| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Lee pointed out issue found by syscaller [0] hitting BUG in prog array
map poke update in prog_array_map_poke_run function due to error value
returned from bpf_arch_text_poke function.
There's race window where bpf_arch_text_poke can fail due to missing
bpf program kallsym symbols, which is accounted for with check for
-EINVAL in that BUG_ON call.
The problem is that in such case we won't update the tail call jump
and cause imbalance for the next tail call update check which will
fail with -EBUSY in bpf_arch_text_poke.
I'm hitting following race during the program load:
CPU 0 CPU 1
bpf_prog_load
bpf_check
do_misc_fixups
prog_array_map_poke_track
map_update_elem
bpf_fd_array_map_update_elem
prog_array_map_poke_run
bpf_arch_text_poke returns -EINVAL
bpf_prog_kallsyms_add
After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next
poke update fails on expected jump instruction check in bpf_arch_text_poke
with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run.
Similar race exists on the program unload.
Fixing this by moving the update to bpf_arch_poke_desc_update function which
makes sure we call __bpf_arch_text_poke that skips the bpf address check.
Each architecture has slightly different approach wrt looking up bpf address
in bpf_arch_text_poke, so instead of splitting the function or adding new
'checkip' argument in previous version, it seems best to move the whole
map_poke_run update as arch specific code.
[0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810
Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Reported-by: syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Lee Jones <lee@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org
|
|
Bpf cpu=v4 support is introduced in [1] and Commit 4cd58e9af8b9
("bpf: Support new 32bit offset jmp instruction") added support for new
32bit offset jmp instruction. Unfortunately, in function
bpf_adj_delta_to_off(), for new branch insn with 32bit offset, the offset
(plus/minor a small delta) compares to 16-bit offset bound
[S16_MIN, S16_MAX], which caused the following verification failure:
$ ./test_progs-cpuv4 -t verif_scale_pyperf180
...
insn 10 cannot be patched due to 16-bit range
...
libbpf: failed to load object 'pyperf180.bpf.o'
scale_test:FAIL:expect_success unexpected error: -12 (errno 12)
#405 verif_scale_pyperf180:FAIL
Note that due to recent llvm18 development, the patch [2] (already applied
in bpf-next) needs to be applied to bpf tree for testing purpose.
The fix is rather simple. For 32bit offset branch insn, the adjusted
offset compares to [S32_MIN, S32_MAX] and then verification succeeded.
[1] https://lore.kernel.org/all/20230728011143.3710005-1-yonghong.song@linux.dev
[2] https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev
Fixes: 4cd58e9af8b9 ("bpf: Support new 32bit offset jmp instruction")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231201024640.3417057-1-yonghong.song@linux.dev
|
|
bpf_mem_cache_alloc_flags() may call __alloc() directly when there is no
free object in free list, but it doesn't initialize the allocation hint
for the returned pointer. It may lead to bad memory dereference when
freeing the pointer, so fix it by initializing the allocation hint.
Fixes: 822fb26bdb55 ("bpf: Add a hint to allocated objects.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231111043821.2258513-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In some cases verifier can't infer convergence of the bpf_loop()
iteration. E.g. for the following program:
static int cb(__u32 idx, struct num_context* ctx)
{
ctx->i++;
return 0;
}
SEC("?raw_tp")
int prog(void *_)
{
struct num_context ctx = { .i = 0 };
__u8 choice_arr[2] = { 0, 1 };
bpf_loop(2, cb, &ctx, 0);
return choice_arr[ctx.i];
}
Each 'cb' simulation would eventually return to 'prog' and reach
'return choice_arr[ctx.i]' statement. At which point ctx.i would be
marked precise, thus forcing verifier to track multitude of separate
states with {.i=0}, {.i=1}, ... at bpf_loop() callback entry.
This commit allows "brute force" handling for such cases by limiting
number of callback body simulations using 'umax' value of the first
bpf_loop() parameter.
For this, extend bpf_func_state with 'callback_depth' field.
Increment this field when callback visiting state is pushed to states
traversal stack. For frame #N it's 'callback_depth' field counts how
many times callback with frame depth N+1 had been executed.
Use bpf_func_state specifically to allow independent tracking of
callback depths when multiple nested bpf_loop() calls are present.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Callbacks are similar to open coded iterators, so add imprecise
widening logic for callback body processing. This makes callback based
loops behave identically to open coded iterators, e.g. allowing to
verify programs like below:
struct ctx { u32 i; };
int cb(u32 idx, struct ctx* ctx)
{
++ctx->i;
return 0;
}
...
struct ctx ctx = { .i = 0 };
bpf_loop(100, cb, &ctx, 0);
...
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Prior to this patch callbacks were handled as regular function calls,
execution of callback body was modeled exactly once.
This patch updates callbacks handling logic as follows:
- introduces a function push_callback_call() that schedules callback
body verification in env->head stack;
- updates prepare_func_exit() to reschedule callback body verification
upon BPF_EXIT;
- as calls to bpf_*_iter_next(), calls to callback invoking functions
are marked as checkpoints;
- is_state_visited() is updated to stop callback based iteration when
some identical parent state is found.
Paths with callback function invoked zero times are now verified first,
which leads to necessity to modify some selftests:
- the following negative tests required adding release/unlock/drop
calls to avoid previously masked unrelated error reports:
- cb_refs.c:underflow_prog
- exceptions_fail.c:reject_rbtree_add_throw
- exceptions_fail.c:reject_with_cp_reference
- the following precision tracking selftests needed change in expected
log trace:
- verifier_subprog_precision.c:callback_result_precise
(note: r0 precision is no longer propagated inside callback and
I think this is a correct behavior)
- verifier_subprog_precision.c:parent_callee_saved_reg_precise_with_callback
- verifier_subprog_precision.c:parent_stack_slot_precise_with_callback
Reported-by: Andrew Werner <awerner32@gmail.com>
Closes: https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move code for simulated stack frame creation to a separate utility
function. This function would be used in the follow-up change for
callbacks handling.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Split check_reg_arg() into two utility functions:
- check_reg_arg() operating on registers from current verifier state;
- __check_reg_arg() operating on a specific set of registers passed as
a parameter;
The __check_reg_arg() function would be used by a follow-up change for
callbacks handling.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Kirill Shutemov reported significant percpu memory consumption increase after
booting in 288-cpu VM ([1]) due to commit 41a5db8d8161 ("bpf: Add support for
non-fix-size percpu mem allocation"). The percpu memory consumption is
increased from 111MB to 969MB. The number is from /proc/meminfo.
