summaryrefslogtreecommitdiff
path: root/include/net/vxlan.h
AgeCommit message (Collapse)AuthorFilesLines
2022-03-01drivers: vxlan: vnifilter: per vni statsNikolay Aleksandrov1-0/+26
Add per-vni statistics for vni filter mode. Counting Rx/Tx bytes/packets/drops/errors at the appropriate places. This patch changes vxlan_vs_find_vni to also return the vxlan_vni_node in cases where the vni belongs to a vni filtering vxlan device Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-01vxlan: vni filtering support on collect metadata deviceRoopa Prabhu1-2/+26
This patch adds vnifiltering support to collect metadata device. Motivation: You can only use a single vxlan collect metadata device for a given vxlan udp port in the system today. The vxlan collect metadata device terminates all received vxlan packets. As shown in the below diagram, there are use-cases where you need to support multiple such vxlan devices in independent bridge domains. Each vxlan device must terminate the vni's it is configured for. Example usecase: In a service provider network a service provider typically supports multiple bridge domains with overlapping vlans. One bridge domain per customer. Vlans in each bridge domain are mapped to globally unique vxlan ranges assigned to each customer. vnifiltering support in collect metadata devices terminates only configured vnis. This is similar to vlan filtering in bridge driver. The vni filtering capability is provided by a new flag on collect metadata device. In the below pic: - customer1 is mapped to br1 bridge domain - customer2 is mapped to br2 bridge domain - customer1 vlan 10-11 is mapped to vni 1001-1002 - customer2 vlan 10-11 is mapped to vni 2001-2002 - br1 and br2 are vlan filtering bridges - vxlan1 and vxlan2 are collect metadata devices with vnifiltering enabled ┌──────────────────────────────────────────────────────────────────┐ │ switch │ │ │ │ ┌───────────┐ ┌───────────┐ │ │ │ │ │ │ │ │ │ br1 │ │ br2 │ │ │ └┬─────────┬┘ └──┬───────┬┘ │ │ vlans│ │ vlans │ │ │ │ 10,11│ │ 10,11│ │ │ │ │ vlanvnimap: │ vlanvnimap: │ │ │ 10-1001,11-1002 │ 10-2001,11-2002 │ │ │ │ │ │ │ │ ┌──────┴┐ ┌──┴─────────┐ ┌───┴────┐ │ │ │ │ swp1 │ │vxlan1 │ │ swp2 │ ┌┴─────────────┐ │ │ │ │ │ vnifilter:│ │ │ │vxlan2 │ │ │ └───┬───┘ │ 1001,1002│ └───┬────┘ │ vnifilter: │ │ │ │ └────────────┘ │ │ 2001,2002 │ │ │ │ │ └──────────────┘ │ │ │ │ │ └───────┼──────────────────────────────────┼───────────────────────┘ │ │ │ │ ┌─────┴───────┐ │ │ customer1 │ ┌─────┴──────┐ │ host/VM │ │customer2 │ └─────────────┘ │ host/VM │ └────────────┘ With this implementation, vxlan dst metadata device can be associated with range of vnis. struct vxlan_vni_node is introduced to represent a configured vni. We start with vni and its associated remote_ip in this structure. This structure can be extended to bring in other per vni attributes if there are usecases for it. A vni inherits an attribute from the base vxlan device if there is no per vni attributes defined. struct vxlan_dev gets a new rhashtable for vnis called vxlan_vni_group. vxlan_vnifilter.c implements the necessary netlink api, notifications and helper functions to process and manage lifecycle of vxlan_vni_node. This patch also adds new helper functions in vxlan_multicast.c to handle per vni remote_ip multicast groups which are part of vxlan_vni_group. Fix build problems: Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29net: vxlan: add macro definition for number of IANA VXLAN-GPE portHao Chen1-0/+1
Add macro definition for number of IANA VXLAN-GPE port for generic use. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: sched: only keep the available bits when setting vxlan md->gbpXin Long1-0/+3
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can be set to or parse from the packet for vxlan gbp option. So we'd better do the mask when set it in act_tunnel_key and cls_flower. Otherwise, when users don't know these bits, they may configure with a value which can never be matched. Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22vxlan: ecmp support for mac fdb entriesRoopa Prabhu1-0/+25
