summaryrefslogtreecommitdiff
path: root/drivers/virtio
AgeCommit message (Collapse)AuthorFilesLines
2023-06-27virtio: allow caller to override device DMA mask in vp_modernShannon Nelson1-1/+2
To add a bit of vendor flexibility with various virtio based devices, allow the caller to specify a different DMA mask. This adds a dma_mask field to struct virtio_pci_modern_device. If defined by the driver, this mask will be used in a call to dma_set_mask_and_coherent() instead of the traditional DMA_BIT_MASK(64). This allows limiting the DMA space on vendor devices with address limitations. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230519215632.12343-3-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-27virtio: allow caller to override device id in vp_modernShannon Nelson1-11/+19
To add a bit of vendor flexibility with various virtio based devices, allow the caller to check for a different device id. This adds a function pointer field to struct virtio_pci_modern_device to specify an override device id check. If defined by the driver, this function will be called to check that the PCI device is the vendor's expected device, and will return the found device id to be stored in mdev->id.device. This allows vendors with alternative vendor device ids to use this library on their own device BAR. Note: A lot of the diff in this is simply indenting the existing code into an else block. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230519215632.12343-2-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-27virtio_pci: Optimize virtio_pci_device structure sizeFeng Liu1-3/+4
Improve the size of the virtio_pci_device structure, which is commonly used to represent a virtio PCI device. A given virtio PCI device can either of legacy type or modern type, with the struct virtio_pci_legacy_device occupying 32 bytes and the struct virtio_pci_modern_device occupying 88 bytes. Make them a union, thereby save 32 bytes of memory as shown by the pahole tool. This improvement is particularly beneficial when dealing with numerous devices, as it helps conserve memory resources. Before the modification, pahole tool reported the following: struct virtio_pci_device { [...] struct virtio_pci_legacy_device ldev; /* 824 32 */ /* --- cacheline 13 boundary (832 bytes) was 24 bytes ago --- */ struct virtio_pci_modern_device mdev; /* 856 88 */ /* XXX last struct has 4 bytes of padding */ [...] /* size: 1056, cachelines: 17, members: 19 */ [...] }; After the modification, pahole tool reported the following: struct virtio_pci_device { [...] union { struct virtio_pci_legacy_device ldev; /* 824 32 */ struct virtio_pci_modern_device mdev; /* 824 88 */ }; /* 824 88 */ [...] /* size: 1024, cachelines: 16, members: 18 */ [...] }; Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20230516135446.16266-1-feliu@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-06-27virtio-vdpa: Fix unchecked call to NULL set_vq_affinityDragos Tatulea1-1/+3
The referenced patch calls set_vq_affinity without checking if the op is valid. This patch adds the check. Fixes: 3dad56823b53 ("virtio-vdpa: Support interrupt affinity spreading mechanism") Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Message-Id: <20230504135053.2283816-1-dtatulea@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Feng Liu <feliu@nvidia.com>
2023-04-27Merge tag 'mm-stable-2023-04-27-15-30' of ↵Linus Torvalds2-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of switching from a user process to a kernel thread. - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav. - zsmalloc performance improvements from Sergey Senozhatsky. - Yue Zhao has found and fixed some data race issues around the alteration of memcg userspace tunables. - VFS rationalizations from Christoph Hellwig: - removal of most of the callers of write_one_page() - make __filemap_get_folio()'s return value more useful - Luis Chamberlain has changed tmpfs so it no longer requires swap backing. Use `mount -o noswap'. - Qi Zheng has made the slab shrinkers operate locklessly, providing some scalability benefits. - Keith Busch has improved dmapool's performance, making part of its operations O(1) rather than O(n). - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd, permitting userspace to wr-protect anon memory unpopulated ptes. - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather than exclusive, and has fixed a bunch of errors which were caused by its unintuitive meaning. - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature, which causes minor faults to install a write-protected pte. - Vlastimil Babka has done some maintenance work on vma_merge(): cleanups to the