| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge misc fixes from Andrew Morton:
"21 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, and mm
(mlock, pagecache, damon, slub, memcg, hugetlb, and pagecache)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
mm: bdi: initialize bdi_min_ratio when bdi is unregistered
hugetlbfs: fix issue of preallocation of gigantic pages can't work
mm/memcg: relocate mod_objcg_mlstate(), get_obj_stock() and put_obj_stock()
mm/slub: fix endianness bug for alloc/free_traces attributes
selftests/damon: split test cases
selftests/damon: test debugfs file reads/writes with huge count
selftests/damon: test wrong DAMOS condition ranges input
selftests/damon: test DAMON enabling with empty target_ids case
selftests/damon: skip test if DAMON is running
mm/damon/vaddr-test: remove unnecessary variables
mm/damon/vaddr-test: split a test function having >1024 bytes frame size
mm/damon/vaddr: remove an unnecessary warning message
mm/damon/core: remove unnecessary error messages
mm/damon/dbgfs: remove an unnecessary error message
mm/damon/core: use better timer mechanisms selection threshold
mm/damon/core: fix fake load reports due to uninterruptible sleeps
timers: implement usleep_idle_range()
filemap: remove PageHWPoison check from next_uptodate_page()
mailmap: update email address for Guo Ren
MAINTAINERS: update kdump maintainers
...
|
|
Patch series "mm/damon: Fix fake /proc/loadavg reports", v3.
This patchset fixes DAMON's fake load report issue. The first patch
makes yet another variant of usleep_range() for this fix, and the second
patch fixes the issue of DAMON by making it using the newly introduced
function.
This patch (of 2):
Some kernel threads such as DAMON could need to repeatedly sleep in
micro seconds level. Because usleep_range() sleeps in uninterruptible
state, however, such threads would make /proc/loadavg reports fake load.
To help such cases, this commit implements a variant of usleep_range()
called usleep_idle_range(). It is same to usleep_range() but sets the
state of the current task as TASK_IDLE while sleeping.
Link: https://lkml.kernel.org/r/20211126145015.15862-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211126145015.15862-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Tracing, ftrace and tracefs fixes:
- Have tracefs honor the gid mount option
- Have new files in tracefs inherit the parent ownership
- Have direct_ops unregister when it has no more functions
- Properly clean up the ops when unregistering multi direct ops
- Add a sample module to test the multiple direct ops
- Fix memory leak in error path of __create_synth_event()"
* tag 'trace-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix possible memory leak in __create_synth_event() error path
ftrace/samples: Add module to test multi direct modify interface
ftrace: Add cleanup to unregister_ftrace_direct_multi
ftrace: Use direct_ops hash in unregister_ftrace_direct
tracefs: Set all files to the same group ownership as the mount option
tracefs: Have new files inherit the ownership of their parent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull aio poll fixes from Eric Biggers:
"Fix three bugs in aio poll, and one issue with POLLFREE more broadly:
- aio poll didn't handle POLLFREE, causing a use-after-free.
- aio poll could block while the file is ready.
- aio poll called eventfd_signal() when it isn't allowed.
- POLLFREE didn't handle multiple exclusive waiters correctly.
This has been tested with the libaio test suite, as well as with test
programs I wrote that reproduce the first two bugs. I am sending this
pull request myself as no one seems to be maintaining this code"
* tag 'aio-poll-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
aio: Fix incorrect usage of eventfd_signal_allowed()
aio: fix use-after-free due to missing POLLFREE handling
aio: keep poll requests on waitqueue until completed
signalfd: use wake_up_pollfree()
binder: use wake_up_pollfree()
wait: add wake_up_pollfree()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- bpf, sockmap: re-evaluate proto ops when psock is removed from
sockmap
Current release - new code bugs:
- bpf: fix bpf_check_mod_kfunc_call for built-in modules
- ice: fixes for TC classifier offloads
- vrf: don't run conntrack on vrf with !dflt qdisc
Previous releases - regressions:
- bpf: fix the off-by-two error in range markings
- seg6: fix the iif in the IPv6 socket control block
- devlink: fix netns refcount leak in devlink_nl_cmd_reload()
- dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
- dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
Previous releases - always broken:
- ethtool: do not perform operations on net devices being
unregistered
- udp: use datalen to cap max gso segments
- ice: fix races in stats collection
- fec: only clear interrupt of handling queue in fec_enet_rx_queue()
- m_can: pci: fix incorrect reference clock rate
- m_can: disable and ignore ELO interrupt
- mvpp2: fix XDP rx queues registering
Misc:
- treewide: add missing includes masked by cgroup -> bpf.h
dependency"
* tag 'net-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
net: dsa: mv88e6xxx: allow use of PHYs on CPU and DSA ports
net: wwan: iosm: fixes unable to send AT command during mbim tx
net: wwan: iosm: fixes net interface nonfunctional after fw flash
net: wwan: iosm: fixes unnecessary doorbell send
net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering
MAINTAINERS: s390/net: remove myself as maintainer
net/sched: fq_pie: prevent dismantle issue
net: mana: Fix memory leak in mana_hwc_create_wq
seg6: fix the iif in the IPv6 socket control block
nfp: Fix memory leak in nfp_cpp_area_cache_add()
nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done
nfc: fix segfault in nfc_genl_dump_devices_done
udp: using datalen to cap max gso segments
net: dsa: mv88e6xxx: error handling for serdes_power functions
can: kvaser_usb: get CAN clock frequency from device
can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter
net: mvpp2: fix XDP rx queues registering
vmxnet3: fix minimum vectors alloc issue
net, neigh: clear whole pneigh_entry at alloc time
net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
...
|
|
Several ->poll() implementations are special in that they use a
waitqueue whose lifetime is the current task, rather than the struct
file as is normally the case. This is okay for blocking polls, since a
blocking poll occurs within one task; however, non-blocking polls
require another solution. This solution is for the queue to be cleared
before it is freed, using 'wake_up_poll(wq, EPOLLHUP | POLLFREE);'.
