summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2019-10-06xfs: remove unused flags arg from xfs_get_aghdr_buf()Eric Sandeen1-3/+2
The flags arg is always passed as zero, so remove it. (xfs_buf_get_uncached takes flags to support XBF_NO_IOACCT for the sb, but that should never be relevant for xfs_get_aghdr_buf) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-06xfs: Fix tail rounding in xfs_alloc_file_space()Max Reitz1-1/+3
To ensure that all blocks touched by the range [offset, offset + count) are allocated, we need to calculate the block count from the difference of the range end (rounded up) and the range start (rounded down). Before this patch, we just round up the byte count, which may lead to unaligned ranges not being fully allocated: $ touch test_file $ block_size=$(stat -fc '%S' test_file) $ fallocate -o $((block_size / 2)) -l $block_size test_file $ xfs_bmap test_file test_file: 0: [0..7]: 1396264..1396271 1: [8..15]: hole There should not be a hole there. Instead, the first two blocks should be fully allocated. With this patch applied, the result is something like this: $ touch test_file $ block_size=$(stat -fc '%S' test_file) $ fallocate -o $((block_size / 2)) -l $block_size test_file $ xfs_bmap test_file test_file: 0: [0..15]: 11024..11039 Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-06elf: don't use MAP_FIXED_NOREPLACE for elf executable mappingsLinus Torvalds1-10/+3
In commit 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") we changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the executable mappings. Then, people reported that it broke some binaries that had overlapping segments from the same file, and commit ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some overlaying elf segment cases. But only some - despite the summary line of that commit, it only did it when it also does a temporary brk vma for one obvious overlapping case. Now Russell King reports another overlapping case with old 32-bit x86 binaries, which doesn't trigger that limited case. End result: we had better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED. Yes, it's a sign of old binaries generated with old tool-chains, but we do pride ourselves on not breaking existing setups. This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp() and the old load_elf_library() use-cases, because nobody has reported breakage for those. Yet. Note that in all the cases seen so far, the overlapping elf sections seem to be just re-mapping of the same executable with different section attributes. We could possibly introduce a new MAP_FIXED_NOFILECHANGE flag or similar, which acts like NOREPLACE, but allows just remapping the same executable file using different protection flags. It's not clear that would make a huge difference to anything, but if people really hate that "elf remaps over previous maps" behavior, maybe at least a more limited form of remapping would alleviate some concerns. Alternatively, we should take a look at our elf_map() logic to see if we end up not mapping things properly the first time. In the meantime, this is the minimal "don't do that then" patch while people hopefully think about it more. Reported-by: Russell King <linux@armlinux.org.uk> Fixes: 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") Fixes: ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments") Cc: Michal Hocko <mhocko@suse.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-05Merge branch 'readdir' (readdir speedup and sanity checking)Linus Torvalds1-35/+133
This makes getdents() and getdents64() do sanity checking on the pathname that it gives to user space. And to mitigate the performance impact of that, it first cleans up the way it does the user copying, so that the code avoids doing the SMAP/PAN updates between each part of the dirent structure write. I really wanted to do this during the merge window, but didn't have time. The conversion of filldir to unsafe_put_user() is something I've had around for years now in a private branch, but the extra pathname checking finally made me clean it up to the point where it is mergable. It's worth noting that the filename validity checking really should be a bit smarter: it would be much better to delay the error reporting until the end of the readdir, so that non-corrupted filenames are still returned. But that involves bigger changes, so let's see if anybody actually hits the corrupt directory entry case before worrying about it further. * branch 'readdir': Make filldir[64]() verify the directory entry filename is valid Convert filldir[64]() from __put_user() to unsafe_put_user()
2019-10-05Make filldir[64]() verify the directory entry filename is validLinus Torvalds1-0/+40
This has been discussed several times, and now filesystem people are talking about doing it individually at the filesystem layer, so head that off at the pass and just do it in getdents{64}(). This is partially based on a patch by Jann Horn, but checks for NUL bytes as well, and somewhat simplified. There's also commentary about how it might be better if invalid names due to filesystem corruption don't cause an immediate failure, but only an error at the end of the readdir(), so that people can still see the filenames that are ok. There's also been discussion about just how much POSIX strictly speaking requires this since it's about filesystem corruption. It's really more "protect user space from bad behavior" as pointed out by Jann. But since Eric Biederman looked up the POSIX wording, here it is for context: "From readdir: The readdir() function shall return a pointer to a structure representing the directory entry at the current position in the directory stream specified by the argument dirp, and position the directory stream at the next entry. It shall return a null pointer upon reaching the end of the directory stream. The structure dirent defined in the <dirent.h> header describes a directory entry. From definitions: 3.129 Directory Entry (or Link) An object that associates a filename with a file. Several directory entries can associate names with the same file. ... 3.169 Filename A name consisting of 1 to {NAME_MAX} bytes used to name a file. The characters composing the name may be selected from the set of all character values excluding the slash character and the null byte. The filenames dot and dot-dot have special meaning. A filename is sometimes referred to as a 'pathname component'." Note that I didn't bother adding the checks to any legacy interfaces that nobody uses. Also note that if this ends up being noticeable as a performance regression, we can fix that to do a much more optimized model that checks for both NUL and '/' at the same time one word at a time. We haven't really tended to optimize 'memchr()', and it only checks for one pattern at a time anyway, and we really _should_ check for NUL too (but see the comment about "soft errors" in the code about why it currently only checks for '/') See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name lookup code looks for pathname terminating characters in parallel. Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/ Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-05Convert filldir[64]() from __put_user() to unsafe_put_user()Linus Torvalds1-35/+93
