summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2012-11-17target: Fix handling of aborted commandsRoland Dreier1-2/+4
- If we stop processing an already-aborted command in target_execute_cmd(), then we need to complete t_transport_stop_comp to wake up the the TMR handling thread, or else it will end up waiting forever. - If we've a already sent an "aborted" status for a command in transport_check_aborted_status() then we should bail out of transport_send_task_abort() to avoid freeing the command twice. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2012-11-01target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK pathSteve Hodgson1-3/+3
This patch changes core_tmr_abort_task() to use spin_lock -> spin_unlock around se_cmd->t_state_lock while spin_lock_irqsave is held via se_sess->sess_cmd_lock. Signed-off-by: Steve Hodgson <steve@purestorage.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-01iscsi-target: Fix missed wakeup race in TX threadRoland Dreier5-3/+26
The sleeping code in iscsi_target_tx_thread() is susceptible to the classic missed wakeup race: - TX thread finishes handle_immediate_queue() and handle_response_queue(), thinks both queues are empty. - Another thread adds a queue entry and does wake_up_process(), which does nothing because the TX thread is still awake. - TX thread does schedule_timeout() and sleeps forever. In practice this can kill an iSCSI connection if for example an initiator does single-threaded writes and the target misses the wakeup window when queueing an R2T; in this case the connection will be stuck until the initiator loses patience and does some task management operation (or kills the connection entirely). Fix this by converting to wait_event_interruptible(), which does not suffer from this sort of race. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-01target: Avoid integer overflow in se_dev_align_max_sectors()Roland Dreier1-9/+9
The expression (max_sectors * block_size) might overflow a u32 (indeed, since iblock sets max_hw_sectors to UINT_MAX, it is guaranteed to overflow and end up with a much-too-small result in many common cases). Fix this by doing an equivalent calculation that doesn't require multiplication. While we're touching this code, avoid splitting a printk format across two lines and use pr_info(...) instead of printk(KERN_INFO ...). Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-01target: Don't return success from module_init() if setup failsRoland Dreier1-1/+2
If the call to core_dev_release_virtual_lun0() fails, then nothing sets ret to anything other than 0, so even though everything is torn down and freed, target_core_init_configfs() will seem to succeed and the module will be loaded. Fix this by passing the return value on up the chain. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-31target: Re-add explict zeroing of INQUIRY bounce buffer memoryNicholas Bellinger1-0/+2
This patch fixes a regression in spc_emulate_inquiry() code where the local scope bounce buffer was no longer getting it's memory zeroed, causing various problems with SCSI initiators that depend upon areas of INQUIRY EVPD=0x83 payload having been zeroed. This bug was introduced with the following v3.7-rc1 patch + CC'ed stable commit: commit ffe7b0e9326d9c68f5688bef691dd49f1e0d3651 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Fri Sep 7 17:30:38 2012 +0200 target: support zero allocation length in INQUIRY Go ahead and re-add the missing memset of bounce buffer memory to be copied into the outgoing se_cmd descriptor kmapped SGL payload. Reported-by: Kelsey Prantis <kelsey.prantis@intel.com> Cc: Kelsey Prantis <kelsey.prantis@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Grover <agrover@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-26target: reintroduce some obsolete SCSI-2 commandsBernhard Kohl1-0/+18
With kernel 3.6 some obsolete SCSI-2 commands including SEEK_10 have have been removed by commit 1fd032ee10d2816c947f5d5b9abda95e728f0a8f "target: move code for CDB emulation". There are still clients out there which use these old SCSI-2 commands. This mainly happens when running VMs with legacy guest systems, connected via SCSI command pass-through to iSCSI targets. Make them happy and return status GOOD. Many real SCSI disks or external iSCSI storage devices still support these old commands. So let's make LIO backward compatible as well. This patch adds support for the previously removed SEEK_10 and additionally the SEEK_6 and REZERO_UNIT commands. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-26target: Fix double-free of se_cmd in target_complete_tmr_failureNicholas Bellinger1-1/+0
Fabric drivers currently expect to internally release se_cmd in the event of a TMR failure during target_submit_tmr(), which means the immediate call to transport_generic_free_cmd() after TFO->queue_tm_rsp() from within target_complete_tmr_failure() workqueue context is wrong. This is done as some fabrics expect TMR operations to be acknowledged before releasing the descriptor, so the assumption that core is releasing se_cmd associated TMR memory is incorrect. This fixes a OOPs where transport_generic_free_cmd() was being called more than once. This bug was originally observed with tcm_qla2xxx fabric ports. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Andy Grover <agrover@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-11Merge branch 'for-3.7/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-9/+0
