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c index 42b54a3da2e6..89c7742cd72e 100644 --- a/net/ncsi/ncsi-manage.c +++ b/net/ncsi/ncsi-manage.c @@ -689,6 +689,35 @@ static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc, return 0; } +#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY) + +static int ncsi_oem_keep_phy_intel(struct ncsi_cmd_arg *nca) +{ + unsigned char data[NCSI_OEM_INTEL_CMD_KEEP_PHY_LEN]; + int ret = 0; + + nca->payload = NCSI_OEM_INTEL_CMD_KEEP_PHY_LEN; + + memset(data, 0, NCSI_OEM_INTEL_CMD_KEEP_PHY_LEN); + *(unsigned int *)data = ntohl((__force __be32)NCSI_OEM_MFR_INTEL_ID); + + data[4] = NCSI_OEM_INTEL_CMD_KEEP_PHY; + + /* PHY Link up attribute */ + data[6] = 0x1; + + nca->data = data; + + ret = ncsi_xmit_cmd(nca); + if (ret) + netdev_err(nca->ndp->ndev.dev, + "NCSI: Failed to transmit cmd 0x%x during configure\n", + nca->type); + return ret; +} + +#endif + #if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC) /* NCSI OEM Command APIs */ @@ -1391,8 +1420,24 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp) goto error; } + nd->state = ncsi_dev_state_probe_gvi; + if (IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY)) + nd->state = ncsi_dev_state_probe_keep_phy; + break; +#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY) + case ncsi_dev_state_probe_keep_phy: + ndp->pending_req_num = 1; + + nca.type = NCSI_PKT_CMD_OEM; + nca.package = ndp->active_package->id; + nca.channel = 0; + ret = ncsi_oem_keep_phy_intel(&nca); + if (ret) + goto error; + nd->state = ncsi_dev_state_probe_gvi; break; +#endif /* CONFIG_NCSI_OEM_CMD_KEEP_PHY */ case ncsi_dev_state_probe_gvi: case ncsi_dev_state_probe_gc: case ncsi_dev_state_probe_gls: -- cgit v1.2.3