summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-11-05watchdog: s3c2410: convert to use the watchdog frameworkWolfram Sang2-139/+38
Make this driver a user of the watchdog framework and remove now centrally handled parts. Tested on a mini2440. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearingWim Van Sebroeck1-6/+13
Redhat Bugzilla: Bug 727875 - TCO_EN bit is disabled by TCO driver Jiri Slaby: 28d41f53f broke temperature sensors on a ICH10 chipset The iTCO_wdt driver disables the SMI. This breaks good working of newer hardware. The disabling of the SMI by the TCO logic dates back from the i810-tco driver from Nils Faerber (around 28 July 2000). The reason for this was that some BIOSes install handlers reset or disable the watchdog timer instead of resetting the system. The trick to fix this was to disable the SMI (by clearing the SMI_TCO_EN bit of the SMI_EN register) to prevent this from happening. This however has strange effects on newer hardware. So we are in a situation that a fix for broken old hardware affects newer hardware. The correct solution is to make this fix an option (with the new module parameter: turn_SMI_watchdog_clear_off) so that the default behaviour is the unfixed version. the next patch will be to move this in the start and stop functions of the driver and to add a new module parameter for the global_smi_en bit and to get rid of the vendor_support code. This fix can have an effect on old (typical ICH & ICH2 chipsets) motherboards that have a broken BIOS implementation concerning TCO logic. In these case the module parameter turn_SMI_watchdog_clear_off=1 will need to be added. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05watchdog: Add WDIOC_GETTIMELEFT ioctl support to w83627 watchdog driverGreg Lee1-6/+27
Add WDIOC_GETTIMELEFT ioctl allowing you to check how much time is left on the watchdog counter before a reset occurs. Signed-off-by: Greg Lee <glee [at] swspec.com> Signed-off-by: Padraig Brady <P@draigbrady.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@google.com>
2011-11-05watchdog: irq: Remove IRQF_DISABLEDYong Zhang6-8/+7
This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05watchdog: Octeon: Mark octeon_wdt interrupt as IRQF_NO_THREADVenkat Subbiah1-1/+1
This is to exclude it from force threading to allow RT patch set to work. The watchdog timers are per-CPU and the addresses of register that reset the timer are calculated based on the current CPU. Therefore we cannot allow it to run on a thread on a different CPU. Also we only do a single register write, which is much faster than scheduling a handler thread. And while on this line remove IRQF_DISABLED as this flag is a NOP. Signed-off-by: Venkat Subbiah<venkat.subbiah@cavium.com> Acked-by: David Daney<david.daney@cavium.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05watchdog: sc520_wdt: Remove unnecessary cast.Sean Young1-1/+1
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-04Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds20-582/+967
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-04Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds10-117/+576
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits) virtio-blk: use ida to allocate disk index hpsa: add small delay when using PCI Power Management to reset for kump cciss: add small delay when using PCI Power Management to reset for kump xen/blkback: Fix two races in the handling of barrier requests. xen/blkback: Check for proper operation. xen/blkback: Fix the inhibition to map pages when discarding sector ranges. xen/blkback: Report VBD_WSECT (wr_sect) properly. xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests. xen-blkfront: plug device number leak in xlblk_init() error path xen-blkfront: If no barrier or flush is supported, use invalid operation. xen-blkback: use kzalloc() in favor of kmalloc()+memset() xen-blkback: fixed indentation and comments xen-blkfront: fix a deadlock while handling discard response xen-blkfront: Handle discard requests. xen-blkback: Implement discard requests ('feature-discard') xen-blkfront: add BLKIF_OP_DISCARD and discard request struct drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd() drivers/block/loop.c: emit uevent on auto release drivers/block/cpqarray.c: use pci_dev->revision loop: always allow userspace partitions and optionally support automatic scanning ... Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-04Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds21-236/+106
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-11-04Merge branch 'for-linus' of ↵Linus Torvalds6-27/+64
