summaryrefslogtreecommitdiff
path: root/net/ceph
AgeCommit message (Collapse)AuthorFilesLines
2014-11-13libceph: change from BUG to WARN for __remove_osd() assertsIlya Dryomov1-2/+2
No reason to use BUG_ON for osd request list assertions. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-11-13libceph: clear r_req_lru_item in __unregister_linger_request()Ilya Dryomov1-0/+2
kick_requests() can put linger requests on the notarget list. This means we need to clear the much-overloaded req->r_req_lru_item in __unregister_linger_request() as well, or we get an assertion failure in ceph_osdc_release_request() - !list_empty(&req->r_req_lru_item). AFAICT the assumption was that registered linger requests cannot be on any of req->r_req_lru_item lists, but that's clearly not the case. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-11-13libceph: unlink from o_linger_requests when clearing r_osdIlya Dryomov1-0/+1
Requests have to be unlinked from both osd->o_requests (normal requests) and osd->o_linger_requests (linger requests) lists when clearing req->r_osd. Otherwise __unregister_linger_request() gets confused and we trip over a !list_empty(&osd->o_linger_requests) assert in __remove_osd(). MON=1 OSD=1: # cat remove-osd.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 sleep 3 rbd map dne/dne # obtain a new osdmap as a side effect rbd unmap $DEV & # will block sleep 3 ceph osd in 0 Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-11-13libceph: do not crash on large auth ticketsIlya Dryomov1-37/+132
Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth tickets will have their buffers vmalloc'ed, which leads to the following crash in crypto: [ 28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0 [ 28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.686032] PGD 0 [ 28.688088] Oops: 0000 [#1] PREEMPT SMP [ 28.688088] Modules linked in: [ 28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305 [ 28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.688088] Workqueue: ceph-msgr con_work [ 28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000 [ 28.688088] RIP: 0010:[<ffffffff81392b42>] [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.688088] RSP: 0018:ffff8800d903f688 EFLAGS: 00010286 [ 28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0 [ 28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750 [ 28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880 [ 28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010 [ 28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000 [ 28.688088] FS: 00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000 [ 28.688088] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0 [ 28.688088] Stack: [ 28.688088] ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32 [ 28.688088] ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020 [ 28.688088] ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010 [ 28.688088] Call Trace: [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220 [ 28.688088] [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180 [ 28.688088] [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30 [ 28.688088] [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0 [ 28.688088] [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0 [ 28.688088] [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60 [ 28.688088] [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0 [ 28.688088] [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360 [ 28.688088] [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0 [ 28.688088] [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80 [ 28.688088] [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0 [ 28.688088] [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80 [ 28.688088] [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0 [ 28.688088] [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0 [ 28.688088] [<ffffffff81559289>] try_read+0x1e59/0x1f10 This is because we set up crypto scatterlists as if all buffers were kmalloc'ed. Fix it. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-31libceph: eliminate unnecessary allocation in process_one_ticket()Ilya Dryomov1-15/+10
Commit c27a3e4d667f ("libceph: do not hard code max auth ticket len") while fixing a buffer overlow tried to keep the same as much of the surrounding code as possible and introduced an unnecessary kmalloc() in the unencrypted ticket path. It is likely to fail on huge tickets, so get rid of it. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-30libceph: use memalloc flags for net IOMike Christie1-1/+9
This patch has ceph's lib code use the memalloc flags. If the VM layer needs to write data out to free up memory to handle new allocation requests, the block layer must be able to make forward progress. To handle that requirement we use structs like mempools to reserve memory for objects like bios and requests. The problem is when we send/receive block layer requests over the network layer, net skb allocations can fail and the system can lock up. To solve this, the memalloc related flags were added. NBD, iSCSI and NFS uses these flags to tell the network/vm layer that it should use memory reserves to fullfill allcation requests for structs like skbs. I am running ceph in a bunch of VMs in my laptop, so this patch was not tested very harshly. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-15Merge branch 'for-linus' of ↵Linus Torvalds9-228/+153
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "There is the long-awaited discard support for RBD (Guangliang Zhao, Josh Durgin), a pile of RBD bug fixes that didn't belong in late -rc's (Ilya Dryomov, Li RongQing), a pile of fs/ceph bug fixes and performance and debugging improvements (Yan, Zheng, John Spray), and a smattering of cleanups (Chao Yu, Fabian Frederick, Joe Perches)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (40 commits) ceph: fix divide-by-zero in __validate_layout() rbd: rbd workqueues need a resque worker libceph: ceph-msgr workqueue needs a resque worker ceph: fix bool assignments libceph: separate multiple ops with commas in debugfs output libceph: sync osd op definitions in rados.h libceph: remove redundant declaration ceph: additional debugfs output ceph: export ceph_session_state_name function ceph: include the initial ACL in create/mkdir/mknod MDS requests ceph: use pagelist to present MDS request data libceph: reference counting pagelist ceph: fix llistxattr on symlink ceph: send client metadata to MDS ceph: remove redundant code for max file size verification ceph: remove redundant io_iter_advance() ceph: move ceph_find_inode() outside the s_mutex ceph: request xattrs if xattr_version is zero rbd: set the remaining discard properties to enable support rbd: use helpers to handle discard for layered images correctly ...
