summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-05-07Merge tag 'v6.4-p2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
2023-05-07Merge tag 'clk-for-linus' of ↵Linus Torvalds3-12/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate"
2023-05-07Merge tag 'mailbox-v6.4' of ↵Linus Torvalds9-99/+136
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel
2023-05-07Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linuxLinus Torvalds2-21/+21
Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages
2023-05-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds7-850/+43
Pull more SCSI updates from James Bottomley: "Six late arriving patches for the merge window. Five are minor assorted fixes and updates. The IPR driver change removes SATA support, which will now allow a major cleanup in the ATA subsystem because it was the only driver still using the old attachment mechanism. The driver is only used on power systems and SATA was used to support a DVD device, which has long been moved to a different hba. IBM chose this route instead of porting ipr to the newer SATA interfaces" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Fix use after free bug in qedi_remove() scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue scsi: ipr: Remove several unused variables scsi: pm80xx: Log device registration scsi: ipr: Remove SATA support scsi: scsi_debug: Abort commands from scsi_debug_device_reset()
2023-05-06Merge tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linuxLinus Torvalds9-13/+82
Pull more block updates from Jens Axboe: - MD pull request via Song: - Improve raid5 sequential IO performance on spinning disks, which fixes a regression since v6.0 (Jan Kara) - Fix bitmap offset types, which fixes an issue introduced in this merge window (Jonathan Derrick) - Cleanup of hweight type used for cgroup writeback (Maxim) - Fix a regression with the "has_submit_bio" changes across partitions (Ming) - Cleanup of QUEUE_FLAG_ADD_RANDOM clearing. We used to set this flag on queues non blk-mq queues, and hence some drivers clear it unconditionally. Since all of these have since been converted to true blk-mq drivers, drop the useless clear as the bit is not set (Chaitanya) - Fix the flags being set in a bio for a flush for drbd (Christoph) - Cleanup and deduplication of the code handling setting block device capacity (Damien) - Fix for ublk handling IO timeouts (Ming) - Fix for a regression in blk-cgroup teardown (Tao) - NBD documentation and code fixes (Eric) - Convert blk-integrity to using device_attributes rather than a second kobject to manage lifetimes (Thomas) * tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux: ublk: add timeout handler drbd: correctly submit flush bio on barrier mailmap: add mailmap entries for Jens Axboe block: Skip destroyed blkg when restart in blkg_destroy_all() writeback: fix call of incorrect macro md: Fix bitmap offset type in sb writer md/raid5: Improve performance for sequential IO docs nbd: userspace NBD now favors github over sourceforge block nbd: use req.cookie instead of req.handle uapi nbd: add cookie alias to handle uapi nbd: improve doc links to userspace spec blk-integrity: register sysfs attributes on struct device blk-integrity: convert to struct device_attribute blk-integrity: use sysfs_emit block/drivers: remove dead clear of random flag block: sync part's ->bd_has_submit_bio with disk's block: Cleanup set_capacity()/bdev_set_nr_sectors()
2023-05-05Merge tag 'net-6.4-rc1' of ↵Linus Torvalds47-325/+604
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...
