| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add support for running the kernel in a SEV-SNP guest, over a Secure
VM Service Module (SVSM).
When running over a SVSM, different services can run at different
protection levels, apart from the guest OS but still within the
secure SNP environment. They can provide services to the guest, like
a vTPM, for example.
This series adds the required facilities to interface with such a
SVSM module.
- The usual fixlets, refactoring and cleanups
[ And as always: "SEV" is AMD's "Secure Encrypted Virtualization".
I can't be the only one who gets all the newer x86 TLA's confused,
can I?
- Linus ]
* tag 'x86_sev_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/ABI/configfs-tsm: Fix an unexpected indentation silly
x86/sev: Do RMP memory coverage check after max_pfn has been set
x86/sev: Move SEV compilation units
virt: sev-guest: Mark driver struct with __refdata to prevent section mismatch
x86/sev: Allow non-VMPL0 execution when an SVSM is present
x86/sev: Extend the config-fs attestation support for an SVSM
x86/sev: Take advantage of configfs visibility support in TSM
fs/configfs: Add a callback to determine attribute visibility
sev-guest: configfs-tsm: Allow the privlevel_floor attribute to be updated
virt: sev-guest: Choose the VMPCK key based on executing VMPL
x86/sev: Provide guest VMPL level to userspace
x86/sev: Provide SVSM discovery support
x86/sev: Use the SVSM to create a vCPU when not in VMPL0
x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0
x86/sev: Use kernel provided SVSM Calling Areas
x86/sev: Check for the presence of an SVSM in the SNP secrets page
x86/irqflags: Provide native versions of the local_irq_save()/restore()
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
"This contains some minor work for the iomap subsystem:
- Add documentation on the design of iomap and how to port to it
- Optimize iomap_read_folio()
- Bring back the change to iomap_write_end() to no increase i_size.
This is accompanied by a change to xfs to reserve blocks for
truncating large realtime inodes to avoid exposing stale data when
iomap_write_end() stops increasing i_size"
* tag 'vfs-6.11.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: don't increase i_size in iomap_write_end()
xfs: reserve blocks for truncating large realtime inode
Documentation: the design of iomap and how to port
iomap: Optimize iomap_read_folio
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
"This contains work to make it possible to derive namespace file
descriptors from pidfd file descriptors.
Right now it is already possible to use a pidfd with setns() to
atomically change multiple namespaces at the same time. In other
words, it is possible to switch to the namespace context of a process
using a pidfd. There is no need to first open namespace file
descriptors via procfs.
The work included here is an extension of these abilities by allowing
to open namespace file descriptors using a pidfd. This means it is now
possible to interact with namespaces without ever touching procfs.
To this end a new set of ioctls() on pidfds is introduced covering all
supported namespace types"
* tag 'vfs-6.11.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: allow retrieval of namespace file descriptors
nsfs: add open_namespace()
nsproxy: add helper to go from arbitrary namespace to ns_common
nsproxy: add a cleanup helper for nsproxy
file: add take_fd() cleanup helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace-fs updates from Christian Brauner:
"This adds ioctls allowing to translate PIDs between PID namespaces.
The motivating use-case comes from LXCFS which is a tiny fuse
filesystem used to virtualize various aspects of procfs. LXCFS is run
on the host. The files and directories it creates can be bind-mounted
by e.g. a container at startup and mounted over the various procfs
files the container wishes to have virtualized.
When e.g. a read request for uptime is received, LXCFS will receive
the pid of the reader. In order to virtualize the corresponding read,
LXCFS needs to know the pid of the init process of the reader's pid
namespace.
In order to do this, LXCFS first needs to fork() two helper processes.
The first helper process setns() to the readers pid namespace. The
second helper process is needed to create a process that is a proper
member of the pid namespace.
The second helper process then creates a ucred message with ucred.pid
set to 1 and sends it back to LXCFS. The kernel will translate the
ucred.pid field to the corresponding pid number in LXCFS's pid
namespace. This way LXCFS can learn the init pid number of the
reader's pid namespace and can go on to virtualize.
Since these two forks() are costly LXCFS maintains an init pid cache
that caches a given pid for a fixed amount of time. The cache is
pruned during new read requests. However, even with the cache the hit
of the two forks() is singificant when a very large number of
containers are running.
