| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
|
|
Commit b38460bc463c ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.
So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the introduction of stack depot evictions, each stack record is now
fixed size, so that future reuse after an eviction can safely store
differently sized stack traces. In all cases that do not make use of
evictions, this wastes lots of space.
Fix it by re-introducing variable size stack records (up to the max
allowed size) for entries that will never be evicted. We know if an entry
will never be evicted if the flag STACK_DEPOT_FLAG_GET is not provided,
since a later stack_depot_put() attempt is undefined behavior.
With my current kernel config that enables KASAN and also SLUB owner
tracking, I observe (after a kernel boot) a whopping reduction of 296
stack depot pools, which translates into 4736 KiB saved. The savings here
are from SLUB owner tracking only, because KASAN generic mode still uses
refcounting.
Before:
pools: 893
allocations: 29841
frees: 6524
in_use: 23317
freelist_size: 3454
After:
pools: 597
refcounted_allocations: 17547
refcounted_frees: 6477
refcounted_in_use: 11070
freelist_size: 3497
persistent_count: 12163
persistent_bytes: 1717008
[elver@google.com: fix -Wstringop-overflow warning]
Link: https://lore.kernel.org/all/20240201135747.18eca98e@canb.auug.org.au/
Link: https://lkml.kernel.org/r/20240201090434.1762340-1-elver@google.com
Link: https://lore.kernel.org/all/CABXGCsOzpRPZGg23QqJAzKnqkZPKzvieeg=W7sgjgi3q0pBo0g@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240129100708.39460-1-elver@google.com
Link: https://lore.kernel.org/all/CABXGCsOzpRPZGg23QqJAzKnqkZPKzvieeg=W7sgjgi3q0pBo0g@mail.gmail.com/
Fixes: 108be8def46e ("lib/stackdepot: allow users to evict stack traces")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline]
BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline]
BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline]
BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631
nla_validate_range_unsigned lib/nlattr.c:222 [inline]
nla_validate_int_range lib/nlattr.c:336 [inline]
validate_nla lib/nlattr.c:575 [inline]
...
The message in question matches this policy:
[NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255),
but because NLA_BE32 size in minlen array is 0, the validation
code will read past the malformed (too small) attribute.
Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing:
those likely should be added too.
Reported-by: syzbot+3f497b07aa3baf2fb4d0@syzkaller.appspotmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/all/CABOYnLzFYHSnvTyS6zGa-udNX55+izqkOt2sB9WDqUcEGW6n8w@mail.gmail.com/raw
Fixes: ecaf75ffd5f5 ("netlink: introduce bigendian integer types")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240221172740.5092-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trying to run the iov_iter unit test on a nommu system such as the qemu
kc705-nommu emulation results in a crash.
KTAP version 1
# Subtest: iov_iter
# module: kunit_iov_iter
1..9
BUG: failure at mm/nommu.c:318/vmap()!
Kernel panic - not syncing: BUG!
The test calls vmap() directly, but vmap() is not supported on nommu
systems, causing the crash. TEST_IOV_ITER therefore needs to depend on
MMU.
Link: https://lkml.kernel.org/r/20240208153010.1439753-1-linux@roeck-us.net
Fixes: 2d71340ff1d4 ("iov_iter: Kunit tests for copying to/from an iterator")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core fixes, a kobject fix, and a documentation
update for 6.8-rc5. In detail these changes are:
- devlink fixes for reported issues with 6.8-rc1
- topology scheduling regression fix that has been reported by many
- kobject loosening of checks change in -rc1 is now reverted as some
codepaths seemed to need the checks
- documentation update for the CVE process. Has been reviewed by
many, the last minute change to the document was to bring the .rst
format back into the the new style rules, the contents did not
change.
All of these, except for the documentation update, have been in
linux-next for over a week. The documentation update has been reviewed
for weeks by a group of developers, and in public for a week and the
wording has stabilized for now. If future changes are needed, we can
do so before 6.8-final is out (or anytime after that)"
* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Document the Linux Kernel CVE process
Revert "kobject: Remove redundant checks for whether ktype is NULL"
driver core: fw_devlink: Improve logs for cycle detection
driver core: fw_devlink: Improve detection of overlapping cycles
driver core: Fix device_link_flag_is_sync_state_only()
topology: Set capacity_freq_ref in all cases
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the #ifndef that didn't have the 'CONFIG_' prefix on
HAVE_DYNAMIC_FTRACE_WITH_REGS
The fix to have dynamic trampolines work with x86 broke arm64 as the
config used in the #ifdef was HAVE_DYNAMIC_FTRACE_WITH_REGS and not
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which removed the fix that the
previous fix was to fix.
- Fix tracing_on state
The code to test if "tracing_on" is set incorrectly used
ring_buffer_record_is_on() which returns false if the ring buffer
isn't able to be written to.