2023-05-05Merge tag 'i2c-for-6.4-rc1-part2' of ↵Linus Torvalds4-18/+30
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Some more driver bugfixes and a DT binding conversion" * tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: dt-bindings: i2c: brcm,kona-i2c: convert to YAML i2c: gxp: fix build failure without CONFIG_I2C_SLAVE i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks i2c: omap: Fix standard mode false ACK readings i2c: tegra: Fix PEC support for SMBUS block read
2023-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextJakub Kicinski4-15/+35
There's a fix which landed in net-next, pull it in along with the couple of minor cleanups. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-05Merge tag 'devicetree-fixes-for-6.4-1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add Conor Dooley as a DT binding maintainer - Swap the order of parsing /memreserve/ and /reserved-memory nodes so that the /reserved-memory nodes which have more information are handled first - Fix some property dependencies in riscv,pmu binding - Update maintainers entries on a couple of bindings * tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: add Conor as a dt-bindings maintainer dt-bindings: perf: riscv,pmu: fix property dependencies dt-bindings: xilinx: Remove Naga from memory and mtd bindings of: fdt: Scan /memreserve/ last dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
2023-05-05Merge tag 'riscv-for-linus-6.4-mw2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for hibernation - The .rela.dyn section has been moved to the init area - A fix for the SBI probing to allow for implementation-defined behavior - Various other fixes and cleanups throughout the tree * tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: include cpufeature.h in cpufeature.c riscv: Move .rela.dyn to the init sections dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support riscv: compat_syscall_table: Fixup compile warning RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename RISC-V: fix sifive and thead section mismatches in errata RISC-V: Align SBI probe implementation with spec riscv: mm: remove redundant parameter of create_fdt_early_page_table riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection RISC-V: Add arch functions to support hibernation/suspend-to-disk RISC-V: mm: Enable huge page support to kernel_page_present() function RISC-V: Factor out common code of __cpu_resume_enter() RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
2023-05-05Merge tag 'acpi-6.4-rc1-3' of ↵Linus Torvalds1-14/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during the 6.3 cycle, that turned out to do more harm than help (Hans de Goede)" * tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
2023-05-05Merge tag 'thermal-6.4-rc1-3' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix a NULL pointer dereference in the Intel powerclamp driver introduced during the 6.3 cycle and update MAINTAINERS to match recent code changes. Specifics: - Fix NULL pointer access in the Intel powerclamp thermal driver that occurs on attempts to set the cooling device state to 0 in the default configuration (Srinivas Pandruvada) - Drop the stale MAINTAINERS entry for the Intel Menlow thermal driver that has been removed recently (Lukas Bulwahn)" * tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER thermal: intel: powerclamp: Fix NULL pointer access issue
2023-05-05Merge tag 'phy-fixes-6.4-1' of ↵Linus Torvalds1-8/+4
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - Fix for mediatek driver warning for variable used uninitialized and for wrong pll math * tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: hdmi: mt8195: fix wrong pll calculus phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc
2023-05-05Merge tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds50-263/+415
Pull more drm fixes from Dave Airlie: "This is the fixes for the last couple of weeks for i915 and last 3 weeks for amdgpu, lots of them but pretty scattered around and all pretty small. amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted i915: - skl pipe source size check - mtl transcoder mask fix - DSI power on sequence fix - GuC versioning corner case fix" * tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits) drm/amdgpu: drop redundant sched job cleanup when cs is aborted drm/amd/display: filter out invalid bits in pipe_fuses drm/amd/display: Change default Z8 watermark values drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV drm/amdgpu: add a missing lock for AMDGPU_SCHED drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini() drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini drm/amdgpu: Enable doorbell selfring after resize FB BAR drm/amdgpu: Use the default reset when loading or reloading the driver drm/amdgpu: Fix mode2 reset for sienna cichlid drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep() drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info drm/i915/guc: Actually return an error if GuC version range check fails drm/amd/display: Lowering min Z8 residency time drm/amd/display: fix flickering caused by S/G mode drm/amd/display: Set min_width and min_height capability for DCN30 drm/amd/display: Isolate remaining FPU code in DCN32 drm/amd/display: Update bounding box values for DCN321 drm/amd/display: Do not clear GPINT register when releasing DMUB from reset ...