So this adds a simple set of ioctls that let's a caller translate PIDs
from and into a given PID namespace. This significantly improves
performance with a very simple change.
To protect against races pidfds can be used to check whether the
process is still valid"
* tag 'vfs-6.11.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsfs: add pid translation ioctls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount query updates from Christian Brauner:
"This contains work to extend the abilities of listmount() and
statmount() and various fixes and cleanups.
Features:
- Allow iterating through mounts via listmount() from newest to
oldest. This makes it possible for mount(8) to keep iterating the
mount table in reverse order so it gets newest mounts first.
- Relax permissions on listmount() and statmount().
It's not necessary to have capabilities in the initial namespace:
it is sufficient to have capabilities in the owning namespace of
the mount namespace we're located in to list unreachable mounts in
that namespace.
- Extend both listmount() and statmount() to list and stat mounts in
foreign mount namespaces.
Currently the only way to iterate over mount entries in mount
namespaces that aren't in the caller's mount namespace is by
crawling through /proc in order to find /proc/<pid>/mountinfo for
the relevant mount namespace.
This is both very clumsy and hugely inefficient. So extend struct
mnt_id_req with a new member that allows to specify the mount
namespace id of the mount namespace we want to look at.
Luckily internally we already have most of the infrastructure for
this so we just need to expose it to userspace. Give userspace a
way to retrieve the id of a mount namespace via statmount() and
through a new nsfs ioctl() on mount namespace file descriptor.
This comes with appropriate selftests.
- Expose mount options through statmount().
Currently if userspace wants to get mount options for a mount and
with statmount(), they still have to open /proc/<pid>/mountinfo to
parse mount options. Simply the information through statmount()
directly.
Afterwards it's possible to only rely on statmount() and
listmount() to retrieve all and more information than
/proc/<pid>/mountinfo provides.
This comes with appropriate selftests.
Fixes:
- Avoid copying to userspace under the namespace semaphore in
listmount.
Cleanups:
- Simplify the error handling in listmount by relying on our newly
added cleanup infrastructure.
- Refuse invalid mount ids early for both listmount and statmount"
* tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reject invalid last mount id early
fs: refuse mnt id requests with invalid ids early
fs: find rootfs mount of the mount namespace
fs: only copy to userspace on success in listmount()
sefltests: extend the statmount test for mount options
fs: use guard for namespace_sem in statmount()
fs: export mount options via statmount()
fs: rename show_mnt_opts -> show_vfsmnt_opts
selftests: add a test for the foreign mnt ns extensions
fs: add an ioctl to get the mnt ns id from nsfs
fs: Allow statmount() in foreign mount namespace
fs: Allow listmount() in foreign mount namespace
fs: export the mount ns id via statmount
fs: keep an index of current mount namespaces
fs: relax permissions for statmount()
listmount: allow listing in reverse order
fs: relax permissions for listmount()
fs: simplify error handling
fs: don't copy to userspace under namespace semaphore
path: add cleanup helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode / dentry updates from Christian Brauner:
"This contains smaller performance improvements to inodes and dentries:
inode:
- Add rcu based inode lookup variants.
They avoid one inode hash lock acquire in the common case thereby
significantly reducing contention. We already support RCU-based
operations but didn't take advantage of them during inode
insertion.
Callers of iget_locked() get the improvement without any code
changes. Callers that need a custom callback can switch to
iget5_locked_rcu() as e.g., did btrfs.
With 20 threads each walking a dedicated 1000 dirs * 1000 files
directory tree to stat(2) on a 32 core + 24GB ram vm:
before: 3.54s user 892.30s system 1966% cpu 45.549 total
after: 3.28s user 738.66s system 1955% cpu 37.932 total (-16.7%)
Long-term we should pick up the effort to introduce more
fine-grained locking and possibly improve on the currently used
hash implementation.
- Start zeroing i_state in inode_init_always() instead of doing it in
individual filesystems.
This allows us to remove an unneeded lock acquire in new_inode()
and not burden individual filesystems with this.
dcache:
- Move d_lockref out of the area used by RCU lookup to avoid
cacheline ping poing because the embedded name is sharing a
cacheline with d_lockref.