2014-10-14libceph: ceph-msgr workqueue needs a resque workerIlya Dryomov1-1/+5
Commit f363e45fd118 ("net/ceph: make ceph_msgr_wq non-reentrant") effectively removed WQ_MEM_RECLAIM flag from ceph_msgr_wq. This is wrong - libceph is very much a memory reclaim path, so restore it. Cc: stable@vger.kernel.org # needs backporting for < 3.12 Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Tested-by: Micha Krause <micha@krausam.de> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14libceph: separate multiple ops with commas in debugfs outputIlya Dryomov1-1/+2
For requests with multiple ops, separate ops with commas instead of \t, which is a field separator here. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14libceph: sync osd op definitions in rados.hIlya Dryomov2-132/+8
Bring in missing osd ops and strings, use macros to eliminate multiple points of maintenance. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14libceph: reference counting pagelistYan, Zheng2-5/+6
this allow pagelist to present data that may be sent multiple times. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14libceph: don't try checking queue_work() return valueIlya Dryomov1-10/+5
queue_work() doesn't "fail to queue", it returns false if work was already on a queue, which can't happen here since we allocate event_work right before we queue it. So don't bother at all. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14libceph: Convert pr_warning to pr_warnJoe Perches5-37/+39
Use the more common pr_warn. Other miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-10-14libceph: fix a use after free issue in osdmap_set_max_osdLi RongQing1-16/+16
If the state variable is krealloced successfully, map->osd_state will be freed, once following two reallocation failed, and exit the function without resetting map->osd_state, map->osd_state become a wild pointer. fix it by resetting them after krealloc successfully. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-10-14libceph: select CRYPTO_CBC in addition to CRYPTO_AESIlya Dryomov1-0/+1
We want "cbc(aes)" algorithm, so select CRYPTO_CBC too, not just CRYPTO_AES. Otherwise on !CRYPTO_CBC kernels we fail rbd map/mount with libceph: error -2 building auth method x request Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-10-14libceph: resend lingering requests with a new tidIlya Dryomov1-19/+54
Both not yet registered (r_linger && list_empty(&r_linger_item)) and registered linger requests should use the new tid on resend to avoid the dup op detection logic on the OSDs, yet we were doing this only for "registered" case. Factor out and simplify the "registered" logic and use the new helper for "not registered" case as well. Fixes: http://tracker.ceph.com/issues/8806 Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14libceph: abstract out ceph_osd_request enqueue logicIlya Dryomov1-7/+17
Introduce __enqueue_request() and switch to it. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-12Merge branch 'next' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris. Mostly ima, selinux, smack and key handling updates. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits) integrity: do zero padding of the key id KEYS: output last portion of fingerprint in /proc/keys KEYS: strip 'id:' from ca_keyid KEYS: use swapped SKID for performing partial matching KEYS: Restore partial ID matching functionality for asymmetric keys X.509: If available, use the raw subjKeyId to form the key description KEYS: handle error code encoded in pointer selinux: normalize audit log formatting selinux: cleanup error reporting in selinux_nlmsg_perm() KEYS: Check hex2bin()'s return when generating an asymmetric key ID ima: detect violations for mmaped files ima: fix race condition on ima_rdwr_violation_check and process_measurement ima: added ima_policy_flag variable ima: return an error code from ima_add_boot_aggregate() ima: provide 'ima_appraise=log' kernel option ima: move keyring initialization to ima_init() PKCS#7: Handle PKCS#7 messages that contain no X.509 certs PKCS#7: Better handling of unsupported crypto KEYS: Overhaul key identification when searching for asymmetric keys KEYS: Implement binary asymmetric key ID handling ...