We really should avoid the "__{get,put}_user()" functions entirely, because they can easily be mis-used and the original intent of being used for simple direct user accesses no longer holds in a post-SMAP/PAN world. Manually optimizing away the user access range check makes no sense any more, when the range check is generally much cheaper than the "enable user accesses" code that the __{get,put}_user() functions still need. So instead of __put_user(), use the unsafe_put_user() interface with user_access_{begin,end}() that really does generate better code these days, and which is generally a nicer interface. Under some loads, the multiple user writes that filldir() does are actually quite noticeable. This also makes the dirent name copy use unsafe_put_user() with a couple of macros. We do not want to make function calls with SMAP/PAN disabled, and the code this generates is quite good when the architecture uses "asm goto" for unsafe_put_user() like x86 does. Note that this doesn't bother with the legacy cases. Nobody should use them anyway, so performance doesn't really matter there. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-04Merge tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+4
Pull block fixes from Jens Axboe: - Mandate timespec64 for the io_uring timeout ABI (Arnd) - Set of NVMe changes via Sagi: - controller removal race fix from Balbir - quirk additions from Gabriel and Jian-Hong - nvme-pci power state save fix from Mario - Add 64bit user commands (for 64bit registers) from Marta - nvme-rdma/nvme-tcp fixes from Max, Mark and Me - Minor cleanups and nits from James, Dan and John - Two s390 dasd fixes (Jan, Stefan) - Have loop change block size in DIO mode (Martijn) - paride pg header ifdef guard (Masahiro) - Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned devices and suboptimal performance on others (Ming) * tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits) block: sed-opal: fix sparse warning: convert __be64 data block: sed-opal: fix sparse warning: obsolete array init. block: pg: add header include guard Revert "s390/dasd: Add discard support for ESE volumes" s390/dasd: Fix error handling during online processing io_uring: use __kernel_timespec in timeout ABI loop: change queue block size to match when using DIO blk-mq: apply normal plugging for HDD blk-mq: honor IO scheduler for multiqueue devices nvme-rdma: fix possible use-after-free in connect timeout nvme: Move ctrl sqsize to generic space nvme: Add ctrl attributes for queue_count and sqsize nvme: allow 64-bit results in passthru commands nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T nvmet-tcp: remove superflous check on request sgl Added QUIRKs for ADATA XPG SX8200 Pro 512GB nvme-rdma: Fix max_hw_sectors calculation nvme: fix an error code in nvme_init_subsystem() nvme-pci: Save PCI state before putting drive into deepest state nvme-tcp: fix wrong stop condition in io_work ...
2019-10-04io_uring: fix reversed nonblock flag for link submissionPavel Begunkov1-1/+1
io_queue_link_head() accepts @force_nonblock flag, but io_ring_submit() passes something opposite. Fixes: c576666863b78 ("io_uring: optimize submit_and_wait API") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-03vfs: Fix EOVERFLOW testing in put_compat_statfs64Eric Sandeen1-13/+4
Today, put_compat_statfs64() disallows nearly any field value over 2^32 if f_bsize is only 32 bits, but that makes no sense. compat_statfs64 is there for the explicit purpose of providing 64-bit fields for f_files, f_ffree, etc. And f_bsize is always only 32 bits. As a result, 32-bit userspace gets -EOVERFLOW for i.e. large file counts even with -D_FILE_OFFSET_BITS=64 set. In reality, only f_bsize and f_frsize can legitimately overflow (fields like f_type and f_namelen should never be large), so test only those fields. This bug was discussed at length some time ago, and this is the proposal Al suggested at https://lkml.org/lkml/2018/8/6/640. It seemed to get dropped amid the discussion of other related changes, but this part seems obviously correct on its own, so I've picked it up and sent it, for expediency. Fixes: 64d2ab32efe3 ("vfs: fix put_compat_statfs64() does not handle errors") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-03btrfs: fix uninitialized ret in ref-verifyJosef Bacik1-1/+1
Coverity caught a case where we could return with a uninitialized value in ret in process_leaf. This is actually pretty likely because we could very easily run into a block group item key and have a garbage value in ret and think there was an errror. Fix this by initializing ret to 0. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: fd708b81d972 ("Btrfs: add a extent ref verify tool") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-02nfs: Fix nfsi->nrequests count error on nfs_inode_remove_requestZhangXiaoxu1-2/+3