- Fix dentry size on 32bit with CONFIG_SMP=y so it does actually end
up with 128 bytes in total"
* tag 'vfs-6.11.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: fix dentry size
vfs: move d_lockref out of the area used by RCU lookup
bcachefs: remove now spurious i_state initialization
xfs: remove now spurious i_state initialization in xfs_inode_alloc
vfs: partially sanitize i_state zeroing on inode creation
xfs: preserve i_state around inode_init_always in xfs_reinit_inode
btrfs: use iget5_locked_rcu
vfs: add rcu-based find_inode variants for iget ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount API updates from Christian Brauner:
- Add a generic helper to parse uid and gid mount options.
Currently we open-code the same logic in various filesystems which is
error prone, especially since the verification of uid and gid mount
options is a sensitive operation in the face of idmappings.
Add a generic helper and convert all filesystems over to it. Make
sure that filesystems that are mountable in unprivileged containers
verify that the specified uid and gid can be represented in the
owning namespace of the filesystem.
- Convert hostfs to the new mount api.
* tag 'vfs-6.11.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: Convert to new uid/gid option parsing helpers
fuse: verify {g,u}id mount options correctly
fat: Convert to new uid/gid option parsing helpers
fat: Convert to new mount api
fat: move debug into fat_mount_options
vboxsf: Convert to new uid/gid option parsing helpers
tracefs: Convert to new uid/gid option parsing helpers
smb: client: Convert to new uid/gid option parsing helpers
tmpfs: Convert to new uid/gid option parsing helpers
ntfs3: Convert to new uid/gid option parsing helpers
isofs: Convert to new uid/gid option parsing helpers
hugetlbfs: Convert to new uid/gid option parsing helpers
ext4: Convert to new uid/gid option parsing helpers
exfat: Convert to new uid/gid option parsing helpers
efivarfs: Convert to new uid/gid option parsing helpers
debugfs: Convert to new uid/gid option parsing helpers
autofs: Convert to new uid/gid option parsing helpers
fs_parse: add uid & gid option option parsing helpers
hostfs: Add const qualifier to host_root in hostfs_fill_super()
hostfs: convert hostfs to use the new mount API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs casefolding updates from Christian Brauner:
"This contains some work to simplify the handling of casefolded names:
- Simplify the handling of casefolded names in f2fs and ext4 by
keeping the names as a qstr to avoiding unnecessary conversions
- Introduce a new generic_ci_match() libfs case-insensitive lookup
helper and use it in both f2fs and ext4 allowing to remove the
filesystem specific implementations
- Remove a bunch of ifdefs by making the unicode build checks part of
the code flow"
* tag 'vfs-6.11.casefold' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
f2fs: Move CONFIG_UNICODE defguards into the code flow
ext4: Move CONFIG_UNICODE defguards into the code flow
f2fs: Reuse generic_ci_match for ci comparisons
ext4: Reuse generic_ci_match for ci comparisons
libfs: Introduce case-insensitive string comparison helper
f2fs: Simplify the handling of cached casefolded names
ext4: Simplify the handling of cached casefolded names
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs module description updates from Christian Brauner:
"This contains patches to add module descriptions to all modules under
fs/ currently lacking them"
* tag 'vfs-6.11.module.description' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
openpromfs: add missing MODULE_DESCRIPTION() macro
fs: nls: add missing MODULE_DESCRIPTION() macros
fs: autofs: add MODULE_DESCRIPTION()
fs: fat: add missing MODULE_DESCRIPTION() macros
fs: binfmt: add missing MODULE_DESCRIPTION() macros
fs: cramfs: add MODULE_DESCRIPTION()
fs: hfs: add MODULE_DESCRIPTION()
fs: hpfs: add MODULE_DESCRIPTION()
qnx4: add MODULE_DESCRIPTION()
qnx6: add MODULE_DESCRIPTION()
fs: sysv: add MODULE_DESCRIPTION()
fs: efs: add MODULE_DESCRIPTION()
fs: minix: add MODULE_DESCRIPTION()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull PG_error removal updates from Christian Brauner:
"This contains work to remove almost all remaining users of PG_error
from filesystems and filesystem helper libraries. An additional patch
will be coming in via the jfs tree which tests the PG_error bit.