I tried to reproduce the issue with my local VM which at most supports upto
255 cpus. With 252 cpus, without the above commit, the percpu memory
consumption immediately after boot is 57MB while with the above commit the
percpu memory consumption is 231MB.
This is not good since so far percpu memory from bpf memory allocator is not
widely used yet. Let us change pre-allocation in init stage to on-demand
allocation when verifier detects there is a need of percpu memory for bpf
program. With this change, percpu memory consumption after boot can be reduced
signicantly.
[1] https://lore.kernel.org/lkml/20231109154934.4saimljtqx625l3v@box.shutemov.name/
Fixes: 41a5db8d8161 ("bpf: Add support for non-fix-size percpu mem allocation")
Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231111013928.948838-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When BPF program is verified in privileged mode, BPF verifier allows
bounded loops. This means that from CFG point of view there are
definitely some back-edges. Original commit adjusted check_cfg() logic
to not detect back-edges in control flow graph if they are resulting
from conditional jumps, which the idea that subsequent full BPF
verification process will determine whether such loops are bounded or
not, and either accept or reject the BPF program. At least that's my
reading of the intent.
Unfortunately, the implementation of this idea doesn't work correctly in
all possible situations. Conditional jump might not result in immediate
back-edge, but just a few unconditional instructions later we can arrive
at back-edge. In such situations check_cfg() would reject BPF program
even in privileged mode, despite it might be bounded loop. Next patch
adds one simple program demonstrating such scenario.
To keep things simple, instead of trying to detect back edges in
privileged mode, just assume every back edge is valid and let subsequent
BPF verification prove or reject bounded loops.
Note a few test changes. For unknown reason, we have a few tests that
are specified to detect a back-edge in a privileged mode, but looking at
their code it seems like the right outcome is passing check_cfg() and
letting subsequent verification to make a decision about bounded or not
bounded looping.
Bounded recursion case is also interesting. The example should pass, as
recursion is limited to just a few levels and so we never reach maximum
number of nested frames and never exhaust maximum stack depth. But the
way that max stack depth logic works today it falsely detects this as
exceeding max nested frame count. This patch series doesn't attempt to
fix this orthogonal problem, so we just adjust expected verifier failure.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 2589726d12a1 ("bpf: introduce bounded loops")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231110061412.2995786-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix an edge case in __mark_chain_precision() which prematurely stops
backtracking instructions in a state if it happens that state's first
and last instruction indexes are the same. This situations doesn't
necessarily mean that there were no instructions simulated in a state,
but rather that we starting from the instruction, jumped around a bit,
and then ended up at the same instruction before checkpointing or
marking precision.
To distinguish between these two possible situations, we need to consult
jump history. If it's empty or contain a single record "bridging" parent
state and first instruction of processed state, then we indeed
backtracked all instructions in this state. But if history is not empty,
we are definitely not done yet.
Move this logic inside get_prev_insn_idx() to contain it more nicely.
Use -ENOENT return code to denote "we are out of instructions"
situation.
This bug was exposed by verifier_loop1.c's bounded_recursion subtest, once
the next fix in this patch set is applied.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231110002638.4168352-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ldimm64 instructions are 16-byte long, and so have to be handled
appropriately in check_cfg(), just like the rest of BPF verifier does.
This has implications in three places:
- when determining next instruction for non-jump instructions;
- when determining next instruction for callback address ldimm64
instructions (in visit_func_call_insn());
- when checking for unreachable instructions, where second half of
ldimm64 is expected to be unreachable;
We take this also as an opportunity to report jump into the middle of
ldimm64. And adjust few test_verifier tests accordingly.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Fixes: 475fb78fbf48 ("bpf: verifier (add branch/goto checks)")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231110002638.4168352-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BTF_TYPE_SAFE_TRUSTED(struct bpf_iter__task) in verifier.c wanted to
teach BPF verifier that bpf_iter__task -> task is a trusted ptr. But it
doesn't work well.
The reason is, bpf_iter__task -> task would go through btf_ctx_access()
which enforces the reg_type of 'task' is ctx_arg_info->reg_type, and in
task_iter.c, we actually explicitly declare that the
ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL.
Actually we have a previous case like this[1] where PTR_TRUSTED is added to
the arg flag for map_iter.
This patch sets ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL |
PTR_TRUSTED in task_reg_info.
Similarly, bpf_cgroup_reg_info -> cgroup is also PTR_TRUSTED since we are
under the protection of cgroup_mutex and we would check cgroup_is_dead()
in __cgroup_iter_seq_show().
This patch is to improve the user experience of the newly introduced
bpf_iter_css_task kfunc before hitting the mainline. The Fixes tag is
pointing to the commit introduced the bpf_iter_css_task kfunc.
Link[1]:https://lore.kernel.org/all/20230706133932.45883-3-aspsk@isovalent.com/
Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-2-zhouchuyi@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
BPF_END and BPF_NEG has a different specification for the source bit in
the opcode compared to other ALU/ALU64 instructions, and is either
reserved or use to specify the byte swap endianness. In both cases the
source bit does not encode source operand location, and src_reg is a
reserved field.
backtrack_insn() currently does not differentiate BPF_END and BPF_NEG
from other ALU/ALU64 instructions, which leads to r0 being incorrectly
marked as precise when processing BPF_ALU | BPF_TO_BE | BPF_END
instructions. This commit teaches backtrack_insn() to correctly mark
precision for such case.
While precise tracking of BPF_NEG and other BPF_END instructions are
correct and does not need fixing, this commit opt to process all BPF_NEG
and BPF_END instructions within the same if-clause to better align with
current convention used in the verifier (e.g. check_alu_op).
Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Cc: stable@vger.kernel.org
Reported-by: Mohamed Mahmoud <mmahmoud@redhat.com>
Closes: https://lore.kernel.org/r/87jzrrwptf.fsf@toke.dk
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Tao Lyu <tao.lyu@epfl.ch>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102053913.12004-2-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The newly added open-coded css_task iter would try to hold the global
css_set_lock in bpf_iter_css_task_new, so the bpf side has to be careful in
where it allows to use this iter. The mainly concern is dead locking on
css_set_lock. check_css_task_iter_allowlist() in verifier enforced css_task
can only be used in bpf_lsm hooks and sleepable bpf_iter.
This patch relax the allowlist for css_task iter. Any lsm and any iter
(even non-sleepable) and any sleepable are safe since they would not hold
the css_set_lock before entering BPF progs context.
This patch also fixes the misused BPF_TRACE_ITER in
check_css_task_iter_allowlist which compared bpf_prog_type with
bpf_attach_type.
Fixes: 9c66dc94b62ae ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231031050438.93297-2-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When there are concurrent uref release and bpf timer init operations,
the following sequence diagram is possible. It will break the guarantee
provided by bpf_timer: bpf_timer will still be alive after userspace
application releases or unpins the map. It also will lead to kmemleak
for old kernel version which doesn't release bpf_timer when map is
released.
bpf program X:
bpf_timer_init()
lock timer->lock
read timer->timer as NULL
read map->usercnt != 0
process Y:
close(map_fd)
// put last uref
bpf_map_put_uref()
atomic_dec_and_test(map->usercnt)
array_map_free_timers()
bpf_timer_cancel_and_free()
// just return
read timer->timer is NULL
t = bpf_map_kmalloc_node()
timer->timer = t
unlock timer->lock
Fix the problem by checking map->usercnt after timer->timer is assigned,
so when there are concurrent uref release and bpf timer init, either
bpf_timer_cancel_and_free() from uref release reads a no-NULL timer
or the newly-added atomic64_read() returns a zero usercnt.
Because atomic_dec_and_test(map->usercnt) and READ_ONCE(timer->timer)
in bpf_timer_cancel_and_free() are not protected by a lock, so add
a memory barrier to guarantee the order between map->usercnt and
timer->timer. Also use WRITE_ONCE(timer->timer, x) to match the lockless
read of timer->timer in bpf_timer_cancel_and_free().
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Closes: https://lore.kernel.org/bpf/CABcoxUaT2k9hWsS1tNgXyoU3E-=PuOgMn737qK984fbFmfYixQ@mail.gmail.com
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231030063616.1653024-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF kfuncs are meant to be called from BPF programs. Accordingly, most
kfuncs are not called from anywhere in the kernel, which the
-Wmissing-prototypes warning is unhappy about. We've peppered
__diag_ignore_all("-Wmissing-prototypes", ... everywhere kfuncs are
defined in the codebase to suppress this warning.
This patch adds two macros meant to bound one or many kfunc definitions.
All existing kfunc definitions which use these __diag calls to suppress
-Wmissing-prototypes are migrated to use the newly-introduced macros.
A new __diag_ignore_all - for "-Wmissing-declarations" - is added to the
__bpf_kfunc_start_defs macro based on feedback from Andrii on an earlier
version of this patch [0] and another recent mailing list thread [1].
In the future we might need to ignore different warnings or do other
kfunc-specific things. This change will make it easier to make such
modifications for all kfunc defs.
[0]: https://lore.kernel.org/bpf/CAEf4BzaE5dRWtK6RPLnjTW-MW9sx9K3Fn6uwqCTChK2Dcb1Xig@mail.gmail.com/
[1]: https://lore.kernel.org/bpf/ZT+2qCc%2FaXep0%2FLf@krava/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In check_stack_write_fixed_off(), imm value is cast to u32 before being
spilled to the stack. Therefore, the sign information is lost, and the
range information is incorrect when load from the stack again.
For the following prog:
0: r2 = r10
1: *(u64*)(r2 -40) = -44
2: r0 = *(u64*)(r2 - 40)
3: if r0 s<= 0xa goto +2
4: r0 = 1
5: exit
6: r0 = 0
7: exit
The verifier gives:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
1: (7a) *(u64 *)(r2 -40) = -44 ; R2_w=fp0 fp-40_w=4294967252
2: (79) r0 = *(u64 *)(r2 -40) ; R0_w=4294967252 R2_w=fp0
fp-40_w=4294967252
3: (c5) if r0 s< 0xa goto pc+2
mark_precise: frame0: last_idx 3 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (79) r0 = *(u64 *)(r2 -40)
3: R0_w=4294967252
4: (b7) r0 = 1 ; R0_w=1
5: (95) exit
verification time 7971 usec
stack depth 40
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0
So remove the incorrect cast, since imm field is declared as s32, and
__mark_reg_known() takes u64, so imm would be correctly sign extended
by compiler.