Pull block IO update from Jens Axboe: "Core block IO bits for 3.7. Not a huge round this time, it contains: - First series from Kent cleaning up and generalizing bio allocation and freeing. - WRITE_SAME support from Martin. - Mikulas patches to prevent O_DIRECT crashes when someone changes the block size of a device. - Make bio_split() work on data-less bio's (like trim/discards). - A few other minor fixups." Fixed up silent semantic mis-merge as per Mikulas Patocka and Andrew Morton. It is due to the VM no longer using a prio-tree (see commit 6b2dbba8b6ac: "mm: replace vma prio_tree with an interval tree"). So make set_blocksize() use mapping_mapped() instead of open-coding the internal VM knowledge that has changed. * 'for-3.7/core' of git://git.kernel.dk/linux-block: (26 commits) block: makes bio_split support bio without data scatterlist: refactor the sg_nents scatterlist: add sg_nents fs: fix include/percpu-rwsem.h export error percpu-rw-semaphore: fix documentation typos fs/block_dev.c:1644:5: sparse: symbol 'blkdev_mmap' was not declared blockdev: turn a rw semaphore into a percpu rw semaphore Fix a crash when block device is read and block size is changed at the same time block: fix request_queue->flags initialization block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue() block: ioctl to zero block ranges block: Make blkdev_issue_zeroout use WRITE SAME block: Implement support for WRITE SAME block: Consolidate command flag and queue limit checks for merges block: Clean up special command handling logic block/blk-tag.c: Remove useless kfree block: remove the duplicated setting for congestion_threshold block: reject invalid queue attribute values block: Add bio_clone_bioset(), bio_clone_kmalloc() block: Consolidate bio_alloc_bioset(), bio_kmalloc() ...
2012-10-10Merge branch 'for-next' of ↵Linus Torvalds41-605/+613
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull scsi target updates from Nicholas Bellinger: "Things have been calm for the most part with no new fabric drivers in flight for v3.7 (we're up to eight now !), so this update is primarily focused on addressing a few long-standing items within target-core and iscsi-target fabric code. The highlights include: - target: Simplify fabric sense data length handling (roland) - qla2xxx: Fix endianness of task management response code (roland) - target: fix truncation of mode data, support zero allocation length (paolo) - target: Properly support zero-length commands in normal processing path (paolo) - iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT PDU (ronnie + nab) - iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode (ronnie + nab) - target/file: Re-enable optional fd_buffered_io=1 operation (nab + hch) - iscsi-target: Add MaxXmitDataSegmenthLength forr target -> initiator MDRSL declaration (nab) - target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough (nab + hch) - tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls (hch + nab) - tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls (nab + hch) The last series for adding a new target_submit_cmd_map_sgls() fabric caller (as requested by hch) that accepts pre-allocated SGL memory (using existing logic), along with converting tcm_loop + tcm_vhost has only been in -next for the last days, but has gotten enough review +testing and is clear enough a mechanical change that I think it's reasonable to merge for -rc1 code. Thanks again to everyone who contributed this round! Extra special thanks to Roland (PureStorage) for tracking down the qla2xxx target TMR response code endian issue, and to Paolo (Redhat) for resolving the long standing zero-length CDB issues within target-core between virtual and pSCSI backends." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits) iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values iscsit: proper endianess conversions iscsit: use the itt_t abstract type iscsit: add missing endianess conversion in iscsit_check_inaddr_any iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp iscsit: mark various functions static target/iscsi: precedence bug in iscsit_set_dataout_sequence_values() target/usb-gadget: strlen() doesn't count the terminator target/usb-gadget: remove duplicate initialization tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls target: Add control CDB READ payload zero work-around tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode iscsi-target: Change iscsi_target_seq_pdu_list.c to honor MaxXmitDataSegmentLength iscsi-target: Add MaxXmitDataSegmentLength connection recovery check iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLength iscsi-target: Enable MaxXmitDataSegmentLength operation in login path iscsi-target: Add base MaxXmitDataSegmentLength code target/file: Re-enable optional fd_buffered_io=1 operation ...