2023-05-05net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()Florian Fainelli1-1/+0
The call to phy_stop() races with the later call to phy_disconnect(), resulting in concurrent phy_suspend() calls being run from different CPUs. The final call to phy_disconnect() ensures that the PHY is stopped and suspended, too. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-05pds_core: fix mutex double unlock in error pathShannon Nelson1-8/+13
Fix a double unlock in an error handling path by unlocking as soon as the error is seen and removing unlocks in the error cleanup path. Link: https://lore.kernel.org/kernel-janitors/209a09f6-5ec6-40c7-a5ec-6260d8f54d25@kili.mountain/ Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-05net: fec: correct the counting of XDP sent framesShenwei Wang1-4/+9
In the current xdp_xmit implementation, if any single frame fails to transmit due to insufficient buffer descriptors, the function nevertheless reports success in sending all frames. This results in erroneously indicating that frames were transmitted when in fact they were dropped. This patch fixes the issue by ensureing the return value properly indicates the actual number of frames successfully transmitted, rather than potentially reporting success for all frames when some could not transmit. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Gagandeep Singh <g.singh@nxp.com> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-05bonding: add xdp_features supportLorenzo Bianconi2-0/+31
Introduce xdp_features support for bonding driver according to the slave devices attached to the master one. xdp_features is required whenever we want to xdp_redirect traffic into a bond device and then into selected slaves attached to it. Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jussi Maki <joamaki@gmail.com> Tested-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-05net: enetc: check the index of the SFI rather than the handleWei Fang1-1/+1
We should check whether the current SFI (Stream Filter Instance) table is full before creating a new SFI entry. However, the previous logic checks the handle by mistake and might lead to unpredictable behavior. Fixes: 888ae5a3952b ("net: enetc: add tc flower psfp offload driver") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-05virtio_net: suppress cpu stall when free_unused_bufsWenliang Wang1-0/+2
For multi-queue and large ring-size use case, the following error occurred when free_unused_bufs: rcu: INFO: rcu_sched self-detected stall on CPU. Fixes: 986a4f4d452d ("virtio_net: multiqueue support") Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-05ice: block LAN in case of VF to VF offloadMichal Swiatkowski1-1/+2
VF to VF traffic shouldn't go outside. To enforce it, set only the loopback enable bit in case of all ingress type rules added via the tc tool. Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reported-by: Sujai Buvaneswaran <Sujai.Buvaneswaran@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-05net: dsa: mt7530: fix network connectivity with multiple CPU portsArınç ÜNAL1-3/+7
On mt753x_cpu_port_enable() there's code that enables flooding for the CPU port only. Since mt753x_cpu_port_enable() runs twice when both CPU ports are enabled, port 6 becomes the only port to forward the frames to. But port 5 is the active port, so no frames received from the user ports will be forwarded to port 5 which breaks network connectivity. Every bit of the BC_FFP, UNM_FFP, and UNU_FFP bits represents a port. Fix this issue by setting the bit that corresponds to the CPU port without overwriting the other bits. Clear the bits beforehand only for the MT7531 switch. According to the documents MT7621 Giga Switch Programming Guide v0.3 and MT7531 Reference Manual for Development Board v1.0, after reset, the BC_FFP, UNM_FFP, and UNU_FFP bits are set to 1 for MT7531, 0 for MT7530. The commit 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports") silently changed the method to set the bits on the MT7530_MFC. Instead of clearing the relevant bits before mt7530_cpu_port_enable() which runs under a for loop, the commit started doing it on mt7530_cpu_port_enable(). Back then, this didn't really matter as only a single CPU port could be used since the CPU port number was hardcoded. The driver was later changed with commit 1f9a6abecf53 ("net: dsa: mt7530: get cpu-port via dp->cpu_dp instead of constant") to retrieve the CPU port via dp->cpu_dp. With that, this silent change became an issue for when using multiple CPU ports. Fixes: 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-05net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621Arınç ÜNAL1-2/+2