But the ring buffer disable has several bits that disable it. One is
internal disabling which is used for resizing and other modifications
of the ring buffer. But the "tracing_on" user space visible flag
should only report if tracing is actually on and not internally
disabled, as this can cause confusion as writing "1" when it is
disabled will not enable it.
Instead use ring_buffer_record_is_set_on() which shows the user space
visible settings.
- Fix a false positive kmemleak on saved cmdlines
Now that the saved_cmdlines structure is allocated via alloc_page()
and not via kmalloc() it has become invisible to kmemleak. The
allocation done to one of its pointers was flagged as a dangling
allocation leak. Make kmemleak aware of this allocation and free.
- Fix synthetic event dynamic strings
An update that cleaned up the synthetic event code removed the return
value of trace_string(), and had it return zero instead of the
length, causing dynamic strings in the synthetic event to always have
zero size.
- Clean up documentation and header files for seq_buf
* tag 'trace-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
seq_buf: Fix kernel documentation
seq_buf: Don't use "proxy" headers
tracing/synthetic: Fix trace_string() return value
tracing: Inform kmemleak of saved_cmdlines allocation
tracing: Use ring_buffer_record_is_set_on() in tracer_tracing_is_on()
tracing: Fix HAVE_DYNAMIC_FTRACE_WITH_REGS ifdef
|
|
There are plenty of issues with the kernel documentation here:
- misspelled word "sequence"
- different style of returned value descriptions
- missed Return sections
- unaligned style of ASCII / NUL-terminated / etc
- wrong function references
Fix all these.
Link: https://lkml.kernel.org/r/20240215152506.598340-1-andriy.shevchenko@linux.intel.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Link: https://lkml.kernel.org/r/20240215142255.400264-1-andriy.shevchenko@linux.intel.com
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fix from Shuah Khan:
"One important fix to unregister kunit_bus when KUnit module is
unloaded.
Not doing so causes an error when KUnit module tries to re-register
the bus when it gets reloaded"
* tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: device: Unregister the kunit_bus on shutdown
|
|
This reverts commit 1b28cb81dab7c1eedc6034206f4e8d644046ad31.
It is reported to cause problems, so revert it for now until the root
cause can be found.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 1b28cb81dab7 ("kobject: Remove redundant checks for whether ktype is NULL")
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Closes: https://lore.kernel.org/oe-lkp/202402071403.e302e33a-oliver.sang@intel.com
Link: https://lore.kernel.org/r/2024020849-consensus-length-6264@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If KUnit is built as a module, and it's unloaded, the kunit_bus is not
unregistered. This causes an error if it's then re-loaded later, as we
try to re-register the bus.
Unregister the bus and root_device on shutdown, if it looks valid.
In addition, be more specific about the value of kunit_bus_device. It
is:
- a valid struct device* if the kunit_bus initialised correctly.
- an ERR_PTR if it failed to initialise.
- NULL before initialisation and after shutdown.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"NULL vs IS_ERR() bug fixes, documentation update, MAINTAINERS file
update to add Rae Moar as a reviewer, and a fix to run test suites
only after module initialization completes"
* tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Update the instructions on how to test static functions
kunit: run test suites only after module initialization completes
MAINTAINERS: kunit: Add Rae Moar as a reviewer
kunit: device: Fix a NULL vs IS_ERR() check in init()
kunit: Fix a NULL vs IS_ERR() bug
|
|
With the introduction of the pool_rwlock (reader-writer lock), several
fast paths end up taking the pool_rwlock as readers. Furthermore,
stack_depot_put() unconditionally takes the pool_rwlock as a writer.
Despite allowing readers to make forward-progress concurrently,
reader-writer locks have inherent cache contention issues, which does not
scale well on systems with large CPU counts.
Rework the synchronization story of stack depot to again avoid taking any
locks in the fast paths. This is done by relying on RCU-protected list
traversal, and the NMI-safe subset of RCU to delay reuse of freed stack
records. See code comments for more details.
Along with the performance issues, this also fixes incorrect nesting of
rwlock within a raw_spinlock, given that stack depot should still be
usable from anywhere:
| [ BUG: Invalid wait context ]
| -----------------------------
| swapper/0/1 is trying to lock:
| ffffffff89869be8 (pool_rwlock){..--}-{3:3}, at: stack_depot_save_flags
| other info that might help us debug this:
| context-{5:5}
| 2 locks held by swapper/0/1:
| #0: ffffffff89632440 (rcu_read_lock){....}-{1:3}, at: __queue_work
| #1: ffff888100092018 (&pool->lock){-.-.}-{2:2}, at: __queue_work <-- raw_spin_lock
Stack depot usage stats are similar to the previous version after a KASAN
kernel boot:
$ cat /sys/kernel/debug/stackdepot/stats
pools: 838
allocations: 29865
frees: 6604
in_use: 23261
freelist_size: 1879
The number of pools is the same as previously. The freelist size is
minimally larger, but this may also be due to variance across system
boots. This shows that even though we do not eagerly wait for the next
RCU grace period (such as with synchronize_rcu() or call_rcu()) after
freeing a stack record - requiring depot_pop_free() to "poll" if an entry
may be used - new allocations are very likely to happen in later RCU grace
periods.