2012-10-03iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout valuesNicholas Bellinger1-2/+2
This patch increases the default for nopin_timeout to 15 seconds (wait between sending a new NopIN ping) and nopin_response_timeout to 30 seconds (wait for NopOUT response before failing the connection) in order to avoid false positives by iSCSI Initiators who are not always able (under load) to respond to NopIN echo PING requests within the current 5 second window. False positives have been observed recently using Open-iSCSI code on v3.3.x with heavy large-block READ workloads over small MTU 1 Gb/sec ports, and increasing these values to more reasonable defaults significantly reduces the possibility of false positive NopIN response timeout events under this specific workload. Historically these have been set low to initiate connection recovery as soon as possible if we don't hear a ping back, but for modern v3.x code on 1 -> 10 Gb/sec ports these new defaults make alot more sense. Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-03iscsit: proper endianess conversionsChristoph Hellwig10-138/+122
Make sure all on the wire types are use as big endian and big endian only so that sparse can verify all the conversions are done right. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-03iscsit: use the itt_t abstract typeChristoph Hellwig10-46/+37
Use the special itt_t type defined by the iscsi headers and the initiator to make sure it's an opaque value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02iscsit: add missing endianess conversion in iscsit_check_inaddr_anyChristoph Hellwig1-1/+1
Sparse noticed that INADDR_ANY needs to be converted to big endian before it can be stored in struct sockaddr_in.s_addr. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02iscsit: remove incorrect unlock in iscsit_build_sendtargets_respChristoph Hellwig1-1/+0
Fix a potential multiple spin-unlock -> deadlock scenario during the overflow check within iscsit_build_sendtargets_resp() as found by sparse static checking. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02iscsit: mark various functions staticChristoph Hellwig10-25/+23
This patch marks a number of functions static to appease sparse static checking. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02target/iscsi: precedence bug in iscsit_set_dataout_sequence_values()Dan Carpenter1-3/+3
Clang warns about this bug: drivers/target/iscsi/iscsi_target_erl0.c:52:45: warning: operator '?:' has lower precedence than '+'; '+' will be evaluated first [-Wparentheses] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02target: Add control CDB READ payload zero work-aroundNicholas Bellinger1-0/+21
This patch carries forward a work-around from tcm_loop to target core code to explicitly clear control CDB READ paylods in order to avoid bugs in scsi-generic user-space code for INQUIRY that do not explicitly zero CDB payload memory. (v2: Drop TARGET_SCF_MAP_CLEAR_MEM, and perform the explicit zero of READ memory for all target_submit_cmd_map_sgls users) Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02tcm_loop: Convert I/O path to use target_submit_cmd_map_sglsNicholas Bellinger1-54/+8
This patch converts tcm_loop to use target_submit_cmd_map_sgls() for I/O submission and mapping of pre-allocated SGL memory from incoming scsi_cmnd -> se_cmd descriptors. This includes removing the original open-coded fabric uses of target core callers to support transport_generic_map_mem_to_cmd() between target_setup_cmd_from_cdb() and transport_handle_cdb_direct() logic. (v2: Use renamed target_submit_cmd_map_sgls) Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02target: Add target_submit_cmd_map_sgls for SGL fabric memory passthroughNicholas Bellinger1-6/+59
This patch adds a new target_submit_cmd_map_sgls() to pass pre-allocated SGL memory using transport_generic_map_mem_to_cmd() logic into the generic target submit I/O codepath. It also adds a target_submit_cmd() wrapper around target_submit_cmd_map_sgls() for existing fabric code that already assumes internal target-core SGL memory allocation. (v2: Rename to target_submit_cmd_map_sgls + drop TARGET_SCF_MAP_MEM flag in favor of non zero sgl_count check) Reported-by: Christoph Hellwig <hch@lst.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-modeNicholas Bellinger1-0/+12
