summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-10-20xen/events: add a new "late EOI" evtchn frameworkJuergen Gross1-0/+21
In order to avoid tight event channel related IRQ loops add a new framework of "late EOI" handling: the IRQ the event channel is bound to will be masked until the event has been handled and the related driver is capable to handle another event. The driver is responsible for unmasking the event channel via the new function xen_irq_lateeoi(). This is similar to binding an event channel to a threaded IRQ, but without having to structure the driver accordingly. In order to support a future special handling in case a rogue guest is sending lots of unsolicited events, add a flag to xen_irq_lateeoi() which can be set by the caller to indicate the event was a spurious one. This is part of XSA-332. Cc: stable@vger.kernel.org Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Wei Liu <wl@xen.org>
2020-10-02Merge tag 'mmc-v5.9-rc4-3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - Fix deadlock when removing MEMSTICK host - Workaround broken CMDQ on Intel GLK based IRBIS models * tag 'mmc-v5.9-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS models memstick: Skip allocating card when removing host
2020-10-02mm: memcg/slab: fix slab statistics in !SMP configurationRoman Gushchin1-0/+5
Since commit ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat items") the write side of slab counters accepts a value in bytes and converts it to pages. It happens in __mod_node_page_state(). However a non-SMP version of __mod_node_page_state() doesn't perform this conversion. It leads to incorrect (unrealistically high) slab counters values. Fix this by adding a similar conversion to the non-SMP version of __mod_node_page_state(). Signed-off-by: Roman Gushchin <guro@fb.com> Reported-and-tested-by: Bastian Bittorf <bb@npl.de> Fixes: ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat items") Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-01pipe: remove pipe_wait() and fix wakeup race with spliceLinus Torvalds1-2/+3
The pipe splice code still used the old model of waiting for pipe IO by using a non-specific "pipe_wait()" that waited for any pipe event to happen, which depended on all pipe IO being entirely serialized by the pipe lock. So by checking the state you were waiting for, and then adding yourself to the wait queue before dropping the lock, you were guaranteed to see all the wakeups. Strictly speaking, the actual wakeups were not done under the lock, but the pipe_wait() model still worked, because since the waiter held the lock when checking whether it should sleep, it would always see the current state, and the wakeup was always done after updating the state. However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") split the single wait-queue into two, and in the process also made the "wait for event" code wait for _two_ wait queues, and that then showed a race with the wakers that were not serialized by the pipe lock. It's only splice that used that "pipe_wait()" model, so the problem wasn't obvious, but Josef Bacik reports: "I hit a hang with fstest btrfs/187, which does a btrfs send into /dev/null. This works by creating a pipe, the write side is given to the kernel to write into, and the read side is handed to a thread that splices into a file, in this case /dev/null. The box that was hung had the write side stuck here [pipe_write] and the read side stuck here [splice_from_pipe_next -> pipe_wait]. [ more details about pipe_wait() scenario ] The problem is we're doing the prepare_to_wait, which sets our state each time, however we can be woken up either with reads or writes. In the case above we race with the WRITER waking us up, and re-set our state to INTERRUPTIBLE, and thus never break out of schedule" Josef had a patch that avoided the issue in pipe_wait() by just making it set the state only once, but the deeper problem is that pipe_wait() depends on a level of synchonization by the pipe mutex that it really shouldn't. And the whole "wait for any pipe state change" model really isn't very good to begin with. So rather than trying to work around things in pipe_wait(), remove that legacy model of "wait for arbitrary pipe event" entirely, and actually create functions that wait for the pipe actually being readable or writable, and can do so without depending on the pipe lock serializing everything. Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/ Reported-by: Josef Bacik <josef@toxicpanda.com> Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-01Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "A previous commit to prevent AML memory opregions from accessing the kernel memory turned out to be too restrictive. Relax the permission check to permit the ACPI core to map kernel memory used for table overrides" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: permit ACPI core to map kernel memory used for table overrides
2020-09-30arm64: permit ACPI core to map kernel memory used for table overridesArd Biesheuvel1-1/+1
Jonathan reports that the strict policy for memory mapped by the ACPI core breaks the use case of passing ACPI table overrides via initramfs. This is due to the fact that the memory type used for loading the initramfs in memory is not recognized as a memory type that is typically used by firmware to pass firmware tables. Since the purpose of the strict policy is to ensure that no AML or other ACPI code can manipulate any memory that is used by the kernel to keep its internal state or the state of user tasks, we can relax the permission check, and allow mappings of memory that is reserved and marked as NOMAP via memblock, and therefore not covered by the linear mapping to begin with. Fixes: 1583052d111f ("arm64/acpi: disallow AML memory opregions to access kernel memory") Fixes: 325f5585ec36 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions") Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-09-28Merge tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds1-2/+2
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - NFSv4.2: copy_file_range needs to invalidate caches on success - NFSv4.2: Fix security label length not being reset - pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read - pNFS/flexfiles: Fix signed/unsigned type issues with mirror indices" * tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS/flexfiles: Be consistent about mirror index types pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read NFSv4.2: fix client's attribute cache management for copy_file_range nfs: Fix security label length not being reset