Todays vxlan mac fdb entries can point to multiple remote ips (rdsts) with the sole purpose of replicating broadcast-multicast and unknown unicast packets to those remote ips. E-VPN multihoming [1,2,3] requires bridged vxlan traffic to be load balanced to remote switches (vteps) belonging to the same multi-homed ethernet segment (E-VPN multihoming is analogous to multi-homed LAG implementations, but with the inter-switch peerlink replaced with a vxlan tunnel). In other words it needs support for mac ecmp. Furthermore, for faster convergence, E-VPN multihoming needs the ability to update fdb ecmp nexthops independent of the fdb entries. New route nexthop API is perfect for this usecase. This patch extends the vxlan fdb code to take a nexthop id pointing to an ecmp nexthop group. Changes include: - New NDA_NH_ID attribute for fdbs - Use the newly added fdb nexthop groups - makes vxlan rdsts and nexthop handling code mutually exclusive - since this is a new use-case and the requirement is for ecmp nexthop groups, the fdb add and update path checks that the nexthop is really an ecmp nexthop group. This check can be relaxed in the future, if we want to introduce replication fdb nexthop groups and allow its use in lieu of current rdst lists. - fdb update requests with nexthop id's only allowed for existing fdb's that have nexthop id's - learning will not override an existing fdb entry with nexthop group - I have wrapped the switchdev offload code around the presence of rdst [1] E-VPN RFC https://tools.ietf.org/html/rfc7432 [2] E-VPN with vxlan https://tools.ietf.org/html/rfc8365 [3] http://vger.kernel.org/lpc_net2018_talks/scaling_bridge_fdb_database_slidesV3.pdf Includes a null check fix in vxlan_xmit from Nikolay v2 - Fixed build issue: Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24vxlan: add adjacent link to limit depth levelTaehee Yoo1-0/+1
Current vxlan code doesn't limit the number of nested devices. Nested devices would be handled recursively and this routine needs huge stack memory. So, unlimited nested devices could make stack overflow. In order to fix this issue, this patch adds adjacent links. The adjacent link APIs internally check the depth level. Test commands: ip link add dummy0 type dummy ip link add vxlan0 type vxlan id 0 group 239.1.1.1 dev dummy0 \ dstport 4789 for i in {1..100} do let A=$i-1 ip link add vxlan$i type vxlan id $i group 239.1.1.1 \ dev vxlan$A dstport 4789 done ip link del dummy0 The top upper link is vxlan100 and the lowest link is vxlan0. When vxlan0 is deleting, the upper devices will be deleted recursively. It needs huge stack memory so it makes stack overflow. Splat looks like: [ 229.628477] ============================================================================= [ 229.629785] BUG page->ptl (Not tainted): Padding overwritten. 0x0000000026abf214-0x0000000091f6abb2 [ 229.629785] ----------------------------------------------------------------------------- [ 229.629785] [ 229.655439] ================================================================== [ 229.629785] INFO: Slab 0x00000000ff7cfda8 objects=19 used=19 fp=0x00000000fe33776c flags=0x200000000010200 [ 229.655688] BUG: KASAN: stack-out-of-bounds in unmap_single_vma+0x25a/0x2e0 [ 229.655688] Read of size 8 at addr ffff888113076928 by task vlan-network-in/2334 [ 229.655688] [ 229.629785] Padding 0000000026abf214: 00 80 14 0d 81 88 ff ff 68 91 81 14 81 88 ff ff ........h....... [ 229.629785] Padding 0000000001e24790: 38 91 81 14 81 88 ff ff 68 91 81 14 81 88 ff ff 8.......h....... [ 229.629785] Padding 00000000b39397c8: 33 30 62 a7 ff ff ff ff ff eb 60 22 10 f1 ff 1f 30b.......`".... [ 229.629785] Padding 00000000bc98f53a: 80 60 07 13 81 88 ff ff 00 80 14 0d 81 88 ff ff .`.............. [ 229.629785] Padding 000000002aa8123d: 68 91 81 14 81 88 ff ff f7 21 17 a7 ff ff ff ff h........!...... [ 229.629785] Padding 000000001c8c2369: 08 81 14 0d 81 88 ff ff 03 02 00 00 00 00 00 00 ................ [ 229.629785] Padding 000000004e290c5d: 21 90 a2 21 10 ed ff ff 00 00 00 00 00 fc ff df !..!............ [ 229.629785] Padding 000000000e25d731: 18 60 07 13 81 88 ff ff c0 8b 13 05 81 88 ff ff .`.............. [ 229.629785] Padding 000000007adc7ab3: b3 8a b5 41 00 00 00 00 ...A.... [ 229.629785] FIX page->ptl: Restoring 0x0000000026abf214-0x0000000091f6abb2=0x5a [ ... ] Fixes: acaf4e70997f ("net: vxlan: when lower dev unregisters remove vxlan dev as well") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05Convert usage of IN_MULTICAST to ipv4_is_multicastDave Taht1-2/+2
IN_MULTICAST's primary intent is as a uapi macro. Elsewhere in the kernel we use ipv4_is_multicast consistently. This patch unifies linux's multicast checks to use that function rather than this macro. Signed-off-by: Dave Taht <dave.taht@gmail.com> Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06vxlan: Use FDB_HASH_SIZE hash_locks to reduce contentionLitao jiao1-1/+1
The monolithic hash_lock could cause huge contention when inserting/deletiing vxlan_fdbs into the fdb_head. Use FDB_HASH_SIZE hash_locks to protect insertions/deletions of vxlan_fdbs into the fdb_head hash table. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Litao jiao <jiaolitao@raisecom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22net: Add IANA_VXLAN_UDP_PORT definition to vxlan header fileMoshe Shemesh1-0/+2
