| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When multiple IRQ domains are created from the same device-tree node they
will get the same name based on the device-tree path. This will cause a
naming collision in debugFS when IRQ domain specific entries are created.
The regmap-IRQ creates per instance IRQ domains. This will lead to a
domain name conflict when a device which provides more than one
interrupt line uses the regmap-IRQ.
Add support for specifying an IRQ domain name suffix when creating a
regmap-IRQ controller.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/776bc4996969e5081bcf61b9bdb5517e537147a3.1723120028.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Guenter Roeck <linux@roeck-us.net>:
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers. It is helpful if multiple non-
sequential registers need to be read in a single operation which would
otherwise have to be mutex protected.
The name of the new function was chosen to match the existing function
regmap_multi_reg_write().
|
|
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240710015622.1960522-2-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The struct instances supplied by the drivers are never modified.
Handle them as const in the regmap core allowing the drivers to put them
into .rodata.
Also add a new entry to const_structs.checkpatch to make sure future
instances of this struct already enter the tree as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240706-regmap-const-structs-v1-2-d08c776da787@weissschuh.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On x86_64 and allmodconfig, this shrinks the size of 'struct regmap_config'
from 328 to 312 bytes.
This is usually a win, because this structure is used as a static global
variable.
When moving the kerneldoc fields, I've tried to keep the layout as
consistent as possible, which is not really easy!
Before:
/* size: 328, cachelines: 6, members: 55 */
/* sum members: 296, holes: 6, sum holes: 25 */
/* padding: 7 */
/* last cacheline: 8 bytes */
After:
/* size: 312, cachelines: 5, members: 55 */
/* sum members: 296, holes: 5, sum holes: 16 */
/* last cacheline: 56 bytes */
For the records, this is also widely used:
$git grep static.*regmap_config | wc -l
1327
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5e039cd8fe415dd7ab3169948c08a5311db9fb9a.1715024007.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a regmap_read_bypassed() to allow reads from the hardware registers
while the regmap is in cache-only mode.
A typical use for this is to keep the cache in cache-only mode until
the hardware has reached a valid state, but one or more status registers
must be polled to determine when this state is reached.
For example, firmware download on the cs35l56 can take several seconds if
there are multiple amps sharing limited bus bandwidth. This is too long
to block in probe() so it is done as a background task. The device must
be soft-reset to reboot the firmware and during this time the registers are
not accessible, so the cache should be in cache-only. But the driver must
poll a register to detect when reboot has completed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240408101803.43183-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When regmap consists of single register, 'regmap' subsystem is unable to
understand whether ->max_register is set or not, because in both cases it
is equal to zero. It leads to that the logic based on value of
->max_register doesn't work. For example using of REGCACHE_FLAT fails.
This patch introduces an extra parameter to regmap config, indicating
that zero value in ->max_register is authentic.
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Link: https://lore.kernel.org/r/20240126200836.1829995-1-jan.dakinevich@salutedevices.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HDA driver has a use case for checking if a register is cached which
it bodges in awkwardly and unclearly. Provide an API which allows it to
directly do what it's trying to do.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230717-regmap-cache-check-v1-1-73ef688afae3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No remaining users, use a custom .get_irq_reg() callback instead.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230511091342.26604-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
No remaining users, these have been replaced by config registers.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230511091342.26604-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
No remaining users, and it's been replaced by config registers.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230509110100.3980123-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
It refers to a non-existent "num_type_settings" value, which is
an old name I'd used during development of config registers and
later dropped because it wasn't very clear.
The correct bound for the range is num_config_regs, which can
be verified by checking the implementation.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com
Link: https://lore.kernel.org/r/20230509110100.3980123-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
Remove the map parameter from the struct regmap_irq_chip callback
handle_mask_sync() because it can be passed via the irq_drv_data
parameter instead. The gpio-104-dio-48e driver is the only consumer of
this callback and is thus updated accordingly.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com
Link: https://lore.kernel.org/r/1f44fb0fbcd3dccea3371215b00f1b9a956c1a12.1679323449.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
Similar to the existing reg_downshift mechanism, that is used to
translate register addresses on busses that have a smaller address
stride, it's also possible to want to upshift register addresses.
Such a case was encountered when network PHYs and PCS that usually sit
on a MDIO bus (16-bits register with a stride of 1) are integrated
directly as memory-mapped devices. Here, the same register layout
defined in 802.3 is used, but the register now have a larger stride.
Introduce a mechanism to also allow upshifting register addresses.
Re-purpose reg_downshift into a more generic, signed reg_shift, whose
sign indicates the direction of the shift. To avoid confusion, also
introduce macros to explicitly indicate if we want to downshift or
upshift.