However, that has a bug: wake_up_poll() calls __wake_up() with
nr_exclusive=1. Therefore, if there are multiple "exclusive" waiters,
and the wakeup function for the first one returns a positive value, only
that one will be called. That's *not* what's needed for POLLFREE;
POLLFREE is special in that it really needs to wake up everyone.
Considering the three non-blocking poll systems:
- io_uring poll doesn't handle POLLFREE at all, so it is broken anyway.
- aio poll is unaffected, since it doesn't support exclusive waits.
However, that's fragile, as someone could add this feature later.
- epoll doesn't appear to be broken by this, since its wakeup function
returns 0 when it sees POLLFREE. But this is fragile.
Although there is a workaround (see epoll), it's better to define a
function which always sends POLLFREE to all waiters. Add such a
function. Also make it verify that the queue really becomes empty after
all waiters have been woken up.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211209010455.42744-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
There's error paths in __create_synth_event() after the argv is allocated
that fail to free it. Add a jump to free it when necessary.
Link: https://lkml.kernel.org/r/20211209024317.11783-1-linmq006@gmail.com
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
[ Fixed up the patch and change log ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Daniel Borkmann says:
====================
bpf 2021-12-08
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 29 files changed, 659 insertions(+), 80 deletions(-).
The main changes are:
1) Fix an off-by-two error in packet range markings and also add a batch of
new tests for coverage of these corner cases, from Maxim Mikityanskiy.
2) Fix a compilation issue on MIPS JIT for R10000 CPUs, from Johan Almbladh.
3) Fix two functional regressions and a build warning related to BTF kfunc
for modules, from Kumar Kartikeya Dwivedi.
4) Fix outdated code and docs regarding BPF's migrate_disable() use on non-
PREEMPT_RT kernels, from Sebastian Andrzej Siewior.
5) Add missing includes in order to be able to detangle cgroup vs bpf header
dependencies, from Jakub Kicinski.
6) Fix regression in BPF sockmap tests caused by missing detachment of progs
from sockets when they are removed from the map, from John Fastabend.
7) Fix a missing "no previous prototype" warning in x86 JIT caused by BPF
dispatcher, from Björn Töpel.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add selftests to cover packet access corner cases
bpf: Fix the off-by-two error in range markings
treewide: Add missing includes masked by cgroup -> bpf dependency
tools/resolve_btfids: Skip unresolved symbol warning for empty BTF sets
bpf: Fix bpf_check_mod_kfunc_call for built-in modules
bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALL
mips, bpf: Fix reference to non-existing Kconfig symbol
bpf: Make sure bpf_disable_instrumentation() is safe vs preemption.
Documentation/locking/locktypes: Update migrate_disable() bits.
bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap
bpf, sockmap: Attach map progs to psock early for feature probes
bpf, x86: Fix "no previous prototype" warning
====================
Link: https://lore.kernel.org/r/20211208155125.11826-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding ops cleanup to unregister_ftrace_direct_multi,
so it can be reused in another register call.
Link: https://lkml.kernel.org/r/20211206182032.87248-3-jolsa@kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Fixes: f64dd4627ec6 ("ftrace: Add multi direct register/unregister interface")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Now when we have *direct_multi interface the direct_functions
hash is no longer owned just by direct_ops. It's also used by
any other ftrace_ops passed to *direct_multi interface.
Thus to find out that we are unregistering the last function
from direct_ops, we need to check directly direct_ops's hash.
Link: https://lkml.kernel.org/r/20211206182032.87248-2-jolsa@kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Fixes: f64dd4627ec6 ("ftrace: Add multi direct register/unregister interface")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Prevent a tick storm when a dedicated timekeeper CPU in nohz_full
mode runs for prolonged periods with interrupts disabled and ends up
programming the next tick in the past, leading to that storm
* tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/nohz: Last resort update jiffies on nohz_full IRQ entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Properly init uclamp_flags of a runqueue, on first enqueuing
- Fix preempt= callback return values
- Correct utime/stime resource usage reporting on nohz_full to return
the proper times instead of shorter ones
* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
preempt/dynamic: Fix setup_preempt_mode() return value
sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
|
|
Commit d81ae8aac85c ("sched/uclamp: Fix initialization of struct
uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to
match the woken up task's uclamp_max when the rq is idle.
The code was relying on rq->uclamp_max initialized to zero, so on first
enqueue
static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p,
enum uclamp_id clamp_id)
{
...
if (uc_se->value > READ_ONCE(uc_rq->value))
WRITE_ONCE(uc_rq->value, uc_se->value);
}
was actually resetting it. But since commit d81ae8aac85c changed the
default to 1024, this no longer works. And since rq->uclamp_flags is
also initialized to 0, neither above code path nor uclamp_idle_reset()
update the rq->uclamp_max on first wake up from idle.
This is only visible from first wake up(s) until the first dequeue to
idle after enabling the static key. And it only matters if the
uclamp_max of this task is < 1024 since only then its uclamp_max will be
effectively ignored.
Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to
ensure uclamp_idle_reset() is called which then will update the rq
uclamp_max value as expected.
Fixes: d81ae8aac85c ("sched/uclamp: Fix initialization of struct uclamp_rq")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
|
|
__setup() callbacks expect 1 for success and 0 for failure. Correct the
usage here to reflect that.