kernel code and improvements to our userspace test harness. - Cleanups to do_fault_around() by Lorenzo Stoakes. - Mike Rapoport has moved a lot of initialization code out of various mm/ files and into mm/mm_init.c. - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for DRM, but DRM doesn't use it any more. - Lorenzo has also coverted read_kcore() and vread() to use iterators and has thereby removed the use of bounce buffers in some cases. - Lorenzo has also contributed further cleanups of vma_merge(). - Chaitanya Prakash provides some fixes to the mmap selftesting code. - Matthew Wilcox changes xfs and afs so they no longer take sleeping locks in ->map_page(), a step towards RCUification of pagefaults. - Suren Baghdasaryan has improved mmap_lock scalability by switching to per-VMA locking. - Frederic Weisbecker has reworked the percpu cache draining so that it no longer causes latency glitches on cpu isolated workloads. - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig logic. - Liu Shixin has changed zswap's initialization so we no longer waste a chunk of memory if zswap is not being used. - Yosry Ahmed has improved the performance of memcg statistics flushing. - David Stevens has fixed several issues involving khugepaged, userfaultfd and shmem. - Christoph Hellwig has provided some cleanup work to zram's IO-related code paths. - David Hildenbrand has fixed up some issues in the selftest code's testing of our pte state changing. - Pankaj Raghav has made page_endio() unneeded and has removed it. - Peter Xu contributed some rationalizations of the userfaultfd selftests. - Yosry Ahmed has fixed an issue around memcg's page recalim accounting. - Chaitanya Prakash has fixed some arm-related issues in the selftests/mm code. - Longlong Xia has improved the way in which KSM handles hwpoisoned pages. - Peter Xu fixes a few issues with uffd-wp at fork() time. - Stefan Roesch has changed KSM so that it may now be used on a per-process and per-cgroup basis. * tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm,unmap: avoid flushing TLB in batch if PTE is inaccessible shmem: restrict noswap option to initial user namespace mm/khugepaged: fix conflicting mods to collapse_file() sparse: remove unnecessary 0 values from rc mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area() hugetlb: pte_alloc_huge() to replace huge pte_alloc_map() maple_tree: fix allocation in mas_sparse_area() mm: do not increment pgfault stats when page fault handler retries zsmalloc: allow only one active pool compaction context selftests/mm: add new selftests for KSM mm: add new KSM process and sysfs knobs mm: add new api to enable ksm per process mm: shrinkers: fix debugfs file permissions mm: don't check VMA write permissions if the PTE/PMD indicates write permissions migrate_pages_batch: fix statistics for longterm pin retry userfaultfd: use helper function range_in_vma() lib/show_mem.c: use for_each_populated_zone() simplify code mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list() fs/buffer: convert create_page_buffers to folio_create_buffers fs/buffer: add folio_create_empty_buffers helper ...
2023-04-27Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-39/+210
Pull virtio updates from Michael Tsirkin: "virtio,vhost,vdpa: features, fixes, and cleanups: - reduction in interrupt rate in virtio - perf improvement for VDUSE - scalability for vhost-scsi - non power of 2 ring support for packed rings - better management for mlx5 vdpa - suspend for snet - VIRTIO_F_NOTIFICATION_DATA - shared backend with vdpa-sim-blk - user VA support in vdpa-sim - better struct packing for virtio and fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (52 commits) vhost_vdpa: fix unmap process in no-batch mode MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERS tools/virtio: fix build caused by virtio_ring changes virtio_ring: add a struct device forward declaration vdpa_sim_blk: support shared backend vdpa_sim: move buffer allocation in the devices vdpa/snet: use likely/unlikely macros in hot functions vdpa/snet: implement kick_vq_with_data callback virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature support virtio: add VIRTIO_F_NOTIFICATION_DATA feature support vdpa/snet: support the suspend vDPA callback vdpa/snet: support getting and setting VQ state MAINTAINERS: add vringh.h to Virtio Core and Net Drivers vringh: address kdoc warnings vdpa: address kdoc warnings virtio_ring: don't update event idx on get_buf vdpa_sim: add support for user VA vdpa_sim: replace the spinlock with a mutex to protect the state vdpa_sim: use kthread worker vdpa_sim: make devices agnostic for work management ...
