summaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)AuthorFilesLines
2019-10-03Merge tag 'kvmarm-fixes-5.4-1' of ↵Paolo Bonzini1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #1 - Remove the now obsolete hyp_alternate_select construct - Fix the TRACE_INCLUDE_PATH macro in the vgic code
2019-09-30kvm: x86, powerpc: do not allow clearing largepages debugfs entryPaolo Bonzini1-3/+7
The largepages debugfs entry is incremented/decremented as shadow pages are created or destroyed. Clearing it will result in an underflow, which is harmless to KVM but ugly (and could be misinterpreted by tools that use debugfs information), so make this particular statistic read-only. Cc: kvm-ppc@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-85/+305
Pull KVM updates from Paolo Bonzini: "s390: - ioctl hardening - selftests ARM: - ITS translation cache - support for 512 vCPUs - various cleanups and bugfixes PPC: - various minor fixes and preparation x86: - bugfixes all over the place (posted interrupts, SVM, emulation corner cases, blocked INIT) - some IPI optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits) KVM: X86: Use IPI shorthands in kvm guest when support KVM: x86: Fix INIT signal handling in various CPU states KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode KVM: VMX: Stop the preemption timer during vCPU reset KVM: LAPIC: Micro optimize IPI latency kvm: Nested KVM MMUs need PAE root too KVM: x86: set ctxt->have_exception in x86_decode_insn() KVM: x86: always stop emulation on page fault KVM: nVMX: trace nested VM-Enter failures detected by H/W KVM: nVMX: add tracepoint for failed nested VM-Enter x86: KVM: svm: Fix a check in nested_svm_vmrun() KVM: x86: Return to userspace with internal error on unexpected exit reason KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers doc: kvm: Fix return description of KVM_SET_MSRS KVM: X86: Tune PLE Window tracepoint KVM: VMX: Change ple_window type to unsigned int KVM: X86: Remove tailing newline for tracepoints KVM: X86: Trace vcpu_id for vmexit KVM: x86: Manually calculate reserved bits when loading PDPTRS ...
2019-09-18KVM: coalesced_mmio: add bounds checkingMatt Delco1-8/+11
The first/last indexes are typically shared with a user app. The app can change the 'last' index that the kernel uses to store the next result. This change sanity checks the index before using it for writing to a potentially arbitrary address. This fixes CVE-2019-14821. Cc: stable@vger.kernel.org Fixes: 5f94c1741bdc ("KVM: Add coalesced MMIO support (common part)") Signed-off-by: Matt Delco <delco@chromium.org> Signed-off-by: Jim Mattson <jmattson@google.com> Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com [Use READ_ONCE. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-11KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATHZenghui Yu1-1/+1
Commit 49dfe94fe5ad ("KVM: arm/arm64: Fix TRACE_INCLUDE_PATH") fixes TRACE_INCLUDE_PATH to the correct relative path to the define_trace.h and explains why did the old one work. The same fix should be applied to virt/kvm/arm/vgic/trace.h. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-09-09KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINEMarc Zyngier1-0/+2
While parts of the VGIC support a large number of vcpus (we bravely allow up to 512), other parts are more limited. One of these limits is visible in the KVM_IRQ_LINE ioctl, which only allows 256 vcpus to be signalled when using the CPU or PPI types. Unfortunately, we've cornered ourselves badly by allocating all the bits in the irq field. Since the irq_type subfield (8 bit wide) is currently only taking the values 0, 1 and 2 (and we have been careful not to allow anything else), let's reduce this field to only 4 bits, and allocate the remaining 4 bits to a vcpu2_index, which acts as a multiplier: vcpu_id = 256 * vcpu2_index + vcpu_index With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2) allowing this to be discovered, it becomes possible to inject PPIs to up to 4096 vcpus. But please just don't. Whilst we're there, add a clarification about the use of KVM_IRQ_LINE on arm, which is not completely conditionned by KVM_CAP_IRQCHIP. Reported-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-28Merge tag 'arm64-fixes' of ↵Linus Torvalds4-2/+33