For bisectability, change any use of reg_downshift to use reg_shift.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20230407152604.105467-1-maxime.chevallier@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from William Breathitt Gray <william.gray@linaro.org>:
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
A patch to pass irq_drv_data as a parameter for struct regmap_irq_chip
set_type_config() is included. This is needed by the
idio_24_set_type_config() and ws16c48_set_type_config() callbacks in
order to update the type configuration on their respective devices.
|
|
Allow the struct regmap_irq_chip set_type_config() callback to access
irq_drv_data by passing it as a parameter.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20e15cd3afae80922b7e0577c7741df86b3390c5.1680708357.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current state of the art for sparse register maps is the
rbtree cache. This works well for most applications but isn't
always ideal for sparser register maps since the rbtree can get
deep, requiring a lot of walking. Fortunately the kernel has a
data structure intended to address this very problem, the maple
tree. Provide an initial implementation of a register cache
based on the maple tree to start taking advantage of it.
The entries stored in the maple tree are arrays of register
values, with the maple tree keys holding the register addresses.
We store data in host native format rather than device native
format as we do for rbtree, this will be a benefit for devices
where we don't marshal data within regmap and simplifies the code
but will result in additional CPU overhead when syncing the cache
on devices where we do marshal data in regmap.
This should work well for a lot of devices, though there's some
additional areas that could be looked at such as caching the
last accessed entry like we do for rbtree and trying to minimise
the maple tree level locking. We should also use bulk writes
rather than single register writes when resyncing the cache where
possible, even if we don't store in device native format.
Very small register maps may continue to to better with rbtree
longer term.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-2-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The compressed register cache support has assumptions that make it hard to
cover in testing, mainly that it requires raw registers defaults be
provided. Rather than either address these assumptions or leave it untested
by the forthcoming KUnit tests let's remove it, the use case is quite thin
and there are no current users.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regcache-lzo-v1-1-08c5d63e2a5e@kernel.org
|
|
Merge series from William Breathitt Gray <william.gray@linaro.org>:
There are devices which have interrupt support with mask and ack
registers but no status register. Add a flag which lets us support
them, we just assume that all the interrupts fired.
|
|
It seems that a couple of members got lost theirorder, put them back.
Besides that, split field descriptions into groups in the same way
as it's done in the structure definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230220153334.87049-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices lack status registers, yet expect to handle interrupts.
Introduce a no_status flag to indicate such a configuration, where
rather than read a status register to verify, all interrupts received
are assumed to be active.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/bd501b4b5ff88da24d467f75e8c71b4e0e6f21e2.1677515341.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mask_invert is deprecated and no longer used; it can now be removed.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20230216223200.150679-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
type_invert is deprecated and no longer used; it can now be removed.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20230216223200.150679-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Group some bool variables to reduce hole and avoid padding.
On x86_64, this shrinks the size from 136 to 128 bytes.
As an example:
$ size drivers/base/regmap/regmap-fsi.o (Before)
text data bss dec hex filename
4837 136 0 4973 136d drivers/base/regmap/regmap-fsi.o
$ size drivers/base/regmap/regmap-fsi.o (After)
text data bss dec hex filename
4701 136 0 4837 12e5 drivers/base/regmap/regmap-fsi.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/077ca39622c8870a3ea932298a9cec34f7a8295a.1676363976.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MDIO subsystem is getting rid of MII_ADDR_C45 and thus also
encoding associated encoding of the C45 device address and register
address into one value. regmap-mdio also uses this encoding for the
C45 bus.
Move to the new C45 helpers for MDIO access and provide regmap-mdio
helper macros.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230116111509.4086236-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Provide a public callback handle_mask_sync() that drivers can use when
they have more complex IRQ masking logic. The default implementation is
regmap_irq_handle_mask_sync(), used if the chip doesn't provide its own
callback.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/e083474b3d467a86e6cb53da8072de4515bd6276.1669100542.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Eddie James <eajames@linux.ibm.com>:
The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.
This branch just has the regmap change so it can be shared with the FSI
code.
|
|
Add regmap support for the FSI bus.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20221102205148.1334459-2-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the dawn of MMIO gpio-regmap users, it is desirable to let
gpio-regmap ask the regmap if it might sleep during an access so
it can pass that information to gpiochip. Add a new regmap_might_sleep()
to query the regmap.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20221121150843.1562603-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several architectures have accelerated operations for MMIO
operations writing to a single register, such as writesb, writesw,
writesl, writesq, readsb, readsw, readsl and readsq but regmap
currently cannot use them because we have no hooks for providing
an accelerated noinc back-end for MMIO.