Fixes: 826bfeb37bb4 ("preempt/dynamic: Support dynamic preempt with preempt= boot option")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com
|
|
The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):
// 1. Passes the verifier:
if (data + 8 > data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
// 2. Rejected by the verifier (should still pass):
if (data + 7 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:
// 3. Rejected by the verifier, but the check is stricter than in #1.
if (data + 8 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.
This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.
Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
|
|
When module registering its set is built-in, THIS_MODULE will be NULL,
hence we cannot return early in case owner is NULL.
Fixes: 14f267d95fe4 ("bpf: btf: Introduce helpers for dynamic BTF set registration")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122144742.477787-3-memxor@gmail.com
|
|
Vinicius Costa Gomes reported [0] that build fails when
CONFIG_DEBUG_INFO_BTF is enabled and CONFIG_BPF_SYSCALL is disabled.
This leads to btf.c not being compiled, and then no symbol being present
in vmlinux for the declarations in btf.h. Since BTF is not useful
without enabling BPF subsystem, disallow this combination.
However, theoretically disabling both now could still fail, as the
symbol for kfunc_btf_id_list variables is not available. This isn't a
problem as the compiler usually optimizes the whole register/unregister
call, but at lower optimization levels it can fail the build in linking
stage.
Fix that by adding dummy variables so that modules taking address of
them still work, but the whole thing is a noop.
[0]: https://lore.kernel.org/bpf/20211110205418.332403-1-vinicius.gomes@intel.com
Fixes: 14f267d95fe4 ("bpf: btf: Introduce helpers for dynamic BTF set registration")
Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122144742.477787-2-memxor@gmail.com
|
|
getrusage(RUSAGE_THREAD) with nohz_full may return shorter utime/stime
than the actual time.
task_cputime_adjusted() snapshots utime and stime and then adjust their
sum to match the scheduler maintained cputime.sum_exec_runtime.
Unfortunately in nohz_full, sum_exec_runtime is only updated once per
second in the worst case, causing a discrepancy against utime and stime
that can be updated anytime by the reader using vtime.
To fix this situation, perform an update of cputime.sum_exec_runtime
when the cputime snapshot reports the task as actually running while
the tick is disabled. The related overhead is then contained within the
relevant situations.
Reported-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20211026141055.57358-3-frederic@kernel.org
|
|
When at least one CPU runs in nohz_full mode, a dedicated timekeeper CPU
is guaranteed to stay online and to never stop its tick.
Meanwhile on some rare case, the dedicated timekeeper may be running
with interrupts disabled for a while, such as in stop_machine.
If jiffies stop being updated, a nohz_full CPU may end up endlessly
programming the next tick in the past, taking the last jiffies update
monotonic timestamp as a stale base, resulting in an tick storm.
Here is a scenario where it matters:
0) CPU 0 is the timekeeper and CPU 1 a nohz_full CPU.
1) A stop machine callback is queued to execute somewhere.
2) CPU 0 reaches MULTI_STOP_DISABLE_IRQ while CPU 1 is still in
MULTI_STOP_PREPARE. Hence CPU 0 can't do its timekeeping duty. CPU 1
can still take IRQs.
3) CPU 1 receives an IRQ which queues a timer callback one jiffy forward.
4) On IRQ exit, CPU 1 schedules the tick one jiffy forward, taking
last_jiffies_update as a base. But last_jiffies_update hasn't been
updated for 2 jiffies since the timekeeper has interrupts disabled.
5) clockevents_program_event(), which relies on ktime_get(), observes
that the expiration is in the past and therefore programs the min
delta event on the clock.
6) The tick fires immediately, goto 3)
7) Tick storm, the nohz_full CPU is drown and takes ages to reach
MULTI_STOP_DISABLE_IRQ, which is the only way out of this situation.
Solve this with unconditionally updating jiffies if the value is stale
on nohz_full IRQ entry. IRQs and other disturbances are expected to be
rare enough on nohz_full for the unconditional call to ktime_get() to
actually matter.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20211026141055.57358-2-frederic@kernel.org
|
|
The 'kprobe::data_size' is unsigned, thus it can not be negative. But if
user sets it enough big number (e.g. (size_t)-8), the result of 'data_size
+ sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct
kretprobe_instance) or zero. In result, the kretprobe_instance are
allocated without enough memory, and kretprobe accesses outside of
allocated memory.
To avoid this issue, introduce a max limitation of the
kretprobe::data_size. 4KB per instance should be OK.
Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: f47cd9b553aa ("kprobes: kretprobe user entry-handler")
Reported-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Doing the command:
echo 'hist:key=common_pid.execname,common_timestamp' > /sys/kernel/debug/tracing/events/xxx/trigger
Triggers many kmemleak reports:
unreferenced object 0xffff0000c7ea4980 (size 128):
comm "bash", pid 338, jiffies 4294912626 (age 9339.324s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0
[<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178
[<00000000633bd154>] tracing_map_init+0x1f8/0x268
[<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0
[<00000000bf8520ed>] trigger_process_regex+0xd4/0x128
[<00000000f549355a>] event_trigger_write+0x7c/0x120
[<00000000b80f898d>] vfs_write+0xc4/0x380
[<00000000823e1055>] ksys_write+0x74/0xf8
[<000000008a9374aa>] __arm64_sys_write+0x24/0x30
[<0000000087124017>] do_el0_svc+0x88/0x1c0
[<00000000efd0dcd1>] el0_svc+0x1c/0x28
[<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0
[<00000000e7399680>] el0_sync+0x148/0x180
unreferenced object 0xffff0000c7ea4980 (size 128):
comm "bash", pid 338, jiffies 4294912626 (age 9339.324s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0
[<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178
[<00000000633bd154>] tracing_map_init+0x1f8/0x268
[<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0
[<00000000bf8520ed>] trigger_process_regex+0xd4/0x128
[<00000000f549355a>] event_trigger_write+0x7c/0x120
[<00000000b80f898d>] vfs_write+0xc4/0x380
[<00000000823e1055>] ksys_write+0x74/0xf8
[<000000008a9374aa>] __arm64_sys_write+0x24/0x30
[<0000000087124017>] do_el0_svc+0x88/0x1c0
[<00000000efd0dcd1>] el0_svc+0x1c/0x28
[<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0
[<00000000e7399680>] el0_sync+0x148/0x180
The reason is elts->pages[i] is alloced by get_zeroed_page.
and kmemleak will not scan the area alloced by get_zeroed_page.