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Hot on the heels of our last set of fixes are a few more for -rc7. Two of them are fixing issues with our virtual interrupt controller implementation in KVM/arm, while the other is a longstanding but straightforward kallsyms fix which was been acked by Masami and resolves an initialisation failure in kprobes observed on arm64. - Fix GICv2 emulation bug (KVM) - Fix deadlock in virtual GIC interrupt injection code (KVM) - Fix kprobes blacklist init failure due to broken kallsyms lookup" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol
2019-08-28KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WIMarc Zyngier3-2/+26
A guest is not allowed to inject a SGI (or clear its pending state) by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8). Make sure we correctly emulate the architecture. Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers") Cc: stable@vger.kernel.org # 4.7+ Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is longHeyi Guo1-0/+7
If the ap_list is longer than 256 entries, merge_final() in list_sort() will call the comparison callback with the same element twice, causing a deadlock in vgic_irq_cmp(). Fix it by returning early when irqa == irqb. Cc: stable@vger.kernel.org # 4.7+ Fixes: 8e4447457965 ("KVM: arm/arm64: vgic-new: Add IRQ sorting") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> [maz: massaged commit log and patch, added Fixes and Cc-stable] Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-25KVM: arm/arm64: vgic: Use a single IO device per redistributorEric Auger2-58/+24
At the moment we use 2 IO devices per GICv3 redistributor: one one for the RD_base frame and one for the SGI_base frame. Instead we can use a single IO device per redistributor (the 2 frames are contiguous). This saves slots on the KVM_MMIO_BUS which is currently limited to NR_IOBUS_DEVS (1000). This change allows to instantiate up to 512 redistributors and may speed the guest boot with a large number of VCPUs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-25KVM: arm/arm64: vgic: Remove spurious semicolonsMarc Zyngier1-1/+1
Detected by Coccinelle (and Will Deacon) using scripts/coccinelle/misc/semicolon.cocci. Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-24Merge tag 'kvmarm-fixes-for-5.3-3' of ↵Will Deacon2-10/+27
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm/fixes Pull KVM/arm fixes from Marc Zyngier as per Paulo's request at: https://lkml.kernel.org/r/21ae69a2-2546-29d0-bff6-2ea825e3d968@redhat.com "One (hopefully last) set of fixes for KVM/arm for 5.3: an embarassing MMIO emulation regression, and a UBSAN splat. Oh well... - Don't overskip instructions on MMIO emulation - Fix UBSAN splat when initializing PPI priorities" * tag 'kvmarm-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm: KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity KVM: arm/arm64: Only skip MMIO insn once
2019-08-23KVM: arm/arm64: VGIC: Properly initialise private IRQ affinityAndre Przywara1-10/+20
At the moment we initialise the target *mask* of a virtual IRQ to the VCPU it belongs to, even though this mask is only defined for GICv2 and quickly runs out of bits for many GICv3 guests. This behaviour triggers an UBSAN complaint for more than 32 VCPUs: ------ [ 5659.462377] UBSAN: Undefined behaviour in virt/kvm/arm/vgic/vgic-init.c:223:21 [ 5659.471689] shift exponent 32 is too large for 32-bit type 'unsigned int' ------ Also for GICv3 guests the reporting of TARGET in the "vgic-state" debugfs dump is wrong, due to this very same problem. Because there is no requirement to create the VGIC device before the VCPUs (and QEMU actually does it the other way round), we can't safely initialise mpidr or targets in kvm_vgic_vcpu_init(). But since we touch every private IRQ for each VCPU anyway later (in vgic_init()), we can just move the initialisation of those fields into there, where we definitely know the VGIC type. On the way make sure we really have either a VGICv2 or a VGICv3 device, since the existing code is just checking for "VGICv3 or not", silently ignoring the uninitialised case. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reported-by: Dave Martin <dave.martin@arm.com> Tested-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-22KVM: arm/arm64: Only skip MMIO insn onceAndrew Jones1-0/+7