Afterwards nothing will be testing it anymore and it's safe to remove
all places which set or clear the PG_error bit.
The goal is to fully remove PG_error by the next merge window"
* tag 'vfs-6.11.pg_error' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
buffer: Remove calls to set and clear the folio error flag
iomap: Remove calls to set and clear folio error flag
vboxsf: Convert vboxsf_read_folio() to use a folio
ufs: Remove call to set the folio error flag
romfs: Convert romfs_read_folio() to use a folio
reiserfs: Remove call to folio_set_error()
orangefs: Remove calls to set/clear the error flag
nfs: Remove calls to folio_set_error
jffs2: Remove calls to set/clear the folio error flag
hostfs: Convert hostfs_read_folio() to use a folio
isofs: Convert rock_ridge_symlink_read_folio to use a folio
hpfs: Convert hpfs_symlink_read_folio to use a folio
efs: Convert efs_symlink_read_folio to use a folio
cramfs: Convert cramfs_read_folio to use a folio
coda: Convert coda_symlink_filler() to use folio_end_read()
befs: Convert befs_symlink_read_folio() to use folio_end_read()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Support passing NULL along AT_EMPTY_PATH for statx().
NULL paths with any flag value other than AT_EMPTY_PATH go the
usual route and end up with -EFAULT to retain compatibility (Rust
is abusing calls of the sort to detect availability of statx)
This avoids path lookup code, lockref management, memory allocation
and in case of NULL path userspace memory access (which can be
quite expensive with SMAP on x86_64)
- Don't block i_writecount during exec. Remove the
deny_write_access() mechanism for executables
- Relax open_by_handle_at() permissions in specific cases where we
can prove that the caller had sufficient privileges to open a file
- Switch timespec64 fields in struct inode to discrete integers
freeing up 4 bytes
Fixes:
- Fix false positive circular locking warning in hfsplus
- Initialize hfs_inode_info after hfs_alloc_inode() in hfs
- Avoid accidental overflows in vfs_fallocate()
- Don't interrupt fallocate with EINTR in tmpfs to avoid constantly
restarting shmem_fallocate()
- Add missing quote in comment in fs/readdir
Cleanups:
- Don't assign and test in an if statement in mqueue. Move the
assignment out of the if statement
- Reflow the logic in may_create_in_sticky()
- Remove the usage of the deprecated ida_simple_xx() API from procfs
- Reject FSCONFIG_CMD_CREATE_EXCL requets that depend on the new
mount api early
- Rename variables in copy_tree() to make it easier to understand
- Replace WARN(down_read_trylock, ...) abuse with proper asserts in
various places in the VFS
- Get rid of user_path_at_empty() and drop the empty argument from
getname_flags()
- Check for error while copying and no path in one branch in
getname_flags()
- Avoid redundant smp_mb() for THP handling in do_dentry_open()
- Rename parent_ino to d_parent_ino and make it use RCU
- Remove unused header include in fs/readdir
- Export in_group_capable() helper and switch f2fs and fuse over to
it instead of open-coding the logic in both places"
* tag 'vfs-6.11.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
ipc: mqueue: remove assignment from IS_ERR argument
vfs: rename parent_ino to d_parent_ino and make it use RCU
vfs: support statx(..., NULL, AT_EMPTY_PATH, ...)
stat: use vfs_empty_path() helper
fs: new helper vfs_empty_path()
fs: reflow may_create_in_sticky()
vfs: remove redundant smp_mb for thp handling in do_dentry_open
fuse: Use in_group_or_capable() helper
f2fs: Use in_group_or_capable() helper
fs: Export in_group_or_capable()
vfs: reorder checks in may_create_in_sticky
hfs: fix to initialize fields of hfs_inode_info after hfs_alloc_inode()
proc: Remove usage of the deprecated ida_simple_xx() API
hfsplus: fix to avoid false alarm of circular locking
Improve readability of copy_tree
vfs: shave a branch in getname_flags
vfs: retire user_path_at_empty and drop empty arg from getname_flags
vfs: stop using user_path_at_empty in do_readlinkat
tmpfs: don't interrupt fallocate with EINTR
fs: don't block i_writecount during exec
...
|
|
This is the last - for now - of the "look, we generated some
questionable code for basic pathname lookup operations" set of
branches.