Solve this by providing reg_[read/write]_noinc callbacks for
the bus abstraction, so that the regmap-mmio bus can use this.
Currently I do not see a need to support this for custom regmaps
so it is only added to the bus.
Callbacks are passed a void * with the array of values and a
count which is the number of items of the byte chunk size for
the specific register width.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220816204832.265837-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some users may use regmap MMIO for IO ports, and this can be done
by assigning ioreadXX()/iowriteXX() and their Big Endian counterparts
to the regmap context.
Add IO port support with a corresponding flag added.
While doing that, make sure that user won't select relaxed MMIO access
along with IO port because the latter have no relaxed variants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20220808203401.35153-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This flag is a bit of a hack and the same thing can be accomplished
using a custom ->get_irq_reg() callback. Add a warning to catch any
use of the flag.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-13-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace the internal sub_irq_reg() function with a public callback
that drivers can use when they have more complex register layouts.
The default implementation is regmap_irq_get_irq_reg_linear(), used
if the chip doesn't provide its own callback.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-12-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To me "unmask" suggests that we write 1s to the register when
an interrupt is enabled. This also makes sense because it's the
opposite of what the "mask" register does (write 1s to disable
an interrupt).
But regmap-irq does the opposite: for a disabled interrupt, it
writes 1s to "unmask" and 0s to "mask". This is surprising and
deviates from the usual way mask registers are handled.
Additionally, mask_invert didn't interact with unmask registers
properly -- it caused them to be ignored entirely.
Fix this by making mask and unmask registers orthogonal, using
the following behavior:
* Mask registers are written with 1s for disabled interrupts.
* Unmask registers are written with 1s for enabled interrupts.
This behavior supports both normal or inverted mask registers
and separate set/clear registers via different combinations of
mask_base/unmask_base.
The old unmask register behavior is deprecated. Drivers need to
opt-in to the new behavior by setting mask_unmask_non_inverted.
Warnings are issued if the driver relies on deprecated behavior.
Chips that only set one of mask_base/unmask_base don't have to
use the mask_unmask_non_inverted flag because that use case was
previously not supported.
The mask_invert flag is also deprecated in favor of describing
inverted mask registers as unmask registers.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-11-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Config registers can be used to replace both type and virtual
registers, so mark both features are deprecated and issue a
warning if they're used.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-10-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Config registers provide a more uniform approach to handling irq type
registers. They are essentially an extension of the virtual registers
used by the qcom-pm8008 driver.
Config registers can be represented as a 2D array:
config_base[0] reg0,0 reg0,1 reg0,2 reg0,3
config_base[1] reg1,0 reg1,1 reg1,2 reg1,3
config_base[2] reg2,0 reg2,1 reg2,2 reg2,3
There are 'num_config_bases' base registers, each of which is used to
address 'num_config_regs' registers. The addresses are calculated in
the same way as for other bases. It is assumed that an irq's type is
controlled by one column of registers; that column is identified by
the irq's 'type_reg_offset'.
The set_type_config() callback is responsible for updating the config
register contents. It receives an array of buffers (each represents a
row of registers) and the index of the column to update, along with
the 'struct regmap_irq' description and requested irq type.
Buffered values are written to registers in regmap_irq_sync_unlock().
Note that the entire register contents are overwritten, which is a
minor change in behavior from type registers via 'type_base'.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-9-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit a71411dbf6c8 ("regmap: irq: add chip option mask_writeonly")
introduced the mask_writeonly option, but it isn't used now and it
appears it's never been used by any in-tree drivers. The motivation
for the option is mentioned in the commit message,
Some irq controllers have writeonly/multipurpose register
layouts. In those cases we read invalid data back. [...]
The option causes mask register updates to use regmap_write_bits()
instead of regmap_update_bits().
However, regmap_write_bits() doesn't solve the reading invalid data
problem. It's still a read-modify-write op like regmap_update_bits().
The difference is that 'update bits' will only write the new value
if it is different from the current value, while 'write bits' will
write the new value unconditionally, even if it's the same as the
current value.
This seems like a bit of a specialized use case and probably isn't
that useful for regmap-irq, so let's just remove the option and go
back to using an 'update bits' op for the mask registers. We can
always add the option back if some driver ends up needing it in the
future.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-7-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Check types_supported instead of checking type_rising/falling_val
when using type_in_mask interrupts. This makes the intent clearer
and allows a type_in_mask irq to support level or edge triggers,
rather than only edge triggers.