2020-09-28memstick: Skip allocating card when removing hostKai-Heng Feng1-0/+1
After commit 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management"), removing module rtsx_usb_ms will be stuck. The deadlock is caused by powering on and powering off at the same time, the former one is when memstick_check() is flushed, and the later is called by memstick_remove_host(). Soe let's skip allocating card to prevent this issue. Fixes: 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200925084952.13220-1-kai.heng.feng@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-27mm/fork: Pass new vma pointer into copy_page_range()Peter Xu1-1/+1
This prepares for the future work to trigger early cow on pinned pages during fork(). No functional change intended. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-27mm: Introduce mm_struct.has_pinnedPeter Xu1-0/+10
(Commit message majorly collected from Jason Gunthorpe) Reduce the chance of false positive from page_maybe_dma_pinned() by keeping track if the mm_struct has ever been used with pin_user_pages(). This allows cases that might drive up the page ref_count to avoid any penalty from handling dma_pinned pages. Future work is planned, to provide a more sophisticated solution, likely to turn it into a real counter. For now, make it atomic_t but use it as a boolean for simplicity. Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-26Merge tag 'scsi-fixes' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes: one in drivers (lpfc) and two for zoned block devices. The latter also impinges on the block layer but only to introduce a new block API for setting the zone model rather than fiddling with the queue directly in the zoned block driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: sd_zbc: Fix ZBC disk initialization scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported
2020-09-26Merge tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+1
Pull block fixes from Jens Axboe: "NVMe pull request from Christoph, and removal of a dead define. - fix error during controller probe that cause double free irqs (Keith Busch) - FC connection establishment fix (James Smart) - properly handle completions for invalid tags (Xianting Tian) - pass the correct nsid to the command effects and supported log (Chaitanya Kulkarni)" * tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block: block: remove unused BLK_QC_T_EAGAIN flag nvme-core: don't use NVME_NSID_ALL for command effects and supported log nvme-fc: fail new connections to a deleted host or remote port nvme-pci: fix NULL req in completion handler nvme: return errors for hwmon init
2020-09-26mm: don't rely on system state to detect hot-plug operationsLaurent Dufour1-4/+7
In register_mem_sect_under_node() the system_state's value is checked to detect whether the call is made during boot time or during an hot-plug operation. Unfortunately, that check against SYSTEM_BOOTING is wrong because regular memory is registered at SYSTEM_SCHEDULING state. In addition, memory hot-plug operation can be triggered at this system state by the ACPI [1]. So checking against the system state is not enough. The consequence is that on system with interleaved node's ranges like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] This can be seen on PowerPC LPAR after multiple memory hot-plug and hot-unplug operations are done. At the next reboot the node's memory ranges can be interleaved and since the call to link_mem_sections() is made in topology_init() while the system is in the SYSTEM_SCHEDULING state, the node's id is not checked, and the sections registered to multiple nodes: $ ls -l /sys/devices/system/memory/memory21/node* total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 In that case, the system is able to boot but if later one of theses memory blocks is hot-unplugged and then hot-plugged, the sysfs inconsistency is detected and this is triggering a BUG_ON(): kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This patch addresses the root cause by not relying on the system_state value to detect whether the call is due to a hot-plug operation. An extra parameter is added to link_mem_sections() detailing whether the operation is due to a hot-plug operation. [1] According to Oscar Salvador, using this qemu command line, ACPI memory hotplug operations are raised at SYSTEM_SCHEDULING state: $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \ -m size=$MEM,slots=255,maxmem=4294967296k \ -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \ -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \ -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \ -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \ -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \ -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \ -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \ -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \ Fixes: 4fbce633910e ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-26mm: replace memmap_context by meminit_contextLaurent Dufour2-4/+9
Patch series "mm: fix memory to node bad links in sysfs", v3. Sometimes, firmware may expose interleaved memory layout like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] In that case, we can see memory blocks assigned to multiple nodes in sysfs: $ ls -l /sys/devices/system/memory/memory21 total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 -rw-r--r-- 1 root root 65536 Aug 24 05:27 online -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index drwxr-xr-x 2 root root 0 Aug 24 05:27 power -r--r--r-- 1 root root 65536 Aug 24 05:27 removable -rw-r--r-- 1 root root 65536 Aug 24 05:27 state lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones The same applies in the node's directory with a memory21 link in both the node1 and node2's directory. This is wrong but doesn't prevent the system to run. However when later, one of these memory blocks is hot-unplugged and then hot-plugged, the system is detecting an inconsistency in the sysfs layout and a BUG_ON() is raised: kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This has been seen on PowerPC LPAR. The root cause of this issue is that when node's memory is registered, the range used can overlap another node's range, thus the memory block is registered to multiple nodes in sysfs. There are two issues here: (a) The sysfs memory and node's layouts are broken due to these multiple links (b) The link errors in link_mem_sections() should not lead to a system panic. To address (a) register_mem_sect_under_node should not rely on the system state to detect whether the link operation is triggered by a hot plug operation or not. This is addressed by the patches 1 and 2 of this series. Issue (b) will be addressed separately. This patch (of 2): The memmap_context enum is used to detect whether a memory operation is due to a hot-add operation or happening at boot time. Make it general to the hotplug operation and rename it as meminit_context. There is no functional change introduced by this patch Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-26mm/gup: fix gup_fast with dynamic page table foldingVasily Gorbik1-0/+10