The multi-chip module MT7530 switch with a 40 MHz oscillator on the MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using trgmii. This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL, hence using the ncpo1 value, 0x0780. My testing shows this value works on Unielec U7621-06, Bartel's testing shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices tested have got 40 MHz oscillators. Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code whilst 150 MHz PLL don't. Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz oscillator on the said MT7621 SoCs works fine because the ncpo1 value defined for it is for 125 MHz PLL. Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL ncpo1 values for both oscillator frequencies. Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/81d24bbce7d99524d0771a8bdb2d6663e4eb4faa/u-boot-mt/drivers/net/rt2880_eth.c#L2195 Fixes: 7ef6f6f8d237 ("net: dsa: mt7530: Add MT7621 TRGMII mode support") Tested-by: Bartel Eerdekens <bartel.eerdekens@constell8.be> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-04Merge tag 'linux-watchdog-6.4-rc1' of ↵Linus Torvalds47-355/+827
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add watchdog driver for StarFive JH7100 and JH7110 Soc - Add Rockchip RK3588 devices - Add Qualcom IPQ5332 APSS, QCM2290 KPSS and SM6115 SoC devices - Add Mediatke MT8365 and MT6735 devices - Watchdog-core: Always set WDOG_HW_RUNNING when starting watchdog - Convert watchdog platform drivers to return void on the remove callback - Convert to devm_clk_get_enabled() helpers - ... and other small fixes and improvements * tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (72 commits) watchdog: dw_wdt: Simplify clk management watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe() watchdog: starfive: Fix the warning of starfive_wdt_match watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled MAINTAINERS: Add fragment for Xilinx watchdog driver watchdog: menz069_wdt: fix timeout setting watchdog: menz069_wdt: fix watchdog initialisation dt-bindings: watchdog: alphascale-asm9260: convert to DT schema watchdog: loongson1_wdt: Implement restart handler dt-bindings: watchdog: Document Qualcomm SM6115 watchdog dt-bindings: watchdog: realtek,otto-wdt: simplify requiring interrupt-names dt-bindings: watchdog: toshiba,visconti-wdt: simplify with unevaluatedProperties dt-bindings: watchdog: fsl-imx7ulp-wdt: simplify with unevaluatedProperties dt-bindings: watchdog: arm,sp805: drop unneeded minItems dt-bindings: watchdog: drop duplicated GPIO watchdog bindings dt-bindings: reset: Add binding for MediaTek MT6735 TOPRGU/WDT drivers: watchdog: Add StarFive Watchdog driver dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110 dt-bindings: watchdog: indentation, quotes and white-space cleanup watchdog: ebc-c384_wdt: Mark status as orphaned ...
2023-05-05Merge tag 'drm-intel-next-fixes-2023-05-04-1' of ↵Dave Airlie6-38/+20
git://anongit.freedesktop.org/drm/drm-intel into drm-next Add missing GPU transcoder masks for MTL and fix DSI power on sequence for Nextbook Ares 8A. Fix GuC version corner case. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZFOskabVuN45dNaA@jlahtine-mobl.ger.corp.intel.com
2023-05-05Merge tag 'amd-drm-fixes-6.4-2023-05-03' of ↵Dave Airlie14-53/+78
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.4-2023-05-03: amdgpu: - GPU reset fixes - Doorbell fix when resizing BARs - Fix spurious warnings in gmc - Locking fix for AMDGPU_SCHED IOCTL - SR-IOV fix - DCN 3.1.4 fix - DCN 3.2 fix - Fix job cleanup when CS is aborted Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230504034018.7950-1-alexander.deucher@amd.com
2023-05-05Merge tag 'drm-intel-next-fixes-2023-04-27' of ↵Dave Airlie1-0/+17
git://anongit.freedesktop.org/drm/drm-intel into drm-next One cc stable for pipe source size check on SKL+ Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZEpbSG1ZOSVqzGLx@jlahtine-mobl.ger.corp.intel.com
2023-05-05Merge tag 'amd-drm-fixes-6.4-2023-04-26' of ↵Dave Airlie31-172/+300
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.4-2023-04-26: amdgpu: - SR-IOV fixes - DCN 3.2 fixes - DC mclk handling fixes - eDP fixes - SubVP fixes - HDCP regression fix - DSC fixes - DC FP fixes - DCN 3.x fixes - Display flickering fix when switching between vram and gtt - Z8 power saving fix - Fix hang when skipping modeset Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427033012.7668-1-alexander.deucher@amd.com
2023-05-04thermal: intel: powerclamp: Fix NULL pointer access issueSrinivas Pandruvada1-0/+4