Added IANA_VXLAN_UDP_PORT (4789) definition to vxlan header file so it can be used by drivers instead of local definition. Updated drivers which locally defined it as 4789 to use it. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: John Hurley <john.hurley@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Yunsheng Lin <linyunsheng@huawei.com> Cc: Peng Li <lipeng321@huawei.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-26vxlan: add extack support for create and changelinkRoopa Prabhu1-0/+31
This patch adds extack coverage in vxlan link create and changelink paths. Introduces a new helper vxlan_nl2flags to consolidate flag attribute validation. thanks to Johannes Berg for some tips to construct the generic vxlan flag extack strings. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17vxlan: Add extack to switchdev operationsPetr Machata1-2/+4
There are four sources of VXLAN switchdev notifier calls: - the changelink() link operation, which already supports extack, - ndo_fdb_add() which got extack support in a previous patch, - FDB updates due to packet forwarding, - and vxlan_fdb_replay(). Extend vxlan_fdb_switchdev_call_notifiers() to include extack in the switchdev message that it sends, and propagate the argument upwards to the callers. For the first two cases, pass in the extack gotten through the operation. For case #3, pass in NULL. To cover the last case, extend vxlan_fdb_replay() to take extack argument, which might come from whatever operation necessitated the FDB replay. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07vxlan: Add vxlan_fdb_clear_offload()Petr Machata1-0/+6
When a driver unoffloads all FDB entries en bloc, it's inefficient to send the switchdev notification one by one. Add a helper that walks the FDB table, unsetting the offload flag on RDST with a given VNI. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07vxlan: Add vxlan_fdb_replay()Petr Machata1-0/+9
When a VXLAN device becomes relevant to a driver (such as when it is attached to an offloaded bridge), the driver will generally need to walk the existing FDB entries and offload them. Add a function vxlan_fdb_replay() to call a given notifier block for each FDB entry with a given VNI. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21vxlan: Mark user-added FDB entriesPetr Machata1-0/+1
The VXLAN driver needs to differentiate between FDB entries learned by the VXLAN driver, and those added by the user. The latter ones shouldn't be taken over by external learning events. This is in accordance with bridge behavior. Therefore, extend the flags bitfield to 16 bits and add a new private NTF flag to mark the user-added entries. This seems preferable to adding a dedicated boolean, because passing the flag, unlike passing e.g. a true, makes it clear what the meaning of the bit is. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08vxlan: Allow configuration of DF behaviourStefano Brivio1-0/+1
Allow users to set the IPv4 DF bit in outgoing packets, or to inherit its value from the IPv4 inner header. If the encapsulated protocol is IPv6 and DF is configured to be inherited, always set it. For IPv4, inheriting DF from the inner header was probably intended from the very beginning judging by the comment to vxlan_xmit(), but it wasn't actually implemented -- also because it would have done more harm than good, without handling for ICMP Fragmentation Needed messages. According to RFC 7348, "Path MTU discovery MAY be used". An expired RFC draft, draft-saum-nvo3-pmtud-over-vxlan-05, whose purpose was to describe PMTUD implementation, says that "is a MUST that Vxlan gateways [...] SHOULD set the DF-bit [...]", whatever that means. Given this background, the only sane option is probably to let the user decide, and keep the current behaviour as default. This only applies to non-lwt tunnels: if an external control plane is used, tunnel key will still control the DF flag. v2: - DF behaviour configuration only applies for non-lwt tunnels, move DF setting to if (!info) block in vxlan_xmit_one() (Stephen Hemminger) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17vxlan: Support marking RDSTs as offloadedPetr Machata1-0/+2
Offloaded bridge FDB entries are marked with NTF_OFFLOADED. Implement a similar mechanism for VXLAN, where a given remote destination can be marked as offloaded. To that end, introduce a new event, SWITCHDEV_VXLAN_FDB_OFFLOADED, through which the marking is communicated to the vxlan driver. To identify which RDST should be marked as offloaded, an switchdev_notifier_vxlan_fdb_info is passed to the listeners. The "offloaded" flag in that object determines whether the offloaded mark should be set or cleared. When sending offloaded FDB entries over netlink, mark them with NTF_OFFLOADED. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17vxlan: Add vxlan_fdb_find_uc() for FDB queryingPetr Machata1-0/+12