Currently to make sure that every page table entry is read just once gup_fast walks perform READ_ONCE and pass pXd value down to the next gup_pXd_range function by value e.g.: static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) ... pudp = pud_offset(&p4d, addr); This function passes a reference on that local value copy to pXd_offset, and might get the very same pointer in return. This happens when the level is folded (on most arches), and that pointer should not be iterated. On s390 due to the fact that each task might have different 5,4 or 3-level address translation and hence different levels folded the logic is more complex and non-iteratable pointer to a local copy leads to severe problems. Here is an example of what happens with gup_fast on s390, for a task with 3-level paging, crossing a 2 GB pud boundary: // addr = 0x1007ffff000, end = 0x10080001000 static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) { unsigned long next; pud_t *pudp; // pud_offset returns &p4d itself (a pointer to a value on stack) pudp = pud_offset(&p4d, addr); do { // on second iteratation reading "random" stack value pud_t pud = READ_ONCE(*pudp); // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390 next = pud_addr_end(addr, end); ... } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack return 1; } This happens since s390 moved to common gup code with commit d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code"). s390 tried to mimic static level folding by changing pXd_offset primitives to always calculate top level page table offset in pgd_offset and just return the value passed when pXd_offset has to act as folded. What is crucial for gup_fast and what has been overlooked is that PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly. And the latter is not possible with dynamic folding. To fix the issue in addition to pXd values pass original pXdp pointers down to gup_pXd_range functions. And introduce pXd_offset_lockless helpers, which take an additional pXd entry value parameter. This has already been discussed in https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1 Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.2+] Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-25block: remove unused BLK_QC_T_EAGAIN flagJeffle Xu1-2/+1
commit 7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE") removed the REQ_NOWAIT_INLINE related code, but the diff wasn't applied to blk_types.h somehow. Then commit 2771cefeac49 ("block: remove the REQ_NOWAIT_INLINE flag") removed the REQ_NOWAIT_INLINE flag while the BLK_QC_T_EAGAIN flag still remains. Fixes: 7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE") Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24Merge tag 'media/v5.9-3' of ↵Linus Torvalds2-16/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - fix a regression at the CEC adapter core - two uAPI patches (one revert) for changes in this development cycle * tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: dt-bindings: media: imx274: Convert to json-schema media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag media: cec-adap.c: don't use flush_scheduled_work()
2020-09-22Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull vfs fixes from Al Viro: "No common topic, just assorted fixes" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse: fix the ->direct_IO() treatment of iov_iter fs: fix cast in fsparam_u32hex() macro vboxsf: Fix the check for the old binary mount-arguments struct
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds11-9/+21
Pull networking fixes from Jakub Kicinski: - fix failure to add bond interfaces to a bridge, the offload-handling code was too defensive there and recent refactoring unearthed that. Users complained (Ido) - fix unnecessarily reflecting ECN bits within TOS values / QoS marking in TCP ACK and reset packets (Wei) - fix a deadlock with bpf iterator. Hopefully we're in the clear on this front now... (Yonghong) - BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel) - fix AQL on mt76 devices with FW rate control and add a couple of AQL issues in mac80211 code (Felix) - fix authentication issue with mwifiex (Maximilian) - WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro) - fix exception handling for multipath routes via same device (David Ahern) - revert back to a BH spin lock flavor for nsid_lock: there are paths which do require the BH context protection (Taehee) - fix interrupt / queue / NAPI handling in the lantiq driver (Hauke) - fix ife module load deadlock (Cong) - make an adjustment to netlink reply message type for code added in this release (the sole change touching uAPI here) (Michal) - a number of fixes for small NXP and Microchip switches (Vladimir) [ Pull request acked by David: "you can expect more of this in the future as I try to delegate more things to Jakub" ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits) net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU net: Update MAINTAINERS for MediaTek switch driver net/mlx5e: mlx5e_fec_in_caps() returns a boolean net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock net/mlx5e: kTLS, Fix leak on resync error flow net/mlx5e: kTLS, Add missing dma_unmap in RX resync net/mlx5e: kTLS, Fix napi sync and possible use-after-free net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats() net/mlx5e: Fix multicast counter not up-to-date in "ip -s" net/mlx5e: Fix endianness when calculating pedit mask first bit net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported net/mlx5e: CT: Fix freeing ct_label mapping net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready net/mlx5e: Use synchronize_rcu to sync with NAPI net/mlx5e: Use RCU to protect rq->xdp_prog ...