Link: https://lkml.kernel.org/r/20240118110216.2539519-2-elver@google.com
Fixes: 108be8def46e ("lib/stackdepot: allow users to evict stack traces")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a few basic stats counters for stack depot that can be used to derive
if stack depot is working as intended. This is a snapshot of the new
stats after booting a system with a KASAN-enabled kernel:
$ cat /sys/kernel/debug/stackdepot/stats
pools: 838
allocations: 29861
frees: 6561
in_use: 23300
freelist_size: 1840
Generally, "pools" should be well below the max; once the system is
booted, "in_use" should remain relatively steady.
Link: https://lkml.kernel.org/r/20240118110216.2539519-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in
kunit_free_suite_set()") fixed a wild-memory-access bug that could have
happened during the loading phase of test suites built and executed as
loadable modules. However, it also introduced a problematic side effect
that causes test suites modules to crash when they attempt to register
fake devices.
When a module is loaded, it traverses the MODULE_STATE_UNFORMED and
MODULE_STATE_COMING states before reaching the normal operating state
MODULE_STATE_LIVE. Finally, when the module is removed, it moves to
MODULE_STATE_GOING before being released. However, if the loading
function load_module() fails between complete_formation() and
do_init_module(), the module goes directly from MODULE_STATE_COMING to
MODULE_STATE_GOING without passing through MODULE_STATE_LIVE.
This behavior was causing kunit_module_exit() to be called without
having first executed kunit_module_init(). Since kunit_module_exit() is
responsible for freeing the memory allocated by kunit_module_init()
through kunit_filter_suites(), this behavior was resulting in a
wild-memory-access bug.
Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in
kunit_free_suite_set()") fixed this issue by running the tests when the
module is still in MODULE_STATE_COMING. However, modules in that state
are not fully initialized, lacking sysfs kobjects. Therefore, if a test
module attempts to register a fake device, it will inevitably crash.
This patch proposes a different approach to fix the original
wild-memory-access bug while restoring the normal module execution flow
by making kunit_module_exit() able to detect if kunit_module_init() has
previously initialized the tests suite set. In this way, test modules
can once again register fake devices without crashing.
This behavior is achieved by checking whether mod->kunit_suites is a
virtual or direct mapping address. If it is a virtual address, then
kunit_module_init() has allocated the suite_set in kunit_filter_suites()
using kmalloc_array(). On the contrary, if mod->kunit_suites is still
pointing to the original address that was set when looking up the
.kunit_test_suites section of the module, then the loading phase has
failed and there's no memory to be freed.
v4:
- rebased on 6.8
- noted that kunit_filter_suites() must return a virtual address
v3:
- add a comment to clarify why the start address is checked
v2:
- add include <linux/mm.h>
Fixes: 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()")
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The root_device_register() function does not return NULL, it returns
error pointers. Fix the check to match.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The kunit_device_register() function doesn't return NULL, it returns
error pointers. Change the KUNIT_ASSERT_NOT_NULL() to check for
ERR_OR_NULL().
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull strlcpy removal from Kees Cook:
"As promised, this is 'part 2' of the hardening tree, late in -rc1 now
that all the other trees with strlcpy() removals have landed. One new
user appeared (in bcachefs) but was a trivial refactor. The kernel is
now free of the strlcpy() API!
- Remove of the final (very recent) user of strlcpy() (in bcachefs)
- Remove the strlcpy() API. Long live strscpy()"
* tag 'strlcpy-removal-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string: Remove strlcpy()
bcachefs: Replace strlcpy() with strscpy()
|
|
With all the users of strlcpy() removed[1] from the kernel, remove the
API, self-tests, and other references. Leave mentions in Documentation
(about its deprecation), and in checkpatch.pl (to help migrate host-only
tools/ usage). Long live strscpy().
Link: https://github.com/KSPP/linux/issues/89 [1]
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The generic ipv6 checksums are only defined with CONFIG_NET=y, so gate
the test as well.