2014-09-16KEYS: Remove key_type::match in favour of overriding default by match_preparseDavid Howells1-1/+0
A previous patch added a ->match_preparse() method to the key type. This is allowed to override the function called by the iteration algorithm. Therefore, we can just set a default that simply checks for an exact match of the key description with the original criterion data and allow match_preparse to override it as needed. The key_type::match op is then redundant and can be removed, as can the user_match() function. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-10libceph: do not hard code max auth ticket lenIlya Dryomov1-35/+29
We hard code cephx auth ticket buffer size to 256 bytes. This isn't enough for any moderate setups and, in case tickets themselves are not encrypted, leads to buffer overflows (ceph_x_decrypt() errors out, but ceph_decode_copy() doesn't - it's just a memcpy() wrapper). Since the buffer is allocated dynamically anyway, allocated it a bit later, at the point where we know how much is going to be needed. Fixes: http://tracker.ceph.com/issues/8979 Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-10libceph: add process_one_ticket() helperIlya Dryomov1-104/+124
Add a helper for processing individual cephx auth tickets. Needed for the next commit, which deals with allocating ticket buffers. (Most of the diff here is whitespace - view with git diff -b). Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-10libceph: gracefully handle large reply messages from the monSage Weil1-0/+8
We preallocate a few of the message types we get back from the mon. If we get a larger message than we are expecting, fall back to trying to allocate a new one instead of blindly using the one we have. CC: stable@vger.kernel.org Signed-off-by: Sage Weil <sage@redhat.com> Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-08-13Merge branch 'for-linus' of ↵Linus Torvalds2-55/+121
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "There is a lot of refactoring and hardening of the libceph and rbd code here from Ilya that fix various smaller bugs, and a few more important fixes with clone overlap. The main fix is a critical change to the request_fn handling to not sleep that was exposed by the recent mutex changes (which will also go to the 3.16 stable series). Yan Zheng has several fixes in here for CephFS fixing ACL handling, time stamps, and request resends when the MDS restarts. Finally, there are a few cleanups from Himangi Saraogi based on Coccinelle" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (39 commits) libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly rbd: remove extra newlines from rbd_warn() messages rbd: allocate img_request with GFP_NOIO instead GFP_ATOMIC rbd: rework rbd_request_fn() ceph: fix kick_requests() ceph: fix append mode write ceph: fix sizeof(struct tYpO *) typo ceph: remove redundant memset(0) rbd: take snap_id into account when reading in parent info rbd: do not read in parent info before snap context rbd: update mapping size only on refresh rbd: harden rbd_dev_refresh() and callers a bit rbd: split rbd_dev_spec_update() into two functions rbd: remove unnecessary asserts in rbd_dev_image_probe() rbd: introduce rbd_dev_header_info() rbd: show the entire chain of parent images ceph: replace comma with a semicolon rbd: use rbd_segment_name_free() instead of kfree() ceph: check zero length in ceph_sync_read() ceph: reset r_resend_mds after receiving -ESTALE ...