When xfstests testing, there are some WARNING as below: WARNING: CPU: 0 PID: 6235 at fs/nfs/inode.c:122 nfs_clear_inode+0x9c/0xd8 Modules linked in: CPU: 0 PID: 6235 Comm: umount.nfs Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO) pc : nfs_clear_inode+0x9c/0xd8 lr : nfs_evict_inode+0x60/0x78 sp : fffffc000f68fc00 x29: fffffc000f68fc00 x28: fffffe00c53155c0 x27: fffffe00c5315000 x26: fffffc0009a63748 x25: fffffc000f68fd18 x24: fffffc000bfaaf40 x23: fffffc000936d3c0 x22: fffffe00c4ff5e20 x21: fffffc000bfaaf40 x20: fffffe00c4ff5d10 x19: fffffc000c056000 x18: 000000000000003c x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000040 x14: 0000000000000228 x13: fffffc000c3a2000 x12: 0000000000000045 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : fffffc00084b027c x5 : fffffc0009a64000 x4 : fffffe00c0e77400 x3 : fffffc000c0563a8 x2 : fffffffffffffffb x1 : 000000000000764e x0 : 0000000000000001 Call trace: nfs_clear_inode+0x9c/0xd8 nfs_evict_inode+0x60/0x78 evict+0x108/0x380 dispose_list+0x70/0xa0 evict_inodes+0x194/0x210 generic_shutdown_super+0xb0/0x220 nfs_kill_super+0x40/0x88 deactivate_locked_super+0xb4/0x120 deactivate_super+0x144/0x160 cleanup_mnt+0x98/0x148 __cleanup_mnt+0x38/0x50 task_work_run+0x114/0x160 do_notify_resume+0x2f8/0x308 work_pending+0x8/0x14 The nrequest should be increased/decreased only if PG_INODE_REF flag was setted. But in the nfs_inode_remove_request function, it maybe decrease when no PG_INODE_REF flag, this maybe lead nrequests count error. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-10-01btrfs: allocate new inode in NOFS contextJosef Bacik1-0/+3
A user reported a lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.2.11-gentoo #2 Not tainted ------------------------------------------------------ kswapd0/711 is trying to acquire lock: 000000007777a663 (sb_internal){.+.+}, at: start_transaction+0x3a8/0x500 but task is already holding lock: 000000000ba86300 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}: kmem_cache_alloc+0x1f/0x1c0 btrfs_alloc_inode+0x1f/0x260 alloc_inode+0x16/0xa0 new_inode+0xe/0xb0 btrfs_new_inode+0x70/0x610 btrfs_symlink+0xd0/0x420 vfs_symlink+0x9c/0x100 do_symlinkat+0x66/0xe0 do_syscall_64+0x55/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (sb_internal){.+.+}: __sb_start_write+0xf6/0x150 start_transaction+0x3a8/0x500 btrfs_commit_inode_delayed_inode+0x59/0x110 btrfs_evict_inode+0x19e/0x4c0 evict+0xbc/0x1f0 inode_lru_isolate+0x113/0x190 __list_lru_walk_one.isra.4+0x5c/0x100 list_lru_walk_one+0x32/0x50 prune_icache_sb+0x36/0x80 super_cache_scan+0x14a/0x1d0 do_shrink_slab+0x131/0x320 shrink_node+0xf7/0x380 balance_pgdat+0x2d5/0x640 kswapd+0x2ba/0x5e0 kthread+0x147/0x160 ret_from_fork+0x24/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal); lock(fs_reclaim); lock(sb_internal); *** DEADLOCK *** 3 locks held by kswapd0/711: #0: 000000000ba86300 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x30 #1: 000000004a5100f8 (shrinker_rwsem){++++}, at: shrink_node+0x9a/0x380 #2: 00000000f956fa46 (&type->s_umount_key#30){++++}, at: super_cache_scan+0x35/0x1d0 stack backtrace: CPU: 7 PID: 711 Comm: kswapd0 Not tainted 5.2.11-gentoo #2 Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.4.2 09/29/2017 Call Trace: dump_stack+0x85/0xc7 print_circular_bug.cold.40+0x1d9/0x235 __lock_acquire+0x18b1/0x1f00 lock_acquire+0xa6/0x170 ? start_transaction+0x3a8/0x500 __sb_start_write+0xf6/0x150 ? start_transaction+0x3a8/0x500 start_transaction+0x3a8/0x500 btrfs_commit_inode_delayed_inode+0x59/0x110 btrfs_evict_inode+0x19e/0x4c0 ? var_wake_function+0x20/0x20 evict+0xbc/0x1f0 inode_lru_isolate+0x113/0x190 ? discard_new_inode+0xc0/0xc0 __list_lru_walk_one.isra.4+0x5c/0x100 ? discard_new_inode+0xc0/0xc0 list_lru_walk_one+0x32/0x50 prune_icache_sb+0x36/0x80 super_cache_scan+0x14a/0x1d0 do_shrink_slab+0x131/0x320 shrink_node+0xf7/0x380 balance_pgdat+0x2d5/0x640 kswapd+0x2ba/0x5e0 ? __wake_up_common_lock+0x90/0x90 kthread+0x147/0x160 ? balance_pgdat+0x640/0x640 ? __kthread_create_on_node+0x160/0x160 ret_from_fork+0x24/0x30 This is because btrfs_new_inode() calls new_inode() under the transaction. We could probably move the new_inode() outside of this but for now just wrap it in memalloc_nofs_save(). Reported-by: Zdenek Sojka <zsojka@seznam.cz> Fixes: 712e36c5f2a7 ("btrfs: use GFP_KERNEL in btrfs_alloc_inode") CC: stable@vger.kernel.org # 4.16+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-01btrfs: fix balance convert to single on 32-bit host CPUsZygo Blaxell1-1/+5
Currently, the command: btrfs balance start -dconvert=single,soft . on a Raspberry Pi produces the following kernel message: BTRFS error (device mmcblk0p2): balance: invalid convert data profile single This fails because we use is_power_of_2(unsigned long) to validate the new data profile, the constant for 'single' profile uses bit 48, and there are only 32 bits in a long on ARM. Fix by open-coding the check using u64 variables. Tested by completing the original balance command on several Raspberry Pis. Fixes: 818255feece6 ("btrfs: use common helper instead of open coding a bit test") CC: stable@vger.kernel.org # 4.20+ Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-01btrfs: fix incorrect updating of log root treeJosef Bacik1-9/+27
We've historically had reports of being unable to mount file systems because the tree log root couldn't be read. Usually this is the "parent transid failure", but could be any of the related errors, including "fsid mismatch" or "bad tree block", depending on which block got allocated. The modification of the individual log root items are serialized on the per-log root root_mutex. This means that any modification to the per-subvol log root_item is completely protected. However we update the root item in the log root tree outside of the log root tree log_mutex. We do this in order to allow multiple subvolumes to be updated in each log transaction. This is problematic however because when we are writing the log root tree out we update the super block with the _current_ log root node information. Since these two operations happen independently of each other, you can end up updating the log root tree in between writing out the dirty blocks and setting the super block to point at the current root. This means we'll point at the new root node that hasn't been written out, instead of the one we should be pointing at. Thus whatever garbage or old block we end up pointing at complains when we mount the file system later and try to replay the log. Fix this by copying the log's root item into a local root item copy. Then once we're safely under the log_root_tree->log_mutex we update the root item in the log_root_tree. This way we do not modify the log_root_tree while we're committing it, fixing the problem. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Chris Mason <clm@fb.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-01Btrfs: fix memory leak due to concurrent append writes with fiemapFilipe Manana1-1/+12