Fixes: 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401192143.jLdjbIy3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202401192357.WU4nPRdN-lkp@intel.com/
Reviewed-By: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240119145600.3093-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- tcp, fc, and rdma target fixes (Maurizio, Daniel, Hannes,
Christoph)
- discard fixes and improvements (Christoph)
- timeout debug improvements (Keith, Max)
- various cleanups (Daniel, Max, Giuxen)
- trace event string fixes (Arnd)
- shadow doorbell setup on reset fix (William)
- a write zeroes quirk for SK Hynix (Jim)
- MD pull request via Song:
- Sparse warning since v6.0 (Bart)
- /proc/mdstat regression since v6.7 (Yu Kuai)
- Use symbolic error value (Christian)
- IO Priority documentation update (Christian)
- Fix for accessing queue limits without having entered the queue
(Christoph, me)
- Fix for loop dio support (Christoph)
- Move null_blk off deprecated ida interface (Christophe)
- Ensure nbd initializes full msghdr (Eric)
- Fix for a regression with the folio conversion, which is now easier
to hit because of an unrelated change (Matthew)
- Remove redundant check in virtio-blk (Li)
- Fix for a potential hang in sbitmap (Ming)
- Fix for partial zone appending (Damien)
- Misc changes and fixes (Bart, me, Kemeng, Dmitry)
* tag 'for-6.8/block-2024-01-18' of git://git.kernel.dk/linux: (45 commits)
Documentation: block: ioprio: Update schedulers
loop: fix the the direct I/O support check when used on top of block devices
blk-mq: Remove the hctx 'run' debugfs attribute
nbd: always initialize struct msghdr completely
block: Fix iterating over an empty bio with bio_for_each_folio_all
block: bio-integrity: fix kcalloc() arguments order
virtio_blk: remove duplicate check if queue is broken in virtblk_done
sbitmap: remove stale comment in sbq_calc_wake_batch
block: Correct a documentation comment in blk-cgroup.c
null_blk: Remove usage of the deprecated ida_simple_xx() API
block: ensure we hold a queue reference when using queue limits
blk-mq: rename blk_mq_can_use_cached_rq
block: print symbolic error name instead of error code
blk-mq: fix IO hang from sbitmap wakeup race
nvmet-rdma: avoid circular locking dependency on install_queue()
nvmet-tcp: avoid circular locking dependency on install_queue()
nvme-pci: set doorbell config before unquiescing
block: fix partial zone append completion handling in req_bio_endio()
block/iocost: silence warning on 'last_period' potentially being unused
md/raid1: Use blk_opf_t for read and write operations
...
|
|
Pull CXL (Compute Express Link) updates from Dan Williams:
"The bulk of this update is support for enumerating the performance
capabilities of CXL memory targets and connecting that to a platform
CXL memory QoS class. Some follow-on work remains to hook up this data
into core-mm policy, but that is saved for v6.9.
The next significant update is unifying how CXL event records (things
like background scrub errors) are processed between so called
"firmware first" and native error record retrieval. The CXL driver
handler that processes the record retrieved from the device mailbox is
now the handler for that same record format coming from an EFI/ACPI
notification source.
This also contains miscellaneous feature updates, like Get Timestamp,
and other fixups.
Summary:
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups"
* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
cxl/core: use sysfs_emit() for attr's _show()
cxl/pci: Register for and process CPER events
PCI: Introduce cleanup helpers for device reference counts and locks
acpi/ghes: Process CXL Component Events
cxl/events: Create a CXL event union
cxl/events: Separate UUID from event structures
cxl/events: Remove passing a UUID to known event traces
cxl/events: Create common event UUID defines
cxl/events: Promote CXL event structures to a core header
cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
cxl: Fix device reference leak in cxl_port_perf_data_calculate()
cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
cxl: Introduce put_cxl_root() helper
cxl/port: Fix missing target list lock
cxl/port: Fix decoder initialization when nr_targets > interleave_ways
cxl/region: fix x9 interleave typo
cxl/trace: Pass UUID explicitly to event traces
cxl/region: use %pap format to print resource_size_t
cxl/region: Add dev_dbg() detail on failure to allocate HPA space
...
|
|
Nathan Chancellor <nathan@kernel.org> says:
This series disables DWARF5 for LLVM versions where it is known to be
broken due to linker relaxation.
* b4-shazam-merge:
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
Link: https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6
Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-0-aedf00a382ac@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Fangrui noted that the comment around CONFIG_AS_HAS_NON_CONST_LEB128
could be made more accurate because explicit .sleb128 directives are not
emitted, only .uleb128 directives are. Rename the symbol to
CONFIG_AS_HAS_NON_CONST_ULEB128 as a result.
Further clarifications include replacing "symbol deltas" with the more
accurate "label differences", noting that this issue has been resolved
in newer binutils (2.41+), and it only occurs when a port uses RISC-V
style linker relaxation.
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-3-aedf00a382ac@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
LLVM prior to 18.0.0 would generate incorrect debug info for DWARF5 due
to linker relaxation, which was worked around in clang by defaulting
RISC-V to DWARF4 [1]. Unfortunately, this workaround does not work for
the kernel because the DWARF version can be independently changed from
the default in Kconfig.