We've had reports in the past about this specific case, so it's time to go ahead and explicitly set cache_dynamic_acls=1 for generate_node_acls=1 (TPG demo-mode) operation. During normal generate_node_acls=0 operation with explicit NodeACLs -> se_node_acl memory is persistent to the configfs group located at /sys/kernel/config/target/$TARGETNAME/$TPGT/acls/$INITIATORNAME, so in the generate_node_acls=1 case we want the reservation logic to reference existing per initiator IQN se_node_acl memory (not to generate a new se_node_acl), so go ahead and always set cache_dynamic_acls=1 when TPG demo-mode is enabled. Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02iscsi-target: Change iscsi_target_seq_pdu_list.c to honor ↵Nicholas Bellinger1-30/+31
MaxXmitDataSegmentLength This patch converts iscsi_target_seq_pdu_list.c code for DataSequenceInOrder=No + DataPDUInOrder=No operation to honor the MaxXmitDataSegmentLength value for iscsi_cmd->se_cmd.data_direction == DMA_TO_DEVICE cases. Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02iscsi-target: Add MaxXmitDataSegmentLength connection recovery checkNicholas Bellinger3-1/+10
The iSCSI TMR TASK_REASSIGN completion logic in iscsi_tmr_task_reassign() does an explict check for MRDSL across task reassignment, so go ahead and add an explict MaxXmitDataSegmentLength check here as well to be safe. Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLengthNicholas Bellinger1-12/+12
Now that iscsi-target supports a local configurable MaxXmitDataSegmentLength, go ahead and make ISCSI_OP_SCSI_CMD, ISCSI_OP_SCSI_DATA_OUT, ISCSI_OP_NOOP_OUT and ISCSI_OP_TEXT PDU payload checks honor conn_ops->MaxXmitDataSegmentLength. Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02iscsi-target: Enable MaxXmitDataSegmentLength operation in login pathNicholas Bellinger3-12/+44
This patch activates MaxXmitDataSegmentLength usage that performs the following sequence of events: - Once the incoming initiator's MAXRECVDATASEGMENTLENGTH key is detected within iscsi_check_acceptor_state(), save the requested MRDSL into conn->conn_ops->MaxRecvDataSegmentLength - Next change the outgoing target's MaxRecvDataSegmenthLength key=value based upon the local TPG's MaxXmitDataSegmentLength attribute value. - Change iscsi_set_connection_parameters() to skip the assignment of conn->conn_ops->MaxRecvDataSegmentLength, now setup within iscsi_check_acceptor_state() Also update iscsi_decode_text_input() -> iscsi_check_acceptor_state() code-path to accept struct iscsi_conn *. Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02iscsi-target: Add base MaxXmitDataSegmentLength codeNicholas Bellinger4-0/+31
This patch introduces a new per connection MaxXmitDataSegmentLength parameter value used to represent the outgoing MaxRecvDataSegmentLength that is actually sent over the wire during iSCSI login response back to the initiator side. It also adds a new MaxXmitDataSegmentLength configfs attribute to represent this value within the existing TPG parameter group under /sys/kernel/config/target/iscsi/$TARGETNAME/$TPGT/param/ Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02target/file: Re-enable optional fd_buffered_io=1 operationNicholas Bellinger2-3/+39
This patch re-adds the ability to optionally run in buffered FILEIO mode (eg: w/o O_DSYNC) for device backends in order to once again use the Linux buffered cache as a write-back storage mechanism. This logic was originally dropped with mainline v3.5-rc commit: commit a4dff3043c231d57f982af635c9d2192ee40e5ae Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed May 30 16:25:41 2012 -0700 target/file: Use O_DSYNC by default for FILEIO backends This difference with this patch is that fd_create_virtdevice() now forces the explicit setting of emulate_write_cache=1 when buffered FILEIO operation has been enabled. (v2: Switch to FDBD_HAS_BUFFERED_IO_WCE + add more detailed comment as requested by hch) Reported-by: Ferry <iscsitmp@bananateam.nl> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-09-22iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT PDUNicholas Bellinger1-0/+1