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Fix panic in RC error flushing logic IB/iser: DMA unmap TX bufs used for iSCSI/iSER headers IB/iser: Use separate buffers for the login request/response IB/mthca: Fix buddy->num_free allocation size
2011-11-04Merge branches 'iser', 'mthca' and 'qib' into for-nextRoland Dreier2-8/+4
2011-11-04IB/qib: Fix panic in RC error flushing logicMike Marciniszyn1-7/+3
The following panic can occur when flushing a QP: RIP: 0010:[<ffffffffa0168e8b>] [<ffffffffa0168e8b>] qib_send_complete+0x3b/0x190 [ib_qib] RSP: 0018:ffff8803cdc6fc90 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8803d84ba000 RCX: 0000000000000000 RDX: 0000000000000005 RSI: ffffc90015a53430 RDI: ffff8803d84ba000 RBP: ffff8803cdc6fce0 R08: ffff8803cdc6fc90 R09: 0000000000000001 R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8803d84ba0c0 R13: ffff8803d84ba5cc R14: 0000000000000800 R15: 0000000000000246 FS: 0000000000000000(0000) GS:ffff880036600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000034 CR3: 00000003e44f9000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qib/0 (pid: 1350, threadinfo ffff8803cdc6e000, task ffff88042728a100) Stack: 53544c5553455201 0000000100000005 0000000000000000 ffff8803d84ba000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000001 ffff8803cdc6fd30 ffffffffa0165d7a Call Trace: [<ffffffffa0165d7a>] qib_make_rc_req+0x36a/0xe80 [ib_qib] [<ffffffffa0165a10>] ? qib_make_rc_req+0x0/0xe80 [ib_qib] [<ffffffffa01698b3>] qib_do_send+0xf3/0xb60 [ib_qib] [<ffffffff814db757>] ? thread_return+0x4e/0x777 [<ffffffffa01697c0>] ? qib_do_send+0x0/0xb60 [ib_qib] [<ffffffff81088bf0>] worker_thread+0x170/0x2a0 [<ffffffff8108e530>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81088a80>] ? worker_thread+0x0/0x2a0 [<ffffffff8108e1c6>] kthread+0x96/0xa0 [<ffffffff8100c1ca>] child_rip+0xa/0x20 [<ffffffff8108e130>] ? kthread+0x0/0xa0 [<ffffffff8100c1c0>] ? child_rip+0x0/0x20 RIP [<ffffffffa0168e8b>] qib_send_complete+0x3b/0x190 [ib_qib] The RC error state flush logic in qib_make_rc_req() could return all of the acked wqes and potentially have emptied the queue. It would then unconditionally try return a flush completion via qib_send_complete() for an invalid wqe, or worse a valid one that is not queued. The panic results when the completion code tries to maintain an MR reference count for a NULL MR. This fix modifies logic to only send one completion per qib_make_rc_req() call and changing the completion status from IB_WC_SUCCESS to IB_WC_WR_FLUSH_ERR as the completions progress. The outer loop will call as many times as necessary to flush the queue. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-04IB/iser: DMA unmap TX bufs used for iSCSI/iSER headersOr Gerlitz2-4/+8
The current driver never does DMA unmapping on these buffers. Fix that by adding DMA unmapping to the task cleanup callback, and DMA mapping to the task init function (drop the headers_initialized micro-optimization). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-04IB/iser: Use separate buffers for the login request/responseOr Gerlitz3-15/+52
The driver counted on the transactional nature of iSCSI login/text flows and used the same buffer for both the request and the response. We also went further and did DMA mapping only once, with DMA_FROM_DEVICE, which violates the DMA mapping API. Fix that by using different buffers, one for requests and one for responses, and use the correct DMA mapping direction for each. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds196-3664/+9875
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (144 commits) [media] saa7134.h: Suppress compiler warnings when CONFIG_VIDEO_SAA7134_RC is not set [media] it913x [VER 1.07] Support for single ITE 9135 devices [media] Support for Terratec G1 [media] cx25821: off by one in cx25821_vidioc_s_input() [media] media: tea5764: reconcile Kconfig symbol and macro [media] omap_vout: Add poll() support [media] omap3isp: preview: Add crop support on the sink pad [media] omap3isp: preview: Rename min/max input/output sizes defines [media] omap3isp: preview: Remove horizontal averager support [media] omap3isp: Report the ISP revision through the media controller API [media] omap3isp: ccdc: remove redundant operation [media] omap3isp: Fix memory leaks in initialization error paths [media] omap3isp: Add missing mutex_destroy() calls [media] omap3isp: Move *_init_entities() functions to the init/cleanup section [media] omap3isp: Move media_entity_cleanup() from unregister() to cleanup() [media] MFC: Change MFC firmware binary name [media] vb2: add vb2_get_unmapped_area in vb2 core [media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor [media] v4l: Add AUTO option for the V4L2_CID_POWER_LINE_FREQUENCY control [media] media: ov6650: stylistic improvements ...
