From 8922a908908ff947f1f211e07e2e97f1169ad3cb Mon Sep 17 00:00:00 2001 From: Ulrich Obergfell Date: Wed, 4 Jun 2014 13:34:57 +0200 Subject: scsi_error: fix invalid setting of host byte After scsi_try_to_abort_cmd returns, the eh_abort_handler may have already found that the command has completed in the device, causing the host_byte to be nonzero (e.g. it could be DID_ABORT). When this happens, ORing DID_TIME_OUT into the host byte will corrupt the result field and initiate an unwanted command retry. Fix this by using set_host_byte instead, following the model of commit 2082ebc45af9c9c648383b8cde0dc1948eadbf31. Cc: stable@vger.kernel.org Signed-off-by: Ulrich Obergfell [Fix all instances according to review comments. - Paolo] Signed-off-by: Paolo Bonzini Signed-off-by: Christoph Hellwig Reviewed-by: Ewan D. Milne Reviewed-by: Hannes Reinecke --- drivers/scsi/scsi_error.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index cbe38e5e7955..55ecf70fe3d9 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -131,7 +131,7 @@ scmd_eh_abort_handler(struct work_struct *work) "aborting command %p\n", scmd)); rtn = scsi_try_to_abort_cmd(sdev->host->hostt, scmd); if (rtn == SUCCESS) { - scmd->result |= DID_TIME_OUT << 16; + set_host_byte(scmd, DID_TIME_OUT); if (scsi_host_eh_past_deadline(sdev->host)) { SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd, @@ -167,7 +167,7 @@ scmd_eh_abort_handler(struct work_struct *work) scmd_printk(KERN_WARNING, scmd, "scmd %p terminate " "aborted command\n", scmd)); - scmd->result |= DID_TIME_OUT << 16; + set_host_byte(scmd, DID_TIME_OUT); scsi_finish_command(scmd); } } @@ -291,7 +291,7 @@ enum blk_eh_timer_return scsi_times_out(struct request *req) if (scsi_abort_command(scmd) == SUCCESS) return BLK_EH_NOT_HANDLED; - scmd->result |= DID_TIME_OUT << 16; + set_host_byte(scmd, DID_TIME_OUT); if (unlikely(rtn == BLK_EH_NOT_HANDLED && !scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD))) @@ -1777,7 +1777,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) break; case DID_ABORT: if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) { - scmd->result |= DID_TIME_OUT << 16; + set_host_byte(scmd, DID_TIME_OUT); return SUCCESS; } case DID_NO_CONNECT: -- cgit v1.2.3 From a33c070bced8b283e22e8dbae35177a033b810bf Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Fri, 13 Jun 2014 14:01:45 +0200 Subject: scsi_error: set DID_TIME_OUT correctly Any callbacks in scsi_timeout_out() might return BLK_EH_RESET_TIMER, in which case we should leave the result alone and not set DID_TIME_OUT, as the command didn't actually timeout. Signed-off-by: Hannes Reinecke Signed-off-by: Christoph Hellwig Reviewed-by: Ewan D. Milne --- drivers/scsi/scsi_error.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 55ecf70fe3d9..7e957918f33f 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -287,15 +287,15 @@ enum blk_eh_timer_return scsi_times_out(struct request *req) else if (host->hostt->eh_timed_out) rtn = host->hostt->eh_timed_out(scmd); - if (rtn == BLK_EH_NOT_HANDLED && !host->hostt->no_async_abort) - if (scsi_abort_command(scmd) == SUCCESS) + if (rtn == BLK_EH_NOT_HANDLED) { + if (!host->hostt->no_async_abort && + scsi_abort_command(scmd) == SUCCESS) return BLK_EH_NOT_HANDLED; - set_host_byte(scmd, DID_TIME_OUT); - - if (unlikely(rtn == BLK_EH_NOT_HANDLED && - !scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD))) - rtn = BLK_EH_HANDLED; + set_host_byte(scmd, DID_TIME_OUT); + if (!scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD)) + rtn = BLK_EH_HANDLED; + } return rtn; } -- cgit v1.2.3 From 5f2d25efa4c4567fa72b70de4e041252c72aa10e Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Fri, 6 Jun 2014 14:06:30 +0200 Subject: be2iscsi: add an missing goto in error path a jump to 'free_memory' is apparently missing Signed-off-by: Tomas Henzl Reviewed-by: Mike Christie Signed-off-by: Christoph Hellwig --- drivers/scsi/be2iscsi/be_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c index 554349029628..56467df3d6de 100644 --- a/drivers/scsi/be2iscsi/be_main.c +++ b/drivers/scsi/be2iscsi/be_main.c @@ -4198,6 +4198,8 @@ static int hba_setup_cid_tbls(struct beiscsi_hba *phba) kfree(phba->ep_array); phba->ep_array = NULL; ret = -ENOMEM; + + goto free_memory; } for (i = 0; i < phba->params.cxns_per_ctrl; i++) { -- cgit v1.2.3 From beff65497ab12821c65739557c77d85bdd4ca618 Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Fri, 6 Jun 2014 14:22:44 +0200 Subject: be2iscsi: remove potential junk pointer free commit 0e7c60c [SCSI] be2iscsi: fix memory leak in error path fixed an potential junk pointer free if mgmt_get_if_info() returned an error fix it on one more place Signed-off-by: Tomas Henzl Reviewed-by: Mike Christie Signed-off-by: Christoph Hellwig --- drivers/scsi/be2iscsi/be_mgmt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c index 6045aa78986a..07934b0b9ee1 100644 --- a/drivers/scsi/be2iscsi/be_mgmt.c +++ b/drivers/scsi/be2iscsi/be_mgmt.c @@ -1008,10 +1008,8 @@ int mgmt_set_ip(struct beiscsi_hba *phba, BE2_IPV6 : BE2_IPV4 ; rc = mgmt_get_if_info(phba, ip_type, &if_info); - if (rc) { - kfree(if_info); + if (rc) return rc; - } if (boot_proto == ISCSI_BOOTPROTO_DHCP) { if (if_info->dhcp_state) { -- cgit v1.2.3 From 3a980508c3fab88527998c258ddb3c12ff36fedc Mon Sep 17 00:00:00 2001 From: "Reddy, Sreekanth" Date: Fri, 13 Jun 2014 20:48:04 +0530 Subject: MAINTAINERS: Update LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) maintainers Email IDs Updating maintainers Email Ids for the entry LSILOGIC MPT FUSION DRIVERS in MAINTAINERS file Signed-off-by: Sreekanth Reddy Signed-off-by: Christoph Hellwig --- MAINTAINERS | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3cc94fff780f..636a51af0770 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5517,10 +5517,11 @@ S: Maintained F: arch/arm/mach-lpc32xx/ LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) -M: Nagalakshmi Nandigama -M: Sreekanth Reddy -M: support@lsi.com -L: DL-MPTFusionLinux@lsi.com +M: Nagalakshmi Nandigama +M: Praveen Krishnamoorthy +M: Sreekanth Reddy +M: Abhijit Mahajan +L: MPT-FusionLinux.pdl@avagotech.com L: linux-scsi@vger.kernel.org W: http://www.lsilogic.com/support S: Supported -- cgit v1.2.3 From f2c6f180c98e1a8bc84781f32894b595363d3dfb Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Tue, 17 Jun 2014 13:15:40 +0200 Subject: pm8001: Fix potential null pointer dereference and memory leak. The pm8001_get_phy_settings_info() function does not check the kzalloc() return value and does not free the allocated memory. Signed-off-by: Maurizio Lombardi Acked-by: Suresh Thiagarajan Acked-by: Jack Wang Signed-off-by: Christoph Hellwig --- drivers/scsi/pm8001/pm8001_init.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index c4f31b21feb8..e90c89f1d480 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -677,7 +677,7 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) * pm8001_get_phy_settings_info : Read phy setting values. * @pm8001_ha : our hba. */ -void pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha) +static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha) { #ifdef PM8001_READ_VPD @@ -691,11 +691,15 @@ void pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha) payload.offset = 0; payload.length = 4096; payload.func_specific = kzalloc(4096, GFP_KERNEL); + if (!payload.func_specific) + return -ENOMEM; /* Read phy setting values from flash */ PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload); wait_for_completion(&completion); pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific); + kfree(payload.func_specific); #endif + return 0; } #ifdef PM8001_USE_MSIX @@ -879,8 +883,11 @@ static int pm8001_pci_probe(struct pci_dev *pdev, pm8001_init_sas_add(pm8001_ha); /* phy setting support for motherboard controller */ if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2 && - pdev->subsystem_vendor != 0) - pm8001_get_phy_settings_info(pm8001_ha); + pdev->subsystem_vendor != 0) { + rc = pm8001_get_phy_settings_info(pm8001_ha); + if (rc) + goto err_out_shost; + } pm8001_post_sas_ha_init(shost, chip); rc = sas_register_ha(SHOST_TO_SAS_HA(shost)); if (rc) -- cgit v1.2.3 From 0353e085edb0f11e040cf91e71d831ec07943b20 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 23 Jun 2014 10:40:25 -0400 Subject: fc: ensure scan_work isn't active when freeing fc_rport debugfs caught this: WARNING: at lib/debugobjects.c:260 debug_print_object+0x83/0xa0() ODEBUG: free active (active state 0) object type: work_struct hint: fc_scsi_scan_rport+0x0/0xd0 [scsi_transport_fc] CPU: 1 PID: 184 Comm: kworker/1:1 Tainted: G W -------------- 3.10.0-123.el7.x86_64.debug #1 Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 Workqueue: fc_wq_5 fc_rport_final_delete [scsi_transport_fc] Call Trace: [] dump_stack+0x19/0x1b [] warn_slowpath_common+0x61/0x80 [] warn_slowpath_fmt+0x5c/0x80 [] debug_print_object+0x83/0xa0 [] ? fc_parse_wwn+0x100/0x100 [] debug_check_no_obj_freed+0x22b/0x270 [] ? fc_rport_dev_release+0x1e/0x30 [] kfree+0xd9/0x2d0 [] fc_rport_dev_release+0x1e/0x30 [] device_release+0x32/0xa0 [] kobject_release+0x7e/0x1b0 [] kobject_put+0x28/0x60 [] put_device+0x17/0x20 [] fc_rport_final_delete+0x165/0x210 [] process_one_work+0x220/0x710 [] ? process_one_work+0x1b4/0x710 [] worker_thread+0x11b/0x3a0 [] ? process_one_work+0x710/0x710 [] kthread+0xed/0x100 [] ? insert_kthread_work+0x80/0x80 [] ret_from_fork+0x7c/0xb0 [] ? insert_kthread_work+0x80/0x80 Seems to be because the scan_work work_struct might be active when the housing fc_rport struct gets freed. Ensure that we cancel it prior to freeing the rport Signed-off-by: Neil Horman Reviewed-by: Vasu Dev Reviewed-by: Hannes Reinecke Signed-off-by: Christoph Hellwig --- drivers/scsi/scsi_transport_fc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index f80908f74ca9..521f5838594b 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -2549,6 +2549,7 @@ fc_rport_final_delete(struct work_struct *work) fc_flush_devloss(shost); if (!cancel_delayed_work(&rport->dev_loss_work)) fc_flush_devloss(shost); + cancel_work_sync(&rport->scan_work); spin_lock_irqsave(shost->host_lock, flags); rport->flags &= ~FC_RPORT_DEVLOSS_PENDING; } -- cgit v1.2.3 From 9172b763a776bae644d140748a0352fc67277a4c Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Thu, 19 Jun 2014 15:05:00 +0200 Subject: bnx2fc: do not scan uninitialized lists in case of error. In case of of error, the bnx2fc_cmd_mgr_alloc() function will call the bnx2fc_cmd_mgr_free() to perform the cleanup. The problem is that in one case the latter may try to scan some not-yet initialized lists, resulting in a kernel panic. This patch prevents this from happening by freeing the lists before calling bnx2fc_cmd_mgr_free(). Signed-off-by: Maurizio Lombardi Acked-by: Eddie Wai Signed-off-by: Christoph Hellwig --- drivers/scsi/bnx2fc/bnx2fc_io.