A switchdev-capable driver that is aware of VXLAN may need to query VXLAN FDB. In the particular case of mlxsw, this functionality is limited to querying UC FDBs. Those being easier to deal with than the general case of RDST chain traversal, introduce an interface to query specifically UC FDBs: vxlan_fdb_find_uc(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17vxlan: Add switchdev notificationsPetr Machata1-0/+11
When offloading VXLAN devices, drivers need to know about events in VXLAN FDB database. Since VXLAN models a bridge, it is natural to distribute the VXLAN FDB notifications using the pre-existing switchdev notification mechanism. To that end, introduce two new notification types: SWITCHDEV_VXLAN_FDB_ADD_TO_DEVICE and SWITCHDEV_VXLAN_FDB_DEL_TO_DEVICE. Introduce a new function, vxlan_fdb_switchdev_call_notifiers() to send the new notifier types, and a struct switchdev_notifier_vxlan_fdb_info to communicate the details of the FDB entry under consideration. Invoke the new function from vxlan_fdb_notify(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17net: Add netif_is_vxlan()Ido Schimmel1-0/+7
Add the ability to determine whether a netdev is a VxLAN netdev by calling the above mentioned function that checks the netdev's rtnl_link_ops. This will allow modules to identify netdev events involving a VxLAN netdev and act accordingly. For example, drivers capable of VxLAN offload will need to configure the underlying device when a VxLAN netdev is being enslaved to an offloaded bridge. Convert nfp to use the newly introduced helper. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17vxlan: Export address checking functionsIdo Schimmel1-0/+32
Drivers that support VxLAN offload need to be able to sanitize the configuration of the VxLAN device and accept / reject its offload. For example, mlxsw requires that the local IP of the VxLAN device be set and that packets be flooded to unicast IP(s) and not to a multicast group. Expose the functions that perform such checks. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13vxlan: Remove duplicated include from vxlan.hYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17vxlan: add ttl inherit supportHangbin Liu1-0/+1
Like tos inherit, ttl inherit should also means inherit the inner protocol's ttl values, which actually not implemented in vxlan yet. But we could not treat ttl == 0 as "use the inner TTL", because that would be used also when the "ttl" option is not specified and that would be a behavior change, and breaking real use cases. So add a different attribute IFLA_VXLAN_TTL_INHERIT when "ttl inherit" is specified with ip cmd. Reported-by: Jianlin Shi <jishi@redhat.com> Suggested-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17vxlan: Fix trailing semicolonLuis de Bethencourt1-1/+1
The trailing semicolon is an empty statement that does no operation. It is completely stripped out by the compiler. Removing it since it doesn't do anything. Fixes: 5f35227ea34b ("net: Generalize ndo_gso_check to ndo_features_check") Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03vxlan: trivial indenting fix.William Tu1-1/+1
Fix indentation of reserved_flags2 field in vxlanhdr_gpe. Fixes: e1e5314de08b ("vxlan: implement GPE") Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29vxlan: factor out VXLAN-GPE next protocolJiri Benc1-6/+0
The values are shared between VXLAN-GPE and NSH. Originally probably by coincidence but I notified both working groups about this last year and they seem to keep the values in sync since then. Hopefully they'll get a single IANA registry for the values, too. (I asked them for that.) Factor out the code to be shared by the NSH implementation. NSH and MPLS values are added in this patch, too. For MPLS, the drafts incorrectly assign only a single value, while we have two MPLS ethertypes. I raised the problem with both groups. For now, I assume the value is for unicast. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04net, vxlan: convert vxlan_sock.refcnt from atomic_t to refcount_tReshetova, Elena1-1/+1
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03vxlan: fix hlist corruptionJiri Benc1-1/+9
It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20vxlan: check valid combinations of address scopesMatthias Schiffer1-0/+2
* Multicast addresses are never valid as local address * Link-local IPv6 unicast addresses may only be used as remote when the local address is link-local as well * Don't allow link-local IPv6 local/remote addresses without interface We also store in the flags field if link-local addresses are used for the follow-up patches that actually make VXLAN over link-local IPv6 work. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20vxlan: get rid of redundant vxlan_dev.flagsMatthias Schiffer1-1/+0