2020-09-22Merge tag 'trace-v5.9-rc5' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Check kprobe is enabled before unregistering from ftrace as it isn't registered when disabled. - Remove kprobes enabled via command-line that is on init text when freed. - Add missing RCU synchronization for ftrace trampoline symbols removed from kallsyms. - Free trampoline on error path if ftrace_startup() fails. - Give more space for the longer PID numbers in trace output. - Fix a possible double free in the histogram code. - A couple of fixes that were discovered by sparse. * tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: init: make xbc_namebuf static kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot tracing: fix double free ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer tracing: Make the space reserved for the pid wider ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms ftrace: Free the trampoline when ftrace_startup() fails kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
2020-09-21dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAXJan Kara1-9/+8
dax_supported() is defined whenever CONFIG_DAX is enabled. So dummy implementation should be defined only in !CONFIG_DAX case, not in !CONFIG_FS_DAX case. Fixes: e2ec51282545 ("dm: Call proper helper to determine dax support") Cc: <stable@vger.kernel.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-20Merge tag 'locking_urgent_for_v5.9_rc6' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: "Two fixes from the locking/urgent pile: - Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter Zijlstra) - Make percpu-rwsem operations on the semaphore's ->read_count IRQ-safe because it can be used in an IRQ context (Hou Tao)" * tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count locking/lockdep: Fix "USED" <- "IN-NMI" inversions
2020-09-20Merge tag 'libnvdimm-fixes-5.9-rc6' of ↵Linus Torvalds1-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A handful of fixes to address a string of mistakes in the mechanism for device-mapper to determine if its component devices are dax capable. - Fix an original bug in device-mapper table reference counting when interrogating dax capability in the component device. This bug was hidden by the following bug. - Fix device-mapper to use the proper helper (dax_supported() instead of the leaf helper generic_fsdax_supported()) to determine dax operation of a stacked block device configuration. The original implementation is only valid for one level of dax-capable block device stacking. This bug was discovered while fixing the below regression. - Fix an infinite recursion regression introduced by broken attempts to quiet the generic_fsdax_supported() path and make it bail out before logging "dax capability not found" errors" * tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix stack overflow when mounting fsdax pmem device dm: Call proper helper to determine dax support dm/dax: Fix table reference counts
2020-09-20net: sctp: Fix IPv6 ancestor_size calc in sctp_copy_descendantHenry Ptasinski1-3/+5
When calculating ancestor_size with IPv6 enabled, simply using sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for alignment in the struct sctp6_sock. On x86, there aren't any extra bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte boundary so there were 4 pad bytes that were omitted from the ancestor_size calculation. This would lead to corruption of the pd_lobby pointers, causing an oops when trying to free the sctp structure on socket close. Fixes: 636d25d557d1 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant") Signed-off-by: Henry Ptasinski <hptasinski@google.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20Merge tag 'tty-5.9-rc6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial/fbcon fixes from Greg KH: "Here are some small tty/serial and one more fbcon fix. They include: - serial core locking regression fixes - new device ids for 8250_pci driver - fbcon fix for syzbot found issue All have been in linux-next with no reported issues" * tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fbcon: Fix user font detection test at fbcon_resize(). serial: 8250_pci: Add Realtek 816a and 816b serial: core: fix console port-lock regression serial: core: fix port-lock initialisation
2020-09-20dm: Call proper helper to determine dax supportJan Kara1-2/+20
DM was calling generic_fsdax_supported() to determine whether a device referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that they don't have to duplicate common generic checks. High level code should call dax_supported() helper which that calls into appropriate helper for the particular device. This problem manifested itself as kernel messages: dm-3: error: dax access failed (-95) when lvm2-testsuite run in cases where a DM device was stacked on top of another DM device. Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mike Snitzer <snitzer@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-19stackleak: let stack_erasing_sysctl take a kernel pointer bufferTobias Klauser1-1/+1