2023-04-21virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature supportAlvaro Karsz1-2/+21
Add VIRTIO_F_NOTIFICATION_DATA support for vDPA transport. If this feature is negotiated, the driver passes extra data when kicking a virtqueue. A device that offers this feature needs to implement the kick_vq_with_data callback. kick_vq_with_data receives the vDPA device and data. data includes: 16 bits vqn and 16 bits next available index for split virtqueues. 16 bits vqs, 15 least significant bits of next available index and 1 bit next_wrap for packed virtqueues. This patch follows a patch [1] by Viktor Prutyanov which adds support for the MMIO, channel I/O and modern PCI transports. Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Message-Id: <20230413081855.36643-3-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-04-21virtio: add VIRTIO_F_NOTIFICATION_DATA feature supportViktor Prutyanov3-2/+52
According to VirtIO spec v1.2, VIRTIO_F_NOTIFICATION_DATA feature indicates that the driver passes extra data along with the queue notifications. In a split queue case, the extra data is 16-bit available index. In a packed queue case, the extra data is 1-bit wrap counter and 15-bit available index. Add support for this feature for MMIO, channel I/O and modern PCI transports. Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20230413081855.36643-2-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21virtio_ring: don't update event idx on get_bufAlbert Huang1-6/+16
In virtio_net, if we disable napi_tx, when we trigger a tx interrupt, the vq->event_triggered will be set to true. It is then never reset until we explicitly call virtqueue_enable_cb_delayed or virtqueue_enable_cb_prepare. If we disable the napi_tx, virtqueue_enable_cb* will only be called when the tx ring is getting relatively empty. Since event_triggered is true, VRING_AVAIL_F_NO_INTERRUPT or VRING_PACKED_EVENT_FLAG_DISABLE will not be set. As a result we update vring_used_event(&vq->split.vring) or vq->packed.vring.driver->off_wrap every time we call virtqueue_get_buf_ctx. This causes more interrupts. To summarize: 1) event_triggered was set to true in vring_interrupt() 2) after this nothing will happen in virtqueue_disable_cb() so VRING_AVAIL_F_NO_INTERRUPT is not set in avail_flags_shadow 3) virtqueue_get_buf_ctx_split() will still think the cb is enabled and then it will publish a new event index To fix: update VRING_AVAIL_F_NO_INTERRUPT or VRING_PACKED_EVENT_FLAG_DISABLE in the vq when we call virtqueue_disable_cb even when event_triggered is true. Tested with iperf: iperf3 tcp stream: vm1 -----------------> vm2 vm2 just receives tcp data stream from vm1, and sends acks to vm1, there are many tx interrupts in vm2. with the patch applied there are just a few tx interrupts. v2->v3: -update the interrupt disable flag even with the event_triggered is set, -instead of checking whether event_triggered is set in -virtqueue_get_buf_ctx_{packed/split}, will cause the drivers which have -not called virtqueue_{enable/disable}_cb to miss notifications. v3->v4: -remove change for -"if (vq->packed.event_flags_shadow != VRING_PACKED_EVENT_FLAG_DISABLE)" -in virtqueue_disable_cb_packed Fixes: 8d622d21d248 ("virtio: fix up virtio_disable_cb") Signed-off-by: Albert Huang <huangjie.albert@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230329102300.61000-1-huangjie.albert@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21vdpa: Add eventfd for the vdpa callbackXie Yongji1-0/+1
Add eventfd for the vdpa callback so that user can signal it directly instead of triggering the callback. It will be used for vhost-vdpa case. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Message-Id: <20230323053043.35-9-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-04-21virtio-vdpa: Support interrupt affinity spreading mechanismXie Yongji1-0/+68
To support interrupt affinity spreading mechanism, this makes use of group_cpus_evenly() to create an irq callback affinity mask for each virtqueue of vdpa device. Then we will unify set_vq_affinity callback to pass the affinity to the vdpa device driver. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Message-Id: <20230323053043.35-4-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-04-21vdpa: Add set/get_vq_affinity callbacks in vdpa_config_opsXie Yongji1-0/+28
This introduces set/get_vq_affinity callbacks in vdpa_config_ops to support virtqueue affinity management for vdpa device drivers. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230323053043.35-3-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21virtio_ring: Allow non power of 2 sizes for packed virtqueueFeng Liu1-5/+0