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c index 32a5e0a2a669..7bc47fc7c686 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_io.c +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c @@ -282,6 +282,8 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba) arr_sz, GFP_KERNEL); if (!cmgr->free_list_lock) { printk(KERN_ERR PFX "failed to alloc free_list_lock\n"); + kfree(cmgr->free_list); + cmgr->free_list = NULL; goto mem_err; } -- cgit v1.2.3 From d576a5e80cd07ea7049f8fd7b303c14df7b5d7d2 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 23 Jun 2014 10:41:02 -0400 Subject: bnx2fc: Improve stats update mechanism Recently had this warning reported: [ 290.489047] Call Trace: [ 290.489053] [] dump_stack+0x19/0x1b [ 290.489055] [] __might_sleep+0x179/0x230 [ 290.489057] [] mutex_lock_nested+0x55/0x520 [ 290.489061] [] ? bnx2fc_l2_rcv_thread+0xc5/0x4c0 [bnx2fc] [ 290.489065] [] fc_vport_id_lookup+0x3a/0xa0 [libfc] [ 290.489068] [] bnx2fc_l2_rcv_thread+0x22c/0x4c0 [bnx2fc] [ 290.489070] [] ? bnx2fc_vport_destroy+0x110/0x110 [bnx2fc] [ 290.489073] [] kthread+0xed/0x100 [ 290.489075] [] ? insert_kthread_work+0x80/0x80 [ 290.489077] [] ret_from_fork+0x7c/0xb0 [ 290.489078] [] ? insert_kthread_work+0x80/0x80 Its due to the fact that we call a potentially sleeping function from the bnx2fc rcv path with preemption disabled (via the get_cpu call embedded in the per-cpu variable stats lookup in bnx2fc_l2_rcv_thread. Easy enough fix, we can just move the stats collection later in the function where we are sure we won't preempt or sleep. This also allows us to not have to enable pre-emption when doing a per-cpu lookup, since we're certain not to get rescheduled. Signed-off-by: Neil Horman Acked-by: Eddie Wai Signed-off-by: Christoph Hellwig --- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index f54843023466..785d0d71781e 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -516,23 +516,17 @@ static void bnx2fc_recv_frame(struct sk_buff *skb) skb_pull(skb, sizeof(struct fcoe_hdr)); fr_len = skb->len - sizeof(struct fcoe_crc_eof); - stats = per_cpu_ptr(lport->stats, get_cpu()); - stats->RxFrames++; - stats->RxWords += fr_len / FCOE_WORD_TO_BYTE; - fp = (struct fc_frame *)skb; fc_frame_init(fp); fr_dev(fp) = lport; fr_sof(fp) = hp->fcoe_sof; if (skb_copy_bits(skb, fr_len, &crc_eof, sizeof(crc_eof))) { - put_cpu(); kfree_skb(skb); return; } fr_eof(fp) = crc_eof.fcoe_eof; fr_crc(fp) = crc_eof.fcoe_crc32; if (pskb_trim(skb, fr_len)) { - put_cpu(); kfree_skb(skb); return; } @@ -544,7 +538,6 @@ static void bnx2fc_recv_frame(struct sk_buff *skb) port = lport_priv(vn_port); if (!ether_addr_equal(port->data_src_addr, dest_mac)) { BNX2FC_HBA_DBG(lport, "fpma mismatch\n"); - put_cpu(); kfree_skb(skb); return; } @@ -552,7 +545,6 @@ static void bnx2fc_recv_frame(struct sk_buff *skb) if (fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA && fh->fh_type == FC_TYPE_FCP) { /* Drop FCP data. We dont this in L2 path */ - put_cpu(); kfree_skb(skb); return; } @@ -562,7 +554,6 @@ static void bnx2fc_recv_frame(struct sk_buff *skb) case ELS_LOGO: if (ntoh24(fh->fh_s_id) == FC_FID_FLOGI) { /* drop non-FIP LOGO */ - put_cpu(); kfree_skb(skb); return; } @@ -572,22 +563,23 @@ static void bnx2fc_recv_frame(struct sk_buff *skb) if (fh->fh_r_ctl == FC_RCTL_BA_ABTS) { /* Drop incoming ABTS */ - put_cpu(); kfree_skb(skb); return; } + stats = per_cpu_ptr(lport->stats, smp_processor_id()); + stats->RxFrames++; + stats->RxWords += fr_len / FCOE_WORD_TO_BYTE; + if (le32_to_cpu(fr_crc(fp)) != ~crc32(~0, skb->data, fr_len)) { if (stats->InvalidCRCCount < 5) printk(KERN_WARNING PFX "dropping frame with " "CRC error\n"); stats->InvalidCRCCount++; - put_cpu(); kfree_skb(skb); return; } - put_cpu(); fc_exch_recv(lport, fp); } -- cgit v1.2.3 From 33a5fcee7f5d4920ff33997169e02cc34cbab6e6 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Tue, 24 Jun 2014 00:22:29 -0400 Subject: qla2xxx: Fix sparse warning in qla_target.c. Signed-off-by: Quinn Tran Signed-off-by: Saurav