When we have a buffered write that starts at an offset greater than or equals to the file's size happening concurrently with a full ranged fiemap, we can end up leaking an extent state structure. Suppose we have a file with a size of 1Mb, and before the buffered write and fiemap are performed, it has a single extent state in its io tree representing the range from 0 to 1Mb, with the EXTENT_DELALLOC bit set. The following sequence diagram shows how the memory leak happens if a fiemap a buffered write, starting at offset 1Mb and with a length of 4Kb, are performed concurrently. CPU 1 CPU 2 extent_fiemap() --> it's a full ranged fiemap range from 0 to LLONG_MAX - 1 (9223372036854775807) --> locks range in the inode's io tree --> after this we have 2 extent states in the io tree: --> 1 for range [0, 1Mb[ with the bits EXTENT_LOCKED and EXTENT_DELALLOC_BITS set --> 1 for the range [1Mb, LLONG_MAX[ with the EXTENT_LOCKED bit set --> start buffered write at offset 1Mb with a length of 4Kb btrfs_file_write_iter() btrfs_buffered_write() --> cached_state is NULL lock_and_cleanup_extent_if_need() --> returns 0 and does not lock range because it starts at current i_size / eof --> cached_state remains NULL btrfs_dirty_pages() btrfs_set_extent_delalloc() (...) __set_extent_bit() --> splits extent state for range [1Mb, LLONG_MAX[ and now we have 2 extent states: --> one for the range [1Mb, 1Mb + 4Kb[ with EXTENT_LOCKED set --> another one for the range [1Mb + 4Kb, LLONG_MAX[ with EXTENT_LOCKED set as well --> sets EXTENT_DELALLOC on the extent state for the range [1Mb, 1Mb + 4Kb[ --> caches extent state [1Mb, 1Mb + 4Kb[ into @cached_state because it has the bit EXTENT_LOCKED set --> btrfs_buffered_write() ends up with a non-NULL cached_state and never calls anything to release its reference on it, resulting in a memory leak Fix this by calling free_extent_state() on cached_state if the range was not locked by lock_and_cleanup_extent_if_need(). The same issue can happen if anything else other than fiemap locks a range that covers eof and beyond. This could be triggered, sporadically, by test case generic/561 from the fstests suite, which makes duperemove run concurrently with fsstress, and duperemove does plenty of calls to fiemap. When CONFIG_BTRFS_DEBUG is set the leak is reported in dmesg/syslog when removing the btrfs module with a message like the following: [77100.039461] BTRFS: state leak: start 6574080 end 6582271 state 16402 in tree 0 refs 1 Otherwise (CONFIG_BTRFS_DEBUG not set) detectable with kmemleak. CC: stable@vger.kernel.org # 4.16+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-01io_uring: use __kernel_timespec in timeout ABIArnd Bergmann1-4/+4
All system calls use struct __kernel_timespec instead of the old struct timespec, but this one was just added with the old-style ABI. Change it now to enforce the use of __kernel_timespec, avoiding ABI confusion and the need for compat handlers on 32-bit architectures. Any user space caller will have to use __kernel_timespec now, but this is unambiguous and works for any C library regardless of the time_t definition. A nicer way to specify the timeout would have been a less ambiguous 64-bit nanosecond value, but I suppose it's too late now to change that as this would impact both 32-bit and 64-bit users. Fixes: 5262f567987d ("io_uring: IORING_OP_TIMEOUT support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-01erofs: fix mis-inplace determination related with noio chainGao Xiang1-2/+10
Fix a recent cleanup patch. noio (bypass) chain is handled asynchronously against submit chain, therefore inplace I/O or pagevec cannot be applied to such pages. Add detailed comment for this as well. Fixes: 97e86a858bc3 ("staging: erofs: tidy up decompression frontend") Reviewed-by: Chao Yu <yuchao0@huawei.com> Link: https://lore.kernel.org/r/20190922100434.229340-1-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
2019-10-01erofs: fix erofs_get_meta_page locking due to a cleanupGao Xiang1-3/+7
After doing more drop_caches stress test on our products, I found the mistake introduced by a very recent cleanup [1]. The current rule is that "erofs_get_meta_page" should be returned with page locked (although it's mostly unnecessary for read-only fs after pages are PG_uptodate), but a fix should be done for this. [1] https://lore.kernel.org/r/20190904020912.63925-26-gaoxiang25@huawei.com Fixes: 618f40ea026b ("erofs: use read_cache_page_gfp for erofs_get_meta_page") Reviewed-by: Chao Yu <yuchao0@huawei.com> Link: https://lore.kernel.org/r/20190921184355.149928-1-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
2019-10-01erofs: fix return value check in erofs_read_superblock()Wei Yongjun1-2/+2
In case of error, the function read_mapping_page() returns ERR_PTR() not NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: fe7c2423570d ("erofs: use read_mapping_page instead of sb_bread") Reviewed-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20190918083033.47780-1-weiyongjun1@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
2019-09-30Merge tag 'for-5.4-rc1-tag' of ↵Linus Torvalds5-18/+58
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A bunch of fixes that accumulated in recent weeks, mostly material for stable. Summary: - fix for regression from 5.3 that prevents to use balance convert with single profile - qgroup fixes: rescan race, accounting leak with multiple writers, potential leak after io failure recovery - fix for use after free in relocation (reported by KASAN) - other error handling fixups" * tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space btrfs: Fix a regression which we can't convert to SINGLE profile btrfs: relocation: fix use-after-free on dead relocation roots Btrfs: fix race setting up and completing qgroup rescan workers Btrfs: fix missing error return if writeback for extent buffer never started btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
2019-09-29Merge branch 'work.misc' of ↵Linus Torvalds4-10/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "A couple of misc patches" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs dynroot: switch to simple_dir_operations fs/handle.c - fix up kerneldoc
2019-09-29Merge tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds14-26/+194