According to the Virtio Specification, the Queue Size parameter of a virtqueue corresponds to the maximum number of descriptors in that queue, and it does not have to be a power of 2 for packed virtqueues. However, the virtio_pci_modern driver enforced a power of 2 check for virtqueue sizes, which is unnecessary and restrictive for packed virtuqueue. Split virtqueue still needs to check the virtqueue size is power_of_2 which has been done in vring_alloc_queue_split of the virtio_ring layer. To validate this change, we tested various virtqueue sizes for packed rings, including 128, 256, 512, 100, 200, 500, and 1000, with CONFIG_PAGE_POISONING enabled, and all tests passed successfully. Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20230315185458.11638-2-feliu@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21virtio_ring: Use const to annotate read-only pointer paramsFeng Liu1-18/+18
Add const to make the read-only pointer parameters clear, similar to many existing functions. To implement this change, the commit also introduces the use of `container_of_const` to implement `to_vvq`, which ensures the const-ness of read-only parameters and avoids accidental modification of their members. Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Message-Id: <20230310053428.3376-4-feliu@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-21virtio_ring: Avoid using inline for small functionsFeng Liu1-7/+7
According to kernel coding style [1], defining inline functions is not necessary and beneficial for simple functions. Hence clean up the code by removing the inline keyword. It is verified with GCC 12.2.0, the generated code with/without inline is same. Additionally tested with pktgen and iperf, and verified the result, the pps test results are the same in the cases of with/without inline. Iperf and pps of pktgen for virtio-net didn't change before and after the change. [1] https://www.kernel.org/doc/html/v6.2-rc3/process/coding-style.html#the-inline-disease Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20230310053428.3376-3-feliu@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-06virtio-mmio: Add explicit include for of.hRob Herring1-0/+1
With linux/acpi.h no longer implicitly including of.h, add an explicit include of of.h to fix the following error: drivers/virtio/virtio_mmio.c:492:13: error: implicit declaration of function 'of_property_read_bool'; did you mean 'fwnode_property_read_bool'? [-Werror=implicit-function-declaration] Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-05mm, treewide: redefine MAX_ORDER sanelyKirill A. Shutemov2-7/+7
MAX_ORDER currently defined as number of orders page allocator supports: user can ask buddy allocator for page order between 0 and MAX_ORDER-1. This definition is counter-intuitive and lead to number of bugs all over the kernel. Change the definition of MAX_ORDER to be inclusive: the range of orders user can ask from buddy allocator is 0..MAX_ORDER now. [kirill@shutemov.name: fix min() warning] Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box [akpm@linux-foundation.org: fix another min_t warning] [kirill@shutemov.name: fixups per Zi Yan] Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name [akpm@linux-foundation.org: fix underlining in docs] Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-25Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2-43/+103
Pull virtio updates from Michael Tsirkin: - device feature provisioning in ifcvf, mlx5 - new SolidNET driver - support for zoned block device in virtio blk - numa support in virtio pmem - VIRTIO_F_RING_RESET support in vhost-net - more debugfs entries in mlx5 - resume support in vdpa - completion batching in virtio blk - cleanup of dma api use in vdpa - now simulating more features in vdpa-sim - documentation, features, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa/mlx5: support device features provisioning vdpa/mlx5: make MTU/STATUS presence conditional on feature bits vdpa: validate device feature provisioning against supported class vdpa: validate provisioned device features against specified attribute vdpa: conditionally read STATUS in config space vdpa: fix improper error message when adding vdpa dev vdpa/mlx5: Initialize CVQ iotlb spinlock vdpa/mlx5: Don't clear mr struct on destroy MR vdpa/mlx5: Directly assign memory key tools/virtio: enable to build with retpoline vringh: fix a typo in comments for vringh_kiov vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails scsi: virtio_scsi: fix handling of kmalloc failure vdpa: Fix a couple of spelling mistakes in some messages vhost-net: support VIRTIO_F_RING_RESET vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit vdpa: mlx5: support per virtqueue dma device vdpa: set dma mask for vDPA device virtio-vdpa: support per vq dma device vdpa: introduce get_vq_dma_device() ...