The address stored in elts->pages will be regarded as leaked.
That is, the elts->pages[i] will have pointers loaded onto it as well, and
without telling kmemleak about it, those pointers will look like memory
without a reference.
To fix this, call kmemleak_alloc to tell kmemleak to scan elts->pages[i]
Link: https://lkml.kernel.org/r/20211124140801.87121-1-chenjun102@huawei.com
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When comparing two strings for the "onmatch" histogram trigger, fields
that are strings use string comparisons, which do not care about being
signed or not.
Do not fail to match two string fields if one is unsigned char array and
the other is a signed char array.
Link: https://lore.kernel.org/all/20211129123043.5cfd687a@gandalf.local.home/
Cc: stable@vgerk.kernel.org
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Fixes: b05e89ae7cf3b ("tracing: Accept different type for synthetic event fields")
Reviewed-by: Masami Hiramatsu <mhiramatsu@kernel.org>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix to ensure that there is no stale KASAN shadow
state left on the idle task's stack when a CPU is brought up after it
was brought down before"
* tag 'sched-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/scs: Reset task stack state in bringup_cpu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single fix for perf to prevent it from sending SIGTRAP to another
task from a trace point event as it's not possible to deliver a
synchronous signal to a different task from there"
* tag 'perf-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Ignore sigtrap for tracepoints destined for other tasks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two regression fixes for reader writer semaphores:
- Plug a race in the lock handoff which is caused by inconsistency of
the reader and writer path and can lead to corruption of the
underlying counter.
- down_read_trylock() is suboptimal when the lock is contended and
multiple readers trylock concurrently. That's due to the initial
value being read non-atomically which results in at least two
compare exchange loops. Making the initial readout atomic reduces
this significantly. Whith 40 readers by 11% in a benchmark which
enforces contention on mmap_sem"
* tag 'locking-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Optimize down_read_trylock() under highly contended case
locking/rwsem: Make handoff bit handling more consistent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull another tracing fix from Steven Rostedt:
"Fix the fix of pid filtering
The setting of the pid filtering flag tested the "trace only this pid"
case twice, and ignored the "trace everything but this pid" case.
The 5.15 kernel does things a little differently due to the new sparse
pid mask introduced in 5.16, and as the bug was discovered running the
5.15 kernel, and the first fix was initially done for that kernel,
that fix handled both cases (only pid and all but pid), but the
forward port to 5.16 created this bug"
* tag 'trace-v5.16-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Test the 'Do not trace this pid' case in create event
|
|
When creating a new event (via a module, kprobe, eprobe, etc), the
descriptors that are created must add flags for pid filtering if an
instance has pid filtering enabled, as the flags are used at the time the
event is executed to know if pid filtering should be done or not.
The "Only trace this pid" case was added, but a cut and paste error made
that case checked twice, instead of checking the "Trace all but this pid"
case.
Link: https://lore.kernel.org/all/202111280401.qC0z99JB-lkp@intel.com/
Fixes: 6cb206508b62 ("tracing: Check pid filtering when creating events")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two fixes to event pid filtering:
- Make sure newly created events reflect the current state of pid
filtering
- Take pid filtering into account when recording trigger events.
(Also clean up the if statement to be cleaner)"
* tag 'trace-v5.16-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix pid filtering when triggers are attached
tracing: Check pid filtering when creating events
|
|
If a event is filtered by pid and a trigger that requires processing of
the event to happen is a attached to the event, the discard portion does
not take the pid filtering into account, and the event will then be
recorded when it should not have been.
Cc: stable@vger.kernel.org
Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address three issues in the intel_pstate driver and fix two
problems related to hibernation.
Specifics:
- Make intel_pstate work correctly on Ice Lake server systems with
out-of-band performance control enabled (Adamos Ttofari).
- Fix EPP handling in intel_pstate during CPU offline and online in
the active mode (Rafael Wysocki).
- Make intel_pstate support ITMT on asymmetric systems with
overclocking enabled (Srinivas Pandruvada).
- Fix hibernation image saving when using the user space interface
based on the snapshot special device file (Evan Green).
- Make the hibernation code release the snapshot block device using
the same mode that was used when acquiring it (Thomas Zeitlhofer)"
* tag 'pm-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix snapshot partial write lengths
PM: hibernate: use correct mode for swsusp_close()
cpufreq: intel_pstate: ITMT support for overclocked system
cpufreq: intel_pstate: Fix active mode offline/online EPP handling
cpufreq: intel_pstate: Add Ice Lake server to out-of-band IDs
|
|
When pid filtering is activated in an instance, all of the events trace
files for that instance has the PID_FILTER flag set. This determines
whether or not pid filtering needs to be done on the event, otherwise the
event is executed as normal.
If pid filtering is enabled when an event is created (via a dynamic event
or modules), its flag is not updated to reflect the current state, and the
events are not filtered properly.