If after an MMIO exit to userspace a VCPU is immediately run with an immediate_exit request, such as when a signal is delivered or an MMIO emulation completion is needed, then the VCPU completes the MMIO emulation and immediately returns to userspace. As the exit_reason does not get changed from KVM_EXIT_MMIO in these cases we have to be careful not to complete the MMIO emulation again, when the VCPU is eventually run again, because the emulation does an instruction skip (and doing too many skips would be a waste of guest code :-) We need to use additional VCPU state to track if the emulation is complete. As luck would have it, we already have 'mmio_needed', which even appears to be used in this way by other architectures already. Fixes: 0d640732dbeb ("arm64: KVM: Skip MMIO insn after emulation") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: Call kvm_arch_vcpu_blocking early into the blocking sequenceMarc Zyngier1-4/+3
When a vpcu is about to block by calling kvm_vcpu_block, we call back into the arch code to allow any form of synchronization that may be required at this point (SVN stops the AVIC, ARM synchronises the VMCR and enables GICv4 doorbells). But this synchronization comes in quite late, as we've potentially waited for halt_poll_ns to expire. Instead, let's move kvm_arch_vcpu_blocking() to the beginning of kvm_vcpu_block(), which on ARM has several benefits: - VMCR gets synchronised early, meaning that any interrupt delivered during the polling window will be evaluated with the correct guest PMR - GICv4 doorbells are enabled, which means that any guest interrupt directly injected during that window will be immediately recognised Tang Nianyao ran some tests on a GICv4 machine to evaluate such change, and reported up to a 10% improvement for netperf: <quote> netperf result: D06 as server, intel 8180 server as client with change: package 512 bytes - 5500 Mbits/s package 64 bytes - 760 Mbits/s without change: package 512 bytes - 5000 Mbits/s package 64 bytes - 710 Mbits/s </quote> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic: Make function comments match function declarationsAlexandru Elisei2-6/+8
Since commit 503a62862e8f ("KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware tables"), the vgic_v{2,3}_probe functions stopped using a DT node. Commit 909777324588 ("KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init") changed the functions again, and now they require exactly one argument, a struct gic_kvm_info populated by the GIC driver. Unfortunately the comments regressed and state that a DT node is used instead. Change the function comments to reflect the current prototypes. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic-irqfd: Implement kvm_arch_set_irq_inatomicMarc Zyngier1-6/+30
Now that we have a cache of MSI->LPI translations, it is pretty easy to implement kvm_arch_set_irq_inatomic (this cache can be parsed without sleeping). Hopefully, this will improve some LPI-heavy workloads. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic-its: Check the LPI translation cache on MSI injectionMarc Zyngier2-0/+37
When performing an MSI injection, let's first check if the translation is already in the cache. If so, let's inject it quickly without going through the whole translation process. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic-its: Cache successful MSI->LPI translationMarc Zyngier1-0/+86
On a successful translation, preserve the parameters in the LPI translation cache. Each translation is reusing the last slot in the list, naturally evicting the least recently used entry. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on vgic teardownMarc Zyngier1-0/+2
In order to avoid leaking vgic_irq structures on teardown, we need to drop all references to LPIs before deallocating the cache itself. This is done by invalidating the cache on vgic teardown. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on ITS disableMarc Zyngier1-0/+2
If an ITS gets disabled, we need to make sure that further interrupts won't hit in the cache. For that, we invalidate the translation cache when the ITS is disabled. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on disabling LPIsMarc Zyngier1-1/+3
If a vcpu disables LPIs at its redistributor level, we need to make sure we won't pend more interrupts. For this, we need to invalidate the LPI translation cache. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on specific ↵Marc Zyngier1-0/+9