2014-08-09libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctlyIlya Dryomov1-1/+1
Determining ->last_piece based on the value of ->page_offset + length is incorrect because length here is the length of the entire message. ->last_piece set to false even if page array data item length is <= PAGE_SIZE, which results in invalid length passed to ceph_tcp_{send,recv}page() and causes various asserts to fire. # cat pages-cursor-init.sh #!/bin/bash rbd create --size 10 --image-format 2 foo FOO_DEV=$(rbd map foo) dd if=/dev/urandom of=$FOO_DEV bs=1M &>/dev/null rbd snap create foo@snap rbd snap protect foo@snap rbd clone foo@snap bar # rbd_resize calls librbd rbd_resize(), size is in bytes ./rbd_resize bar $(((4 << 20) + 512)) rbd resize --size 10 bar BAR_DEV=$(rbd map bar) # trigger a 512-byte copyup -- 512-byte page array data item dd if=/dev/urandom of=$BAR_DEV bs=1M count=1 seek=5 The problem exists only in ceph_msg_data_pages_cursor_init(), ceph_msg_data_pages_advance() does the right thing. The size_t cast is unnecessary. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-22KEYS: Ceph: Use user_match()David Howells1-6/+2
Ceph can use user_match() instead of defining its own identical function. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> cc: Tommi Virtanen <tommi.virtanen@dreamhost.com>
2014-07-22KEYS: Ceph: Use key preparsingDavid Howells1-9/+15
Make use of key preparsing in Ceph so that quota size determination can take place prior to keyring locking when a key is being added. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> cc: Tommi Virtanen <tommi.virtanen@dreamhost.com>
2014-07-08libceph: drop osd ref when canceling con workIlya Dryomov1-4/+10
queue_con() bumps osd ref count. We should do the reverse when canceling con work. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: nuke ceph_osdc_unregister_linger_request()Ilya Dryomov1-10/+0
Remove now unused ceph_osdc_unregister_linger_request(). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: introduce ceph_osdc_cancel_request()Ilya Dryomov1-6/+25
Introduce ceph_osdc_cancel_request() intended for canceling requests from the higher layers (rbd and cephfs). Because higher layers are in charge and are supposed to know what and when they are canceling, the request is not completed, only unref'ed and removed from the libceph data structures. __cancel_request() is no longer called before __unregister_request(), because __unregister_request() unconditionally revokes r_request and there is no point in trying to do it twice. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: fix linger request check in __unregister_request()Ilya Dryomov1-1/+1
We should check if request is on the linger request list of any of the OSDs, not whether request is registered or not. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: unregister only registered linger requestsIlya Dryomov1-5/+14
Linger requests that have not yet been registered should not be unregistered by __unregister_linger_request(). This messes up ref count and leads to use-after-free. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: assert both regular and lingering lists in __remove_osd()Ilya Dryomov1-0/+2
It is important that both regular and lingering requests lists are empty when the OSD is removed. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: harden ceph_osdc_request_release() a bitIlya Dryomov1-0/+7
Add some WARN_ONs to alert us when we try to destroy requests that are still registered. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: move and add dout()s to ceph_osdc_request_{get,put}()Ilya Dryomov1-4/+22
Add dout()s to ceph_osdc_request_{get,put}(). Also move them to .c and turn kref release callback into a static function. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: move and add dout()s to ceph_msg_{get,put}()Ilya Dryomov1-9/+22
Add dout()s to ceph_msg_{get,put}(). Also move them to .c and turn kref release callback into a static function. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: add maybe_move_osd_to_lru() and switch to itIlya Dryomov1-12/+14
Abstract out __move_osd_to_lru() logic from __unregister_request() and __unregister_linger_request(). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-07-08libceph: rename ceph_osd_request::r_linger_osd to r_linger_osd_itemIlya Dryomov1-4/+4
So that: req->r_osd_item --> osd->o_requests list req->r_linger_osd_item --> osd->o_linger_requests list Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-06-12Merge branch 'for-linus' of ↵Linus Torvalds3-7/+153
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "This has a mix of bug fixes and cleanups. Alex's patch fixes a rare race in RBD. Ilya's patches fix an ENOENT check when a second rbd image is mapped and a couple memory leaks. Zheng fixes several issues with fragmented directories and multiple MDSs. Josh fixes a spin/sleep issue, and Josh and Guangliang's patches fix setting and unsetting RBD images read-only. Naturally there are several other cleanups mixed in for good measure" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits) rbd: only set disk to read-only once rbd: move calls that may sleep out of spin lock range rbd: add ioctl for rbd ceph: use truncate_pagecache() instead of truncate_inode_pages() ceph: include time stamp in every MDS request rbd: fix ida/idr memory leak rbd: use reference counts for image requests rbd: fix osd_request memory leak in __rbd_dev_header_watch_sync() rbd: make sure we have latest osdmap on 'rbd map' libceph: add ceph_monc_wait_osdmap() libceph: mon_get_version request infrastructure libceph: recognize poolop requests in debugfs ceph: refactor readpage_nounlock() to make the logic clearer mds: check cap ID when handling cap export message ceph: remember subtree root dirfrag's auth MDS ceph: introduce ceph_fill_fragtree() ceph: handle cap import atomically ceph: pre-allocate ceph_cap struct for ceph_add_cap() ceph: update inode fields according to issued caps rbd: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO ...