Pull more cifs updates from Steve French: "Fixes from the recent SMB3 Test events and Storage Developer Conference (held the last two weeks). Here are nine smb3 patches including an important patch for debugging traces with wireshark, with three patches marked for stable. Additional fixes from last week to better handle some newly discovered reparse points, and a fix the create/mkdir path for setting the mode more atomically (in SMB3 Create security descriptor context), and one for path name processing are still being tested so are not included here" * tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix oplock handling for SMB 2.1+ protocols smb3: missing ACL related flags smb3: pass mode bits into create calls smb3: Add missing reparse tags CIFS: fix max ea value size fs/cifs/sess.c: Remove set but not used variable 'capabilities' fs/cifs/smb2pdu.c: Make SMB2_notify_init static smb3: fix leak in "open on server" perf counter smb3: allow decryption keys to be dumped by admin for debugging
2019-09-29Merge branch 'entropy'Linus Torvalds1-0/+3
Merge active entropy generation updates. This is admittedly partly "for discussion". We need to have a way forward for the boot time deadlocks where user space ends up waiting for more entropy, but no entropy is forthcoming because the system is entirely idle just waiting for something to happen. While this was triggered by what is arguably a user space bug with GDM/gnome-session asking for secure randomness during early boot, when they didn't even need any such truly secure thing, the issue ends up being that our "getrandom()" interface is prone to that kind of confusion, because people don't think very hard about whether they want to block for sufficient amounts of entropy. The approach here-in is to decide to not just passively wait for entropy to happen, but to start actively collecting it if it is missing. This is not necessarily always possible, but if the architecture has a CPU cycle counter, there is a fair amount of noise in the exact timings of reasonably complex loads. We may end up tweaking the load and the entropy estimates, but this should be at least a reasonable starting point. As part of this, we also revert the revert of the ext4 IO pattern improvement that ended up triggering the reported lack of external entropy. * getrandom() active entropy waiting: Revert "Revert "ext4: make __ext4_get_inode_loc plug"" random: try to actively add entropy rather than passively wait for it
2019-09-29Revert "Revert "ext4: make __ext4_get_inode_loc plug""Linus Torvalds1-0/+3
This reverts commit 72dbcf72156641fde4d8ea401e977341bfd35a05. Instead of waiting forever for entropy that may just not happen, we now try to actively generate entropy when required, and are thus hopefully avoiding the problem that caused the nice ext4 IO pattern fix to be reverted. So revert the revert. Cc: Ahmed S. Darwish <darwish.07@gmail.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Alexander E. Patrakov <patrakov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-28Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Apply a number of membarrier related fixes and cleanups, which fixes a use-after-free race in the membarrier code - Introduce proper RCU protection for tasks on the runqueue - to get rid of the subtle task_rcu_dereference() interface that was easy to get wrong - Misc fixes, but also an EAS speedup * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Avoid redundant EAS calculation sched/core: Remove double update_max_interval() call on CPU startup sched/core: Fix preempt_schedule() interrupt return comment sched/fair: Fix -Wunused-but-set-variable warnings sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr() sched/membarrier: Return -ENOMEM to userspace on memory allocation failure sched/membarrier: Skip IPIs when mm->mm_users == 1 selftests, sched/membarrier: Add multi-threaded test sched/membarrier: Fix p->mm->membarrier_state racy load sched/membarrier: Call sync_core only before usermode for same mm sched/membarrier: Remove redundant check sched/membarrier: Fix private expedited registration check tasks, sched/core: RCUify the assignment of rq->curr tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue tasks: Add a count of task RCU users sched/core: Convert vcpu_is_preempted() from macro to an inline function sched/fair: Remove unused cfs_rq_clock_task() function
2019-09-28Merge branch 'next-lockdown' of ↵Linus Torvalds4-3/+107
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-27Merge tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linuxLinus Torvalds30-562/+2004
Pull nfsd updates from Bruce Fields: "Highlights: - Add a new knfsd file cache, so that we don't have to open and close on each (NFSv2/v3) READ or WRITE. This can speed up read and write in some cases. It also replaces our readahead cache. - Prevent silent data loss on write errors, by treating write errors like server reboots for the purposes of write caching, thus forcing clients to resend their writes. - Tweak the code that allocates sessions to be more forgiving, so that NFSv4.1 mounts are less likely to hang when a server already has a lot of clients. - Eliminate an arbitrary limit on NFSv4 ACL sizes; they should now be limited only by the backend filesystem and the maximum RPC size. - Allow the server to enforce use of the correct kerberos credentials when a client reclaims state after a reboot. And some miscellaneous smaller bugfixes and cleanup" * tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux: (34 commits) sunrpc: clean up indentation issue nfsd: fix nfs read eof detection nfsd: Make nfsd_reset_boot_verifier_locked static nfsd: degraded slot-count more gracefully as allocation nears exhaustion. nfsd: handle drc over-allocation gracefully. nfsd: add support for upcall version 2 nfsd: add a "GetVersion" upcall for nfsdcld nfsd: Reset the boot verifier on all write I/O errors nfsd: Don't garbage collect files that might contain write errors nfsd: Support the server resetting the boot verifier nfsd: nfsd_file cache entries should be per net namespace nfsd: eliminate an unnecessary acl size limit Deprecate nfsd fault injection nfsd: remove duplicated include from filecache.c nfsd: Fix the documentation for svcxdr_tmpalloc() nfsd: Fix up some unused variable warnings nfsd: close cached files prior to a REMOVE or RENAME that would replace target nfsd: rip out the raparms cache nfsd: have nfsd_test_lock use the nfsd_file cache nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cache ...