commands The LPI translation cache needs to be discarded when an ITS command may affect the translation of an LPI (DISCARD, MAPC and MAPD with V=0) or the routing of an LPI to a redistributor with disabled LPIs (MOVI, MOVALL). We decide to perform a full invalidation of the cache, irrespective of the LPI that is affected. Commands are supposed to be rare enough that it doesn't matter. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic-its: Add MSI-LPI translation cache invalidationMarc Zyngier2-0/+24
There's a number of cases where we need to invalidate the caching of translations, so let's add basic support for that. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic: Add __vgic_put_lpi_locked primitiveMarc Zyngier2-9/+18
Our LPI translation cache needs to be able to drop the refcount on an LPI whilst already holding the lpi_list_lock. Let's add a new primitive for this. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18KVM: arm/arm64: vgic: Add LPI translation cache definitionMarc Zyngier3-0/+56
Add the basic data structure that expresses an MSI to LPI translation as well as the allocation/release hooks. The size of the cache is arbitrarily defined as 16*nr_vcpus. Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-09Merge tag 'kvmarm-fixes-for-5.3-2' of ↵Paolo Bonzini6-2/+54
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3, take #2 - Fix our system register reset so that we stop writing non-sensical values to them, and track which registers get reset instead. - Sync VMCR back from the GIC on WFI so that KVM has an exact vue of PMR. - Reevaluate state of HW-mapped, level triggered interrupts on enable.
2019-08-09Merge tag 'kvmarm-fixes-for-5.3' of ↵Paolo Bonzini3-3/+25
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3 - A bunch of switch/case fall-through annotation, fixing one actual bug - Fix PMU reset bug - Add missing exception class debug strings
2019-08-09kvm: remove unnecessary PageReserved checkPaolo Bonzini1-2/+1
The same check is already done in kvm_is_reserved_pfn. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-09KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enableAlexandru Elisei1-0/+16
A HW mapped level sensitive interrupt asserted by a device will not be put into the ap_list if it is disabled at the VGIC level. When it is enabled again, it will be inserted into the ap_list and written to a list register on guest entry regardless of the state of the device. We could argue that this can also happen on real hardware, when the command to enable the interrupt reached the GIC before the device had the chance to de-assert the interrupt signal; however, we emulate the distributor and redistributors in software and we can do better than that. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-05KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to blockMarc Zyngier5-2/+38
Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-05KVM: no need to check return value of debugfs_create functionsGreg KH1-16/+5
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, when doing this, change kvm_arch_create_vcpu_debugfs() to return void instead of an integer, as we should not care at all about if this function actually does anything or not. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: <kvm@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-05KVM: remove kvm_arch_has_vcpu_debugfs()Paolo Bonzini2-8/+2
There is no need for this function as all arches have to implement kvm_arch_create_vcpu_debugfs() no matter what. A #define symbol let us actually simplify the code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-05KVM: Fix leak vCPU's VMCS value into other pCPUWanpeng Li1-1/+24
After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting in the VMs after stress testing: INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073) Call Trace: flush_tlb_mm_range+0x68/0x140 tlb_flush_mmu.part.75+0x37/0xe0 tlb_finish_mmu+0x55/0x60 zap_page_range+0x142/0x190 SyS_madvise+0x3cd/0x9c0 system_call_fastpath+0x1c/0x21 swait_active() sustains to be true before finish_swait() is called in kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop greatly increases the probability condition kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv is enabled the yield-candidate vCPU's VMCS RVI field leaks(by vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current VMCS. This patch fixes it by checking conservatively a subset of events. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Marc Zyngier <Marc.Zyngier@arm.com> Cc: stable@vger.kernel.org Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop) Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-05KVM: Check preempted_in_kernel for involuntary preemptionWanpeng Li1-3/+4