2023-02-20virtio-vdpa: support per vq dma deviceJason Wang1-3/+10
This patch adds the support of per vq dma device for virito-vDPA. vDPA parents then are allowed to use different DMA devices. This is useful for the parents that have software or emulated virtqueues. Reviewed-by: Eli Cohen <elic@nvidia.com> Tested-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230119061525.75068-4-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-20virtio_ring: per virtqueue dma deviceJason Wang1-40/+93
This patch introduces a per virtqueue dma device. This will be used for virtio devices whose virtqueue are backed by different underlayer devices. One example is the vDPA that where the control virtqueue could be implemented through software mediation. Some of the work are actually done before since the helper like vring_dma_device(). This work left are: - Let vring_dma_device() return the per virtqueue dma device instead of the vdev's parent. - Allow passing a dma_device when creating the virtqueue through a new helper, old vring creation helper will keep using vdev's parent. Reviewed-by: Eli Cohen <elic@nvidia.com> Tested-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230119061525.75068-2-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-27driver core: make struct bus_type.uevent() take a const *Greg Kroah-Hartman1-2/+2
The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-28virtio: Implementing attribute show with sysfs_emitDawei Li1-6/+6
Replace sprintf with sysfs_emit or its variants for their built-in PAGE_SIZE awareness. Signed-off-by: Dawei Li <set_pte_at@outlook.com> Message-Id: <TYCP286MB23232A999FE7DBDF50BA0FAACA0F9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-28virtio_pci: modify ENOENT to EINVALAngus Chen1-1/+1
Virtio_crypto use max_data_queues+1 to setup vqs, we use vp_modern_get_num_queues to protect the vq range in setup_vq. We could enter index >= vp_modern_get_num_queues(mdev) in setup_vq if common->num_queues is not set well,and it return -ENOENT. It is better to use -EINVAL instead. Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com> Message-Id: <20221101111655.1947-1-angus.chen@jaguarmicro.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-28virtio_ring: use helper function is_power_of_2()Shaoqin Huang1-1/+1
Use helper function is_power_of_2() to check if num is power of two. Minor readability improvement. Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com> Message-Id: <20221021062734.228881-3-shaoqin.huang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
2022-12-28virtio_pci: use helper function is_power_of_2()Shaoqin Huang1-1/+1
Use helper function is_power_of_2() to check if num is power of two. Minor readability improvement. Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com> Message-Id: <20221021062734.228881-2-shaoqin.huang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
2022-10-13virtio_pci: use irq to detect interrupt supportMichael S. Tsirkin1-2/+2
commit 71491c54eafa ("virtio_pci: don't try to use intxif pin is zero") breaks virtio_pci on powerpc, when running as a qemu guest. vp_find_vqs() bails out because pci_dev->pin == 0. But pci_dev->irq is populated correctly, so vp_find_vqs_intx() would succeed if we called it - which is what the code used to do. This seems to happen because pci_dev->pin is not populated in pci_assign_irq(). A PCI core bug? Maybe. However Linus said: I really think that that is basically the only time you should use that 'pci_dev->pin' thing: it basically exists not for "does this device have an IRQ", but for "what is the routing of this irq on this device". and The correct way to check for "no irq" doesn't use NO_IRQ at all, it just does if (dev->irq) ... so let's just check irq and be done with it. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Fixes: 71491c54eafa ("virtio_pci: don't try to use intxif pin is zero") Cc: "Angus Chen" <angus.chen@jaguarmicro.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221012220312.308522-1-mst@redhat.com>