Do not allow DWARF5 to be selected for RISC-V when using linker
relaxation (ld.lld >= 15.0.0) and a version of LLVM that does not have
the fixes (the integrated assembler [2] and ld.lld [3] < 18.0.0)
necessary to generate the correct debug info.
Link: https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6 [1]
Link: https://github.com/llvm/llvm-project/commit/1df5ea29b43690b6622db2cad7b745607ca4de6a [2]
Link: https://github.com/llvm/llvm-project/commit/7ffabb61a5569444b5ac9322e22e5471cc5e4a77 [3]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-2-aedf00a382ac@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Supplement existing checksum tests with tests for csum_ipv6_magic and
ip_fast_csum.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-5-1c50de5f2167@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"For once not mostly MM-related.
17 hotfixes. 10 address post-6.7 issues and the other 7 are cc:stable"
* tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
userfaultfd: avoid huge_zero_page in UFFDIO_MOVE
MAINTAINERS: add entry for shrinker
selftests: mm: hugepage-vmemmap fails on 64K page size systems
mm/memory_hotplug: fix memmap_on_memory sysfs value retrieval
mailmap: switch email for Tanzir Hasan
mailmap: add old address mappings for Randy
kernel/crash_core.c: make __crash_hotplug_lock static
efi: disable mirror feature during crashkernel
kexec: do syscore_shutdown() in kernel_kexec
mailmap: update entry for Manivannan Sadhasivam
fs/proc/task_mmu: move mmu notification mechanism inside mm lock
mm: zswap: switch maintainers to recently active developers and reviewers
scripts/decode_stacktrace.sh: optionally use LLVM utilities
kasan: avoid resetting aux_lock
lib/Kconfig.debug: disable CONFIG_DEBUG_INFO_BTF for Hexagon
MAINTAINERS: update LTP maintainers
kdump: defer the insertion of crashkernel resources
|
|
After commit 106397376c036 ("sbitmap: fix batching wakeup"), we may wake
up more than one queue for each batch. Just remove stale comment that
we wake up only one queue for each batch.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20240115145626.665562-1-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
pahole, which generates BTF, relies on elfutils to process DWARF debug
info. Because kernel modules are relocatable files, elfutils needs to
resolve relocations when processing the DWARF .debug sections.
Hexagon is not supported in binutils or elfutils, so elfutils is unable to
process relocations in kernel modules, causing pahole to crash during BTF
generation.
Do not allow CONFIG_DEBUG_INFO_BTF to be selected for Hexagon until it is
supported in elfutils, so that there are no more cryptic build failures
during BTF generation.
Link: https://lkml.kernel.org/r/20240105-hexagon-disable-btf-v1-1-ddab073e7f74@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312192107.wMIKiZWw-lkp@intel.com/
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Brian Cain <bcain@quicinc.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Add machine variable capacity information to /proc/sysinfo.
- Limit the waste of page tables and always align vmalloc area size and
base address on segment boundary.
- Fix a memory leak when an attempt to register interruption sub class
(ISC) for the adjunct-processor (AP) guest failed.
- Reset response code AP_RESPONSE_INVALID_GISA to understandable by
guest AP_RESPONSE_INVALID_ADDRESS in response to a failed
interruption sub class (ISC) registration attempt.
- Improve reaction to adjunct-processor (AP)
AP_RESPONSE_OTHERWISE_CHANGED response code when enabling interrupts
on behalf of a guest.
- Fix incorrect sysfs 'status' attribute of adjunct-processor (AP)
queue device bound to the vfio_ap device driver when the mediated
device is attached to a guest, but the queue device is not passed
through.
- Rework struct ap_card to hold the whole adjunct-processor (AP) card
hardware information. As result, all the ugly bit checks are replaced
by simple evaluations of the required bit fields.
- Improve handling of some weird scenarios between service element (SE)
host and SE guest with adjunct-processor (AP) pass-through support.
- Change local_ctl_set_bit() and local_ctl_clear_bit() so they return
the previous value of the to be changed control register. This is
useful if a bit is only changed temporarily and the previous content
needs to be restored.
- The kernel starts with machine checks disabled and is expected to
enable it once trap_init() is called. However the implementation
allows machine checks early. Consistently enable it in trap_init()
only.
- local_mcck_disable() and local_mcck_enable() assume that machine
checks are always enabled. Instead implement and use
local_mcck_save() and local_mcck_restore() to disable machine checks
and restore the previous state.
- Modification of floating point control (FPC) register of a traced
process using ptrace interface may lead to corruption of the FPC
register of the tracing process. Fix this.
- kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point
control (FPC) register in vCPU, but may lead to corruption of the FPC
register of the host process. Fix this.
- Use READ_ONCE() to read a vCPU floating point register value from the
memory mapped area. This avoids that, depending on code generation, a
different value is tested for validity than the one that is used.