preempted_in_kernel is updated in preempt_notifier when involuntary preemption ocurrs, it can be stale when the voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop. This patch lets it just check preempted_in_kernel for involuntary preemption. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-26KVM: arm: vgic-v3: Mark expected switch fall-throughAnders Roxell1-0/+8
When fall-through warnings was enabled by default the following warnings was starting to show up: ../virt/kvm/arm/hyp/vgic-v3-sr.c: In function ‘__vgic_v3_save_aprs’: ../virt/kvm/arm/hyp/vgic-v3-sr.c:351:24: warning: this statement may fall through [-Wimplicit-fallthrough=] cpu_if->vgic_ap0r[2] = __vgic_v3_read_ap0rn(2); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ ../virt/kvm/arm/hyp/vgic-v3-sr.c:352:2: note: here case 6: ^~~~ ../virt/kvm/arm/hyp/vgic-v3-sr.c:353:24: warning: this statement may fall through [-Wimplicit-fallthrough=] cpu_if->vgic_ap0r[1] = __vgic_v3_read_ap0rn(1); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ ../virt/kvm/arm/hyp/vgic-v3-sr.c:354:2: note: here default: ^~~~~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-24Documentation: move Documentation/virtual to Documentation/virtChristoph Hellwig3-4/+4
Renaming docs seems to be en vogue at the moment, so fix on of the grossly misnamed directories. We usually never use "virtual" as a shortcut for virtualization in the kernel, but always virt, as seen in the virt/ top-level directory. Fix up the documentation to match that. Fixes: ed16648eb5b8 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-23KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter indexZenghui Yu2-3/+17
We use "pmc->idx" and the "chained" bitmap to determine if the pmc is chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized (and random) when we doing this decision, through a KVM_ARM_VCPU_INIT ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random idx will potentially hit a KASAN BUG [1]. In general, idx is the static property of a PMU counter that is not expected to be modified across resets, as suggested by Julien. It looks more reasonable if we can setup the PMU counter idx for a vcpu in its creation time. Introduce a new function - kvm_pmu_vcpu_init() for this basic setup. Oh, and the KASAN BUG will get fixed this way. [1] https://www.spinics.net/lists/kvm-arm/msg36700.html Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Suggested-by: Andrew Murray <andrew.murray@arm.com> Suggested-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-20KVM: Boost vCPUs that are delivering interruptsWanpeng Li1-4/+8
Inspired by commit 9cac38dd5d (KVM/s390: Set preempted flag during vcpu wakeup and interrupt delivery), we want to also boost not just lock holders but also vCPUs that are delivering interrupts. Most smp_call_function_many calls are synchronous, so the IPI target vCPUs are also good yield candidates. This patch introduces vcpu->ready to boost vCPUs during wakeup and interrupt delivery time; unlike s390 we do not reuse vcpu->preempted so that voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin, but vmx_vcpu_pi_put is not affected (VT-d PI handles voluntary preemption separately, in pi_pre_block). Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM: ebizzy -M vanilla boosting improved 1VM 21443 23520 9% 2VM 2800 8000 180% 3VM 1800 3100 72% Testing on my Haswell desktop 8 HT, with 8 vCPUs VM 8GB RAM, two VMs, one running ebizzy -M, the other running 'stress --cpu 2': w/ boosting + w/o pv sched yield(vanilla) vanilla boosting improved 1570 4000 155% w/ boosting + w/ pv sched yield(vanilla) vanilla boosting improved 1844 5157 179% w/o boosting, perf top in VM: 72.33% [kernel] [k] smp_call_function_many 4.22% [kernel] [k] call_function_i 3.71% [kernel] [k] async_page_fault w/ boosting, perf top in VM: 38.43% [kernel] [k] smp_call_function_many 6.31% [kernel] [k] async_page_fault 6.13% libc-2.23.so [.] __memcpy_avx_unaligned 4.88% [kernel] [k] call_function_interrupt Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds6-120/+455