2019-09-27Merge tag 'virtio-fs-5.4' of ↵Linus Torvalds5-0/+1220
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse virtio-fs support from Miklos Szeredi: "Virtio-fs allows exporting directory trees on the host and mounting them in guest(s). This isn't actually a new filesystem, but a glue layer between the fuse filesystem and a virtio based back-end. It's similar in functionality to the existing virtio-9p solution, but significantly faster in benchmarks and has better POSIX compliance. Further permformance improvements can be achieved by sharing the page cache between host and guest, allowing for faster I/O and reduced memory use. Kata Containers have been including the out-of-tree virtio-fs (with the shared page cache patches as well) since version 1.7 as an experimental feature. They have been active in development and plan to switch from virtio-9p to virtio-fs as their default solution. There has been interest from other sources as well. The userspace infrastructure is slated to be merged into qemu once the kernel part hits mainline. This was developed by Vivek Goyal, Dave Gilbert and Stefan Hajnoczi" * tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: virtio-fs: add virtiofs filesystem virtio-fs: add Documentation/filesystems/virtiofs.rst fuse: reserve values for mapping protocol
2019-09-27Merge tag '9p-for-5.4' of git://github.com/martinetd/linuxLinus Torvalds3-2/+7
Pull 9p updates from Dominique Martinet: "Some of the usual small fixes and cleanup. Small fixes all around: - avoid overlayfs copy-up for PRIVATE mmaps - KUMSAN uninitialized warning for transport error - one syzbot memory leak fix in 9p cache - internal API cleanup for v9fs_fill_super" * tag '9p-for-5.4' of git://github.com/martinetd/linux: 9p/vfs_super.c: Remove unused parameter data in v9fs_fill_super 9p/cache.c: Fix memory leak in v9fs_cache_session_get_cookie 9p: Transport error uninitialized 9p: avoid attaching writeback_fid on mmap with type PRIVATE
2019-09-27Merge tag 'for-5.4/io_uring-2019-09-27' of git://git.kernel.dk/linux-blockLinus Torvalds1-11/+57
Pull more io_uring updates from Jens Axboe: "Just two things in here: - Improvement to the io_uring CQ ring wakeup for batched IO (me) - Fix wrong comparison in poll handling (yangerkun) I realize the first one is a little late in the game, but it felt pointless to hold it off until the next release. Went through various testing and reviews with Pavel and peterz" * tag 'for-5.4/io_uring-2019-09-27' of git://git.kernel.dk/linux-block: io_uring: make CQ ring wakeups be more efficient io_uring: compare cached_cq_tail with cq.head in_io_uring_poll
2019-09-27btrfs: qgroup: Fix reserved data space leak if we have multiple reserve callsQu Wenruo1-0/+3
[BUG] The following script can cause btrfs qgroup data space leak: mkfs.btrfs -f $dev mount $dev -o nospace_cache $mnt btrfs subv create $mnt/subv btrfs quota en $mnt btrfs quota rescan -w $mnt btrfs qgroup limit 128m $mnt/subv for (( i = 0; i < 3; i++)); do # Create 3 64M holes for latter fallocate to fail truncate -s 192m $mnt/subv/file xfs_io -c "pwrite 64m 4k" $mnt/subv/file > /dev/null xfs_io -c "pwrite 128m 4k" $mnt/subv/file > /dev/null sync # it's supposed to fail, and each failure will leak at least 64M # data space xfs_io -f -c "falloc 0 192m" $mnt/subv/file &> /dev/null rm $mnt/subv/file sync done # Shouldn't fail after we removed the file xfs_io -f -c "falloc 0 64m" $mnt/subv/file [CAUSE] Btrfs qgroup data reserve code allow multiple reservations to happen on a single extent_changeset: E.g: btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_1M); btrfs_qgroup_reserve_data(inode, &data_reserved, SZ_1M, SZ_2M); btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_4M); Btrfs qgroup code has its internal tracking to make sure we don't double-reserve in above example. The only pattern utilizing this feature is in the main while loop of btrfs_fallocate() function. However btrfs_qgroup_reserve_data()'s error handling has a bug in that on error it clears all ranges in the io_tree with EXTENT_QGROUP_RESERVED flag but doesn't free previously reserved bytes. This bug has a two fold effect: - Clearing EXTENT_QGROUP_RESERVED ranges This is the correct behavior, but it prevents btrfs_qgroup_check_reserved_leak() to catch the leakage as the detector is purely EXTENT_QGROUP_RESERVED flag based. - Leak the previously reserved data bytes. The bug manifests when N calls to btrfs_qgroup_reserve_data are made and the last one fails, leaking space reserved in the previous ones. [FIX] Also free previously reserved data bytes when btrfs_qgroup_reserve_data fails. Fixes: 524725537023 ("btrfs: qgroup: Introduce btrfs_qgroup_reserve_data function") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-27btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data spaceQu Wenruo1-1/+1
[BUG] Under the following case with qgroup enabled, if some error happened after we have reserved delalloc space, then in error handling path, we could cause qgroup data space leakage: From btrfs_truncate_block() in inode.c: ret = btrfs_delalloc_reserve_space(inode, &data_reserved, block_start, blocksize); if (ret) goto out; again: page = find_or_create_page(mapping, index, mask); if (!page) { btrfs_delalloc_release_space(inode, data_reserved, block_start, blocksize, true); btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, true); ret = -ENOMEM; goto out; } [CAUSE] In the above case, btrfs_delalloc_reserve_space() will call btrfs_qgroup_reserve_data() and mark the io_tree range with EXTENT_QGROUP_RESERVED flag. In the error handling path, we have the following call stack: btrfs_delalloc_release_space() |- btrfs_free_reserved_data_space() |- btrsf_qgroup_free_data() |- __btrfs_qgroup_release_data(reserved=@reserved, free=1) |- qgroup_free_reserved_data(reserved=@reserved) |- clear_record_extent_bits(); |- freed += changeset.bytes_changed; However due to a completion bug, qgroup_free_reserved_data() will clear EXTENT_QGROUP_RESERVED flag in BTRFS_I(inode)->io_failure_tree, other than the correct BTRFS_I(inode)->io_tree. Since io_failure_tree is never marked with that flag, btrfs_qgroup_free_data() will not free any data reserved space at all, causing a leakage. This type of error handling can only be triggered by errors outside of qgroup code. So EDQUOT error from qgroup can't trigger it. [FIX] Fix the wrong target io_tree. Reported-by: Josef Bacik <josef@toxicpanda.com> Fixes: bc42bda22345 ("btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-26CIFS: Fix oplock handling for SMB 2.1+ protocolsPavel Shilovsky1-0/+5