Fixes: ecdf985d7615 ("bpf: track immediate values written to stack by BPF_ST instruction")
Cc: stable@vger.kernel.org
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231101-fix-check-stack-write-v3-1-f05c2b1473d5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Our MPTCP CI complained [1] -- and KBuild too -- that it was no longer
possible to build the kernel without CONFIG_CGROUPS:
kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_new':
kernel/bpf/task_iter.c:919:14: error: 'CSS_TASK_ITER_PROCS' undeclared (first use in this function)
919 | case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
| ^~~~~~~~~~~~~~~~~~~
kernel/bpf/task_iter.c:919:14: note: each undeclared identifier is reported only once for each function it appears in
kernel/bpf/task_iter.c:919:36: error: 'CSS_TASK_ITER_THREADED' undeclared (first use in this function)
919 | case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
| ^~~~~~~~~~~~~~~~~~~~~~
kernel/bpf/task_iter.c:927:60: error: invalid application of 'sizeof' to incomplete type 'struct css_task_iter'
927 | kit->css_it = bpf_mem_alloc(&bpf_global_ma, sizeof(struct css_task_iter));
| ^~~~~~
kernel/bpf/task_iter.c:930:9: error: implicit declaration of function 'css_task_iter_start'; did you mean 'task_seq_start'? [-Werror=implicit-function-declaration]
930 | css_task_iter_start(css, flags, kit->css_it);
| ^~~~~~~~~~~~~~~~~~~
| task_seq_start
kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_next':
kernel/bpf/task_iter.c:940:16: error: implicit declaration of function 'css_task_iter_next'; did you mean 'class_dev_iter_next'? [-Werror=implicit-function-declaration]
940 | return css_task_iter_next(kit->css_it);
| ^~~~~~~~~~~~~~~~~~
| class_dev_iter_next
kernel/bpf/task_iter.c:940:16: error: returning 'int' from a function with return type 'struct task_struct *' makes pointer from integer without a cast [-Werror=int-conversion]
940 | return css_task_iter_next(kit->css_it);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_destroy':
kernel/bpf/task_iter.c:949:9: error: implicit declaration of function 'css_task_iter_end' [-Werror=implicit-function-declaration]
949 | css_task_iter_end(kit->css_it);
| ^~~~~~~~~~~~~~~~~
This patch simply surrounds with a #ifdef the new code requiring CGroups
support. It seems enough for the compiler and this is similar to
bpf_iter_css_{new,next,destroy}() functions where no other #ifdef have
been added in kernel/bpf/helpers.c and in the selftests.
Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs")
Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/6665206927
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310260528.aHWgVFqq-lkp@intel.com/
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
[ added missing ifdefs for BTF_ID cgroup definitions ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231101181601.1493271-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull io_uring {get,set}sockopt support from Jens Axboe:
"This adds support for using getsockopt and setsockopt via io_uring.
The main use cases for this is to enable use of direct descriptors,
rather than first instantiating a normal file descriptor, doing the
option tweaking needed, then turning it into a direct descriptor. With
this support, we can avoid needing a regular file descriptor
completely.
The net and bpf bits have been signed off on their side"
* tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux:
selftests/bpf/sockopt: Add io_uring support
io_uring/cmd: Introduce SOCKET_URING_OP_SETSOCKOPT
io_uring/cmd: Introduce SOCKET_URING_OP_GETSOCKOPT
io_uring/cmd: return -EOPNOTSUPP if net is disabled
selftests/net: Extract uring helpers to be reusable
tools headers: Grab copy of io_uring.h
io_uring/cmd: Pass compat mode in issue_flags
net/socket: Break down __sys_getsockopt
net/socket: Break down __sys_setsockopt
bpf: Add sockptr support for setsockopt
bpf: Add sockptr support for getsockopt
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
|
|
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Rename and export helpers that get write access to a mount. They
are used in overlayfs to get write access to the upper mount.
- Print the pretty name of the root device on boot failure. This
helps in scenarios where we would usually only print
"unknown-block(1,2)".
- Add an internal SB_I_NOUMASK flag. This is another part in the
endless POSIX ACL saga in a way.
When POSIX ACLs are enabled via SB_POSIXACL the vfs cannot strip
the umask because if the relevant inode has POSIX ACLs set it might
take the umask from there. But if the inode doesn't have any POSIX
ACLs set then we apply the umask in the filesytem itself. So we end
up with:
(1) no SB_POSIXACL -> strip umask in vfs
(2) SB_POSIXACL -> strip umask in filesystem
The umask semantics associated with SB_POSIXACL allowed filesystems
that don't even support POSIX ACLs at all to raise SB_POSIXACL
purely to avoid umask stripping. That specifically means NFS v4 and
Overlayfs. NFS v4 does it because it delegates this to the server
and Overlayfs because it needs to delegate umask stripping to the
upper filesystem, i.e., the filesystem used as the writable layer.
This went so far that SB_POSIXACL is raised eve on kernels that
don't even have POSIX ACL support at all.
Stop this blatant abuse and add SB_I_NOUMASK which is an internal
superblock flag that filesystems can raise to opt out of umask
handling. That should really only be the two mentioned above. It's
not that we want any filesystems to do this. Ideally we have all
umask handling always in the vfs.
- Make overlayfs use SB_I_NOUMASK too.
- Now that we have SB_I_NOUMASK, stop checking for SB_POSIXACL in
IS_POSIXACL() if the kernel doesn't have support for it. This is a
very old patch but it's only possible to do this now with the wider
cleanup that was done.
- Follow-up work on fake path handling from last cycle. Citing mostly
from Amir:
When overlayfs was first merged, overlayfs files of regular files
and directories, the ones that are installed in file table, had a
"fake" path, namely, f_path is the overlayfs path and f_inode is
the "real" inode on the underlying filesystem.
In v6.5, we took another small step by introducing of the
backing_file container and the file_real_path() helper. This change
allowed vfs and filesystem code to get the "real" path of an
overlayfs backing file. With this change, we were able to make
fsnotify work correctly and report events on the "real" filesystem
objects that were accessed via overlayfs.
This method works fine, but it still leaves the vfs vulnerable to
new code that is not aware of files with fake path. A recent
example is commit db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get
the i_version"). This commit uses direct referencing to f_path in
IMA code that otherwise uses file_inode() and file_dentry() to
reference the filesystem objects that it is measuring.
This contains work to switch things around: instead of having
filesystem code opt-in to get the "real" path, have generic code
opt-in for the "fake" path in the few places that it is needed.
Is it far more likely that new filesystems code that does not use
the file_dentry() and file_real_path() helpers will end up causing
crashes or averting LSM/audit rules if we keep the "fake" path
exposed by default.
This change already makes file_dentry() moot, but for now we did
not change this helper just added a WARN_ON() in ovl_d_real() to
catch if we have made any wrong assumptions.
After the dust settles on this change, we can make file_dentry() a
plain accessor and we can drop the inode argument to ->d_real().
- Switch struct file to SLAB_TYPESAFE_BY_RCU. This looks like a small
change but it really isn't and I would like to see everyone on
their tippie toes for any possible bugs from this work.
