summaryrefslogtreecommitdiff
path: root/sound/soc/sh/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2010-12-21ASoC: sh: fsi: modify improper dependentKuninori Morimoto1-2/+2
FSI-AK4642 and FSI-DA7210 are depend on I2C, not I2C_SH_MOBILE Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: fsi codecs: modify menu attribute on KconfigKuninori Morimoto1-3/+3
Current SND_FSI_xxx menu attributes were bool, but it should be tristate. This patch solve below report from Guennadi "bool" means, if someone is linking the whole ASoC into the kernel, they will not be able to build this as a module. Not a big deal, but you're stealing some freedom from the user. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-01ASoC: fsi-codec: Add FSI - HDMI supportKuninori Morimoto1-0/+7
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-06-16ASoC: Fix I2C dependency for SND_FSI_AK4642 and SND_FSI_DA7210Peter Huewe1-2/+2
The config option SND_FSI_AK4642 selects SND_SOC_AK4642 which in turn enables the compilation of ak4642.c - however this codec uses I2C to communicate with the HW. Same applies to DA7210. Consequently when I2C is not set, the compilation fails [1] This patch fixes this issues, by adding a depencdency on the related HW- controller. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-26ASoC: fsi: Add FSI2 device supportKuninori Morimoto1-2/+1
ARM-SHMOBILE series have FIFO-buffered serial interface 2 (FSI2) device which is advanced version of FSI. This patch add simple support for it. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18ASoC: SIU driver shall select FW_LOADERGuennadi Liakhovetski1-0/+1
The SIU ASoC driver must load firmware to program the DSP, therefore it has to select FW_LOADER in its Kconfig entry. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-12ASoC: fix compile breakage if CONFIG_SH_DMA_API=y && CONFIG_SND_SIU_MIGOR!=nGuennadi Liakhovetski1-0/+1
Audio on Migo-R cannot work if CONFIG_SH_DMA_API=y, but compilation should not break anyway. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-29ASoC: add support for the sh7722 Migo-R boardGuennadi Liakhovetski1-0/+8
Add support for audio on sh7722-based Migo-R boards, using SIU and wm8978 codec, recording via external microphone and playback via headphones are implemented. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-25ASoC: add DAI and platform / DMA drivers for SH SIUGuennadi Liakhovetski1-0/+6
Several SuperH platforms, including sh7722, sh7343, sh7354, sh7367 include a Sound Interface Unit (SIU). This patch adds DAI and platform / DMA drivers for this interface. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-16ASoC: Add FSI-DA7210 sound support for SuperHKuninori Morimoto1-0/+8
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-30ASoC: sh: FSI: Remove DMA supportKuninori Morimoto1-1/+0
SuperH FSI device have the hardware limitation to use DMA. If DMA is used, LCD output will be broken. Maybe there are some solution. But I don't know how to do it now. This patch remove DMA support and use soft transfer. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add FSI-AK4642 sound support for SuperHKuninori Morimoto1-0/+8
This patch is tested by ms7724se Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: Add SuperH FSI driver support for ALSAKuninori Morimoto1-1/+6
This driver is very simple. It support playback only now. This patch is tested by ms7724se board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-05-27sound: Convert to menuconfigTakashi Iwai1-3/+2
Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] Add SUPERH depends to sound/soc/sh/KconfigKristoffer Ericson1-0/+1
Currently you will see an empty "SoC Audio support for SuperH" menu when building for other archs (example pxa). This patch adds "depends on SUPERH" to remove that empty menu. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2007-07-20[ALSA] soc/sh: let SND_SOC_PCM_SH7760 depend on SH_DMABRGManuel Lauss1-2/+1
Let SND_SOC_PCM_SH7760 depend on SH_DMABRG rather than select'ing it. Gets rid of the Kbuild warning about SH_DMABRG being undefined on non-sh builds. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20[ALSA] SH7760 ASoC supportManuel Lauss1-0/+39
ALSA ASoC support for SH7760 This patch adds ALSA ASoC drivers for the Audio interfaces of the SH7760 SoC: Add driver for the SH7760 DMA engine (dmabrg) Add AC97 driver for HAC unit(s) found on SH7760/SH7780 Add I2S driver for SSI unit(s) found on SH7760/SH7780 Add a generic SH7760-AC97 machine driver. Hook it all up with the build system. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 03:35:04 +0000