This is mainly just re-organizing the name hashing code in
link_path_walk(), mostly by improving the calling conventions to
the inlined helper functions and moving some of the code around
to allow for more straightforward code generation.
The profiles - and the generated code - look much more palatable
to me now.
* link_path_walk:
vfs: link_path_walk: move more of the name hashing into hash_name()
vfs: link_path_walk: improve may_lookup() code generation
vfs: link_path_walk: do '.' and '..' detection while hashing
vfs: link_path_walk: clarify and improve name hashing interface
vfs: link_path_walk: simplify name hash flow
|
|
While Documentation/kbuild/kconfig-language.rst provides a brief
explanation, there are recurring confusions regarding the usage of a
prompt followed by 'if <expr>'. This conditional controls _only_ the
prompt.
A typical usage is as follows:
menuconfig BLOCK
bool "Enable the block layer" if EXPERT
default y
When EXPERT=n, the prompt is hidden, but this config entry is still
active, and BLOCK is set to its default value 'y'. This is reasonable
because you are likely want to enable the block device support. When
EXPERT=y, the prompt is shown, allowing you to toggle BLOCK.
Please note that it is different from 'depends on EXPERT', which would
enable and disable the entire config entry.
However, this conditional prompt has never worked in a choice block.
The following two work in the same way: when EXPERT is disabled, the
choice block is entirely disabled.
[Test Code 1]
choice
prompt "choose" if EXPERT
config A
bool "A"
config B
bool "B"
endchoice
[Test Code 2]
choice
prompt "choose"
depends on EXPERT
config A
bool "A"
config B
bool "B"
endchoice
I believe the first case should hide only the prompt, producing the
default:
CONFIG_A=y
# CONFIG_B is not set
The next commit will change (fix) the behavior of the conditional prompt
in choice blocks.
I see several choice blocks wrongly using a conditional prompt, where
'depends on' makes more sense.
To preserve the current behavior, this commit converts such misuses.
I did not touch the following entry in arch/x86/Kconfig:
choice
prompt "Memory split" if EXPERT
default VMSPLIT_3G
This is truly the correct use of the conditional prompt; when EXPERT=n,
this choice block should silently select the reasonable VMSPLIT_3G,
although the resulting PAGE_OFFSET will not be affected anyway.
Presumably, the one in fs/jffs2/Kconfig is also correct, but I converted
it to 'depends on' to avoid any potential behavioral change.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Merge runtime constants infrastructure with implementations for x86 and
arm64.
This is one of four branches that came out of me looking at profiles of
my kernel build filesystem load on my 128-core Altra arm64 system, where
pathname walking and the user copies (particularly strncpy_from_user()
for fetching the pathname from user space) is very hot.
This is a very specialized "instruction alternatives" model where the
dentry hash pointer and hash count will be constants for the lifetime of
the kernel, but the allocation are not static but done early during the
kernel boot. In order to avoid the pointer load and dynamic shift, we
just rewrite the constants in the instructions in place.
We can't use the "generic" alternative instructions infrastructure,
because different architectures do it very differently, and it's
actually simpler to just have very specific helpers, with a fallback to
the generic ("old") model of just using variables for architectures that
do not implement the runtime constant patching infrastructure.
Link: https://lore.kernel.org/all/CAHk-=widPe38fUNjUOmX11ByDckaeEo9tN4Eiyke9u1SAtu9sA@mail.gmail.com/
* runtime-constants:
arm64: add 'runtime constant' support
runtime constants: add x86 architecture support
runtime constants: add default dummy infrastructure
vfs: dcache: move hashlen_hash() from callers into d_hash()
|
|
When accessing a file with more entries than ES_MAX_ENTRY_NUM, the bh-array
is allocated in __exfat_get_entry_set. The problem is that the bh-array is
allocated with GFP_KERNEL. It does not make sense. In the following cases,
a deadlock for sbi->s_lock between the two processes may occur.