Essentially we've been doing most of what SLAB_TYPESAFE_BY_RCU for
files since a very long time because of the nasty interactions
between the SCM_RIGHTS file descriptor garbage collection. So
extending it makes a lot of sense but it is a subtle change. There
are almost no places that fiddle with file rcu semantics directly
and the ones that did mess around with struct file internal under
rcu have been made to stop doing that because it really was always
dodgy.
I forgot to put in the link tag for this change and the discussion
in the commit so adding it into the merge message:
https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Cleanups:
- Various smaller pipe cleanups including the removal of a spin lock
that was only used to protect against writes without pipe_lock()
from O_NOTIFICATION_PIPE aka watch queues. As that was never
implemented remove the additional locking from pipe_write().
- Annotate struct watch_filter with the new __counted_by attribute.
- Clarify do_unlinkat() cleanup so that it doesn't look like an extra
iput() is done that would cause issues.
- Simplify file cleanup when the file has never been opened.
- Use module helper instead of open-coding it.
- Predict error unlikely for stale retry.
- Use WRITE_ONCE() for mount expiry field instead of just commenting
that one hopes the compiler doesn't get smart.
Fixes:
- Fix readahead on block devices.
- Fix writeback when layztime is enabled and inodes whose timestamp
is the only thing that changed reside on wb->b_dirty_time. This
caused excessively large zombie memory cgroup when lazytime was
enabled as such inodes weren't handled fast enough.
- Convert BUG_ON() to WARN_ON_ONCE() in open_last_lookups()"
* tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
file, i915: fix file reference for mmap_singleton()
vfs: Convert BUG_ON to WARN_ON_ONCE in open_last_lookups
writeback, cgroup: switch inodes with dirty timestamps to release dying cgwbs
chardev: Simplify usage of try_module_get()
ovl: rely on SB_I_NOUMASK
fs: fix umask on NFS with CONFIG_FS_POSIX_ACL=n
fs: store real path instead of fake path in backing file f_path
fs: create helper file_user_path() for user displayed mapped file path
fs: get mnt_writers count for an open backing file's real path
vfs: stop counting on gcc not messing with mnt_expiry_mark if not asked
vfs: predict the error in retry_estale as unlikely
backing file: free directly
vfs: fix readahead(2) on block devices
io_uring: use files_lookup_fd_locked()
file: convert to SLAB_TYPESAFE_BY_RCU
vfs: shave work on failed file open
fs: simplify misleading code to remove ambiguity regarding ihold()/iput()
watch_queue: Annotate struct watch_filter with __counted_by
fs/pipe: use spinlock in pipe_read() only if there is a watch_queue
fs/pipe: remove unnecessary spinlock from pipe_write()
...
|
|
There are two possible mismatched alloc and free cases in BPF memory
allocator:
1) allocate from cache X but free by cache Y with a different unit_size
2) allocate from per-cpu cache but free by kmalloc cache or vice versa
So add more WARN_ON_ONCE checks in free_bulk() and __free_by_rcu() to
spot these mismatched alloc and free early.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231021014959.3563841-1-houtao@huaweicloud.com
|
|
This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is that BPF programs are executed within the drivers xmit routine
and therefore e.g. in case of containers/Pods moving BPF processing closer
to the source.
One of the goals was that in case of Pod egress traffic, this allows to
move BPF programs from hostns tcx ingress into the device itself, providing
earlier drop or forward mechanisms, for example, if the BPF program
determines that the skb must be sent out of the node, then a redirect to
the physical device can take place directly without going through per-CPU
backlog queue. This helps to shift processing for such traffic from softirq
to process context, leading to better scheduling decisions/performance (see
measurements in the slides).
In this initial version, the netkit device ships as a pair, but we plan to
extend this further so it can also operate in single device mode. The pair
comes with a primary and a peer device. Only the primary device, typically
residing in hostns, can manage BPF programs for itself and its peer. The
peer device is designated for containers/Pods and cannot attach/detach
BPF programs. Upon the device creation, the user can set the default policy
to 'pass' or 'drop' for the case when no BPF program is attached.
Additionally, the device can be operated in L3 (default) or L2 mode. The
management of BPF programs is done via bpf_mprog, so that multi-attach is
supported right from the beginning with similar API and dependency controls
as tcx. For details on the latter see commit 053c8e1f235d ("bpf: Add generic
attach/detach/query API for multi-progs"). tc BPF compatibility is provided,
so that existing programs can be easily migrated.
Going forward, we plan to use netkit devices in Cilium as the main device
type for connecting Pods. They will be operated in L3 mode in order to
simplify a Pod's neighbor management and the peer will operate in default
drop mode, so that no traffic is leaving between the time when a Pod is
brought up by the CNI plugin and programs attached by the agent.
Additionally, the programs we attach via tcx on the physical devices are
using bpf_redirect_peer() for inbound traffic into netkit device, hence the
latter is also supporting the ndo_get_peer_dev callback. Similarly, we use
bpf_redirect_neigh() for the way out, pushing from netkit peer to phys device
directly. Also, BIG TCP is supported on netkit device. For the follow-up
work in single device mode, we plan to convert Cilium's cilium_host/_net
devices into a single one.
An extensive test suite for checking device operations and the BPF program
and link management API comes as BPF selftests in this series.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://github.com/borkmann/iproute2/tree/pr/netkit
Link: http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf (24ff.)
Link: https://lore.kernel.org/r/20231024214904.29825-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
When determining if an if/else branch will always or never be taken, use
signed range knowledge in addition to currently used unsigned range knowledge.
If either signed or unsigned range suggests that condition is always/never
taken, return corresponding branch_taken verdict.
Current use of unsigned range for this seems arbitrary and unnecessarily
incomplete. It is possible for *signed* operations to be performed on
register, which could "invalidate" unsigned range for that register. In such
case branch_taken will be artificially useless, even if we can still tell
that some constant is outside of register value range based on its signed
bounds.
veristat-based validation shows zero differences across selftests, Cilium,
and Meta-internal BPF object files.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/bpf/20231022205743.72352-2-andrii@kernel.org
|
|
The bpf_user_ringbuf_drain() BPF_CALL function uses an atomic_set()
immediately preceded by smp_mb__before_atomic() so as to order storing
of ring-buffer consumer and producer positions prior to the atomic_set()
call's clearing of the ->busy flag, as follows:
smp_mb__before_atomic();
atomic_set(&rb->busy, 0);
Although this works given current architectures and implementations, and
given that this only needs to order prior writes against a later write.
