summaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)AuthorFilesLines
2012-10-18Bluetooth: AMP: Get amp_mgr reference in HS hci_connAndrei Emeltchenko1-1/+1
When assigning amp_mgr in hci_conn (type AMP_LINK) get also reference. In hci_conn_del those references would be put for both conn types AMP_LINK and ACL_LINK associated with amp_mgr. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15Bluetooth: AMP: Handle complete frames in l2capAndrei Emeltchenko1-0/+1
Check flags type in switch statement and handle new frame type ACL_COMPLETE used for High Speed data over AMP. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15Bluetooth: Add chan->ops->defer()Gustavo Padovan1-0/+5
When DEFER_SETUP is set defer() will trigger an authorization request to the userspace. l2cap_chan_no_defer() is meant to be used when one does not want to support DEFER_SETUP (A2MP for example). Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-11Bluetooth: AMP: Hanlde AMP_LINK case in conn_putAndrei Emeltchenko1-3/+14
Handle AMP link when setting up disconnect timeout. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-11Bluetooth: AMP: Handle AMP_LINK connectionAndrei Emeltchenko1-0/+13
AMP_LINK represents physical link between AMP controllers. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-11Bluetooth: AMP: Add handle to hci_chan structureAndrei Emeltchenko1-1/+2
hci_chan will be identified by handle used in logical link creation process. This handle is used in AMP ACL-U packet handle field. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-11Bluetooth: AMP: Handle AMP_LINK timeoutAndrei Emeltchenko1-0/+2
When AMP_LINK timeouts execute HCI_OP_DISCONN_PHY_LINK as analog to HCI_OP_DISCONNECT for ACL_LINK. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-08Bluetooth: L2CAP: Fix using default Flush Timeout for EFSAndrei Emeltchenko1-1/+2
There are two Flush Timeouts: one is old Flush Timeot Option which is 2 octets and the second is Flush Timeout inside EFS which is 4 octets long. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-08Bluetooth: Adjust L2CAP Max PDU size for AMP packetsAndrei Emeltchenko1-1/+1
Maximum PDU size is defined by new BT Spec as 1492 octets. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Reviewed-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-08Bluetooth: AMP: Factor out phylink_addAndrei Emeltchenko1-1/+1
Add direction parameter to phylink_add since it is anyway set later. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-08Bluetooth: AMP: Factor out amp_ctrl_addAndrei Emeltchenko1-1/+1
Add ctrl_id parameter to amp_ctrl_add since we always set it after function ctrl is created. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-01Bluetooth: remove unused member of hci_dev.Rami Rosen1-2/+0
This patch removes core_data member from hci_dev struct as it is unused. Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27bluetooth: Remove unneeded batostr functionAndrei Emeltchenko1-1/+0
batostr is not needed anymore since for printing Bluetooth addresses we use %pMR specifier. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Handle Accept phylink command status evtAndrei Emeltchenko1-0/+1
When receiving HCI Command Status event for Accept Physical Link execute HCI Write Remote AMP Assoc with data saved from A2MP Create Physical Link Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Accept Physical LinkAndrei Emeltchenko1-0/+2
When receiving A2MP Create Physical Link message execute HCI Accept Physical Link command to AMP controller. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Process Chan Selected eventAndrei Emeltchenko3-0/+7
Channel Selected event indicates that link information data is available. Read it with Read Local AMP Assoc command. The data shall be sent in the A2MP Create Physical Link Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: A2MP: Add fallback to normal l2cap init sequenceAndrei Emeltchenko1-0/+1
When there is no remote AMP controller found fallback to normal L2CAP sequence. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Write remote AMP AssocAndrei Emeltchenko2-0/+4
When receiving HCI Command Status after HCI Create Physical Link execute HCI Write Remote AMP Assoc command to AMP controller. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Create Physical LinkAndrei Emeltchenko1-0/+2
When receiving A2MP Get AMP Assoc Response execute HCI Create Physical Link to AMP controller. Define function which will run when receiving HCI Command Status. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Add AMP key calculationAndrei Emeltchenko1-0/+2
Function calculates AMP keys using hmac_sha256 helper. Calculated keys are Generic AMP Link Key (gamp) and Dedicated AMP Link Key with keyID "802b" for 802.11 PAL. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Choose connection based on capabilitiesAndrei Emeltchenko2-0/+3
Choose which L2CAP connection to establish by checking support for HS and remote side supported features. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Remote AMP ctrl definitionsAndrei Emeltchenko2-0/+18
Create remote AMP controllers structure. It is used to keep information about discovered remote AMP controllers by A2MP protocol. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Physical link struct and helpersAndrei Emeltchenko3-0/+5
Define physical link structures. Physical links are represented by hci_conn structure. For BR/EDR we use type ACL_LINK and for AMP we use AMP_LINK. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Use HCI cmd to Read Loc AMP AssocAndrei Emeltchenko4-0/+33
When receiving A2MP Get AMP Assoc Request execute Read Local AMP Assoc HCI command to AMP controller. If the AMP Assoc data is larger than it can fit to HCI event only fragment is read. When all fragments are read send A2MP Get AMP Assoc Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Use HCI cmd to Read AMP InfoAndrei Emeltchenko1-0/+2
When receiving A2MP Get Info Request execute Read Local AMP Info HCI command to AMP controller with function to be executed upon receiving command complete event. Function will handle A2MP Get Info Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: A2MP: Create amp_mgr global listAndrei Emeltchenko1-0/+10