- Get rid of test_fp_ctl(), since it is quite subtle to use it
correctly. Instead copy a new floating point control register value
into its save area and test the validity of the new value when
loading it.
- Remove superfluous save_fpu_regs() call.
- Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines
provide the vector facility since many years and the need to make the
task structure size dependent on the vector facility does not exist.
- Remove the "novx" kernel command line option, as the vector code runs
without any problems since many years.
- Add the vector facility to the z13 architecture level set (ALS). All
hypervisors support the vector facility since many years. This allows
compile time optimizations of the kernel.
- Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As
result, the compiled code will have less runtime checks and less
code.
- Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C.
- Convert the struct subchannel spinlock from pointer to member.
* tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
Revert "s390: update defconfigs"
s390/cio: make sch->lock spinlock pointer a member
s390: update defconfigs
s390/mm: convert pgste locking functions to C
s390/fpu: get rid of MACHINE_HAS_VX
s390/als: add vector facility to z13 architecture level set
s390/fpu: remove "novx" option
s390/fpu: remove ARCH_WANTS_DYNAMIC_TASK_STRUCT support
KVM: s390: remove superfluous save_fpu_regs() call
s390/fpu: get rid of test_fp_ctl()
KVM: s390: use READ_ONCE() to read fpc register value
KVM: s390: fix setting of fpc register
s390/ptrace: handle setting of fpc register correctly
s390/nmi: implement and use local_mcck_save() / local_mcck_restore()
s390/nmi: consistently enable machine checks in trap_init()
s390/ctlreg: return old register contents when changing bits
s390/ap: handle outband SE bind state change
s390/ap: store TAPQ hwinfo in struct ap_card
s390/vfio-ap: fix sysfs status attribute for AP queue devices
s390/vfio-ap: improve reaction to response code 07 from PQAP(AQIC) command
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work.
In the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to
remove the sentinel. For v6.8-rc1 we get a few more updates for fs/
directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as
those patches are still being reviewed. After that we then can expect
also the removal of the no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to
see further work by Thomas Weißschuh with the constificatin of the
struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have
suggested for him to become a maintainer and he's accepted. So for
v6.9-rc1 I look forward to seeing him sent you a pull request for
further sysctl changes. This also removes Iurii Zaikin as a maintainer
as he has moved on to other projects and has had no time to help at
all"
* tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove struct ctl_path
sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR
coda: Remove the now superfluous sentinel elements from ctl_table array
sysctl: Remove the now superfluous sentinel elements from ctl_table array
fs: Remove the now superfluous sentinel elements from ctl_table array
cachefiles: Remove the now superfluous sentinel element from ctl_table array
sysclt: Clarify the results of selftest run
sysctl: Add a selftest for handling empty dirs
sysctl: Fix out of bounds access for empty sysctl registers
MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl
MAINTAINERS: remove Iurii Zaikin from proc sysctl
|
|
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add incremental lskcipher/skcipher processing
Algorithms:
- Remove SHA1 from drbg
- Remove CFB and OFB
Drivers:
- Add comp high perf mode configuration in hisilicon/zip
- Add support for 420xx devices in qat
- Add IAA Compression Accelerator driver"
* tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits)
crypto: iaa - Account for cpu-less numa nodes
crypto: scomp - fix req->dst buffer overflow
crypto: sahara - add support for crypto_engine
crypto: sahara - remove error message for bad aes request size
crypto: sahara - remove unnecessary NULL assignments
crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct
crypto: sahara - use dev_err_probe()
crypto: sahara - use devm_clk_get_enabled()
crypto: sahara - use BIT() macro
crypto: sahara - clean up macro indentation
crypto: sahara - do not resize req->src when doing hash operations
crypto: sahara - fix processing hash requests with req->nbytes < sg->length
crypto: sahara - improve error handling in sahara_sha_process()
crypto: sahara - fix wait_for_completion_timeout() error handling
crypto: sahara - fix ahash reqsize
crypto: sahara - handle zero-length aes requests
crypto: skcipher - remove excess kerneldoc members
crypto: shash - remove excess kerneldoc members
crypto: qat - generate dynamically arbiter mappings
crypto: qat - add support for ring pair level telemetry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- a new feature that adds APIs for managing devices introducing a set
of helper functions which allow devices (internally a struct
kunit_device) to be created and managed by KUnit.
These devices will be automatically unregistered on test exit. These
helpers can either use a user-provided struct device_driver, or have
one automatically created and managed by KUnit. In both cases, the
device lives on a new kunit_bus.