If cur_state for the powerclamp cooling device is set to the default minimum state of 0, without setting first to cur_state > 0, this results in NULL pointer access. This NULL pointer access happens in the powercap core idle-inject function idle_inject_set_duration() as there is no NULL check for idle_inject_device pointer. This pointer must be allocated by calling idle_inject_register() or idle_inject_register_full(). In the function powerclamp_set_cur_state(), idle_inject_device pointer is allocated only when the cur_state > 0. But setting 0 without changing to any other state, idle_inject_set_duration() will be called with a NULL idle_inject_device pointer. To address this, just return from powerclamp_set_cur_state() if the current cooling device state is the same as the last one. Since the power-up default cooling device state is 0, changing the state to 0 again here will return without calling idle_inject_set_duration(). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: 8526eb7fc75a ("thermal: intel: powerclamp: Use powercap idle-inject feature") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=217386 Tested-by: Risto A. Paju <teknohog@iki.fi> Cc: 6.3+ <stable@kernel.org> # 6.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-04ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530Hans de Goede1-14/+0
Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530. This was intended to help users of the (unsupported) Nvidia binary driver, but this has been reported to cause backlight control issues for users who have the gfx configured in hybrid (dual-GPU) mode, so drop this. The Nvidia binary driver should call acpi_video_register_backlight() when necessary and this has been reported to Nvidia. Until this is fixed Nvidia binary driver users can work around this by passing "acpi_backlight=video" on the kernel commandline (with the latest 6.1.y or newer stable series, kernels < 6.1.y don't need this). Fixes: a5b2781dcab2 ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530") Reported-by: Русев Путин <rockeraliexpress@gmail.com> Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/ Cc: 6.1+ <stable@vger.kernel.org> # 6.1+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-04phy: mediatek: hdmi: mt8195: fix wrong pll calculusGuillaume Ranquet1-2/+2
The clock rate calculus in mtk_hdmi_pll_calc() was wrong when it has been replaced by 'div_u64'. Fix the issue by multiplying the values in the denominator instead of dividing them. Fixes: 45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-2-bbad62e64321@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-04phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calcGuillaume Ranquet1-6/+2
The ret variable in mtk_hdmi_pll_calc() was used unitialized as reported by the kernel test robot. Fix the issue by removing the variable altogether and testing out the return value of mtk_hdmi_pll_set_hw() Fixes: 45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-1-bbad62e64321@baylibre.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-04io_uring: Pass whole sqe to commandsBreno Leitao2-14/+14
Currently uring CMD operation relies on having large SQEs, but future operations might want to use normal SQE. The io_uring_cmd currently only saves the payload (cmd) part of the SQE, but, for commands that use normal SQE size, it might be necessary to access the initial SQE fields outside of the payload/cmd block. So, saves the whole SQE other than just the pdu. This changes slightly how the io_uring_cmd works, since the cmd structures and callbacks are not opaque to io_uring anymore. I.e, the callbacks can look at the SQE entries, not only, in the cmd structure. The main advantage is that we don't need to create custom structures for simple commands. Creates io_uring_sqe_cmd() that returns the cmd private data as a null pointer and avoids casting in the callee side. Also, make most of ublk_drv's sqe->cmd priv structure into const, and use io_uring_sqe_cmd() to get the private structure, removing the unwanted cast. (There is one case where the cast is still needed since the header->{len,addr} is updated in the private structure) Suggested-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20230504121856.904491-3-leitao@debian.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-04mailbox: qcom-apcs-ipc: do not grow the of_device_idKrzysztof Kozlowski1-5/+6
Re-organize the compatible devices and add a comment to avoid unneeded of_device_id growth with every new SoC. These devices have quite a lot of similarities and they can use only one compatible fallback for driver binding. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-05-04mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIREConor Dooley1-1/+1