Update the documentation and comments to reflect the new behavior.
This shouldn't affect existing drivers, because if they didn't
set types_supported properly the type buffer wouldn't be updated.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-5-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It appears that no chip ever required a nonzero type_reg_stride
and commit 1066cfbdfa3f ("regmap-irq: Extend sub-irq to support
non-fixed reg strides") broke support. Just remove the field.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use 'unsigned int' for bitfields for consistency with most other
kernel code.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have set/clear/test operations for regmap, but not for regmap_field yet.
So let's introduce regmap_field helpers too.
In many instances regmap_field_update_bits() is used for simple bit setting
and clearing. In these cases the last argument is redundant and we can
hide it with a static inline function.
This adds three new helpers for simple bit operations: set_bits,
clear_bits and test_bits (the last one defined as a regular function).
Signed-off-by: Li Chen <lchen@ambarella.com>
Link: https://lore.kernel.org/r/180eef422c3.deae9cd960729.8518395646822099769@zohomail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the regmap_config structure only allows the user to implement
single element register read/write using .reg_read/.reg_write callbacks.
The regmap_bus already implements bulk counterparts of both, and is being
misused as a workaround for the missing bulk read/write callbacks in
regmap_config by a couple of drivers. To stop this misuse, add the bulk
read/write callbacks to regmap_config and call them from the regmap core
code.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20220430025145.640305-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There's an inconsistency that arises when a register set can be accessed
internally via MMIO, or externally via SPI. The VSC7514 chip allows both
modes of operation. When internally accessed, the system utilizes __iomem,
devm_ioremap_resource, and devm_regmap_init_mmio.
For SPI it isn't possible to utilize memory-mapped IO. To properly operate,
the resource base must be added to the register before every operation.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20220313224524.399947-3-colin.foster@in-advantage.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an additional reg_downshift to be applied to register addresses before
any register accesses. An example of a device that uses this is a VSC7514
chip, which require each register address to be downshifted by two if the
access is performed over a SPI bus.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20220313224524.399947-2-colin.foster@in-advantage.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some device requires a special handling for reg_update_bits and can't use
the normal regmap read write logic. An example is when locking is
handled by the device and rmw operations requires to do atomic operations.
Allow to declare a dedicated function in regmap_config for
reg_update_bits in no bus configuration.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20211104150040.1260-1-ansuelsmth@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Oltean <vladimir.oltean@nxp.com>:
The ls-extirq irqchip driver accesses regmap inside its implementation
of the struct irq_chip :: irq_set_type method, and currently regmap
only knows to lock using normal spinlocks. But the method above wants
raw spinlock context, so this isn't going to work and triggers a
"[ BUG: Invalid wait context ]" splat.
The best we can do given the arrangement of the code is to patch regmap
and the syscon driver: regmap to support raw spinlocks, and syscon to
request them on behalf of its ls-extirq consumer.
Link: https://lore.kernel.org/lkml/20210825135438.ubcuxm5vctt6ne2q@skbuf/T/#u
Vladimir Oltean (2):
regmap: teach regmap to use raw spinlocks if requested in the config
mfd: syscon: request a regmap with raw spinlocks for some devices
drivers/base/regmap/internal.h | 4 ++++
drivers/base/regmap/regmap.c | 35 +++++++++++++++++++++++++++++-----
drivers/mfd/syscon.c | 16 ++++++++++++++++
include/linux/regmap.h | 2 ++
4 files changed, 52 insertions(+), 5 deletions(-)
--
2.25.1
base-commit: 6efb943b8616ec53a5e444193dccf1af9ad627b5
|
|
Some drivers might access regmap in a context where a raw spinlock is
held. An example is drivers/irqchip/irq-ls-extirq.c, which calls
regmap_update_bits() from struct irq_chip :: irq_set_type, which is a
method called by __irq_set_trigger() under the desc->lock raw spin lock.
Since desc->lock is a raw spin lock and the regmap internal lock for
mmio is a plain spinlock (which can become sleepable on RT), this is an
invalid locking scheme and we get a splat stating that this is a
"[ BUG: Invalid wait context ]".
It seems reasonable for regmap to have an option use a raw spinlock too,
so add that in the config such that drivers can request it.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210825205041.927788-2-vladimir.oltean@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The reg_fields array fed to {devm_}regmap_field_bulk_alloc is currently
not const, which is not correct on semantics (the functions shouldn't
change reg_field contents) and prevents pre-defined const reg_field
array to be used.
As the implementation of this function doesn't change the content of it,
just add const to its prototype.