- changes to switch drm/tests to use kunit devices
- several fixes and enhancements to attribute feature
- changes to reorganize deferred action function introducing
KUNIT_DEFINE_ACTION_WRAPPER
- new feature adds ability to run tests after boot using debugfs
- fixes and enhancements to string-stream-test:
- parse ERR_PTR in string_stream_destroy()
- unchecked dereference in bug fix in debugfs_print_results()
- handling errors from alloc_string_stream()
- NULL-dereference bug fix in kunit_init_suite()
* tag 'linux_kselftest-kunit-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (27 commits)
kunit: Fix some comments which were mistakenly kerneldoc
kunit: Protect string comparisons against NULL
kunit: Add example of kunit_activate_static_stub() with pointer-to-function
kunit: Allow passing function pointer to kunit_activate_static_stub()
kunit: Fix NULL-dereference in kunit_init_suite() if suite->log is NULL
kunit: Reset test->priv after each param iteration
kunit: Add example for using test->priv
drm/tests: Switch to kunit devices
ASoC: topology: Replace fake root_device with kunit_device in tests
overflow: Replace fake root_device with kunit_device
fortify: test: Use kunit_device
kunit: Add APIs for managing devices
Documentation: Add debugfs docs with run after boot
kunit: add ability to run tests after boot using debugfs
kunit: add is_init test attribute
kunit: add example suite to test init suites
kunit: add KUNIT_INIT_TABLE to init linker section
kunit: move KUNIT_TABLE out of INIT_DATA
kunit: tool: add test for parsing attributes
kunit: tool: fix parsing of test attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new features standpoint, the most significant change here is
the addition of CSI-2 and MIPI DisCo for Imaging support to the ACPI
device enumeration code that will allow MIPI cameras to be enumerated
through the platform firmware on systems using ACPI.
Also significant is the switch-over to threaded interrupt handlers for
the ACPI SCI and the dedicated EC interrupt (on systems where the
former is not used) which essentially allows all ACPI code to run with
local interrupts enabled. That should improve responsiveness
significantly on systems where multiple GPEs are enabled and the
handling of one SCI involves many I/O address space accesses which
previously had to be carried out in one go with disabled interrupts on
the local CPU.
Apart from the above, the ACPI thermal zone driver will use the
Thermal fast Sampling Period (_TFP) object if available, which should
allow temperature changes to be followed more accurately on some
systems, the ACPI Notify () handlers can run on all CPUs (not just on
CPU0), which should generally speed up the processing of events
signaled through the ACPI SCI, and the ACPI power button driver will
trigger wakeup key events via the input subsystem (on systems where it
is a system wakeup device)
In addition to that, there are the usual bunch of fixes and cleanups.
Specifics:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki)
- Adjust the cpufreq thermal reduction algorithm in the ACPI
processor driver for Tegra241 (Srikar Srimath Tirumala, Arnd
Bergmann)
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki)
- Switch over ACPI to using a threaded interrupt handler for the SCI
(Rafael J. Wysocki)
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki)
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki)
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock
to keep local interrupts on (Rafael J. Wysocki)
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg)
- Correct and clean up the generic function for parsing ACPI
data-only tables with array structure (Yuntao Wang)
- Modify acpi_dev_uid_match() to support different types of its
second argument and adjust its users accordingly (Raag Jadav)
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki)
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann)
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen)
- Modify the ACPI LPIT table handling code to avoid u32
multiplication overflows in state residency computations (Nikita
Kiryushin)
- Drop an unused helper function from the ACPI backlight (video)
driver and add a clarifying comment to it (Hans de Goede)
- Update the ACPI backlight driver to avoid using uninitialized
memory in some cases (Nikita Kiryushin)
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu)
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik)
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous
memory failure events, so they are handled differently from the
asynchronous ones (Shuai Xue)
- Fix NULL pointer dereference check in the ACPI extlog driver
(Prarit Bhargava)
- Adjust the ACPI extlog driver to clear the Extended Error Log
status when RAS_CEC handled the error (Tony Luck)
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede)
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is
not the same as one of the real pxm values (Yuntao Wang)
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko)
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap)
- Make the ACPI button driver send wakeup key events to user space in
addition to power button events on systems that can be woken up by
the power button (Ken Xue)
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov)"
* tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
ACPI: button: trigger wakeup key events
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
ACPI: LPSS: Fix the fractional clock divider flags
ACPI: NUMA: Fix the logic of getting the fake_pxm value
ACPI: NUMA: Optimize the check for the availability of node values
ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity()
ACPI: watchdog: fix kernel-doc warnings
ACPI: extlog: fix NULL pointer dereference check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)
Freezing is an operation involving double_cmpxchg() that makes a slab
exclusive for a particular CPU. Chengming noticed that we use it also
in situations where we are not yet installing the slab as the CPU
slab, because freezing also indicates that the slab is not on the
shared list. This results in redundant freeze/unfreeze operation and
can be avoided by marking separately the shared list presence by
reusing the PG_workingset flag.