There may be situations when a server negotiates SMB 2.1 protocol version or higher but responds to a CREATE request with an oplock rather than a lease. Currently the client doesn't handle such a case correctly: when another CREATE comes in the server sends an oplock break to the initial CREATE and the client doesn't send an ack back due to a wrong caching level being set (READ instead of RWH). Missing an oplock break ack makes the server wait until the break times out which dramatically increases the latency of the second CREATE. Fix this by properly detecting oplocks when using SMB 2.1 protocol version and higher. Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-09-26smb3: missing ACL related flagsSteve French1-1/+80
Various SMB3 ACL related flags (for security descriptor and ACEs for example) were missing and some fields are different in SMB3 and CIFS. Update cifsacl.h definitions based on current MS-DTYP specification. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2019-09-26Merge tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds11-177/+365
Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - Dequeue the request from the receive queue while we're re-encoding # v4.20+ - Fix buffer handling of GSS MIC without slack # 5.1 Features: - Increase xprtrdma maximum transport header and slot table sizes - Add support for nfs4_call_sync() calls using a custom rpc_task_struct - Optimize the default readahead size - Enable pNFS filelayout LAYOUTGET on OPEN Other bugfixes and cleanups: - Fix possible null-pointer dereferences and memory leaks - Various NFS over RDMA cleanups - Various NFS over RDMA comment updates - Don't receive TCP data into a reset request buffer - Don't try to parse incomplete RPC messages - Fix congestion window race with disconnect - Clean up pNFS return-on-close error handling - Fixes for NFS4ERR_OLD_STATEID handling" * tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (53 commits) pNFS/filelayout: enable LAYOUTGET on OPEN NFS: Optimise the default readahead size NFSv4: Handle NFS4ERR_OLD_STATEID in LOCKU NFSv4: Handle NFS4ERR_OLD_STATEID in CLOSE/OPEN_DOWNGRADE NFSv4: Fix OPEN_DOWNGRADE error handling pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid NFSv4: Add a helper to increment stateid seqids NFSv4: Handle RPC level errors in LAYOUTRETURN NFSv4: Handle NFS4ERR_DELAY correctly in return-on-close NFSv4: Clean up pNFS return-on-close error handling pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors NFS: remove unused check for negative dentry NFSv3: use nfs_add_or_obtain() to create and reference inodes NFS: Refactor nfs_instantiate() for dentry referencing callers SUNRPC: Fix congestion window race with disconnect SUNRPC: Don't try to parse incomplete RPC messages SUNRPC: Rename xdr_buf_read_netobj to xdr_buf_read_mic SUNRPC: Fix buffer handling of GSS MIC without slack SUNRPC: RPC level errors should always set task->tk_rpc_status SUNRPC: Don't receive TCP data into a request buffer that has been reset ...
2019-09-26binfmt_elf: Do not move brk for INTERP-less ET_EXECKees Cook1-1/+2
When brk was moved for binaries without an interpreter, it should have been limited to ET_DYN only. In other words, the special case was an ET_DYN that lacks an INTERP, not just an executable that lacks INTERP. The bug manifested for giant static executables, where the brk would end up in the middle of the text area on 32-bit architectures. Reported-and-tested-by: Richard Kojedzinszky <richard@kojedz.in> Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26Merge tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds5-21/+17
Pull xfs fixes from Darrick Wong: "There are a couple of bug fixes and some small code cleanups that came in recently: - Minor code cleanups - Fix a superblock logging error - Ensure that collapse range converts the data fork to extents format when necessary - Revert the ALLOC_USERDATA cleanup because it caused subtle behavior regressions" * tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: avoid unused to_mp() function warning xfs: log proper length of superblock xfs: revert 1baa2800e62d ("xfs: remove the unused XFS_ALLOC_USERDATA flag") xfs: removed unneeded variable xfs: convert inode to extent format after extent merge due to shift
2019-09-26Merge branch 'work.mount3' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull jffs2 fix from Al Viro: "braino fix for mount API conversion for jffs2" * 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: jffs2: Fix mounting under new mount API
2019-09-26Merge branch 'akpm' (patches from Andrew)Linus Torvalds16-71/+37
Merge more updates from Andrew Morton: - almost all of the rest of -mm - various other subsystems Subsystems affected by this patch series: memcg, misc, core-kernel, lib, checkpatch, reiserfs, fat, fork, cpumask, kexec, uaccess, kconfig, kgdb, bug, ipc, lzo, kasan, madvise, cleanups, pagemap * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (77 commits) arch/sparc/include/asm/pgtable_64.h: fix build mm: treewide: clarify pgtable_page_{ctor,dtor}() naming ntfs: remove (un)?likely() from IS_ERR() conditions IB/hfi1: remove unlikely() from IS_ERR*() condition xfs: remove unlikely() from WARN_ON() condition wimax/i2400m: remove unlikely() from WARN*() condition fs: remove unlikely() from WARN_ON() condition xen/events: remove unlikely() from WARN() condition checkpatch: check for nested (un)?likely() calls hexagon: drop empty and unused free_initrd_mem mm: factor out common parts between MADV_COLD and MADV_PAGEOUT mm: introduce MADV_PAGEOUT mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM mm: introduce MADV_COLD mm: untag user pointers in mmap/munmap/mremap/brk vfio/type1: untag user pointers in vaddr_get_pfn tee/shm: untag user pointers in tee_shm_register media/v4l2-core: untag user pointers in videobuf_dma_contig_user_get drm/radeon: untag user pointers in radeon_gem_userptr_ioctl drm/amdgpu: untag user pointers ...