2011-11-04Merge branch 'hwmon-for-linus' of ↵Linus Torvalds24-396/+424
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83627ehf) Add support for the W83627UHG hwmon: (w83627ehf) Clean up probe function hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types hwmon: Use i2c_smbus_{read,write}_word_swapped hwmon: (smsc47b397) Fix checkpatch errors hwmon: (lm90) Make code more readable hwmon: (lm90) Fix warnings hwmon: (ibmaem) Avoid repeated memory allocations hwmon: (ibmaem) Make instance initializations independent hwmon: (ibmaem) Fix error paths hwmon: (lm73) Make detection less problematic hwmon: Avoid building drivers for powerpc that read/write ISA addresses
2011-11-04Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-12/+23
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: dt: add empty of_machine_is_compatible ahci: add DT binding for Calxeda AHCI controller dt/platform: minor cleanup dt: add empty of_alias_get_id() for non-dt builds
2011-11-04hwmon: (w83627ehf) Add support for the W83627UHGJean Delvare2-28/+125
This is essentially a stripped down version of the W83627DHG. Noticeable difference is that it is still powered with +5V, as older models, even though the ADC resolution is 8 mV as newer models have. Thanks to Ulf Bruman (Saab Group) for doing all the testing. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (w83627ehf) Clean up probe functionJean Delvare1-21/+32
The probe function has grown pretty large, I think it's time for some cleanups, starting with these two simple ones: * Move temp3/in6 check for the W83667HG later in the function, where it is done for all other chip types. * Move temperature register setting to a separate function, to avoid code duplication. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor typesJean Delvare1-1/+8
When temperature sources are PECI or AMD-SI agents, it makes no sense to report their type as diode or thermistor. Instead we must report their digital nature. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: Use i2c_smbus_{read,write}_word_swappedJean Delvare19-234/+115
Make use of the new i2c_smbus_{read,write}_word_swapped functions. This makes the driver code more compact and readable. It also ensures proper error handling. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Dirk Eibach <eibach@gdsys.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com>
2011-11-04hwmon: (smsc47b397) Fix checkpatch errorsJean Delvare1-5/+8
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (lm90) Make code more readableJean Delvare1-74/+69
Clean up the code to make it more readable: * Remove reg_ and new_ prefixes from variable names, they made the names longer, causing extra line breaks, while not adding much value. * Introduce struct device dev* = &client->dev in two functions, to avoid repeating client->dev everywhere in these functions. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (lm90) Fix warningsJean Delvare1-15/+16