This approach neatly avoids the issues described in 9b1ea29bc0d7
("Revert "mm, slub: consider rest of partial list if acquire_slab()
fails"") as we can now grab a slab from the shared list in a quick
and guaranteed way without the cmpxchg_double() operation that
amplifies the lock contention and can fail.
As a result, lkp has reported 34.2% improvement of
stress-ng.rawudp.ops_per_sec
- SLAB removal and SLUB cleanups (Vlastimil Babka)
The SLAB allocator has been deprecated since 6.5 and nobody has
objected so far. We agreed at LSF/MM to wait until the next LTS,
which is 6.6, so we should be good to go now.
This doesn't yet erase all traces of SLAB outside of mm/ so some dead
code, comments or documentation remain, and will be cleaned up
gradually (some series are already in the works).
Removing the choice of allocators has already allowed to simplify and
optimize the code wiring up the kmalloc APIs to the SLUB
implementation.
* tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm/slub: free KFENCE objects in slab_free_hook()
mm/slub: handle bulk and single object freeing separately
mm/slub: introduce __kmem_cache_free_bulk() without free hooks
mm/slub: fix bulk alloc and free stats
mm/slub: optimize free fast path code layout
mm/slub: optimize alloc fastpath code layout
mm/slub: remove slab_alloc() and __kmem_cache_alloc_lru() wrappers
mm/slab: move kmalloc() functions from slab_common.c to slub.c
mm/slab: move kmalloc_slab() to mm/slab.h
mm/slab: move kfree() from slab_common.c to slub.c
mm/slab: move struct kmem_cache_node from slab.h to slub.c
mm/slab: move memcg related functions from slab.h to slub.c
mm/slab: move pre/post-alloc hooks from slab.h to slub.c
mm/slab: consolidate includes in the internal mm/slab.h
mm/slab: move the rest of slub_def.h to mm/slab.h
mm/slab: move struct kmem_cache_cpu declaration to slub.c
mm/slab: remove mm/slab.c and slab_def.h
mm/mempool/dmapool: remove CONFIG_DEBUG_SLAB ifdefs
mm/slab: remove CONFIG_SLAB code from slab common code
cpu/hotplug: remove CPUHP_SLAB_PREPARE hooks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobject update from Ingo Molnar:
- Make tracking object use more robust: it's not safe to access a
tracking object after releasing the hashbucket lock. Create a
persistent copy for debug printouts instead.
* tag 'core-debugobjects-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Stop accessing objects after releasing hash bucket lock
|
|
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.
NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.
[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iov_iter cleanups from Christian Brauner:
"This contains a minor cleanup. The patches drop an unused argument
from import_single_range() allowing to replace import_single_range()
with import_ubuf() and dropping import_single_range() completely"
* tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: replace import_single_range() with import_ubuf()
iov_iter: remove unused 'iov' argument from import_single_range()
|
|
Pick up some miscellaneous fixups for v6.8.
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge low-level ACPICA interface changes, an _SB-scope _OSC handshake
update and a data-only ACPI tables parsing code update for 6.8-rc1:
- Switch over ACPI to using a threaded interrupt handler for the
SCI (Rafael J. Wysocki).
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki).
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki).
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock to
keep local interrupts on (Rafael J. Wysocki).
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg).
- Correct and clean up the generic function for parsing ACPI data-only
tables with array structure (Yuntao Wang).
* acpi-osl:
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: OSL: Allow Notify () handlers to run on all CPUs
ACPI: OSL: Rearrange workqueue selection in acpi_os_execute()
ACPI: OSL: Rework error handling in acpi_os_execute()
ACPI: OSL: Use a threaded interrupt handler for SCI
* acpi-bus:
ACPI: Run USB4 _OSC() first with query bit set
* acpi-tables:
ACPI: tables: Correct and clean up the logic of acpi_parse_entries_array()
|
|
The KUnit device helpers are documented with kerneldoc in their header
file, but also have short comments over their implementation. These were
mistakenly formatted as kerneldoc comments, even though they're not
valid kerneldoc. It shouldn't cause any serious problems -- this file
isn't included in the docs -- but it could be confusing, and causes
warnings.
Remove the extra '*' so that these aren't treated as kerneldoc.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312181920.H4EPAH20-lkp@intel.com/
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Adds a variant of example_static_stub_test() that shows use of a
pointer-to-function with kunit_activate_static_stub().
A const pointer to the add_one() function is declared. This
pointer-to-function is passed to kunit_activate_static_stub() and
kunit_deactivate_static_stub() instead of passing add_one directly.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
suite->log must be checked for NULL before passing it to
string_stream_clear(). This was done in kunit_init_test() but was missing
from kunit_init_suite().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 6d696c4695c5 ("kunit: add ability to run tests after boot using debugfs")
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: David Gow <davidgow@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