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of stack_erasing_sysctl to match ctl_table.proc_handler which fixes the following sparse warning: kernel/stackleak.c:31:50: warning: incorrect type in argument 3 (different address spaces) kernel/stackleak.c:31:50: expected void * kernel/stackleak.c:31:50: got void [noderef] __user *buffer Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093253.13656-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-19ftrace: let ftrace_enable_sysctl take a kernel pointer bufferTobias Klauser1-2/+1
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of ftrace_enable_sysctl to match ctl_table.proc_handler which fixes the following sparse warning: kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces) kernel/trace/ftrace.c:7544:43: expected void * kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-18net: mscc: ocelot: deinitialize only initialized portsVladimir Oltean1-0/+1
Currently mscc_ocelot_init_ports() will skip initializing a port when it doesn't have a phy-handle, so the ocelot->ports[port] pointer will be NULL. Take this into consideration when tearing down the driver, and add a new function ocelot_deinit_port() to the switch library, mirror of ocelot_init_port(), which needs to be called by the driver for all ports it has initialized. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mscc: ocelot: add locking for the port TX timestamp IDVladimir Oltean1-0/+1
The ocelot_port->ts_id is used to: (a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ with an skb. (b) populate the REW_OP from the injection header of the ongoing skb. Only then is ocelot_port->ts_id incremented. This is a problem because, at least theoretically, another timestampable skb might use the same ocelot_port->ts_id before that is incremented. Normally all transmit calls are serialized by the netdev transmit spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also called by DSA, which has started declaring the NETIF_F_LLTX feature since commit 2b86cb829976 ("net: dsa: declare lockless TX feature for slave ports"). So the logic of using and incrementing the timestamp id should be atomic per port. The solution is to use the global ocelot_port->ts_id only while protected by the associated ocelot_port->ts_id_lock. That's where we populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb is called for the actual skb, but for felix, it is called for the skb's clone. That is something which will also be changed in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Allow CPUs affected by erratum 1418040 to come online late (previously we only fixed the other case - CPUs not affected by the erratum coming up late). - Fix branch offset in BPF JIT. - Defer the stolen time initialisation to the CPU online time from the CPU starting time to avoid a (sleep-able) memory allocation in an atomic context. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: paravirt: Initialize steal time when cpu is online arm64: bpf: Fix branch offset in JIT arm64: Allow CPUs unffected by ARM erratum 1418040 to come in late
2020-09-18Merge tag 'pm-5.9-rc6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new CPU ID to the RAPL power capping driver and prevent the ACPI processor idle driver from triggering RCU-lockdep complaints. Specifics: - Add support for the Lakefield chip to the RAPL power capping driver (Ricardo Neri). - Modify the ACPI processor idle driver to prevent it from triggering RCU-lockdep complaints which has started to happen after recent changes in that area (Peter Zijlstra)" * tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: processor: Take over RCU-idle for C3-BM idle cpuidle: Allow cpuidle drivers to take over RCU-idle ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP powercap: RAPL: Add support for Lakefield
2020-09-18Merge tag 'sound-5.9-rc6' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here is a collection of fixes for 5.9. All look small and are nothing scary. The majority of changes are about ASoC driver- specific fixes, while there are a couple of ASoC core fixes (DAI lookup and lockdep stuff) and usual HD-audio quirks" * tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: hda/realtek - The Mic on a RedmiBook doesn't work ASoC: tlv320adcx140: Wake up codec before accessing register ASoC: core: Do not cleanup uninitialized dais on soc_pcm_open failure ALSA: hda: fixup headset for ASUS GX502 laptop ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN Converter9 2-in-1 ASoC: Intel: haswell: Fix power transition refactor ASoC: tlv320adcx140: Fix accessing uninitialized adcx140->dev ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functions ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811 ASoC: meson: axg-toddr: fix channel order on g12 platforms ASoC: soc-core: add snd_soc_find_dai_with_mutex() ASoC: qcom: common: Fix refcount imbalance on error ASoC: rt700: Fix return check for devm_regmap_init_sdw() ASoC: rt715: Fix return check for devm_regmap_init_sdw() ASoC: rt711: Fix return check for devm_regmap_init_sdw() ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw() ASoC: max98373: Fix return check for devm_regmap_init_sdw() ASoC: ti: fixup ams_delta_mute() function name ASoC: pcm3168a: ignore 0 Hz settings ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case ...