There is no good reason to keep the flags twice in vxlan_dev and vxlan_config. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15vxlan: remove unsed vxlan_dev_dst_port()pravin shelar1-10/+0
Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29vxlan: avoid using stale vxlan socket.pravin shelar1-2/+2
When vxlan device is closed vxlan socket is freed. This operation can race with vxlan-xmit function which dereferences vxlan socket. Following patch uses RCU mechanism to avoid this situation. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net/ip_tunnels: Introduce tunnel_id_to_key32() and key32_to_tunnel_id()Amir Vadai1-18/+0
Add utility functions to convert a 32 bits key into a 64 bits tunnel and vice versa. These functions will be used instead of cloning code in GRE and VXLAN, and in tc act_iptunnel which will be introduced in a following patch in this patchset. Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: Remove deprecated tunnel specific UDP offload functionsAlexander Duyck1-5/+0
Now that we have all the drivers using udp_tunnel_get_rx_ports, ndo_add_udp_enc_rx_port, and ndo_del_udp_enc_rx_port we can drop the function calls that were specific to VXLAN and GENEVE. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: Merge VXLAN and GENEVE push notifiers into a single notifierAlexander Duyck1-2/+2
This patch merges the notifiers for VXLAN and GENEVE into a single UDP tunnel notifier. The idea is that we will want to only have to make one notifier call to receive the list of ports for VXLAN and GENEVE tunnels that need to be offloaded. In addition we add a new set of ndo functions named ndo_udp_tunnel_add and ndo_udp_tunnel_del that are meant to allow us to track the tunnel meta-data such as port and address family as tunnels are added and removed. The tunnel meta-data is now transported in a structure named udp_tunnel_info which for now carries the type, address family, and port number. In the future this could be updated so that we can include a tuple of values including things such as the destination IP address and other fields. I also ended up going with a naming scheme that consisted of using the prefix udp_tunnel on function names. I applied this to the notifier and ndo ops as well so that it hopefully points to the fact that these are primarily used in the udp_tunnel functions. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17vxlan/geneve: Include udp_tunnel.h in vxlan/geneve.h and fixup includesAlexander Duyck1-5/+1
This patch makes it so that we add udp_tunnel.h to vxlan.h and geneve.h header files. This is useful as I plan to move the generic handlers for the port offloads into the udp_tunnel header file and leave the vxlan and geneve headers to be a bit more protocol specific. I also went through and cleaned out a number of redundant includes that where in the .h and .c files for these drivers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+3
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03vxlan: Add checksum check to the features check functionAlexander Duyck1-1/+3
We need to perform an additional check on the inner headers to determine if we can offload the checksum for them. Previously this check didn't occur so we would generate an invalid frame in the case of an IPv6 header encapsulated inside of an IPv4 tunnel. To fix this I added a secondary check to vxlan_features_check so that we can verify that we can offload the inner checksum. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21vxlan: break dependency with netdev driversHannes Frederic Sowa1-4/+2
Currently all drivers depend and autoload the vxlan module because how vxlan_get_rx_port is linked into them. Remove this dependency: By using a new event type in the netdevice notifier call chain we proxy the request from the drivers to flush and resetup the vxlan ports not directly via function call but by the already existing netdevice notifier call chain. I added a separate new event type, NETDEV_OFFLOAD_PUSH_VXLAN, to do so. We don't need to save those ids, as the event type field is an unsigned long and using specialized event types for this purpose seemed to be a more elegant way. This also comes in beneficial if in future we want to add offloading knobs for vxlan. Cc: Jesse Gross <jesse@kernel.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-16vxlan: synchronously and race-free destruction of vxlan socketsHannes Frederic Sowa1-2/+0