This patch adds a missing iscsi_reject->ffffffff assignment within iscsit_send_reject() code to properly follow RFC-3720 Section 10.17 Bytes 16 -> 19 for the PDU format definition of ISCSI_OP_REJECT. We've not seen any initiators care about this bytes in practice, but as Ronnie reported this was causing trouble with wireshark packet decoding lets go ahead and fix this up now. Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-22sbp-target: fix return value check in sbp_register_configfs()Wei Yongjun1-2/+2
In case of error, the function target_fabric_configfs_init() returns ERR_PTR() not NULL pointer. The NULL test in the return value check should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: fix return code in target_core_init_configfs error pathPeter Senna Tschudin1-1/+7
This patch fixes error cases within target_core_init_configfs() to properly set ret = -ENOMEM before jumping to the out_global exception path. This was originally discovered with the following Coccinelle semantic match information: Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: move the dereference below the NULL testWei Yongjun1-4/+6
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17tcm_fc: move the dereference below the NULL testWei Yongjun1-1/+2
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: go through normal processing for all zero-length commandsPaolo Bonzini1-17/+0
Yay, all users of transport_kmap_data_sg now check for a zero-length request and/or a too-small parameter list length. We can thus go through the normal emulation path even for such commands. This means that out-of-bounds reads and writes are now reported correctly even if they transfer 0 blocks. Other errors are also reported correctly. Testcase: sg_raw /dev/sdb 28 00 80 00 00 00 00 00 00 00 should fail with ILLEGAL REQUEST / LBA OUT OF RANGE sense does not fail without the patch (still wrong with the patch, but better: the ASC is INVALID FIELD IN CDB) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: do not submit a zero-bio I/O requestPaolo Bonzini1-0/+6
scsi_setup_fs_cmnd does not like to receive requests with no bios attached to it. Special-case zero-length reads and writes, by not submitting any bio. Testcase: sg_raw /dev/sdb 28 00 00 00 00 00 00 00 00 00 should not fail panics with the rest of the series but not this patch behaves correctly without or with this series Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: support zero allocation length in SBC commandsPaolo Bonzini1-8/+15
READ CAPACITY must be subject to the same treatment as INQUIRY, REQUEST SENSE, and MODE SENSE, but there are no pre-existing bugs to fix here. Just use an on-stack buffer, and copy to it after checking the return value of transport_kmap_data_sg. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: fix truncation of mode data, support zero allocation lengthPaolo Bonzini1-10/+7
The offset was not bumped back to the full size after writing the header of the MODE SENSE response, so the last 1 or 2 bytes were not copied. On top of this, support zero-length requests by checking for the return value of transport_kmap_data_sg. Testcase: sg_raw -r20 /dev/sdb 5a 00 0a 00 00 00 00 00 14 00 last byte should be 0x1e it is 0x00 without the patch it is correct with the patch Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: support zero allocation length in INQUIRYPaolo Bonzini1-25/+6
INQUIRY processing already uses an on-heap bounce buffer for loopback, but not for other fabrics. Switch this to a cheaper on-stack bounce buffer, similar to the one used by MODE SENSE and REQUEST SENSE, and use it unconditionally. With this in place, zero allocation length is handled simply by checking the return address of transport_kmap_data_sg. Testcase: sg_raw /dev/sdb 12 00 83 00 00 00 should fail with ILLEGAL REQUEST / INVALID FIELD IN CDB sense does not fail without the patch fails correctly with the series Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: use list_move_tail instead of list_del/list_add_tailWei Yongjun1-2/+1