2020-09-18kprobes: tracing/kprobes: Fix to kill kprobes on initmem after bootMasami Hiramatsu1-0/+5
Since kprobe_event= cmdline option allows user to put kprobes on the functions in initmem, kprobe has to make such probes gone after boot. Currently the probes on the init functions in modules will be handled by module callback, but the kernel init text isn't handled. Without this, kprobes may access non-exist text area to disable or remove it. Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2 Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter") Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18ftrace: Let ftrace_enable_sysctl take a kernel pointer bufferTobias Klauser1-2/+1
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of ftrace_enable_sysctl to match ctl_table.proc_handler which fixes the following sparse warning: kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces) kernel/trace/ftrace.c:7544:43: expected void * kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18pNFS/flexfiles: Be consistent about mirror index typesTrond Myklebust1-2/+2
A mirror index is always of type u32. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-09-17ethtool: add and use message type for tunnel info replyMichal Kubecek1-0/+1
Tunnel offload info code uses ETHTOOL_MSG_TUNNEL_INFO_GET message type (cmd field in genetlink header) for replies to tunnel info netlink request, i.e. the same value as the request have. This is a problem because we are using two separate enums for userspace to kernel and kernel to userspace message types so that this ETHTOOL_MSG_TUNNEL_INFO_GET (28) collides with ETHTOOL_MSG_CABLE_TEST_TDR_NTF which is what message type 28 means for kernel to userspace messages. As the tunnel info request reached mainline in 5.9 merge window, we should still be able to fix the reply message type without breaking backward compatibility. Fixes: c7d759eb7b12 ("ethtool: add tunnel info interface") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17mm: allow a controlled amount of unfairness in the page lockLinus Torvalds2-0/+3
Commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") made the page locking entirely fair, in that if a waiter came in while the lock was held, the lock would be transferred to the lockers strictly in order. That was intended to finally get rid of the long-reported watchdog failures that involved the page lock under extreme load, where a process could end up waiting essentially forever, as other page lockers stole the lock from under it. It also improved some benchmarks, but it ended up causing huge performance regressions on others, simply because fair lock behavior doesn't end up giving out the lock as aggressively, causing better worst-case latency, but potentially much worse average latencies and throughput. Instead of reverting that change entirely, this introduces a controlled amount of unfairness, with a sysctl knob to tune it if somebody needs to. But the default value should hopefully be good for any normal load, allowing a few rounds of lock stealing, but enforcing the strict ordering before the lock has been stolen too many times. There is also a hint from Matthieu Baerts that the fair page coloring may end up exposing an ABBA deadlock that is hidden by the usual optimistic lock stealing, and while the unfairness doesn't fix the fundamental issue (and I'm still looking at that), it avoids it in practice. The amount of unfairness can be modified by writing a new value to the 'sysctl_page_lock_unfairness' variable (default value of 5, exposed through /proc/sys/vm/page_lock_unfairness), but that is hopefully something we'd use mainly for debugging rather than being necessary for any deep system tuning. This whole issue has exposed just how critical the page lock can be, and how contended it gets under certain locks. And the main contention doesn't really seem to be anything related to IO (which was the origin of this lock), but for things like just verifying that the page file mapping is stable while faulting in the page into a page table. Link: https://lore.kernel.org/linux-fsdevel/ed8442fd-6f54-dd84-cd4a-941e8b7ee603@MichaelLarabel.com/ Link: https://www.phoronix.com/scan.php?page=article&item=linux-50-59&num=1 Link: https://lore.kernel.org/linux-fsdevel/c560a38d-8313-51fb-b1ec-e904bd8836bc@tessares.net/ Reported-and-tested-by: Michael Larabel <Michael@michaellarabel.com> Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-17arm64: paravirt: Initialize steal time when cpu is onlineAndrew Jones1-1/+0