Create amp_mgr_list global list which will be used by different hci devices to find amp_mgr. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Add HCI logical link cmds definitionsAndrei Emeltchenko1-1/+35
Add a few definitions to hci.h Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-24Merge branch 'master' of ↵John W. Linville4-15/+51
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-09-24Merge branch 'for-john' of ↵John W. Linville1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-18Bluetooth: mgmt: Implement support for passkey notificationJohan Hedberg3-0/+30
This patch adds support for Secure Simple Pairing with devices that have KeyboardOnly as their IO capability. Such devices will cause a passkey notification on our side and optionally also keypress notifications. Without this patch some keyboards cannot be paired using the mgmt interface. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-10mac80211: add key flag for management keysJohannes Berg1-2/+10
Mark keys that might be used to receive management frames so drivers can fall back on software crypto for them if they don't support hardware offload. As the new flag is only set correctly for RX keys and the existing IEEE80211_KEY_FLAG_SW_MGMT flag can only affect TX, also rename the latter to IEEE80211_KEY_FLAG_SW_MGMT_TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-08Bluetooth: debug: Print refcnt for hci_devAndrei Emeltchenko1-0/+6
Add debug output for HCI kref. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-08Bluetooth: trivial: Make hci_chan_del return voidAndrei Emeltchenko1-1/+1
Return code is not needed in hci_chan_del Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-08Bluetooth: Remove unneeded zero initAndrei Emeltchenko1-9/+0
hdev is allocated with kzalloc so zero initialization is not needed. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-07Merge branch 'master' of ↵John W. Linville4-6/+44
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-09-07Merge branch 'for-john' of ↵John W. Linville1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-06Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg9-38/+50
2012-09-06Merge remote-tracking branch 'mac80211/master' into mac80211-nextJohannes Berg1-0/+2
Pull in mac80211.git to let the next patch apply without conflicts, also resolving a hwsim conflict. Conflicts: drivers/net/wireless/mac80211_hwsim.c Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05cfg80211: add kerneldoc entry for "vht_cap"Robert P. J. Day1-0/+1
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-27Bluetooth: Change signature of smp_conn_security()Vinicius Costa Gomes1-1/+1
To make it clear that it may be called from contexts that may not have any knowledge of L2CAP, we change the connection parameter, to receive a hci_conn. This also makes it clear that it is checking the security of the link. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-21Merge branch 'for-john' of ↵John W. Linville3-21/+117
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mac80211_hwsim.c
2012-08-21Bluetooth: Use kref for l2cap channel reference countingSyam Sidhardhan1-2/+1
This patch changes the struct l2cap_chan and associated code to use kref api for object refcounting and freeing. Suggested-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-21Bluetooth: mgmt: Add device disconnect reasonMikel Astiz2-1/+10
MGMT_EV_DEVICE_DISCONNECTED will now expose the disconnection reason to userland, distinguishing four possible values: 0x00 Reason not known or unspecified 0x01 Connection timeout 0x02 Connection terminated by local host 0x03 Connection terminated by remote host Note that the local/remote distinction just determines which side terminated the low-level connection, regardless of the disconnection of the higher-level profiles. This can sometimes be misleading and thus must be used with care. For example, some hardware combinations would report a locally initiated disconnection even if the user turned Bluetooth off in the remote side. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-21Bluetooth: Add more HCI error codesMikel Astiz1-0/+3
Add more HCI error codes as defined in the specification. Signed-off-by: Mikel Astiz <mikel.astiz@bmw-carit.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-20mac80211: add IEEE80211_HW_P2P_DEV_ADDR_FOR_INTFJohannes Berg1-0/+5
Some devices like the current iwlwifi implementation require that the P2P interface address match the P2P Device address (only one P2P interface is supported.) Add the HW flag IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF that allows drivers to request that P2P Interfaces added while a P2P Device is active get the same MAC address by default. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20cfg80211: add P2P Device abstractionJohannes Berg1-2/+38
In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: support A-MPDU status reportingJohannes Berg1-14/+39
Support getting A-MPDU status information from the drivers and reporting it to userspace via radiotap in the standard fields. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20wireless: add radiotap A-MPDU status fieldJohannes Berg1-0/+11
Define the A-MPDU status field in radiotap, also update the radiotap parser for it and the MCS field that was apparently missed last time. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: add supported rates change notification in IBSSAntonio Quartulli1-0/+4
In IBSS it is possible that the supported rates set for a station changes over time (e.g. it gets first initialised as an empty set because of no available information about rates and updated later). In this case the driver has to be notified about the change in order to update its internal table accordingly (if needed). This behaviour is needed by all those drivers that handle rc internally but leave stations management to mac80211 Reported-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> [Johannes - add docs, validate IBSS mode only, fix compilation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-15Bluetooth: Remove some functions from being exportedVinicius Costa Gomes1-2/+0
Some connection related functions are only used inside hci_conn.c so no need to have them exported. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 04:50:52 +0000