Cc: stable@vger.kernel.org
Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
snapshot_write() is inappropriately limiting the amount of data that can
be written in cases where a partial page has already been written. For
example, one would expect to be able to write 1 byte, then 4095 bytes to
the snapshot device, and have both of those complete fully (since now
we're aligned to a page again). But what ends up happening is we write 1
byte, then 4094/4095 bytes complete successfully.
The reason is that simple_write_to_buffer()'s second argument is the
total size of the buffer, not the size of the buffer minus the offset.
Since simple_write_to_buffer() accounts for the offset in its
implementation, snapshot_write() can just pass the full page size
directly down.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in
swsusp_check()") changed the opening mode of the block device to
(FMODE_READ | FMODE_EXCL).
In the corresponding calls to swsusp_close(), the mode is still just
FMODE_READ which triggers the warning in blkdev_flush_mapping() on
resume from hibernate.
So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the
device.
Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()")
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To hot unplug a CPU, the idle task on that CPU calls a few layers of C
code before finally leaving the kernel. When KASAN is in use, poisoned
shadow is left around for each of the active stack frames, and when
shadow call stacks are in use. When shadow call stacks (SCS) are in use
the task's saved SCS SP is left pointing at an arbitrary point within
the task's shadow call stack.
When a CPU is offlined than onlined back into the kernel, this stale
state can adversely affect execution. Stale KASAN shadow can alias new
stackframes and result in bogus KASAN warnings. A stale SCS SP is
effectively a memory leak, and prevents a portion of the shadow call
stack being used. Across a number of hotplug cycles the idle task's
entire shadow call stack can become unusable.
We previously fixed the KASAN issue in commit:
e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug")
... by removing any stale KASAN stack poison immediately prior to
onlining a CPU.
Subsequently in commit:
f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled")
... the refactoring left the KASAN and SCS cleanup in one-time idle
thread initialization code rather than something invoked prior to each
CPU being onlined, breaking both as above.
We fixed SCS (but not KASAN) in commit:
63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit")
... but as this runs in the context of the idle task being offlined it's
potentially fragile.
To fix these consistently and more robustly, reset the SCS SP and KASAN
shadow of a CPU's idle task immediately before we online that CPU in
bringup_cpu(). This ensures the idle task always has a consistent state
when it is running, and removes the need to so so when exiting an idle
task.
Whenever any thread is created, dup_task_struct() will give the task a
stack which is free of KASAN shadow, and initialize the task's SCS SP,
so there's no need to specially initialize either for idle thread within
init_idle(), as this was only necessary to handle hotplug cycles.
I've tested this on arm64 with:
* gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK
* clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK
... offlining and onlining CPUS with:
| while true; do
| for C in /sys/devices/system/cpu/cpu*/online; do
| echo 0 > $C;
| echo 1 > $C;
| done
| done
Fixes: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Link: https://lore.kernel.org/lkml/20211115113310.35693-1-mark.rutland@arm.com/
|
|
Add missing 'tu' variable initialization in the probes loop,
otherwise the head 'tu' is used instead of added probes.
Link: https://lkml.kernel.org/r/20211123142801.182530-1-jolsa@kernel.org
Cc: stable@vger.kernel.org
Fixes: 99c9a923e97a ("tracing/uprobe: Fix double perf_event linking on multiprobe uprobe")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
syzbot reported that the warning in perf_sigtrap() fires, saying that
the event's task does not match current:
| WARNING: CPU: 0 PID: 9090 at kernel/events/core.c:6446 perf_pending_event+0x40d/0x4b0 kernel/events/core.c:6513
| Modules linked in:
| CPU: 0 PID: 9090 Comm: syz-executor.1 Not tainted 5.15.0-syzkaller #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
| RIP: 0010:perf_sigtrap kernel/events/core.c:6446 [inline]
| RIP: 0010:perf_pending_event_disable kernel/events/core.c:6470 [inline]
| RIP: 0010:perf_pending_event+0x40d/0x4b0 kernel/events/core.c:6513
| ...
| Call Trace:
| <IRQ>
| irq_work_single+0x106/0x220 kernel/irq_work.c:211
| irq_work_run_list+0x6a/0x90 kernel/irq_work.c:242
| irq_work_run+0x4f/0xd0 kernel/irq_work.c:251
| __sysvec_irq_work+0x95/0x3d0 arch/x86/kernel/irq_work.c:22
| sysvec_irq_work+0x8e/0xc0 arch/x86/kernel/irq_work.c:17
| </IRQ>
| <TASK>
| asm_sysvec_irq_work+0x12/0x20 arch/x86/include/asm/idtentry.h:664
| RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline]
| RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 kernel/locking/spinlock.c:194
| ...
| coredump_task_exit kernel/exit.c:371 [inline]
| do_exit+0x1865/0x25c0 kernel/exit.c:771
| do_group_exit+0xe7/0x290 kernel/exit.c:929
| get_signal+0x3b0/0x1ce0 kernel/signal.c:2820
| arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868
| handle_signal_work kernel/entry/common.c:148 [inline]
| exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
| exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207
| __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
| syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300
| do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
| entry_SYSCALL_64_after_hwframe+0x44/0xae
On x86 this shouldn't happen, which has arch_irq_work_raise().
The test program sets up a perf event with sigtrap set to fire on the
'sched_wakeup' tracepoint, which fired in ttwu_do_wakeup().
This happened because the 'sched_wakeup' tracepoint also takes a task
argument passed on to perf_tp_event(), which is used to deliver the
event to that other task.
Since we cannot deliver synchronous signals to other tasks, skip an event if
perf_tp_event() is targeted at another task and perf_event_attr::sigtrap is
set, which will avoid ever entering perf_sigtrap() for such events.
Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: syzbot+663359e32ce6f1a305ad@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YYpoCOBmC/kJWfmI@elver.google.com
|
|
We found that a process with 10 thousnads threads has been encountered
a regression problem from Linux-v4.14 to Linux-v5.4. It is a kind of
workload which will concurrently allocate lots of memory in different
threads sometimes. In this case, we will see the down_read_trylock()
with a high hotspot. Therefore, we suppose that rwsem has a regression
at least since Linux-v5.4. In order to easily debug this problem, we
write a simply benchmark to create the similar situation lile the
following.
```c++
#include <sys/mman.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <sched.h>
#include <cstdio>
#include <cassert>
#include <thread>
#include <vector>
#include <chrono>
volatile int mutex;
void trigger(int cpu, char* ptr, std::size_t sz)
{
cpu_set_t set;
CPU_ZERO(&set);
CPU_SET(cpu, &set);
assert(pthread_setaffinity_np(pthread_self(), sizeof(set), &set) == 0);
while (mutex);
for (std::size_t i = 0; i < sz; i += 4096) {
*ptr = '\0';
ptr += 4096;
}
}
int main(int argc, char* argv[])
{
std::size_t sz = 100;
if (argc > 1)
sz = atoi(argv[1]);
auto nproc = std::thread::hardware_concurrency();
std::vector<std::thread> thr;
sz <<= 30;
auto* ptr = mmap(nullptr, sz, PROT_READ | PROT_WRITE, MAP_ANON |
MAP_PRIVATE, -1, 0);
assert(ptr != MAP_FAILED);
char* cptr = static_cast<char*>(ptr);
auto run = sz / nproc;
run = (run >> 12) << 12;
mutex = 1;
for (auto i = 0U; i < nproc; ++i) {
thr.emplace_back(std::thread([i, cptr, run]() { trigger(i, cptr, run); }));
cptr += run;
}
rusage usage_start;
getrusage(RUSAGE_SELF, &usage_start);
auto start = std::chrono::system_clock::now();
mutex = 0;
for (auto& t : thr)
t.join();
rusage usage_end;
getrusage(RUSAGE_SELF, &usage_end);
auto end = std::chrono::system_clock::now();
timeval utime;
timeval stime;
timersub(&usage_end.ru_utime, &usage_start.ru_utime, &utime);
timersub(&usage_end.ru_stime, &usage_start.ru_stime, &stime);
printf("usr: %ld.%06ld\n", utime.tv_sec, utime.tv_usec);
printf("sys: %ld.%06ld\n", stime.tv_sec, stime.tv_usec);
printf("real: %lu\n",
std::chrono::duration_cast<std::chrono::milliseconds>(end -
start).count());
return 0;
}
```
The functionality of above program is simply which creates `nproc`
threads and each of them are trying to touch memory (trigger page
fault) on different CPU. Then we will see the similar profile by
`perf top`.
25.55% [kernel] [k] down_read_trylock
14.78% [kernel] [k] handle_mm_fault
13.45% [kernel] [k] up_read
8.61% [kernel] [k] clear_page_erms
3.89% [kernel] [k] __do_page_fault
The highest hot instruction, which accounts for about 92%, in
down_read_trylock() is cmpxchg like the following.
91.89 │ lock cmpxchg %rdx,(%rdi)
Sice the problem is found by migrating from Linux-v4.14 to Linux-v5.4,
so we easily found that the commit ddb20d1d3aed ("locking/rwsem: Optimize
down_read_trylock()") caused the regression. The reason is that the
commit assumes the rwsem is not contended at all. But it is not always
true for mmap lock which could be contended with thousands threads.
So most threads almost need to run at least 2 times of "cmpxchg" to
acquire the lock. The overhead of atomic operation is higher than
non-atomic instructions, which caused the regression.
By using the above benchmark, the real executing time on a x86-64 system
before and after the patch were:
Before Patch After Patch
# of Threads real real reduced by
------------ ------ ------ ----------
1 65,373 65,206 ~0.0%
4 15,467 15,378 ~0.5%
40 6,214 5,528 ~11.0%
For the uncontended case, the new down_read_trylock() is the same as
before. For the contended cases, the new down_read_trylock() is faster
than before. The more contended, the more fast.
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20211118094455.9068-1-songmuchun@bytedance.com
|
|
There are some inconsistency in the way that the handoff bit is being
handled in readers and writers that lead to a race condition.
Firstly, when a queue head writer set the handoff bit, it will clear
it when the writer is being killed or interrupted on its way out
without acquiring the lock. That is not the case for a queue head
reader. The handoff bit will simply be inherited by the next waiter.
Secondly, in the out_nolock path of rwsem_down_read_slowpath(), both
the waiter and handoff bits are cleared if the wait queue becomes
empty. For rwsem_down_write_slowpath(), however, the handoff bit is
not checked and cleared if the wait queue is empty. This can
potentially make the handoff bit set with empty wait queue.
Worse, the situation in rwsem_down_write_slowpath() relies on wstate,
a variable set outside of the critical section containing the ->count
manipulation, this leads to race condition where RWSEM_FLAG_HANDOFF
can be double subtracted, corrupting ->count.
To make the handoff bit handling more consistent and robust, extract
out handoff bit clearing code into the new rwsem_del_waiter() helper
function. Also, completely eradicate wstate; always evaluate
everything inside the same critical section.
The common function will only use atomic_long_andnot() to clear bits
when the wait queue is empty to avoid possible race condition. If the
first waiter with handoff bit set is killed or interrupted to exit the
slowpath without acquiring the lock, the next waiter will inherit the
handoff bit.
While at it, simplify the trylock for loop in
rwsem_down_write_slowpath() to make it easier to read.