Kashyap Signed-off-by: Christoph Hellwig --- drivers/scsi/qla2xxx/qla_target.c | 17 +++++++++++------ drivers/scsi/qla2xxx/qla_target.h | 4 ++-- 2 files changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 4b188b0164e9..e632e14180cf 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1128,7 +1128,7 @@ static void qlt_24xx_retry_term_exchange(struct scsi_qla_host *vha, ctio->u.status1.flags = __constant_cpu_to_le16(CTIO7_FLAGS_STATUS_MODE_1 | CTIO7_FLAGS_TERMINATE); - ctio->u.status1.ox_id = entry->fcp_hdr_le.ox_id; + ctio->u.status1.ox_id = cpu_to_le16(entry->fcp_hdr_le.ox_id); qla2x00_start_iocbs(vha, vha->req); @@ -1262,6 +1262,7 @@ static void qlt_24xx_send_task_mgmt_ctio(struct scsi_qla_host *ha, { struct atio_from_isp *atio = &mcmd->orig_iocb.atio; struct ctio7_to_24xx *ctio; + uint16_t temp; ql_dbg(ql_dbg_tgt, ha, 0xe008, "Sending task mgmt CTIO7 (ha=%p, atio=%p, resp_code=%x\n", @@ -1292,7 +1293,8 @@ static void qlt_24xx_send_task_mgmt_ctio(struct scsi_qla_host *ha, ctio->u.status1.flags = (atio->u.isp24.attr << 9) | __constant_cpu_to_le16(CTIO7_FLAGS_STATUS_MODE_1 | CTIO7_FLAGS_SEND_STATUS); - ctio->u.status1.ox_id = swab16(atio->u.isp24.fcp_hdr.ox_id); + temp = be16_to_cpu(atio->u.isp24.fcp_hdr.ox_id); + ctio->u.status1.ox_id = cpu_to_le16(temp); ctio->u.status1.scsi_status = __constant_cpu_to_le16(SS_RESPONSE_INFO_LEN_VALID); ctio->u.status1.response_len = __constant_cpu_to_le16(8); @@ -1513,6 +1515,7 @@ static int qlt_24xx_build_ctio_pkt(struct qla_tgt_prm *prm, struct ctio7_to_24xx *pkt; struct qla_hw_data *ha = vha->hw; struct atio_from_isp *atio = &prm->cmd->atio; + uint16_t temp; pkt = (struct ctio7_to_24xx *)vha->req->ring_ptr; prm->pkt = pkt; @@ -1541,13 +1544,13 @@ static int qlt_24xx_build_ctio_pkt(struct qla_tgt_prm *prm, pkt->initiator_id[2] = atio->u.isp24.fcp_hdr.s_id[0]; pkt->exchange_addr = atio->u.isp24.exchange_addr; pkt->u.status0.flags |= (atio->u.isp24.attr << 9); - pkt->u.status0.ox_id = swab16(atio->u.isp24.fcp_hdr.ox_id); + temp = be16_to_cpu(atio->u.isp24.fcp_hdr.ox_id); + pkt->u.status0.ox_id = cpu_to_le16(temp); pkt->u.status0.relative_offset = cpu_to_le32(prm->cmd->offset); ql_dbg(ql_dbg_tgt, vha, 0xe00c, "qla_target(%d): handle(cmd) -> %08x, timeout %d, ox_id %#x\n", - vha->vp_idx, pkt->handle, QLA_TGT_TIMEOUT, - le16_to_cpu(pkt->u.status0.ox_id)); + vha->vp_idx, pkt->handle, QLA_TGT_TIMEOUT, temp); return 0; } @@ -2619,6 +2622,7 @@ static int __qlt_send_term_exchange(struct scsi_qla_host *vha, struct qla_hw_data *ha = vha->hw; request_t *pkt; int ret = 0; + uint16_t temp; ql_dbg(ql_dbg_tgt, vha, 0xe01c, "Sending TERM EXCH CTIO (ha=%p)\n", ha); @@ -2655,7 +2659,8 @@ static int __qlt_send_term_exchange(struct scsi_qla_host *vha, ctio24->u.status1.flags = (atio->u.isp24.attr << 9) | __constant_cpu_to_le16(CTIO7_FLAGS_STATUS_MODE_1 | CTIO7_FLAGS_TERMINATE); - ctio24->u.status1.ox_id = swab16(atio->u.isp24.fcp_hdr.ox_id); + temp = be16_to_cpu(atio->u.isp24.fcp_hdr.ox_id); + ctio24->u.status1.ox_id = cpu_to_le16(temp); /* Most likely, it isn't needed */ ctio24->u.status1.residual = get_unaligned((uint32_t *) diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index e0a58fd13f66..d1d24fb0160a 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -443,7 +443,7 @@ struct ctio7_to_24xx { uint16_t reserved1; __le16 flags; uint32_t residual; - uint16_t ox_id; + __le16 ox_id; uint16_t scsi_status; uint32_t relative_offset; uint32_t reserved2; @@ -458,7 +458,7 @@ struct ctio7_to_24xx { uint16_t sense_length; uint16_t flags; uint32_t residual; - uint16_t ox_id; + __le16 ox_id; uint16_t scsi_status; uint16_t response_len; uint16_t reserved; -- cgit v1.2.3 From 9ee755974bea2f9880e517ec985dc9dede1b3a36 Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 23 May 2014 10:52:10 -0500 Subject: ibmvscsi: Abort init sequence during error recovery If a CRQ reset is triggered for some reason while in the middle of performing VSCSI adapter initialization, we don't want to call the done function for the initialization MAD commands as this will only result in two threads attempting initialization at the same time, resulting in failures. Signed-off-by: Brian King Acked-by: Nathan Fontenot Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig --- drivers/scsi/ibmvscsi/ibmvscsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 2ebfb2bb0f42..9caf9a979659 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -797,7 +797,8 @@ static void purge_requests(struct ibmvscsi_host_data *hostdata, int error_code) evt->hostdata->dev); if (evt->cmnd_done) evt->cmnd_done(evt->cmnd); - } else if (evt->done) + } else if (evt->done && evt->crq.format != VIOSRP_MAD_FORMAT && + evt->iu.srp.login_req.opcode != SRP_LOGIN_REQ) evt->done(evt); free_event_struct(&evt->hostdata->pool, evt); spin_lock_irqsave(hostdata->host->host_lock, flags); -- cgit v1.2.3 From 7114aae02742d6b5c5a0d39a41deb61d415d3717 Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 23 May 2014 10:52:11 -0500 Subject: ibmvscsi: Add memory barriers for send / receive Add a memory barrier prior to sending a new command to the VIOS to ensure the VIOS does not receive stale data in the command buffer. Also add a memory barrier when processing the CRQ for completed commands. Signed-off-by: Brian King Acked-by: Nathan Fontenot Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig --- drivers/scsi/ibmvscsi/ibmvscsi.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 9caf9a979659..7b23f21f22f1 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -185,6 +185,11 @@ static struct viosrp_crq *crq_queue_next_crq(struct crq_queue *queue) if (crq->valid & 0x80) { if (++queue->cur == queue->size) queue->cur = 0; + + /* Ensure the read of the valid bit occurs before reading any + * other bits of the CRQ entry + */ + rmb(); } else crq = NULL; spin_unlock_irqrestore(&queue->lock, flags); @@ -203,6 +208,11 @@ static int ibmvscsi_send_crq(struct ibmvscsi_host_data *hostdata, { struct vio_dev *vdev = to_vio_dev(hostdata->dev); + /* + * Ensure the command buffer is flushed to memory before handing it + * over to the VIOS to prevent it from fetching any stale data. + */ + mb(); return plpar_hcall_norets(H_SEND_CRQ, vdev->unit_address, word1, word2); } -- cgit v1.2.3 From cdda0e5acbb78f7b777049f8c27899e5c5bb368f Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 4 Jun 2014 13:34:56 +0200 Subject: virtio-scsi: avoid cancelling uninitialized work items Calling the workqueue interface on uninitialized work items isn't a good idea even if they're zeroed. It's not failing catastrophically only through happy accidents. Signed-off-by: Paolo Bonzini Reviewed-by: Stefan Hajnoczi Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig --- drivers/scsi/virtio_scsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 89ee5929eb6d..bcad917fd89a 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -253,6 +253,8 @@ static void virtscsi_ctrl_done(struct virtqueue *vq) virtscsi_vq_done(vscsi, &vscsi->ctrl_vq, virtscsi_complete_free); }; +static void virtscsi_handle_event(struct work_struct *work); + static int virtscsi_kick_event(struct virtio_scsi *vscsi, struct virtio_scsi_event_node *event_node) { @@ -260,6 +262,7 @@ static int virtscsi_kick_event(struct virtio_scsi *vscsi, struct scatterlist sg; unsigned long flags; + INIT_WORK(&event_node->work, virtscsi_handle_event); sg_init_one(&sg, &event_node->event, sizeof(struct virtio_scsi_event)); spin_lock_irqsave(&vscsi->event_vq.vq_lock, flags); @@ -377,7 +380,6 @@ static void virtscsi_complete_event(struct virtio_scsi *vscsi, void *buf) { struct virtio_scsi_event_node *event_node = buf; - INIT_WORK(&event_node->work, virtscsi_handle_event); schedule_work(&event_node->work); } -- cgit v1.2.3 From 8faeb529b2dabb9df691d614dda18910a43d05c9 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 4 Jun 2014 13:34:58 +0200 Subject: virtio-scsi: fix various bad behavior on aborted requests Even though the virtio-scsi spec guarantees that all requests related to the TMF will have been completed by the time the TMF itself completes, the request queue's callback might not have run yet. This causes requests to be completed more than once, and as a result triggers a variety of BUGs or oopses. Signed-off-by: Paolo Bonzini Reviewed-by: Venkatesh Srinivas Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig --- drivers/scsi/virtio_scsi.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index bcad917fd89a..308256b5e4cb 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -237,6 +237,16 @@ static void virtscsi_req_done(struct virtqueue *vq) virtscsi_vq_done(vscsi, req_vq, virtscsi_complete_cmd); }; +static void virtscsi_poll_requests(struct virtio_scsi *vscsi) +{ + int i, num_vqs; + + num_vqs = vscsi->num_queues; + for (i = 0; i < num_vqs; i++) + virtscsi_vq_done(vscsi, &vscsi->req_vqs[i], + virtscsi_complete_cmd); +} + static void virtscsi_complete_free(struct virtio_scsi *vscsi, void *buf) { struct virtio_scsi_cmd *cmd = buf; @@ -591,6 +601,18 @@ static int virtscsi_tmf(struct virtio_scsi *vscsi, struct virtio_scsi_cmd *cmd) cmd->resp.tmf.response == VIRTIO_SCSI_S_FUNCTION_SUCCEEDED) ret = SUCCESS; + /* + * The spec guarantees that all requests related to the TMF have + * been completed, but the callback might not have run yet if + * we're using independent interrupts (e.g. MSI). Poll the + * virtqueues once. + * + * In the abort case, sc->scsi_done will do nothing, because + * the block layer must have detected a timeout and as a result + * REQ_ATOM_COMPLETE has been set. + */ + virtscsi_poll_requests(vscsi); + out: mempool_free(cmd, virtscsi_cmd_pool); return ret; -- cgit v1.2.3 From 5616b0a46ed82eb9a093f752fc4d7bd3cc688583 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 24 Jun 2014 16:59:35 +0200 Subject: [SCSI] use the scsi data buffer length to extract transfer size Commit 8846bab180fa introduced a helper that can be used to query the wire transfer size for a SCSI command taking protection information into account. However, some commands do not have a 1:1 mapping between the block range they work on and the payload size (discard, write same). After the scatterlist has been set up these requests use __data_len to store the number of bytes to report completion on. This means that callers of scsi_transfer_length() would get the wrong byte count for these types of requests. To overcome this we make scsi_transfer_length() use the scatterlist length in the scsi_data_buffer as basis for the wire transfer calculation instead of __data_len. Reported-by: Christoph Hellwig Debugged-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Fixes: d77e65350f2d82dfa0557707d505711f5a43c8fd Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- include/scsi/scsi_cmnd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 42ed789ebafc..e0ae71098144 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -318,7 +318,7 @@ static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd) { - unsigned int xfer_len = blk_rq_bytes(scmd->request); + unsigned int xfer_len = scsi_out(scmd)->length; unsigned int prot_op = scsi_get_prot_op(scmd); unsigned int sector_size = scmd->device->sector_size; -- cgit v1.2.3