With some configuration option combinations, we get the following warnings: drivers/hwmon/lm90.c: In function 'lm90_detect': drivers/hwmon/lm90.c:1114: warning: 'chip_id' may be used uninitialized in this function drivers/hwmon/lm90.c:1114: warning: 'reg_config1' may be used uninitialized in this function drivers/hwmon/lm90.c:1114: warning: 'reg_convrate' may be used uninitialized in this function drivers/hwmon/lm90.c:1187: warning: 'reg_emerg2' may be used uninitialized in this function drivers/hwmon/lm90.c:1187: warning: 'reg_status2' may be used uninitialized in this function We can solve these easily by reading the register values first and checking for errors later. These errors should be very rare, even in the case of failed detection, so this change has no impact on performance. And this makes checkpatch.pl happier. Reported-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (ibmaem) Avoid repeated memory allocationsJean Delvare1-8/+20
Preallocate a buffer for the response to sensor reads, and reuse it for each read instead of allocating a new one each time. This should be faster and should also avoid memory fragmentation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (ibmaem) Make instance initializations independentJean Delvare1-10/+2
There is no good reason that I can see why the failure to initialize one instance should prevent other instances from being initialized. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (ibmaem) Fix error pathsJean Delvare1-8/+12
I am under the impression that error paths in functions aem_init_aem1_inst() and aem_init_aem2_inst() are incorrect. In several cases, the function returns 0 on error, which I suspect is not intended. Fix this by properly tracking error codes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04hwmon: (lm73) Make detection less problematicJean Delvare1-4/+18
Word reads can cause trouble with some I2C devices, so do as much detection as we can using only byte reads, and only use a word read in the end to confirm the positive match. Also properly handle read errors. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Robert Casanova <robertcasanova@nanometrics.ca>
2011-11-04hwmon: Avoid building drivers for powerpc that read/write ISA addressesDean Nelson1-2/+13
A modprobe of hwmon drivers that read/write ISA addresses on a powerpc results in a kernel Oops. These reads/writes are being done via the inb()/in_8() and outb()/out_8() macros. Prevent these drivers from being built for powerpc. Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds28-135/+182
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) be2net: Add detect UE feature for Lancer be2net: Prevent CQ full condition for Lancer be2net: Fix disabling multicast promiscous mode be2net: Fix endian issue in RX filter command af_packet: de-inline some helper functions MAINTAINERS: Add can-gw include to maintained files net: Add back alignment for size for __alloc_skb net: add missing bh_unlock_sock() calls l2tp: fix race in l2tp_recv_dequeue() ixgbevf: Update release version ixgbe: DCB, return max for IEEE traffic classes ixgbe: fix reading of the buffer returned by the firmware ixgbe: Fix compiler warnings ixgbe: fix smatch splat due to missing NULL check ixgbe: fix disabling of Tx laser at probe ixgbe: Fix link issues caused by a reset while interface is down igb: Fix for I347AT4 PHY cable length unit detection e100: make sure vlan support isn't advertised on old adapters e1000e: demote a debugging WARN to a debug log message net: fix typo in drivers/net/ethernet/xilinx/ll_temac_main.c ...