CPU0 CPU1
---- ----
kswapd
balance_pgdat
lock(fs_reclaim)
exfat_iterate
lock(&sbi->s_lock)
exfat_readdir
exfat_get_uniname_from_ext_entry
exfat_get_dentry_set
__exfat_get_dentry_set
kmalloc_array
...
lock(fs_reclaim)
...
evict
exfat_evict_inode
lock(&sbi->s_lock)
To fix this, let's allocate bh-array with GFP_NOFS.
Fixes: a3ff29a95fde ("exfat: support dynamic allocate bh for exfat_entry_set_cache")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: syzbot+412a392a2cd4a65e71db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000fef47e0618c0327f@google.com
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Pass the idmapped mount information to the different helper
functions. Adapt the uid/gid checks in exfat_setattr to use the
vfsuid/vfsgid helpers.
Based on the fat implementation in commit 4b7899368108
("fat: handle idmapped mounts") by Christian Brauner.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Launch ksmbd-durable-scavenger kernel thread to scan durable fps that
have not been reclaimed by a client within the configured time.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
memcpy's second parameter must not be NULL, even if size is zero.
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We no longer track individual btree node locks with lockdep, so this
will never be enabled.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The expired durable opens should not be reclaimed by client.
This patch add ->durable_scavenger_timeout to fp and check it in
ksmbd_lookup_durable_fd().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
'struct ksmbd_transport_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
52184 2085 256 54525 d4fd fs/smb/server/transport_rdma.o
After:
=====
text data bss dec hex filename
52260 2021 256 54537 d509 fs/smb/server/transport_rdma.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb/common already have SMB2 Oplock levels definitions, remove duplicate
definitions in server.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
perusal of /sys/kernel/debug/bcachefs/*/btree_transaction_stats shows
that the read path has been acculumalating unneeded paths on the reflink
btree, which we don't want.
The solution is to call bch2_trans_begin(), which drops paths not used
on previous loop iteration.
bch2_readahead:
Max mem used: 0
Transaction duration:
count: 194235
since mount recent
duration of events
min: 150 ns
max: 9 ms
total: 838 ms
mean: 4 us 6 us
stddev: 34 us 7 us
time between events
min: 10 ns
max: 15 h
mean: 2 s 12 s
stddev: 2 s 3 ms
Maximum allocated btree paths (193):
path: idx 2 ref 0:0 P btree=extents l=0 pos 270943112:392:U32_MAX locks 0
path: idx 3 ref 1:0 S btree=extents l=0 pos 270943112:24578:U32_MAX locks 1
path: idx 4 ref 0:0 P btree=reflink l=0 pos 0:24773509:0 locks 0
path: idx 5 ref 0:0 P S btree=reflink l=0 pos 0:24773631:0 locks 1
path: idx 6 ref 0:0 P S btree=reflink l=0 pos 0:24773759:0 locks 1
path: idx 7 ref 0:0 P S btree=reflink l=0 pos 0:24773887:0 locks 1
path: idx 8 ref 0:0 P S btree=reflink l=0 pos 0:24774015:0 locks 1
path: idx 9 ref 0:0 P S btree=reflink l=0 pos 0:24774143:0 locks 1
path: idx 10 ref 0:0 P S btree=reflink l=0 pos 0:24774271:0 locks 1
<many more reflink paths>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If label is not set, the Label tag in superblock info show '(none)'.
```
[Before]
Device index: 0
Label:
Version: 1.4: member_seq
[After]
Device index: 0
Label: (none)
Version: 1.4: member_seq
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Unnecessary here, and this broke the rust bindings:
error[E0588]: packed type cannot transitively contain a `#[repr(align)]` type
--> /build/source/target/release/build/bch_bindgen-9445b24c90aca2a3/out/bcachefs.rs:29025:1
|
29025 | pub struct bkey_i_inode_v3 {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: `bch_inode_v3` has a `#[repr(align)]` attribute
--> /build/source/target/release/build/bch_bindgen-9445b24c90aca2a3/out/bcachefs.rs:8949:1
|
8949 | pub struct bch_inode_v3 {
| ^^^^^^^^^^^^^^^^^^^^^^^
error[E0588]: packed type cannot transitively contain a `#[repr(align)]` type
--> /build/source/target/release/build/bch_bindgen-9445b24c90aca2a3/out/bcachefs.rs:32826:1
|
32826 | pub struct bkey_inode_buf {
| ^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: `bch_inode_v3` has a `#[repr(align)]` attribute
--> /build/source/target/release/build/bch_bindgen-9445b24c90aca2a3/out/bcachefs.rs:8949:1
|
8949 | pub struct bch_inode_v3 {
| ^^^^^^^^^^^^^^^^^^^^^^^
note: `bkey_inode_buf` contains a field of type `bkey_i_inode_v3`
--> /build/source/target/release/build/bch_bindgen-9445b24c90aca2a3/out/bcachefs.rs:32827:9
|
32827 | pub inode: bkey_i_inode_v3,
| ^^^^^
note: ...which contains a field of type `bch_inode_v3`
--> /build/source/target/release/build/bch_bindgen-9445b24c90aca2a3/out/bcachefs.rs:29027:9
|
29027 | pub v: bch_inode_v3,
| ^
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
highly damaged filesystems, or filesystems that have been damaged and
repair and damaged again, may have sequence numbers we can't fully trust
- which in itself is something we need to debug.