Due to the fact that the udp socket is destructed asynchronously in a work queue, we have some nondeterministic behavior during shutdown of vxlan tunnels and creating new ones. Fix this by keeping the destruction process synchronous in regards to the user space process so IFF_UP can be reliably set. udp_tunnel_sock_release destroys vs->sock->sk if reference counter indicates so. We expect to have the same lifetime of vxlan_sock and vxlan_sock->sock->sk even in fast paths with only rcu locks held. So only destruct the whole socket after we can be sure it cannot be found by searching vxlan_net->sock_list. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07vxlan: change vxlan to use UDP socket GROTom Herbert1-1/+0
Adapt vxlan_gro_receive, vxlan_gro_complete to take a socket argument. Set these functions in tunnel_config. Don't set udp_offloads any more. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06vxlan: implement GPEJiri Benc1-0/+68
Implement VXLAN-GPE. Only COLLECT_METADATA is supported for now (it is possible to support static configuration, too, if there is demand for it). The GPE header parsing has to be moved before iptunnel_pull_header, as we need to know the protocol. v2: Removed what was called "L2 mode" in v1 of the patchset. Only "L3 mode" (now called "raw mode") is added by this patch. This mode does not allow Ethernet header to be encapsulated in VXLAN-GPE when using ip route to specify the encapsulation, IP header is encapsulated instead. The patch does support Ethernet to be encapsulated, though, using ETH_P_TEB in skb->protocol. This will be utilized by other COLLECT_METADATA users (openvswitch in particular). If there is ever demand for Ethernet encapsulation with VXLAN-GPE using ip route, it's easy to add a new flag switching the interface to "Ethernet mode" (called "L2 mode" in v1 of this patchset). For now, leave this out, it seems we don't need it. Disallowed more flag combinations, especially RCO with GPE. Added comment explaining that GBP and GPE cannot be set together. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21vxlan: fix sparse warningsJiri Benc1-8/+8
Sparse reports false positives for the header manipulation inlines. Annotate them correctly. Tested by sparse on a little endian and big endian machine. Fixes: 54bfd872bf16d ("vxlan: keep flags and vni in network byte order") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11vxlan: support setting IPv6 flow labelDaniel Borkmann1-0/+1
This work adds support for setting the IPv6 flow label for vxlan per device and through collect metadata (ip_tunnel_key) frontends. The vxlan dst cache does not need any special considerations here, for the cases where caches can be used, the label is static per cache. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21VXLAN: Support outer IPv4 Tx checksums by defaultAlexander Duyck1-1/+1
This change makes it so that if UDP CSUM is not specified we will default to enabling it. The main motivation behind this is the fact that with the use of outer checksum we can greatly improve the performance for VXLAN tunnels on devices that don't know how to parse tunnel headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18vxlan: tun_id is 64bit, not 32bitJiri Benc1-0/+9
The tun_id field in struct ip_tunnel_key is __be64, not __be32. We need to convert the vni to tun_id correctly. Fixes: 54bfd872bf16 ("vxlan: keep flags and vni in network byte order") Reported-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17vxlan: keep flags and vni in network byte orderJiri Benc1-11/+59
Prevent repeated conversions from and to network order in the fast path. To achieve this, define all flag constants in big endian order and store VNI as __be32. To prevent confusion between the actual VNI value and the VNI field from the header (which contains additional reserved byte), strictly distinguish between "vni" and "vni_field". Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17vxlan: introduce vxlan_hdrJiri Benc1-0/+5
Currently, pointer to the vxlan header is kept in a local variable. It has to be reloaded whenever the pskb pull operations are performed which usually happens somewhere deep in called functions. Create a vxlan_hdr function and use it to reference the vxlan header instead. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: use dst_cache for vxlan devicePaolo Abeni1-0/+1
In case of UDP traffic with datagram length below MTU this give about 3% performance increase when tunneling over ipv4 and about 70% when tunneling over ipv6. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-07vxlan: restructure vxlan.h definitionsJiri Benc1-41/+63
RCO and GBP are VXLAN extensions, not specified in RFC 7348. Because of that, they need to be explicitly enabled when creating vxlan interface. By default, those extensions are not used and plain VXLAN header is sent and received. Reflect this in vxlan.h: first, the plain VXLAN header is defined. Following it, RCO is documented and defined, and likewise for GBP. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 11:45:34 +0000