2022-10-10Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-07virtio_pci: don't try to use intxif pin is zeroAngus Chen1-0/+3
The background is that we use dpu in cloud computing,the arch is x86,80 cores. We will have a lots of virtio devices,like 512 or more. When we probe about 200 virtio_blk devices,it will fail and the stack is printed as follows: [25338.485128] virtio-pci 0000:b3:00.0: virtio_pci: leaving for legacy driver [25338.496174] genirq: Flags mismatch irq 0. 00000080 (virtio418) vs. 00015a00 (timer) [25338.503822] CPU: 20 PID: 5431 Comm: kworker/20:0 Kdump: loaded Tainted: G OE --------- - - 4.18.0-305.30.1.el8.x86_64 [25338.516403] Hardware name: Inspur NF5280M5/YZMB-00882-10E, BIOS 4.1.21 08/25/2021 [25338.523881] Workqueue: events work_for_cpu_fn [25338.528235] Call Trace: [25338.530687] dump_stack+0x5c/0x80 [25338.534000] __setup_irq.cold.53+0x7c/0xd3 [25338.538098] request_threaded_irq+0xf5/0x160 [25338.542371] vp_find_vqs+0xc7/0x190 [25338.545866] init_vq+0x17c/0x2e0 [virtio_blk] [25338.550223] ? ncpus_cmp_func+0x10/0x10 [25338.554061] virtblk_probe+0xe6/0x8a0 [virtio_blk] [25338.558846] virtio_dev_probe+0x158/0x1f0 [25338.562861] really_probe+0x255/0x4a0 [25338.566524] ? __driver_attach_async_helper+0x90/0x90 [25338.571567] driver_probe_device+0x49/0xc0 [25338.575660] bus_for_each_drv+0x79/0xc0 [25338.579499] __device_attach+0xdc/0x160 [25338.583337] bus_probe_device+0x9d/0xb0 [25338.587167] device_add+0x418/0x780 [25338.590654] register_virtio_device+0x9e/0xe0 [25338.595011] virtio_pci_probe+0xb3/0x140 [25338.598941] local_pci_probe+0x41/0x90 [25338.602689] work_for_cpu_fn+0x16/0x20 [25338.606443] process_one_work+0x1a7/0x360 [25338.610456] ? create_worker+0x1a0/0x1a0 [25338.614381] worker_thread+0x1cf/0x390 [25338.618132] ? create_worker+0x1a0/0x1a0 [25338.622051] kthread+0x116/0x130 [25338.625283] ? kthread_flush_work_fn+0x10/0x10 [25338.629731] ret_from_fork+0x1f/0x40 [25338.633395] virtio_blk: probe of virtio418 failed with error -16 The log : "genirq: Flags mismatch irq 0. 00000080 (virtio418) vs. 00015a00 (timer)" was printed because of the irq 0 is used by timer exclusive,and when vp_find_vqs call vp_find_vqs_msix and returns false twice (for whatever reason), then it will call vp_find_vqs_intx as a fallback. Because vp_dev->pci_dev->irq is zero, we request irq 0 with flag IRQF_SHARED, and get a backtrace like above. According to PCI spec about "Interrupt Pin" Register (Offset 3Dh): "The Interrupt Pin register is a read-only register that identifies the legacy interrupt Message(s) the Function uses. Valid values are 01h, 02h, 03h, and 04h that map to legacy interrupt Messages for INTA, INTB, INTC, and INTD respectively. A value of 00h indicates that the Function uses no legacy interrupt Message(s)." So if vp_dev->pci_dev->pin is zero, we should not request legacy interrupt. Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com> Suggested-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220930000915.548-1-angus.chen@jaguarmicro.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07virtio_ring: make vring_alloc_queue_packed prettierDeming Wang1-3/+3
Add some spaces to vring_alloc_queue(make it look prettier). Signed-off-by: Deming Wang <wangdeming@inspur.com> Message-Id: <20220926183306.4535-1-wangdeming@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07virtio_ring: split: Operators use unified styleDeming Wang1-1/+1
The operators of vring_alloc_queue_split should use the unified style.Add space for the '|' ,make it be looked more pretty. Signed-off-by: Deming Wang <wangdeming@inspur.com> Message-Id: <20220926022202.1516-1-wangdeming@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-03virtio: kmsan: check/unpoison scatterlist in vring_map_one_sg()Alexander Potapenko1-1/+9