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the Microchip FPGA mailbox driver to use the new symbol. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-05-04mailbox: bcm-pdc: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/mailbox/bcm-pdc-mailbox.c:1474:34: error: ‘pdc_mbox_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-05-04mailbox: rockchip: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/mailbox/rockchip-mailbox.c:158:34: error: ‘rockchip_mbox_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-05-04mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()Lee Jones1-0/+7
If a user can make copy_from_user() fail, there is a potential for UAF/DF due to a lack of locking around the allocation, use and freeing of the data buffers. This issue is not theoretical. I managed to author a POC for it: BUG: KASAN: double-free in kfree+0x5c/0xac Free of addr ffff29280be5de00 by task poc/356 CPU: 1 PID: 356 Comm: poc Not tainted 6.1.0-00001-g961aa6552c04-dirty #20 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x64/0x80 print_report+0x188/0x48c kasan_report_invalid_free+0xa0/0xc0 ____kasan_slab_free+0x174/0x1b0 __kasan_slab_free+0x18/0x24 __kmem_cache_free+0x130/0x2e0 kfree+0x5c/0xac mbox_test_message_write+0x208/0x29c full_proxy_write+0x90/0xf0 vfs_write+0x154/0x440 ksys_write+0xcc/0x180 __arm64_sys_write+0x44/0x60 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x40/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xf4/0x120 el0t_64_sync+0x18c/0x190 Allocated by task 356: kasan_save_stack+0x3c/0x70 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x34 __kasan_kmalloc+0xb8/0xc0 kmalloc_trace+0x58/0x70 mbox_test_message_write+0x6c/0x29c full_proxy_write+0x90/0xf0 vfs_write+0x154/0x440 ksys_write+0xcc/0x180 __arm64_sys_write+0x44/0x60 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x40/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xf4/0x120 el0t_64_sync+0x18c/0x190 Freed by task 357: kasan_save_stack+0x3c/0x70 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x5c ____kasan_slab_free+0x13c/0x1b0 __kasan_slab_free+0x18/0x24 __kmem_cache_free+0x130/0x2e0 kfree+0x5c/0xac mbox_test_message_write+0x208/0x29c full_proxy_write+0x90/0xf0 vfs_write+0x154/0x440 ksys_write+0xcc/0x180 __arm64_sys_write+0x44/0x60 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x40/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xf4/0x120 el0t_64_sync+0x18c/0x190 Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-05-04mailbox: mailbox-test: Explicitly include header for spinlock supportLee Jones1-0/+1
Presently the support appears to be implied. Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2023-05-03drm/amdgpu: drop redundant sched job cleanup when cs is abortedGuchun Chen1-10/+3
Once command submission failed due to userptr invalidation in amdgpu_cs_submit, legacy code will perform cleanup of scheduler job. However, it's not needed at all, as former commit has integrated job cleanup stuff into amdgpu_job_free. Otherwise, because of double free, a NULL pointer dereference will occur in such scenario. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457 Fixes: f7d66fb2ea43 ("drm/amdgpu: cleanup scheduler job initialization v2") Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-05-03drm/amd/display: filter out invalid bits in pipe_fusesSamson Tam2-2/+18
[Why] Reading pipe_fuses from register may have invalid bits set, which may affect the num_pipes erroneously. [How] Add read_pipes_fuses() call and filter bits based on expected number of pipes. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-05-03drm/amd/display: Change default Z8 watermark valuesLeo Chen1-2/+2
[Why & How] Previous Z8 watermark values were causing flickering and OTC underflow. Updating Z8 watermark values based on the measurement. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-03drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOVHorace Chen1-4/+1
[Why] This WPTR_POLL_ENABLE is a hardware contigious polling which will cause FCLK and UCLK to keep on a high level. Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by firmware. So to save power, SR-IOV also needs to disable this bit Signed-off-by: Horace Chen <horace.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-03drm/amdgpu: add a missing lock for AMDGPU_SCHEDChia-I Wu1-1/+5