Add a journal_seq fallback so that repair doesn't get stuck.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds lockdep tracking for held btree locks with a single dep_map in
btree_trans, i.e. tracking all held btree locks as one object.
This is more practical and more useful than having lockdep track held
btree locks individually, because
- we can take more locks than lockdep can track (unbounded, now that we
have dynamically resizable btree paths)
- there's no lock ordering between btree locks for lockdep to track (we
do cycle detection)
- and this makes it easy to teach lockdep that btree locks are not safe
to hold while invoking memory reclaim.
The last rule is one that lockdep would never learn, because we only do
trylock() from within shrinkers - but we very much do not want to be
invoking memory reclaim while holding btree node locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new helper to disable lockdep tracking entirely for a given class.
This is needed for bcachefs, which takes too many btree node locks for
lockdep to track. Instead, we have a single lockdep_map for "btree_trans
has any btree nodes locked", which makes more since given that we have
centralized lock management and a cycle detector.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
printing the raw values can occasionally be very useful
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Eliminate possible integer truncation bugs on 32 bit
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're not always mounting when we start the filesystem
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This repurposes the promote path, which already knows how to call
data_update() after a read: we now automatically rewrite bad data when
we get a read error and then successfully retry from a different
replica.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
fsck passes read_only as a mount option, and it's required for
nochanges, which it also uses.
Usually read_only is handled by the VFS, but we need to be able to
handle it too; we just don't want to print it out twice, so mark it as a
hidden option.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Don't allocate the new bkey_cached until after we've done the btree
lookup; this means we can kill bkey_cached.valid.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes an accounting mismatch for cached data.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new helper, bch2_folio_reservation_get_partial(), which
reserves as many blocks as possible and may return partial success.
__bch2_buffered_write() is switched to the new helper - this fixes
fstests generic/275, the write until -ENOSPC test.
generic/230 now fails: this appears to be a test bug, where xfs_io isn't
looping after a partial write to get the error code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add support for STATX_DIOALIGN to bcachefs, so that direct I/O alignment
restrictions are exposed to userspace in a generic way.
[Before]
```
./statx_test /mnt/bcachefs/test
statx(/mnt/bcachefs/test) = 0
dio mem align:0
dio offset align:0
```
[After]
```
./statx_test /mnt/bcachefs/test
statx(/mnt/bcachefs/test) = 0
dio mem align:1
dio offset align:512
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
As part of improving btree key cache coherency, the bkey_cached.valid
flag is going away.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Set the preferred folio order in the fgp_flags by calling
fgf_set_order(). Page cache will try to allocate large folio of the
preferred order whenever possible instead of allocating multiple 0 order
folios.
This improves the buffered write performance up to 1.25x with default
mount options and up to 1.57x when mounted with no_data_io option with
the following fio workload:
fio --name=bcachefs --filename=/mnt/test --size=100G \
--ioengine=io_uring --iodepth=16 --rw=write --bs=128k
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Use FGP_WRITEBEGIN to avoid repeating the individual FGP flags before
starting a buffered write.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
gc_lock is now only for synchronization between check_alloc_info and
interior btree updates - nothing else
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
this is an internal implementation detail - and we're improving key
cache coherency
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