However, it does so by accident because the smp_mb__before_atomic()
is only guaranteed to work with read-modify-write atomic operations, and
not at all with things like atomic_set() and atomic_read().
Note especially that smp_mb__before_atomic() will not, repeat *not*,
order the prior write to "a" before the subsequent non-read-modify-write
atomic read from "b", even on strongly ordered systems such as x86:
WRITE_ONCE(a, 1);
smp_mb__before_atomic();
r1 = atomic_read(&b);
Therefore, replace the smp_mb__before_atomic() and atomic_set() with
atomic_set_release() as follows:
atomic_set_release(&rb->busy, 0);
This is no slower (and sometimes is faster) than the original, and also
provides a formal guarantee of ordering that the original lacks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/ec86d38e-cfb4-44aa-8fdb-6c925922d93c@paulmck-laptop
|
|
htab_lock_bucket uses the following logic to avoid recursion:
1. preempt_disable();
2. check percpu counter htab->map_locked[hash] for recursion;
2.1. if map_lock[hash] is already taken, return -BUSY;
3. raw_spin_lock_irqsave();
However, if an IRQ hits between 2 and 3, BPF programs attached to the IRQ
logic will not able to access the same hash of the hashtab and get -EBUSY.
This -EBUSY is not really necessary. Fix it by disabling IRQ before
checking map_locked:
1. preempt_disable();
2. local_irq_save();
3. check percpu counter htab->map_locked[hash] for recursion;
3.1. if map_lock[hash] is already taken, return -BUSY;
4. raw_spin_lock().
Similarly, use raw_spin_unlock() and local_irq_restore() in
htab_unlock_bucket().
Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7a9576222aa40b1c84ad3a9ba3e64011d1a04d41.camel@linux.ibm.com
Link: https://lore.kernel.org/bpf/20231012055741.3375999-1-song@kernel.org
|
|
Additional logging in is_state_visited(): if infinite loop is detected
print full verifier state for both current and equivalent states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It turns out that .branches > 0 in is_state_visited() is not a
sufficient condition to identify if two verifier states form a loop
when iterators convergence is computed. This commit adds logic to
distinguish situations like below:
(I) initial (II) initial
| |
V V
.---------> hdr ..
| | |
| V V
| .------... .------..
| | | | |
| V V V V
| ... ... .-> hdr ..
| | | | | |
| V V | V V
| succ <- cur | succ <- cur
| | | |
| V | V
| ... | ...
| | | |
'----' '----'
For both (I) and (II) successor 'succ' of the current state 'cur' was
previously explored and has branches count at 0. However, loop entry
'hdr' corresponding to 'succ' might be a part of current DFS path.
If that is the case 'succ' and 'cur' are members of the same loop
and have to be compared exactly.
Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convergence for open coded iterators is computed in is_state_visited()
by examining states with branches count > 1 and using states_equal().
states_equal() computes sub-state relation using read and precision marks.
Read and precision marks are propagated from children states,
thus are not guaranteed to be complete inside a loop when branches
count > 1. This could be demonstrated using the following unsafe program:
1. r7 = -16
2. r6 = bpf_get_prandom_u32()
3. while (bpf_iter_num_next(&fp[-8])) {
4. if (r6 != 42) {
5. r7 = -32
6. r6 = bpf_get_prandom_u32()
7. continue
8. }
9. r0 = r10
10. r0 += r7
11. r8 = *(u64 *)(r0 + 0)
12. r6 = bpf_get_prandom_u32()
13. }
Here verifier would first visit path 1-3, create a checkpoint at 3
with r7=-16, continue to 4-7,3 with r7=-32.
Because instructions at 9-12 had not been visitied yet existing
checkpoint at 3 does not have read or precision mark for r7.
Thus states_equal() would return true and verifier would discard
current state, thus unsafe memory access at 11 would not be caught.
This commit fixes this loophole by introducing exact state comparisons
for iterator convergence logic:
- registers are compared using regs_exact() regardless of read or
precision marks;
- stack slots have to have identical type.
Unfortunately, this is too strict even for simple programs like below:
i = 0;
while(iter_next(&it))
i++;
At each iteration step i++ would produce a new distinct state and
eventually instruction processing limit would be reached.
To avoid such behavior speculatively forget (widen) range for
imprecise scalar registers, if those registers were not precise at the
end of the previous iteration and do not match exactly.
This a conservative heuristic that allows to verify wide range of
programs, however it precludes verification of programs that conjure
an imprecise value on the first loop iteration and use it as precise
on the second.
Test case iter_task_vma_for_each() presents one of such cases:
unsigned int seen = 0;
...
bpf_for_each(task_vma, vma, task, 0) {
if (seen >= 1000)
break;
...
seen++;
}
Here clang generates the following code:
<LBB0_4>:
24: r8 = r6 ; stash current value of
... body ... 'seen'
29: r1 = r10
30: r1 += -0x8
31: call bpf_iter_task_vma_next
32: r6 += 0x1 ; seen++;
33: if r0 == 0x0 goto +0x2 <LBB0_6> ; exit on next() == NULL
34: r7 += 0x10
35: if r8 < 0x3e7 goto -0xc <LBB0_4> ; loop on seen < 1000
<LBB0_6>:
... exit ...
Note that counter in r6 is copied to r8 and then incremented,
conditional jump is done using r8. Because of this precision mark for
r6 lags one state behind of precision mark on r8 and widening logic
kicks in.
Adding barrier_var(seen) after conditional is sufficient to force
clang use the same register for both counting and conditional jump.
This issue was discussed in the thread [1] which was started by
Andrew Werner <awerner32@gmail.com> demonstrating a similar bug
in callback functions handling. The callbacks would be addressed
in a followup patch.
[1] https://lore.kernel.org/bpf/97a90da09404c65c8e810cf83c94ac703705dc0e.camel@gmail.com/
Co-developed-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Co-developed-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extract same_callsites() from clean_live_states() as a utility function.