2019-09-26ntfs: remove (un)?likely() from IS_ERR() conditionsDenis Efremov4-9/+9
"likely(!IS_ERR(x))" is excessive. IS_ERR() already uses unlikely() internally. Link: http://lkml.kernel.org/r/20190829165025.15750-11-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26xfs: remove unlikely() from WARN_ON() conditionDenis Efremov1-2/+2
"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely() internally. Link: http://lkml.kernel.org/r/20190829165025.15750-7-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26fs: remove unlikely() from WARN_ON() conditionDenis Efremov1-1/+1
"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely() internally. Link: http://lkml.kernel.org/r/20190829165025.15750-5-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26jffs2: Fix mounting under new mount APIDavid Howells1-2/+0
The mounting of jffs2 is broken due to the changes from the new mount API because it specifies a "source" operation, but then doesn't actually process it. But because it specified it, it doesn't return -ENOPARAM and the caller doesn't process it either and the source gets lost. Fix this by simply removing the source parameter from jffs2 and letting the VFS deal with it in the default manner. To test it, enable CONFIG_MTD_MTDRAM and allow the default size and erase block size parameters, then try and mount the /dev/mtdblock<N> file that that creates as jffs2. No need to initialise it. Fixes: ec10a24f10c8 ("vfs: Convert jffs2 to use the new mount API") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> cc: David Woodhouse <dwmw2@infradead.org> cc: Richard Weinberger <richard@nod.at> cc: linux-mtd@lists.infradead.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-26io_uring: make CQ ring wakeups be more efficientJens Axboe1-10/+56
For batched IO, it's not uncommon for waiters to ask for more than 1 IO to complete before being woken up. This is a problem with wait_event() since tasks will get woken for every IO that completes, re-check condition, then go back to sleep. For batch counts on the order of what you do for high IOPS, that can result in 10s of extra wakeups for the waiting task. Add a private wake function that checks for the wake up count criteria being met before calling autoremove_wake_function(). Pavel reports that one test case he has runs 40% faster with proper batching of wakeups. Reported-by: Pavel Begunkov <asml.silence@gmail.com> Tested-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-26smb3: pass mode bits into create callsSteve French7-21/+51
We need to populate an ACL (security descriptor open context) on file and directory correct. This patch passes in the mode. Followon patch will build the open context and the security descriptor (from the mode) that goes in the open context. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2019-09-25userfaultfd: untag user pointersAndrey Konovalov1-10/+12
This patch is a part of a series that extends kernel ABI to allow to pass tagged user pointers (with the top byte set to something else other than 0x00) as syscall arguments. userfaultfd code use provided user pointers for vma lookups, which can only by done with untagged pointers. Untag user pointers in validate_range(). Link: http://lkml.kernel.org/r/cdc59ddd7011012ca2e689bc88c3b65b1ea7e413.1563904656.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25fs/namespace: untag user pointers in copy_mount_optionsAndrey Konovalov1-1/+1
This patch is a part of a series that extends kernel ABI to allow to pass tagged user pointers (with the top byte set to something else other than 0x00) as syscall arguments. In copy_mount_options a user address is being subtracted from TASK_SIZE. If the address is lower than TASK_SIZE, the size is calculated to not allow the exact_copy_from_user() call to cross TASK_SIZE boundary. However if the address is tagged, then the size will be calculated incorrectly. Untag the address before subtracting. Link: http://lkml.kernel.org/r/1de225e4a54204bfd7f25dac2635e31aa4aa1d90.1563904656.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25fat: delete an unnecessary check before brelse()Markus Elfring1-3/+1
brelse() tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Link: http://lkml.kernel.org/r/cfff3b81-fb5d-af26-7b5e-724266509045@web.de Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25fs/reiserfs/do_balan.c: remove set but not used variableJason Yan1-2/+1
Fix the following gcc warning: fs/reiserfs/do_balan.c: In function balance_leaf_insert_right: fs/reiserfs/do_balan.c:629:6: warning: variable ret set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/20190827032932.46622-2-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Cc: zhengbin <zhengbin13@huawei.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25fs/reiserfs/journal.c: remove set but not used variableJason Yan1-4/+3
Fix the following gcc warning: fs/reiserfs/journal.c: In function flush_used_journal_lists: fs/reiserfs/journal.c:1791:6: warning: variable ret set but not used [-Wunused-but-set-variable] Link: http://lkml.kernel.org/r/20190827032932.46622-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Cc: zhengbin <zhengbin13@huawei.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>