Fixes: 4f23dbc1e657 ("locking/rwsem: Implement lock handoff to prevent lock starvation")
Reported-by: Zhenhua Ma <mazhenhua@xiaomi.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211116012912.723980-1-longman@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix double free in destroy_hist_field
- Harden memset() of trace_iterator structure
- Do not warn in trace printk check when test buffer fills up
* tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Don't use out-of-sync va_list in event printing
tracing: Use memset_startat() to zero struct trace_iterator
tracing/histogram: Fix UAF in destroy_hist_field()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
cleanups.
This is essentially the change you suggested with all of i's dotted
and the t's crossed so that ptrace can intercept all of the cases it
has been able to intercept the past, and all of the cases that made it
to exit without giving ptrace a chance still don't give ptrace a
chance"
* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Replace force_fatal_sig with force_exit_sig when in doubt
signal: Don't always set SA_IMMUTABLE for forced signals
|
|
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect to be
able to trap synchronous SIGTRAP and SIGSEGV even when the target
process is not configured to handle those signals.
Update force_sig_to_task to support both the case when we can allow
the debugger to intercept and possibly ignore the signal and the case
when it is not safe to let userspace know about the signal until the
process has exited.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable@vger.kernel.org
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Link: https://lkml.kernel.org/r/877dd5qfw5.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
If trace_seq becomes full, trace_seq_vprintf() no longer consumes
arguments from va_list, making va_list out of sync with format
processing by trace_check_vprintf().
This causes va_arg() in trace_check_vprintf() to return wrong
positional argument, which results into a WARN_ON_ONCE() hit.
ftrace_stress_test from LTP triggers this situation.
Fix it by explicitly avoiding further use if va_list at the point
when it's consistency can no longer be guaranteed.
Link: https://lkml.kernel.org/r/20211118145516.13219-1-nikita.yushchenko@virtuozzo.com
Signed-off-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() to avoid confusing memset() about writing beyond
the target struct member.
Link: https://lkml.kernel.org/r/20211118202217.1285588-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, mac80211.
Current release - regressions:
- devlink: don't throw an error if flash notification sent before
devlink visible
- page_pool: Revert "page_pool: disable dma mapping support...",
turns out there are active arches who need it
Current release - new code bugs:
- amt: cancel delayed_work synchronously in amt_fini()
Previous releases - regressions:
- xsk: fix crash on double free in buffer pool
- bpf: fix inner map state pruning regression causing program
rejections
- mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
preventing mis-selecting the best effort queue
- mac80211: do not access the IV when it was stripped
- mac80211: fix radiotap header generation, off-by-one
- nl80211: fix getting radio statistics in survey dump
- e100: fix device suspend/resume
Previous releases - always broken:
- tcp: fix uninitialized access in skb frags array for Rx 0cp
- bpf: fix toctou on read-only map's constant scalar tracking
- bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
progs
- tipc: only accept encrypted MSG_CRYPTO msgs
- smc: transfer remaining wait queue entries during fallback, fix
missing wake ups
- udp: validate checksum in udp_read_sock() (when sockmap is used)
- sched: act_mirred: drop dst for the direction from egress to
ingress
- virtio_net_hdr_to_skb: count transport header in UFO, prevent
allowing bad skbs into the stack
- nfc: reorder the logic in nfc_{un,}register_device, fix unregister
- ipsec: check return value of ipv6_skip_exthdr
- usb: r8152: add MAC passthrough support for more Lenovo Docks"
* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
ipv6: check return value of ipv6_skip_exthdr
e100: fix device suspend/resume
devlink: Don't throw an error if flash notification sent before devlink visible
page_pool: Revert "page_pool: disable dma mapping support..."
ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
octeontx2-af: debugfs: don't corrupt user memory
NFC: add NCI_UNREG flag to eliminate the race
NFC: reorder the logic in nfc_{un,}register_device
NFC: reorganize the functions in nci_request
tipc: check for null after calling kmemdup
i40e: Fix display error code in dmesg
i40e: Fix creation of first queue by omitting it if is not power of two
i40e: Fix warning message and call stack during rmmod i40e driver
i40e: Fix ping is lost after configuring ADq on VF
i40e: Fix changing previously set num_queue_pairs for PFs
i40e: Fix NULL ptr dereference on VSI filter sync
i40e: Fix correct max_pkt_size on VF RX queue
...
|
|
Calling destroy_hist_field() on an expression will recursively free
any operands associated with the expression. If during expression
parsing the operands of the expression are already set when an error
is encountered, there is no need to explicity free the operands. Doing
so will result in destroy_hist_field() being called twice for the
operands and lead to a use-after-free (UAF) error.
If the operands are associated with the expression, only call
destroy_hist_field() on the expression since the operands will be
recursively freed.
Link: https://lore.kernel.org/all/CAHk-=wgcrEbFgkw9720H3tW-AhHOoEKhYwZinYJw4FpzSaJ6_Q@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211118011542.1420131-1-kaleshsingh@google.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Fixes: 8b5d46fd7a38 ("tracing/histogram: Optimize division by constants")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Try to flush backtraces from other CPUs also on the local one. This
was a regression caused by printk_safe buffers removal.
- Remove header dependency warning.
* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove printk.h inclusion in percpu.h
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
|
|
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-11-16
We've added 12 non-merge commits during the last 5 day(s) which contain
a total of 23 files changed, 573 insertions(+), 73 deletions(-).
The main changes are:
1) Fix pruning regression where verifier went overly conservative rejecting
previsouly accepted programs, from Alexei Starovoitov and Lorenz Bauer.