Steal time initialization requires mapping a memory region which invokes a memory allocation. Doing this at CPU starting time results in the following trace when CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at mm/slab.h:498 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0-rc5+ #1 Call trace: dump_backtrace+0x0/0x208 show_stack+0x1c/0x28 dump_stack+0xc4/0x11c ___might_sleep+0xf8/0x130 __might_sleep+0x58/0x90 slab_pre_alloc_hook.constprop.101+0xd0/0x118 kmem_cache_alloc_node_trace+0x84/0x270 __get_vm_area_node+0x88/0x210 get_vm_area_caller+0x38/0x40 __ioremap_caller+0x70/0xf8 ioremap_cache+0x78/0xb0 memremap+0x9c/0x1a8 init_stolen_time_cpu+0x54/0xf0 cpuhp_invoke_callback+0xa8/0x720 notify_cpu_starting+0xc8/0xd8 secondary_start_kernel+0x114/0x180 CPU1: Booted secondary processor 0x0000000001 [0x431f0a11] However we don't need to initialize steal time at CPU starting time. We can simply wait until CPU online time, just sacrificing a bit of accuracy by returning zero for steal time until we know better. While at it, add __init to the functions that are only called by pv_time_init() which is __init. Signed-off-by: Andrew Jones <drjones@redhat.com> Fixes: e0685fa228fd ("arm64: Retrieve stolen time as paravirtualized guest") Cc: stable@vger.kernel.org Reviewed-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20200916154530.40809-1-drjones@redhat.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-09-16fs: fix cast in fsparam_u32hex() macroAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-09-16cpuidle: Allow cpuidle drivers to take over RCU-idlePeter Zijlstra1-0/+1
Some drivers have to do significant work, some of which relies on RCU still being active. Instead of using RCU_NONIDLE in the drivers and flipping RCU back on, allow drivers to take over RCU-idle duty. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-16locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_countHou Tao1-4/+4
The __this_cpu*() accessors are (in general) IRQ-unsafe which, given that percpu-rwsem is a blocking primitive, should be just fine. However, file_end_write() is used from IRQ context and will cause load-store issues on architectures where the per-cpu accessors are not natively irq-safe. Fix it by using the IRQ-safe this_cpu_*() for operations on read_count. This will generate more expensive code on a number of platforms, which might cause a performance regression for some of the other percpu-rwsem users. If any such is reported, we can consider alternative solutions. Fixes: 70fe2f48152e ("aio: fix freeze protection of aio writes") Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lkml.kernel.org/r/20200915140750.137881-1-houtao1@huawei.com
2020-09-16serial: core: fix console port-lock regressionJohan Hovold1-0/+1
Fix the port-lock initialisation regression introduced by commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") by making sure that the lock is again initialised during console setup. The console may be registered before the serial controller has been probed in which case the port lock needs to be initialised during console setup by a call to uart_set_options(). The console-detach changes introduced a regression in several drivers by effectively removing that initialisation by not initialising the lock when the port is used as a console (which is always the case during console setup). Add back the early lock initialisation and instead use a new console-reinit flag to handle the case where a console is being re-attached through sysfs. The question whether the console-detach interface should have been added in the first place is left for another discussion. Note that the console-enabled check in uart_set_options() is not redundant because of kgdboc, which can end up reinitialising an already enabled console (see commit 42b6a1baa3ec ("serial_core: Don't re-initialize a previously initialized spinlock.")). Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable <stable@vger.kernel.org> # 5.7 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200909143101.15389-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-15scsi: sd: sd_zbc: Fix handling of host-aware ZBC disksDamien Le Moal1-0/+2
When CONFIG_BLK_DEV_ZONED is disabled, allow using host-aware ZBC disks as regular disks. In this case, ensure that command completion is correctly executed by changing sd_zbc_complete() to return good_bytes instead of 0 and causing a hang during device probe (endless retries). When CONFIG_BLK_DEV_ZONED is enabled and a host-aware disk is detected to have partitions, it will be used as a regular disk. In this case, make sure to not do anything in sd_zbc_revalidate_zones() as that triggers warnings. Since all these different cases result in subtle settings of the disk queue zoned model, introduce the block layer helper function blk_queue_set_zoned() to generically implement setting up the effective zoned model according to the disk type, the presence of partitions on the disk and CONFIG_BLK_DEV_ZONED configuration. Link: https://lore.kernel.org/r/20200915073347.832424-2-damien.lemoal@wdc.com Fixes: b72053072c0b ("block: allow partitions on host aware zone devices") Cc: <stable@vger.kernel.org> Reported-by: Borislav Petkov <bp@alien8.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-14net: sched: only keep the available bits when setting vxlan md->gbpXin Long1-0/+3
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can be set to or parse from the packet for vxlan gbp option. So we'd better do the mask when set it in act_tunnel_key and cls_flower. Otherwise, when users don't know these bits, they may configure with a value which can never be matched. Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14ipv4: Initialize flowi4_multipath_hash in data pathDavid Ahern1-0/+1