This function would be used by the next patch in the set.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Subsequent patches would make use of explored_state() function.
Move it up to avoid adding unnecessary prototype.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231024000917.12153-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Small clean up to get rid of the extra tcx_link_const() and only retain
the tcx_link().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231023185015.21152-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The following warning was reported when running "./test_progs -t
test_bpf_ma/percpu_free_through_map_free":
------------[ cut here ]------------
WARNING: CPU: 1 PID: 68 at kernel/bpf/memalloc.c:342
CPU: 1 PID: 68 Comm: kworker/u16:2 Not tainted 6.6.0-rc2+ #222
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:bpf_mem_refill+0x21c/0x2a0
......
Call Trace:
<IRQ>
? bpf_mem_refill+0x21c/0x2a0
irq_work_single+0x27/0x70
irq_work_run_list+0x2a/0x40
irq_work_run+0x18/0x40
__sysvec_irq_work+0x1c/0xc0
sysvec_irq_work+0x73/0x90
</IRQ>
<TASK>
asm_sysvec_irq_work+0x1b/0x20
RIP: 0010:unit_free+0x50/0x80
......
bpf_mem_free+0x46/0x60
__bpf_obj_drop_impl+0x40/0x90
bpf_obj_free_fields+0x17d/0x1a0
array_map_free+0x6b/0x170
bpf_map_free_deferred+0x54/0xa0
process_scheduled_works+0xba/0x370
worker_thread+0x16d/0x2e0
kthread+0x105/0x140
ret_from_fork+0x39/0x60
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
The reason is simple: __bpf_obj_drop_impl() does not know the freeing
field is a per-cpu pointer and it uses bpf_global_ma to free the
pointer. Because bpf_global_ma is not a per-cpu allocator, so ksize() is
used to select the corresponding cache. The bpf_mem_cache with 16-bytes
unit_size will always be selected to do the unmatched free and it will
trigger the warning in free_bulk() eventually.
Because per-cpu kptr doesn't support list or rb-tree now, so fix the
problem by only checking whether or not the type of kptr is per-cpu in
bpf_obj_free_fields(), and using bpf_global_percpu_ma to these kptrs.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
both syscall.c and helpers.c have the declaration of
__bpf_obj_drop_impl(), so just move it to a common header file.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For bpf_global_percpu_ma, the pointer passed to bpf_mem_free_rcu() is
allocated by kmalloc() and its size is fixed (16-bytes on x86-64). So
no matter which cache allocates the dynamic per-cpu area, on x86-64
cache[2] will always be used to free the per-cpu area.
Fix the unbalance by checking whether the bpf memory allocator is
per-cpu or not and use pcpu_alloc_size() instead of ksize() to
find the correct cache for per-cpu free.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With pcpu_alloc_size() in place, check whether or not the size of
the dynamic per-cpu area is matched with unit_size.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When using task_iter to iterate all threads of a specific task, we enforce
that the user must pass a valid task pointer to ensure safety. However,
when iterating all threads/process in the system, BPF verifier still
require a valid ptr instead of "nullable" pointer, even though it's
pointless, which is a kind of surprising from usability standpoint. It
would be nice if we could let that kfunc accept a explicit null pointer
when we are using BPF_TASK_ITER_ALL_{PROCS, THREADS} and a valid pointer
when using BPF_TASK_ITER_THREAD.
Given a trival kfunc:
__bpf_kfunc void FN(struct TYPE_A *obj);
BPF Prog would reject a nullptr for obj. The error info is:
"arg#x pointer type xx xx must point to scalar, or struct with scalar"
reported by get_kfunc_ptr_arg_type(). The reg->type is SCALAR_VALUE and
the btf type of ref_t is not scalar or scalar_struct which leads to the
rejection of get_kfunc_ptr_arg_type.
This patch add "__nullable" annotation:
__bpf_kfunc void FN(struct TYPE_A *obj__nullable);
Here __nullable indicates obj can be optional, user can pass a explicit
nullptr or a normal TYPE_A pointer. In get_kfunc_ptr_arg_type(), we will
detect whether the current arg is optional and register is null, If so,
return a new kfunc_ptr_arg_type KF_ARG_PTR_TO_NULL and skip to the next
arg in check_kfunc_args().
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-7-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
css_iter and task_iter should be used in rcu section. Specifically, in
sleepable progs explicit bpf_rcu_read_lock() is needed before use these
iters. In normal bpf progs that have implicit rcu_read_lock(), it's OK to
use them directly.
This patch adds a new a KF flag KF_RCU_PROTECTED for bpf_iter_task_new and
bpf_iter_css_new. It means the kfunc should be used in RCU CS. We check
whether we are in rcu cs before we want to invoke this kfunc. If the rcu
protection is guaranteed, we would let st->type = PTR_TO_STACK | MEM_RCU.
Once user do rcu_unlock during the iteration, state MEM_RCU of regs would
be cleared. is_iter_reg_valid_init() will reject if reg->type is UNTRUSTED.
It is worth noting that currently, bpf_rcu_read_unlock does not
clear the state of the STACK_ITER reg, since bpf_for_each_spilled_reg
only considers STACK_SPILL. This patch also let bpf_for_each_spilled_reg
search STACK_ITER.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-6-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This Patch adds kfuncs bpf_iter_css_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_css in open-coded iterator
style. These kfuncs actually wrapps css_next_descendant_{pre, post}.
css_iter can be used to:
1) iterating a sepcific cgroup tree with pre/post/up order
2) iterating cgroup_subsystem in BPF Prog, like
for_each_mem_cgroup_tree/cpuset_for_each_descendant_pre in kernel.
The API design is consistent with cgroup_iter. bpf_iter_css_new accepts
parameters defining iteration order and starting css. Here we also reuse
BPF_CGROUP_ITER_DESCENDANTS_PRE, BPF_CGROUP_ITER_DESCENDANTS_POST,
BPF_CGROUP_ITER_ANCESTORS_UP enums.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-5-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds kfuncs bpf_iter_task_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_task in open-coded iterator
style. BPF programs can use these kfuncs or through bpf_for_each macro to
iterate all processes in the system.