If vring doesn't use the DMA API, KMSAN is unable to tell whether the memory is initialized by hardware. Explicitly call kmsan_handle_dma() from vring_map_one_sg() in this case to prevent false positives. Link: https://lkml.kernel.org/r/20220915150417.722975-23-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-16virtio: kerneldocs fixes and enhancementsRicardo Cañuelo1-0/+8
Fix variable names in some kerneldocs, naming in others. Add kerneldocs for struct vring_desc and vring_interrupt. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Message-Id: <20220810094004.1250-2-ricardo.canuelo@collabora.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2022-08-16virtio: Revert "virtio: find_vqs() add arg sizes"Michael S. Tsirkin5-9/+4
This reverts commit a10fba0377145fccefea4dc4dd5915b7ed87e546: the proposed API isn't supported on all transports but no effort was made to address this. It might not be hard to fix if we want to: maybe just rename size to size_hint and make sure legacy transports ignore the hint. But it's not sure what the benefit is in any case, so let's drop it. Fixes: a10fba037714 ("virtio: find_vqs() add arg sizes") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220816053602.173815-8-mst@redhat.com>
2022-08-16virtio_vdpa: Revert "virtio_vdpa: support the arg sizes of find_vqs()"Michael S. Tsirkin1-9/+6
This reverts commit 99e8927d8a4da8eb8a8a5904dc13a3156be8e7c0: proposed API isn't supported on all transports but no effort was made to address this. It might not be hard to fix if we want to: maybe just rename size to size_hint and make sure legacy transports ignore the hint. But it's not sure what the benefit is in any case, so let's drop it. Fixes: 99e8927d8a4d ("virtio_vdpa: support the arg sizes of find_vqs()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220816053602.173815-6-mst@redhat.com>
2022-08-16virtio_pci: Revert "virtio_pci: support the arg sizes of find_vqs()"Michael S. Tsirkin4-23/+12
This reverts commit cdb44806fca2d0ad29ca644cbf1505433902ee0c: the legacy path is wrong and in fact can not support the proposed API since for a legacy device we never communicate the vq size to the hypervisor. Reported-by: Andres Freund <andres@anarazel.de> Fixes: cdb44806fca2 ("virtio_pci: support the arg sizes of find_vqs()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220816053602.173815-5-mst@redhat.com>
2022-08-16virtio-mmio: Revert "virtio_mmio: support the arg sizes of find_vqs()"Michael S. Tsirkin1-6/+2
This reverts commit fbed86abba6e0472d98079790e58060e4332608a. The API is now unused, let's not carry dead code around. Fixes: fbed86abba6e ("virtio_mmio: support the arg sizes of find_vqs()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220816053602.173815-4-mst@redhat.com>
2022-08-12Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds10-261/+791
Pull virtio updates from Michael Tsirkin: - A huge patchset supporting vq resize using the new vq reset capability - Features, fixes, and cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits) vdpa/mlx5: Fix possible uninitialized return value vdpa_sim_blk: add support for discard and write-zeroes vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests vdpa_sim_blk: check if sector is 0 for commands other than read or write vdpa_sim: Implement suspend vdpa op vhost-vdpa: uAPI to suspend the device vhost-vdpa: introduce SUSPEND backend feature bit vdpa: Add suspend operation virtio-blk: Avoid use-after-free on suspend/resume virtio_vdpa: support the arg sizes of find_vqs() vhost-vdpa: Call ida_simple_remove() when failed vDPA: fix 'cast to restricted le16' warnings in vdpa.c vDPA: !FEATURES_OK should not block querying device config space vDPA/ifcvf: support userspace to query features and MQ of a management device vDPA/ifcvf: get_config_size should return a value no greater than dev implementation vhost scsi: Allow user to control num virtqueues vhost-scsi: Fix max number of virtqueues vdpa/mlx5: Support different address spaces for control and data vdpa/mlx5: Implement susupend virtqueue callback ...