Pull KVM updates from Paolo Bonzini: "ARM: - support for chained PMU counters in guests - improved SError handling - handle Neoverse N1 erratum #1349291 - allow side-channel mitigation status to be migrated - standardise most AArch64 system register accesses to msr_s/mrs_s - fix host MPIDR corruption on 32bit - selftests ckleanups x86: - PMU event {white,black}listing - ability for the guest to disable host-side interrupt polling - fixes for enlightened VMCS (Hyper-V pv nested virtualization), - new hypercall to yield to IPI target - support for passing cstate MSRs through to the guest - lots of cleanups and optimizations Generic: - Some txt->rST conversions for the documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (128 commits) Documentation: virtual: Add toctree hooks Documentation: kvm: Convert cpuid.txt to .rst Documentation: virtual: Convert paravirt_ops.txt to .rst KVM: x86: Unconditionally enable irqs in guest context KVM: x86: PMU Event Filter kvm: x86: Fix -Wmissing-prototypes warnings KVM: Properly check if "page" is valid in kvm_vcpu_unmap KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register KVM: LAPIC: Retry tune per-vCPU timer_advance_ns if adaptive tuning goes insane kvm: LAPIC: write down valid APIC registers KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s KVM: doc: Add API documentation on the KVM_REG_ARM_WORKAROUNDS register KVM: arm/arm64: Add save/restore support for firmware workaround state arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests KVM: arm/arm64: Support chained PMU counters KVM: arm/arm64: Remove pmc->bitmask KVM: arm/arm64: Re-create event when setting counter value KVM: arm/arm64: Extract duplicated code to own function KVM: arm/arm64: Rename kvm_pmu_{enable/disable}_counter functions KVM: LAPIC: ARBPRI is a reserved register for x2APIC ...
2019-07-12arm64: switch to generic version of pte allocationMike Rapoport1-1/+1
The PTE allocations in arm64 are identical to the generic ones modulo the GFP flags. Using the generic pte_alloc_one() functions ensures that the user page tables are allocated with __GFP_ACCOUNT set. The arm64 definition of PGALLOC_GFP is removed and replaced with GFP_PGTABLE_USER for p[gum]d_alloc_one() for the user page tables and GFP_PGTABLE_KERNEL for the kernel page tables. The KVM memory cache is now using GFP_PGTABLE_USER. The mappings created with create_pgd_mapping() are now using GFP_PGTABLE_KERNEL. The conversion to the generic version of pte_free_kernel() removes the NULL check for pte. The pte_free() version on arm64 is identical to the generic one and can be simply dropped. [cai@lca.pw: fix a bogus GFP flag in pgd_alloc()] Link: https://lore.kernel.org/r/1559656836-24940-1-git-send-email-cai@lca.pw/ [and fix it more] Link: https://lore.kernel.org/linux-mm/20190617151252.GF16810@rapoport-lnx/ Link: http://lkml.kernel.org/r/1557296232-15361-5-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-11Merge tag 'kvm-arm-for-5.3' of ↵Paolo Bonzini31-443/+465
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for 5.3 - Add support for chained PMU counters in guests - Improve SError handling - Handle Neoverse N1 erratum #1349291 - Allow side-channel mitigation status to be migrated - Standardise most AArch64 system register accesses to msr_s/mrs_s - Fix host MPIDR corruption on 32bit
2019-07-10KVM: Properly check if "page" is valid in kvm_vcpu_unmapKarimAllah Ahmed1-1/+1
The field "page" is initialized to KVM_UNMAPPED_PAGE when it is not used (i.e. when the memory lives outside kernel control). So this check will always end up using kunmap even for memremap regions. Fixes: e45adf665a53 ("KVM: Introduce a new guest mapping API") Cc: stable@vger.kernel.org Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-08KVM: arm/arm64: Initialise host's MPIDRs by reading the actual registerMarc Zyngier1-1/+2
As part of setting up the host context, we populate its MPIDR by using cpu_logical_map(). It turns out that contrary to arm64, cpu_logical_map() on 32bit ARM doesn't return the *full* MPIDR, but a truncated version. This leaves the host MPIDR slightly corrupted after the first run of a VM, since we won't correctly restore the MPIDR on exit. Oops. Since we cannot trust cpu_logical_map(), let's adopt a different strategy. We move the initialization of the host CPU context as part of the per-CPU initialization (which, in retrospect, makes a lot of sense), and directly read the MPIDR from the HW. This is guaranteed to work on both arm and arm64. Reported-by: Andre Przywara <Andre.Przywara@arm.com> Tested-by: Andre Przywara <Andre.Przywara@arm.com> Fixes: 32f139551954 ("arm/arm64: KVM: Statically configure the host's view of MPIDR") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_sDave Martin1-12/+12