mgr->ctx_handles should be protected by mgr->lock. v2: improve commit message v3: add a Fixes tag Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Fixes: 52c6a62c64fa ("drm/amdgpu: add interface for editing a foreign process's priority v3") Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-03drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()Hamza Mahfooz1-1/+0
As made mention of in commit 08c677cb0b43 ("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104fa ("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it from gmc_v9_0_hw_fini(). Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-05-03drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_finiHoratio Zhang1-1/+0
The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v10_0_hw_fini, which also leads to the call trace. [ 82.340264] Call Trace: [ 82.340265] <TASK> [ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu] [ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu] [ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu] [ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu] [ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu] [ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 82.341529] process_one_work+0x21d/0x3f0 [ 82.341535] worker_thread+0x1fa/0x3c0 [ 82.341538] ? process_one_work+0x3f0/0x3f0 [ 82.341540] kthread+0xff/0x130 [ 82.341544] ? kthread_complete_and_exit+0x20/0x20 [ 82.341547] ret_from_fork+0x22/0x30 Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset") Cc: stable@vger.kernel.org
2023-05-03drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_finiHoratio Zhang1-1/+0
The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v11_0_hw_fini, which also leads to the call trace. [ 102.980303] Call Trace: [ 102.980303] <TASK> [ 102.980304] gmc_v11_0_hw_fini+0x54/0x90 [amdgpu] [ 102.980357] gmc_v11_0_suspend+0xe/0x20 [amdgpu] [ 102.980409] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu] [ 102.980459] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 102.980520] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu] [ 102.980573] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu] [ 102.980687] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 102.980740] process_one_work+0x21f/0x3f0 [ 102.980741] worker_thread+0x200/0x3e0 [ 102.980742] ? process_one_work+0x3f0/0x3f0 [ 102.980743] kthread+0xfd/0x130 [ 102.980743] ? kthread_complete_and_exit+0x20/0x20 [ 102.980744] ret_from_fork+0x22/0x30 Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset") Cc: stable@vger.kernel.org
2023-05-03drm/amdgpu: Enable doorbell selfring after resize FB BARShane Xiao3-30/+41
[Why] The selfring doorbell aperture will change when resize FB BAR successfully during gmc sw init, we should reorder the sequence of enabling doorbell selfring aperture. [How] Move enable_doorbell_selfring_aperture from *_common_hw_init to *_common_late_init. This fixes the potential issue that GPU ring its own doorbell when this device is in translated mode when iommu is on. v2: Remove *_enable_doorbell_aperture functions (Christian) v3: Add comments to note that why we need enable doorbell selfring late (Christian) Signed-off-by: Shane Xiao <shane.xiao@amd.com> Signed-off-by: Aaron Liu <aaron.liu@amd.com> Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Christian K�nig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-03drm/amdgpu: Use the default reset when loading or reloading the driverlyndonli1-0/+7
Below call trace and errors are observed when reloading amdgpu driver with the module parameter reset_method=3. It should do a default reset when loading or reloading the driver, regardless of the module parameter reset_method. v2: add comments inside and modify commit messages. [ +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed and response status is (0x0) [ +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc [ +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed! [ +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to clear memory with ring turned off. [ +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu] [ +0.000004] Call Trace: [ +0.000003] <TASK> [ +0.000008] ttm_bo_release+0x2c4/0x330 [amdttm] [ +0.000026] amdttm_bo_put+0x3c/0x70 [amdttm] [ +0.000020] amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu] [ +0.000728] psp_v11_0_ring_destroy+0x34/0x60 [amdgpu] [ +0.000826] psp_hw_init+0xe7/0x2f0 [amdgpu] [ +0.000813] amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu] [ +0.000731] amdgpu_device_init.cold+0x108e/0x2002 [amdgpu] [ +0.001071] ? do_pci_enable_device+0xe1/0x110 [ +0.000011] amdgpu_driver_load_kms+0x1a/0x160 [amdgpu] [ +0.000729] amdgpu_pci_probe+0x179/0x3a0 [amdgpu] Signed-off-by: lyndonli <Lyndon.Li@amd.com> Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 18:27:08 +0000