2011-11-03be2net: Add detect UE feature for LancerPadmanabh Ratnakar3-21/+42
Add code to detect UE in case of Lancer. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-03be2net: Prevent CQ full condition for LancerPadmanabh Ratnakar1-4/+4
Indicate to HW that the CQ is cleaned up before posting new RX buffers. This prevents the HW to go into CQ full error condition. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-03be2net: Fix disabling multicast promiscous modePadmanabh Ratnakar1-0/+7
If user tries to disable multicast promiscous mode, the adapter remains in this mode as resetting the multicast promiscous mode was missing in RX filter command. Fixed this. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-03be2net: Fix endian issue in RX filter commandPadmanabh Ratnakar1-1/+1
Use cpu_to_le32() for mcast_num field in RX filter command as this field is of type u32. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-03IB/mthca: Fix buddy->num_free allocation sizeRoland Dreier1-1/+1
The num_free field of mthca_buddy has a type of array of unsigned int while it was allocated as an array of pointers. On 64-bit platforms this allocates twice more than required. Fix this by allocating the correct size for the type. This is the same bug just fixed in mlx4 by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-03ahci: add DT binding for Calxeda AHCI controllerRob Herring1-0/+7
Add devicetree match table to ahci platform driver for Calxeda Highbank AHCI controller. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org
2011-11-03dt/platform: minor cleanupOlof Johansson1-12/+16
* Correct description of of_platform_bus_create to match implementation * Remove a level of indentation in of_dev_lookup Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-11-03[media] saa7134.h: Suppress compiler warnings when CONFIG_VIDEO_SAA7134_RC ↵Timo Kokkonen1-6/+6
is not set If the said config optio is not set, the compiler will spill out many warnings about statements with no effect, such as: Casting the zero to void will cure the warning. Signed-off-by: Timo Kokkonen <kaapeli@itanic.dy.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] it913x [VER 1.07] Support for single ITE 9135 devicesMalcolm Priestley2-27/+80
Support for single ITE 9135 device. Only single devices have been tested. Dual ITE 9135 devices should work, but have not been tested. TODOs support for ver 2 chip config for other tuner types. rework of firmware file. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] Support for Terratec G1Teka1-0/+2
Hi, This is a little patch to support Terratec G1 (based on Terratec Grabby). It works perfectly on my pc (Ubuntu 11.04 / Kernel 2.6.38). Best regards, Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] cx25821: off by one in cx25821_vidioc_s_input()Dan Carpenter2-2/+3
If "i" is 2 then when we call cx25821_video_mux() we'd end up going past the end of the cx25821_boards[dev->board]->input[]. The INPUT() macro obfuscates what's going on in that function so it's a bit hard to follow. And as Mauro points out the hard coded 2 is not very helpful. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] media: tea5764: reconcile Kconfig symbol and macroPaul Bolle1-1/+3
The Kconfig symbol RADIO_TEA5764_XTAL is unused. The code does use a RADIO_TEA5764_XTAL macro, but does that rather peculiar. But there seems to be a way to keep both. (The easiest way out would be to rip out both the Kconfig symbol and the macro.) Note there's also a module parameter 'use_xtal' to influence all this. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] omap_vout: Add poll() supportLaurent Pinchart1-0/+10
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] omap3isp: preview: Add crop support on the sink padLaurent Pinchart2-66/+198
The crop rectangle takes the preview engine internal cropping requirements into account. The smallest allowable margins are 14 columns and 8 rows when reading from memory, and 18 columns and 8 rows when processing data on the fly from the CCDC. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] omap3isp: preview: Rename min/max input/output sizes definesLaurent Pinchart2-19/+17
The macros that define the minimum/maximum input and output sizes are defined in seperate files and have no consistent naming. In preparation for preview engine cropping support, move them all to isppreview.c and rename them to PREV_{MIN|MAX}_{IN|OUT}_{WIDTH|HEIGHT}*. Remove unused and/or unneeded local variables that store the maximum output width. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] omap3isp: preview: Remove horizontal averager supportLaurent Pinchart2-23/+2
The horizontal averager isn't used and will get in the way when implementing cropping support on the input pad. Remove it, it can be added back later if needed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] omap3isp: Report the ISP revision through the media controller APILaurent Pinchart1-0/+1
Set the media_device::hw_revision field to the ISP revision number. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] omap3isp: ccdc: remove redundant operationGuennadi Liakhovetski1-1/+1
Trivial arithmetics clean up. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] omap3isp: Fix memory leaks in initialization error pathsLaurent Pinchart6-47/+74
Make sure all modules init functions clean up after themselves in case of error. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-03[media] omap3isp: Add missing mutex_destroy() callsLaurent Pinchart4-0/+7
Mutexes must be destroyed with mutex_destroy(). Add missing calls in the modules cleanup handlers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 07:51:05 +0000