Currently, the {read,write}_sysreg_el*() accessors for accessing particular ELs' sysregs in the presence of VHE rely on some local hacks and define their system register encodings in a way that is inconsistent with the core definitions in <asm/sysreg.h>. As a result, it is necessary to add duplicate definitions for any system register that already needs a definition in sysreg.h for other reasons. This is a bit of a maintenance headache, and the reasons for the _el*() accessors working the way they do is a bit historical. This patch gets rid of the shadow sysreg definitions in <asm/kvm_hyp.h>, converts the _el*() accessors to use the core __msr_s/__mrs_s interface, and converts all call sites to use the standard sysreg #define names (i.e., upper case, with SYS_ prefix). This patch will conflict heavily anyway, so the opportunity to clean up some bad whitespace in the context of the changes is taken. The change exposes a few system registers that have no sysreg.h definition, due to msr_s/mrs_s being used in place of msr/mrs: additions are made in order to fill in the gaps. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://www.spinics.net/lists/kvm-arm/msg31717.html [Rebased to v4.21-rc1] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [Rebased to v5.2-rc5, changelog updates] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05KVM: arm/arm64: Add save/restore support for firmware workaround stateAndre Przywara1-15/+124
KVM implements the firmware interface for mitigating cache speculation vulnerabilities. Guests may use this interface to ensure mitigation is active. If we want to migrate such a guest to a host with a different support level for those workarounds, migration might need to fail, to ensure that critical guests don't loose their protection. Introduce a way for userland to save and restore the workarounds state. On restoring we do checks that make sure we don't downgrade our mitigation level. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05arm64: KVM: Propagate full Spectre v2 workaround state to KVM guestsAndre Przywara1-1/+9
Recent commits added the explicit notion of "workaround not required" to the state of the Spectre v2 (aka. BP_HARDENING) workaround, where we just had "needed" and "unknown" before. Export this knowledge to the rest of the kernel and enhance the existing kvm_arm_harden_branch_predictor() to report this new state as well. Export this new state to guests when they use KVM's firmware interface emulation. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05KVM: arm/arm64: Support chained PMU countersAndrew Murray1-37/+215
ARMv8 provides support for chained PMU counters, where an event type of 0x001E is set for odd-numbered counters, the event counter will increment by one for each overflow of the preceding even-numbered counter. Let's emulate this in KVM by creating a 64 bit perf counter when a user chains two emulated counters together. For chained events we only support generating an overflow interrupt on the high counter. We use the attributes of the low counter to determine the attributes of the perf event. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05KVM: arm/arm64: Remove pmc->bitmaskAndrew Murray1-10/+20
We currently use pmc->bitmask to determine the width of the pmc - however it's superfluous as the pmc index already describes if the pmc is a cycle counter or event counter. The architecture clearly describes the widths of these counters. Let's remove the bitmask to simplify the code. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05KVM: arm/arm64: Re-create event when setting counter valueAndrew Murray1-9/+33
The perf event sample_period is currently set based upon the current counter value, when PMXEVTYPER is written to and the perf event is created. However the user may choose to write the type before the counter value in which case sample_period will be set incorrectly. Let's instead decouple event creation from PMXEVTYPER and (re)create the event in either suitation. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>