2022-08-11virtio_vdpa: support the arg sizes of find_vqs()Bo Liu1-6/+9
Virtio vdpa support the new parameter sizes of find_vqs(). Signed-off-by: Bo Liu <liubo03@inspur.com> Message-Id: <20220810085151.7251-1-liubo03@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio: Check dev_set_name() return valueBo Liu1-1/+3
It's possible that dev_set_name() returns -ENOMEM, catch and handle this. Signed-off-by: Bo Liu <liubo03@inspur.com> Message-Id: <20220707031751.4802-1-liubo03@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11virtio_mmio: support the arg sizes of find_vqs()Xuan Zhuo1-2/+6
Virtio MMIO support the new parameter sizes of find_vqs(). Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-36-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_pci: support the arg sizes of find_vqs()Xuan Zhuo4-12/+23
Virtio PCI supports new parameter sizes of find_vqs(). Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-35-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio: find_vqs() add arg sizesXuan Zhuo5-4/+9
find_vqs() adds a new parameter sizes to specify the size of each vq vring. NULL as sizes means that all queues in find_vqs() use the maximum size. A value in the array is 0, which means that the corresponding queue uses the maximum size. In the split scenario, the meaning of size is the largest size, because it may be limited by memory, the virtio core will try a smaller size. And the size is power of 2. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-34-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_pci: support VIRTIO_F_RING_RESETXuan Zhuo2-3/+97
This patch implements virtio pci support for QUEUE RESET. Performing reset on a queue is divided into these steps: 1. notify the device to reset the queue 2. recycle the buffer submitted 3. reset the vring (may re-alloc) 4. mmap vring to device, and enable the queue This patch implements virtio_reset_vq(), virtio_enable_resetq() in the pci scenario. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-33-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_pci: extract the logic of active vq for modern pciXuan Zhuo1-18/+28
Introduce vp_active_vq() to configure vring to backend after vq attach vring. And configure vq vector if necessary. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-32-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_pci: introduce helper to get/set queue resetXuan Zhuo1-0/+39
Introduce new helpers to implement queue reset and get queue reset status. https://github.com/oasis-tcs/virtio-spec/issues/124 https://github.com/oasis-tcs/virtio-spec/issues/139 Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-31-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_ring: struct virtqueue introduce resetXuan Zhuo1-0/+2
Introduce a new member reset to the structure virtqueue to determine whether the current vq is in the reset state. Subsequent patches will use it. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-29-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio: allow to unbreak/break virtqueue individuallyXuan Zhuo1-0/+24
This patch allows the new introduced __virtqueue_break()/__virtqueue_unbreak() to break/unbreak the virtqueue. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-27-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_ring: introduce virtqueue_resize()Xuan Zhuo1-0/+69
Introduce virtqueue_resize() to implement the resize of vring. Based on these, the driver can dynamically adjust the size of the vring. For example: ethtool -G. virtqueue_resize() implements resize based on the vq reset function. In case of failure to allocate a new vring, it will give up resize and use the original vring. During this process, if the re-enable reset vq fails, the vq can no longer be used. Although the probability of this situation is not high. The parameter recycle is used to recycle the buffer that is no longer used. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-25-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_ring: packed: introduce virtqueue_resize_packed()Xuan Zhuo1-0/+30
virtio ring packed supports resize. Only after the new vring is successfully allocated based on the new num, we will release the old vring. In any case, an error is returned, indicating that the vring still points to the old vring. In the case of an error, re-initialize(by virtqueue_reinit_packed()) the virtqueue to ensure that the vring can be used. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-24-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_ring: packed: introduce virtqueue_reinit_packed()Xuan Zhuo1-0/+12
Introduce a function to initialize vq without allocating new ring, desc_state, desc_extra. Subsequent patches will call this function after reset vq to reinitialize vq. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-23-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 18:44:12 +0000