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target/iscsi: Don't log "iSCSI Login negotiation failed." twiceRoland Dreier1-1/+0
There's no need for iscsi_target_init_negotiation() to print iSCSI Login negotiation failed. on failure, since its only caller (__iscsi_target_login_thread()) prints exactly the same message if it gets an error return back. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Drop se_subsystem_api->[write_cache,fua_write]_emulated flagsNicholas Bellinger4-9/+6
This patch drops se_subsystem_api->[write_cache,fua_write]_emulated flags set by viritual FILEIO/IBLOCK/RD_MCP backend drivers in favor of explict TRANSPORT_PLUGIN_PHBA_PDEV checks to know when to fail if userspace is attempting to set virtual emulation bits for an pSCSI (passthrough) backend device. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: remove unused including <generated/utsrelease.h>Wei Yongjun2-2/+0
Remove including <generated/utsrelease.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17tcm_fc: remove unused including <generated/utsrelease.h>Wei Yongjun3-3/+0
Remove including <generated/utsrelease.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target/rd: Allow WriteCacheEnabled=1 operation with rd_mcp backendsNicholas Bellinger1-0/+1
This patch adds the missing rd_mcp_template->write_cache_emulated=1 bit to optionally allow WriteCacheEnabled=1 (WCE) to be enabled for the built-in TCM/rd_mcp backend driver. Tested on v3.6-rc[0,2] code with loopback+tcm_vhost fabric ports. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target/iblock: Use match_strlcpy for Opt_udev_path string assignmentNicholas Bellinger1-6/+3
Following commit dbc6e0222 from Al Viro for fileio, go ahead and make Opt_udev_path within iblock_set_configfs_dev_params use match_strlcpy instead of the match_strdup -> snprintf -> kfree equivalent. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Fix minor spelling typos in drivers/targetMasanari Iida8-15/+15
Correct spelling typo in printk and comment within drivers/target. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Simplify fabric sense data length handlingRoland Dreier7-127/+79
Every fabric driver has to supply a se_tfo->set_fabric_sense_len() method, just so iSCSI can return an offset of 2. However, every fabric driver is already allocating a sense buffer and passing it into the target core, either via transport_init_se_cmd() or target_submit_cmd(). So instead of having iSCSI pass the start of its sense buffer into the core and then later tell the core to skip the first 2 bytes, it seems easier for iSCSI just to do the offset of 2 when it passes the sense buffer into the core. Then we can drop the se_tfo->set_fabric_sense_len() everywhere, and just add a couple of lines of code to iSCSI to set the sense data length to the beginning of the buffer right before it sends it over the network. (nab: Remove .set_fabric_sense_len usage from tcm_qla2xxx_npiv_ops + change transport_get_sense_buffer to follow v3.6-rc6 code w/o ->set_fabric_sense_len usage) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Remove unused target_core_fabric_ops.get_fabric_sense_len methodRoland Dreier5-31/+0
There are no callers of se_tfo->get_fabric_sense_len(), so we should stop having every fabric driver implement it. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target/sbp: Remove strict param from sbp_parse_wwnAndy Grover1-4/+4
It's always set, and controls whether uppercase A-F are allowed hex values. I don't see a reason not to accept these. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: Chris Boot <bootc@bootc.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Cleanup transport_subsystem_check_initAndy Grover1-3/+1
Move static into function body from file scope. Remove extraneous return statement Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 23:22:44 +0000