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-12Merge commit '9f12600fe425bc28f0ccba034a77783c09c15af4' into for-linusAl Viro2-1/+24
Backmerge of dcache.c changes from mainline. It's that, or complete rebase... Conflicts: fs/splice.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-11ceph: remove bogus externstephen hemminger1-1/+1
Sparse complained about this bogus extern on definition of a function. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06libceph: add ceph_monc_wait_osdmap()Ilya Dryomov1-0/+27
Add ceph_monc_wait_osdmap(), which will block until the osdmap with the specified epoch is received or timeout occurs. Export both of these as they are going to be needed by rbd. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-06-06libceph: mon_get_version request infrastructureIlya Dryomov3-5/+122
Add support for mon_get_version requests to libceph. This reuses much of the ceph_mon_generic_request infrastructure, with one exception. Older OSDs don't set mon_get_version reply hdr->tid even if the original request had a non-zero tid, which makes it impossible to lookup ceph_mon_generic_request contexts by tid in get_generic_reply() for such replies. As a workaround, we allocate a reply message on the reply path. This can probably interfere with revoke, but I don't see a better way. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-06-06libceph: recognize poolop requests in debugfsIlya Dryomov1-2/+4
Recognize poolop requests in debugfs monc dump, fix prink format specifiers - tid is unsigned. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-05-16crush: decode and initialize chooseleaf_vary_rIlya Dryomov1-0/+5
Commit e2b149cc4ba0 ("crush: add chooseleaf_vary_r tunable") added the crush_map::chooseleaf_vary_r field but missed the decode part. This lead to misdirected requests caused by incorrect raw crush mapping sets. Fixes: http://tracker.ceph.com/issues/8226 Reported-and-Tested-by: Dmitry Smirnov <onlyjob@member.fsf.org> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-05-16libceph: fix corruption when using page_count 0 page in rbdChunwei Chen1-1/+19
It has been reported that using ZFSonLinux on rbd will result in memory corruption. The bug report can be found here: https://github.com/zfsonlinux/spl/issues/241 http://tracker.ceph.com/issues/7790 The reason is that ZFS will send pages with page_count 0 into rbd, which in turns send them to tcp_sendpage. However, tcp_sendpage cannot deal with page_count 0, as it will do get_page and put_page, and erroneously free the page. This type of issue has been noted before, and handled in iscsi, drbd, etc. So, rbd should also handle this. This fix address this issue by fall back to slower sendmsg when page_count 0 detected. Cc: Sage Weil <sage@inktank.com> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: stable@vger.kernel.org Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-05-06ceph_sync_read: stop poking into iov_iter gutsAl Viro1-31/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-05Merge branch 'for-linus' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "First, there is a critical fix for the new primary-affinity function that went into -rc1. The second batch of patches from Zheng fix a range of problems with directory fragmentation, readdir, and a few odds and ends for cephfs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: reserve caps for file layout/lock MDS requests ceph: avoid releasing caps that are being used ceph: clear directory's completeness when creating file libceph: fix non-default values check in apply_primary_affinity() ceph: use fpos_cmp() to compare dentry positions ceph: check directory's completeness before emitting directory entry
2014-04-28libceph: fix non-default values check in apply_primary_affinity()Ilya Dryomov1-4/+5
osd_primary_affinity array is indexed into incorrectly when checking for non-default primary-affinity values. This nullifies the impact of the rest of the apply_primary_affinity() and results in misdirected requests. if (osds[i] != CRUSH_ITEM_NONE && osdmap->osd_primary_affinity[i] != ^^^ CEPH_OSD_DEFAULT_PRIMARY_AFFINITY) { For a pool with size 2, this always ends up checking osd0 and osd1 primary_affinity values, instead of the values that correspond to the osds in question. E.g., given a [2,3] up set and a [max,max,0,max] primary affinity vector, requests are still sent to osd2, because both osd0 and osd1 happen to have max primary_affinity values and therefore we return from apply_primary_affinity() early on the premise that all osds in the given set have max (default) values. Fix it. Fixes: http://tracker.ceph.com/issues/7954 Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller1-1/+1
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 11:51:54 +0000