The API design keep consistent with SEC("iter/task"). bpf_iter_task_new()
accepts a specific task and iterating type which allows:
1. iterating all process in the system (BPF_TASK_ITER_ALL_PROCS)
2. iterating all threads in the system (BPF_TASK_ITER_ALL_THREADS)
3. iterating all threads of a specific task (BPF_TASK_ITER_PROC_THREADS)
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Link: https://lore.kernel.org/r/20231018061746.111364-4-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds kfuncs bpf_iter_css_task_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_css_task in open-coded
iterator style. These kfuncs actually wrapps css_task_iter_{start,next,
end}. BPF programs can use these kfuncs through bpf_for_each macro for
iteration of all tasks under a css.
css_task_iter_*() would try to get the global spin-lock *css_set_lock*, so
the bpf side has to be careful in where it allows to use this iter.
Currently we only allow it in bpf_lsm and bpf iter-s.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-3-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The whole network stack uses sockptr, and while it doesn't move to
something more modern, let's use sockptr in setsockptr BPF hooks, so, it
could be used by other callers.
The main motivation for this change is to use it in the io_uring
{g,s}etsockopt(), which will use a userspace pointer for *optval, but, a
kernel value for optlen.
Link: https://lore.kernel.org/all/ZSArfLaaGcfd8LH8@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The whole network stack uses sockptr, and while it doesn't move to
something more modern, let's use sockptr in getsockptr BPF hooks, so, it
could be used by other callers.
The main motivation for this change is to use it in the io_uring
{g,s}etsockopt(), which will use a userspace pointer for *optval, but, a
kernel value for optlen.
Link: https://lore.kernel.org/all/ZSArfLaaGcfd8LH8@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In recent discussions around some performance improvements in the file
handling area we discussed switching the file cache to rely on
SLAB_TYPESAFE_BY_RCU which allows us to get rid of call_rcu() based
freeing for files completely. This is a pretty sensitive change overall
but it might actually be worth doing.
The main downside is the subtlety. The other one is that we should
really wait for Jann's patch to land that enables KASAN to handle
SLAB_TYPESAFE_BY_RCU UAFs. Currently it doesn't but a patch for this
exists.
With SLAB_TYPESAFE_BY_RCU objects may be freed and reused multiple times
which requires a few changes. So it isn't sufficient anymore to just
acquire a reference to the file in question under rcu using
atomic_long_inc_not_zero() since the file might have already been
recycled and someone else might have bumped the reference.
In other words, callers might see reference count bumps from newer
users. For this reason it is necessary to verify that the pointer is the
same before and after the reference count increment. This pattern can be
seen in get_file_rcu() and __files_get_rcu().
In addition, it isn't possible to access or check fields in struct file
without first aqcuiring a reference on it. Not doing that was always
very dodgy and it was only usable for non-pointer data in struct file.
With SLAB_TYPESAFE_BY_RCU it is necessary that callers first acquire a
reference under rcu or they must hold the files_lock of the fdtable.
Failing to do either one of this is a bug.
Thanks to Jann for pointing out that we need to ensure memory ordering
between reallocations and pointer check by ensuring that all subsequent
loads have a dependency on the second load in get_file_rcu() and
providing a fixup that was folded into this patch.
Cc: Jann Horn <jannh@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-79-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When employed within a sleepable program not under RCU protection, the
use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log,
particularly when CONFIG_PROVE_RCU is enabled:
[ 1259.662357] WARNING: suspicious RCU usage
[ 1259.662358] 6.5.0+ #33 Not tainted
[ 1259.662360] -----------------------------
[ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage!
Other info that might help to debug this:
[ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1
[ 1259.662368] 1 lock held by trace/72954:
[ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0
Stack backtrace:
[ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33
[ 1259.662391] Call Trace:
[ 1259.662393] <TASK>
[ 1259.662395] dump_stack_lvl+0x6e/0x90
[ 1259.662401] dump_stack+0x10/0x20
[ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0
[ 1259.662412] task_css_set.part.0+0x23/0x30
[ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0
[ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93
[ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000
[ 1259.662439] bpf_lsm_bpf+0x5/0x20
[ 1259.662443] ? security_bpf+0x32/0x50
[ 1259.662452] __sys_bpf+0xe6/0xdd0
[ 1259.662463] __x64_sys_bpf+0x1a/0x30
[ 1259.662467] do_syscall_64+0x38/0x90
[ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 1259.662479] RIP: 0033:0x7f487baf8e29
[...]
[ 1259.662504] </TASK>
This issue can be reproduced by executing a straightforward program, as
demonstrated below:
SEC("lsm.s/bpf")
int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size)
{
struct cgroup *cgrp = NULL;
struct task_struct *task;
int ret = 0;
if (cmd != BPF_LINK_CREATE)
return 0;
// The cgroup2 should be mounted first
cgrp = bpf_cgroup_from_id(1);
if (!cgrp)
goto out;
task = bpf_get_current_task_btf();
if (bpf_task_under_cgroup(task, cgrp))
ret = -1;
bpf_cgroup_release(cgrp);
out:
return ret;
}
After running the program, if you subsequently execute another BPF program,
you will encounter the warning.
It's worth noting that task_under_cgroup_hierarchy() is also utilized by
bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup()
doesn't exhibit this issue because it cannot be used in sleepable BPF
programs.
Fixes: b5ad4cdc46c7 ("bpf: Add bpf_task_under_cgroup() kfunc")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Cc: Feng Zhou <zhoufeng.zf@bytedance.com>
Cc: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20231007135945.4306-1-laoar.shao@gmail.com
|
|
A few drivers were missing a xdp_do_flush() invocation after
XDP_REDIRECT.
Add three helper functions each for one of the per-CPU lists. Return
true if the per-CPU list is non-empty and flush the list.
Add xdp_do_check_flushed() which invokes each helper functions and
creates a warning if one of the functions had a non-empty list.
Hide everything behind CONFIG_DEBUG_NET.
Suggested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20231016125738.Yt79p1uF@linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