flowi4_multipath_hash was added by the commit referenced below for tunnels. Unfortunately, the patch did not initialize the new field for several fast path lookups that do not initialize the entire flow struct to 0. Fix those locations. Currently, flowi4_multipath_hash is random garbage and affects the hash value computed by fib_multipath_hash for multipath selection. Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash") Signed-off-by: David Ahern <dsahern@gmail.com> Cc: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flagSergey Senozhatsky2-16/+4
The patch partially reverts some of the UAPI bits of the buffer cache management hints. Namely, the queue consistency (memory coherency) user-space hint because, as it turned out, the kernel implementation of this feature was misusing DMA_ATTR_NON_CONSISTENT. The patch reverts both kernel and user space parts: removes the DMA consistency attr functions, rolls back changes to v4l2_requestbuffers, v4l2_create_buffers structures and corresponding UAPI functions (plus compat32 layer) and cleans up the documentation. [hverkuil: fixed a few typos in the commit log] [hverkuil: fixed vb2_core_reqbufs call in drivers/media/dvb-core/dvb_vb2.c] [mchehab: fixed a typo in the commit log: revers->reverts] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-13Merge tag 'driver-core-5.9-rc5' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core and debugfs fixes for 5.9-rc5 Included in here are: - firmware loader memory leak fix - firmware loader testing fixes for non-EFI systems - device link locking fixes found by lockdep - kobject_del() bugfix that has been affecting some callers - debugfs minor fix All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: test_firmware: Test platform fw loading on non-EFI systems PM: <linux/device.h>: fix @em_pd kernel-doc warning kobject: Drop unneeded conditional in __kobject_del() driver core: Fix device_pm_lock() locking for device links MAINTAINERS: Add the security document to SECURITY CONTACT driver code: print symbolic error code debugfs: Fix module state check condition kobject: Restore old behaviour of kobject_del(NULL) firmware_loader: fix memory leak for paged buffer
2020-09-13Merge tag 'char-misc-5.9-rc5' of ↵Linus Torvalds1-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are a number of small driver fixes for 5.9-rc5 Included in here are: - habanalabs driver fixes - interconnect driver fixes - soundwire driver fixes - dyndbg fixes for reported issues, and then reverts to fix it all up to a sane state. - phy driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "dyndbg: accept query terms like file=bar and module=foo" Revert "dyndbg: fix problem parsing format="foo bar"" scripts/tags.sh: exclude tools directory from tags generation video: fbdev: fix OOB read in vga_8planes_imageblit() dyndbg: fix problem parsing format="foo bar" dyndbg: refine export, rename to dynamic_debug_exec_queries() dyndbg: give %3u width in pr-format, cosmetic only interconnect: qcom: Fix small BW votes being truncated to zero soundwire: fix double free of dangling pointer interconnect: Show bandwidth for disabled paths as zero in debugfs habanalabs: fix report of RAZWI initiator coordinates habanalabs: prevent user buff overflow phy: omap-usb2-phy: disable PHY charger detect phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init soundwire: bus: fix typo in comment on INTSTAT registers phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe() phy: qualcomm: fix platform_no_drv_owner.cocci warnings
2020-09-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-7/+30
Pull kvm fixes from Paolo Bonzini: "A bit on the bigger side, mostly due to me being on vacation, then busy, then on parental leave, but there's nothing worrisome. ARM: - Multiple stolen time fixes, with a new capability to match x86 - Fix for hugetlbfs mappings when PUD and PMD are the same level - Fix for hugetlbfs mappings when PTE mappings are enforced (dirty logging, for example) - Fix tracing output of 64bit values x86: - nSVM state restore fixes - Async page fault fixes - Lots of small fixes everywhere" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) KVM: emulator: more strict rsm checks. KVM: nSVM: more strict SMM checks when returning to nested guest SVM: nSVM: setup nested msr permission bitmap on nested state load SVM: nSVM: correctly restore GIF on vmexit from nesting after migration x86/kvm: don't forget to ACK async PF IRQ x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit KVM: SVM: avoid emulation with stale next_rip KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN KVM: SVM: Periodically schedule when unregistering regions on destroy KVM: MIPS: Change the definition of kvm type kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control KVM: fix memory leak in kvm_io_bus_unregister_dev() KVM: Check the allocation of pv cpu mask KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected KVM: arm64: Update page shift if stage 2 block mapping not supported KVM: arm64: Fix address truncation in traces KVM: arm64: Do not try to map PUDs when they are folded into PMD arm64/x86: KVM: Introduce steal-time cap ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 18:32:07 +0000