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Link: https://lore.kernel.org/r/20210802063741.76301-1-icenowy@sipeed.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some interrupt controllers have inverted status register:
cleared bits is active interrupts and set bits is inactive interrupts,
so add inverted status support to the framework.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20210525034204.5272-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<sander@svanheule.net>:
The RTL8231 GPIO and LED expander can be configured for use as an MDIO or SMI
bus device. Currently only the MDIO mode is supported, although SMI mode
support should be fairly straightforward, once an SMI bus driver is available.
Provided features by the RTL8231:
- Up to 37 GPIOs
- Configurable drive strength: 8mA or 4mA (currently unsupported)
- Input debouncing on high GPIOs (currently unsupported)
- Up to 88 LEDs in multiple scan matrix groups
- On, off, or one of six toggling intervals
- "single-color mode": 2×36 single color LEDs + 8 bi-color LEDs
- "bi-color mode": (12 + 2×6) bi-color LEDs + 24 single color LEDs
- Up to one PWM output (currently unsupported)
- Fixed duty cycle, 8 selectable frequencies (1.2kHz - 4.8kHz)
Register access is provided through a new MDIO regmap provider. The GPIO
controller uses gpio-regmap, although a patch is required to support a
limitation of the chip.
There remain some log warnings when probing the device, possibly due to the way
I'm using the MFD subsystem. Would it be possible to avoid these?
[ 2.602242] rtl8231-pinctrl: Failed to locate of_node [id: -2]
[ 2.609380] rtl8231-pinctrl rtl8231-pinctrl.0.auto: no of_node; not parsing pinctrl DT
When no 'leds' sub-node is specified:
[ 2.922262] rtl8231-leds: Failed to locate of_node [id: -2]
[ 2.967149] rtl8231-leds rtl8231-leds.1.auto: no of_node; not parsing pinctrl DT
[ 2.975673] rtl8231-leds rtl8231-leds.1.auto: scan mode missing or invalid
[ 2.983531] rtl8231-leds: probe of rtl8231-leds.1.auto failed with error -22
Changes since v1:
- Reintroduce MDIO regmap, with fixed Kconfig dependencies
- Add configurable dir/value order for gpio-regmap direction_out call
- Drop allocations for regmap fields that are used only on init
- Move some definitions to MFD header
- Add PM ops to replace driver remove for MFD
- Change pinctrl driver to (modified) gpio-regmap
- Change leds driver to use fwnode
Link: https://lore.kernel.org/lkml/cover.1620735871.git.sander@svanheule.net/
Changes since RFC:
- Dropped MDIO regmap interface. I was unable to resolve the Kconfig
dependency issue, so have reverted to using regmap_config.reg_read/write.
- Added pinctrl support
- Added LED support
- Changed root device to MFD, with pinctrl and leds child devices. Root
device is now an mdio_device driver.
Link: https://lore.kernel.org/linux-gpio/cover.1617914861.git.sander@svanheule.net/
Sander Vanheule (7):
regmap: Add MDIO bus support
gpio: regmap: Add configurable dir/value order
dt-bindings: leds: Binding for RTL8231 scan matrix
dt-bindings: mfd: Binding for RTL8231
mfd: Add RTL8231 core device
pinctrl: Add RTL8231 pin control and GPIO support
leds: Add support for RTL8231 LED scan matrix
.../bindings/leds/realtek,rtl8231-leds.yaml | 159 ++++++++
.../bindings/mfd/realtek,rtl8231.yaml | 202 ++++++++++
drivers/base/regmap/Kconfig | 6 +-
drivers/base/regmap/Makefile | 1 +
drivers/base/regmap/regmap-mdio.c | 57 +++
drivers/gpio/gpio-regmap.c | 20 +-
drivers/leds/Kconfig | 10 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-rtl8231.c | 293 ++++++++++++++
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/rtl8231.c | 153 +++++++
drivers/pinctrl/Kconfig | 11 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-rtl8231.c | 377 ++++++++++++++++++
include/linux/gpio/regmap.h | 3 +
include/linux/mfd/rtl8231.h | 57 +++
include/linux/regmap.h | 36 ++
18 files changed, 1393 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/realtek,rtl8231-leds.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl8231.yaml
create mode 100644 drivers/base/regmap/regmap-mdio.c
create mode 100644 drivers/leds/leds-rtl8231.c
create mode 100644 drivers/mfd/rtl8231.c
create mode 100644 drivers/pinctrl/pinctrl-rtl8231.c
create mode 100644 include/linux/mfd/rtl8231.h
base-commit: 6efb943b8616ec53a5e444193dccf1af9ad627b5
--
2.31.1
|