2) Fix verifier TOCTOU bug when using read-only map's values as constant
scalars during verification, from Daniel Borkmann.
3) Fix a crash due to a double free in XSK's buffer pool, from Magnus Karlsson.
4) Fix libbpf regression when cross-building runqslower, from Jean-Philippe Brucker.
5) Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_*() helpers in tracing
programs due to deadlock possibilities, from Dmitrii Banshchikov.
6) Fix checksum validation in sockmap's udp_read_sock() callback, from Cong Wang.
7) Various BPF sample fixes such as XDP stats in xdp_sample_user, from Alexander Lobakin.
8) Fix libbpf gen_loader error handling wrt fd cleanup, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
udp: Validate checksum in udp_read_sock()
bpf: Fix toctou on read-only map's constant scalar tracking
samples/bpf: Fix build error due to -isystem removal
selftests/bpf: Add tests for restricted helpers
bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs
libbpf: Perform map fd cleanup for gen_loader in case of error
samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu
tools/runqslower: Fix cross-build
samples/bpf: Fix summary per-sec stats in xdp_sample_user
selftests/bpf: Check map in map pruning
bpf: Fix inner map state pruning regression.
xsk: Fix crash on double free in buffer pool
====================
Link: https://lore.kernel.org/r/20211116141134.6490-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit a23740ec43ba ("bpf: Track contents of read-only maps as scalars") is
checking whether maps are read-only both from BPF program side and user space
side, and then, given their content is constant, reading out their data via
map->ops->map_direct_value_addr() which is then subsequently used as known
scalar value for the register, that is, it is marked as __mark_reg_known()
with the read value at verification time. Before a23740ec43ba, the register
content was marked as an unknown scalar so the verifier could not make any
assumptions about the map content.
The current implementation however is prone to a TOCTOU race, meaning, the
value read as known scalar for the register is not guaranteed to be exactly
the same at a later point when the program is executed, and as such, the
prior made assumptions of the verifier with regards to the program will be
invalid which can cause issues such as OOB access, etc.
While the BPF_F_RDONLY_PROG map flag is always fixed and required to be
specified at map creation time, the map->frozen property is initially set to
false for the map given the map value needs to be populated, e.g. for global
data sections. Once complete, the loader "freezes" the map from user space
such that no subsequent updates/deletes are possible anymore. For the rest
of the lifetime of the map, this freeze one-time trigger cannot be undone
anymore after a successful BPF_MAP_FREEZE cmd return. Meaning, any new BPF_*
cmd calls which would update/delete map entries will be rejected with -EPERM
since map_get_sys_perms() removes the FMODE_CAN_WRITE permission. This also
means that pending update/delete map entries must still complete before this
guarantee is given. This corner case is not an issue for loaders since they
create and prepare such program private map in successive steps.
However, a malicious user is able to trigger this TOCTOU race in two different
ways: i) via userfaultfd, and ii) via batched updates. For i) userfaultfd is
used to expand the competition interval, so that map_update_elem() can modify
the contents of the map after map_freeze() and bpf_prog_load() were executed.
This works, because userfaultfd halts the parallel thread which triggered a
map_update_elem() at the time where we copy key/value from the user buffer and
this already passed the FMODE_CAN_WRITE capability test given at that time the
map was not "frozen". Then, the main thread performs the map_freeze() and
bpf_prog_load(), and once that had completed successfully, the other thread
is woken up to complete the pending map_update_elem() which then changes the
map content. For ii) the idea of the batched update is similar, meaning, when
there are a large number of updates to be processed, it can increase the
competition interval between the two. It is therefore possible in practice to
modify the contents of the map after executing map_freeze() and bpf_prog_load().
One way to fix both i) and ii) at the same time is to expand the use of the
map's map->writecnt. The latter was introduced in fc9702273e2e ("bpf: Add mmap()
support for BPF_MAP_TYPE_ARRAY") and further refined in 1f6cb19be2e2 ("bpf:
Prevent re-mmap()'ing BPF map as writable for initially r/o mapping") with
the rationale to make a writable mmap()'ing of a map mutually exclusive with
read-only freezing. The counter indicates writable mmap() mappings and then
prevents/fails the freeze operation. Its semantics can be expanded beyond
just mmap() by generally indicating ongoing write phases. This would essentially
span any parallel regular and batched flavor of update/delete operation and
then also have map_freeze() fail with -EBUSY. For the check_mem_access() in
the verifier we expand upon the bpf_map_is_rdonly() check ensuring that all
last pending writes have completed via bpf_map_write_active() test. Once the
map->frozen is set and bpf_map_write_active() indicates a map->writecnt of 0
only then we are really guaranteed to use the map's data as known constants.
For map->frozen being set and pending writes in process of still being completed
we fall back to marking that register as unknown scalar so we don't end up
making assumptions about it. With this, both TOCTOU reproducers from i) and
ii) are fixed.
Note that the map->writecnt has been converted into a atomic64 in the fix in
order to avoid a double freeze_mutex mutex_{un,}lock() pair when updating
map->writecnt in the various map update/delete BPF_* cmd flavors. Spanning
the freeze_mutex over entire map update/delete operations in syscall side
would not be possible due to then causing everything to be serialized.
Similarly, something like synchronize_rcu() after setting map->frozen to wait
for update/deletes to complete is not possible either since it would also
have to span the user copy which can sleep. On the libbpf side, this won't
break d66562fba1ce ("libbpf: Add BPF object skeleton support") as the
anonymous mmap()-ed "map initialization image" is remapped as a BPF map-backed
mmap()-ed memory where for .rodata it's non-writable.
Fixes: a23740ec43ba ("bpf: Track contents of read-only maps as scalars")
Reported-by: w1tcher.bupt@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
