summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2018-06-26Merge tag 'qcom-fixes-for-4.18-rc2' of ↵Olof Johansson1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Qualcomm Fixes for v4.18-rc2 * Fix compiler warnings for cmd-db driver * tag 'qcom-fixes-for-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-25qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependencyArnd Bergmann1-1/+2
Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header variable is never initialized, and through code optimization concludes that a lot of other code cannot possibly work after that: drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr': drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le32_to_cpu(ent.addr); drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data': drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] ent_len = le16_to_cpu(ent.len); drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 offset = le16_to_cpu(hdr->data_offset); ^~~~~~ drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 loffset = le16_to_cpu(ent->offset); ^~~~~~~ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len': drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le16_to_cpu(ent.len); ^ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id': drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning, and we can remove the CONFIG_OF dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-06-23Merge tag 'imx-fixes-4.18' of ↵Olof Johansson1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.18: - Fix i.MX6SX PCIe MSI interrupt number, so that MSI IRQs can be properly propagated to the upstream interrupt controller. - Fix GPCv2 MIPI/PCIe/USB_HSIC's PGC offset. The values in Reference Manual are incorrect. - Correct SDMA setting for i.MX6Q SPI5 device to fix the issue, that the SPI controller RX FIFO was not empty after a DMA transfer, and the driver gets stuck in the next PIO transfer when reading one word more than expected. * tag 'imx-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx: fix irq for pcie bridge soc: imx: gpcv2: correct PGC offset ARM: dts: imx6q: Use correct SDMA script for SPI5 core Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23Merge tag 'renesas-fixes-for-v4.18' of ↵Olof Johansson1-6/+29
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v4.18 Make PM domain initialization more robust in Renesas R-Car SYSC driver. This resolves a regression due to re-parenting of PM domains by 086b399965a7ee7e ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}"). * tag 'renesas-fixes-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-sysc: Make PM domain initialization more robust Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-17soc: imx: gpcv2: correct PGC offsetAnson Huang1-4/+9
Correct MIPI/PCIe/USB_HSIC's PGC offset based on design RTL, the values in the Reference Manual (Rev. 1, 01/2018 and the older ones) are incorrect. The correct offset values should be as below: 0x800 ~ 0x83F: PGC for core0 of A7 platform; 0x840 ~ 0x87F: PGC for core1 of A7 platform; 0x880 ~ 0x8BF: PGC for SCU of A7 platform; 0xA00 ~ 0xA3F: PGC for fastmix/megamix; 0xC00 ~ 0xC3F: PGC for MIPI PHY; 0xC40 ~ 0xC7F: PGC for PCIe_PHY; 0xC80 ~ 0xCBF: PGC for USB OTG1 PHY; 0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY; 0xD00 ~ 0xD3F: PGC for USB HSIC PHY; Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-15treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAXStefan Agner1-2/+2
With PHYS_ADDR_MAX there is now a type safe variant for all bits set. Make use of it. Patch created using a semantic patch as follows: // <smpl> @@ typedef phys_addr_t; @@ -(phys_addr_t)ULLONG_MAX +PHYS_ADDR_MAX // </smpl> Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds4-11/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook1-1/+2
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook3-9/+11
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Merge tag 'armsoc-late' of ↵Linus Torvalds8-25/+1145
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "This is a branch with a few merge requests that either came in late, or took a while longer for us to review and merge than usual and thus cut it a bit close to the merge window. We stage them in a separate branch and if things look good, we still send them up -- and that's the case here. This is mostly DT additions for Renesas platforms, adding IP block descriptions for existing and new SoCs. There are also some driver updates for Qualcomm platforms for SMEM/QMI and GENI, which is their generalized serial protocol interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits) soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver arm64: dts: renesas: salvator-common: Add ADV7482 support ARM: dts: r8a7740: Add CEU1 ARM: dts: r8a7740: Add CEU0 arm64: dts: renesas: salvator-common: enable VIN arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node ...
2018-06-11Merge tag 'armsoc-drivers' of ↵Linus Torvalds9-272/+275
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This contains platform-related driver updates for ARM and ARM64. Highlights: - ARM SCMI (System Control & Management Interface) driver cleanups - Hisilicon support for LPC bus w/ ACPI - Reset driver updates for several platforms: Uniphier, - Rockchip power domain bindings and hardware descriptions for several SoCs. - Tegra memory controller reset improvements" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits) ARM: tegra: fix compile-testing PCI host driver soc: rockchip: power-domain: add power domain support for px30 dt-bindings: power: add binding for px30 power domains dt-bindings: power: add PX30 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3228 dt-bindings: power: add binding for rk3228 power domains dt-bindings: power: add RK3228 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3128 dt-bindings: power: add binding for rk3128 power domains dt-bindings: power: add RK3128 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3036 dt-bindings: power: add binding for rk3036 power domains dt-bindings: power: add RK3036 SoCs header for power-domain dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Register SMMU after MC driver became ready soc: mediatek: remove unneeded semicolon soc: mediatek: add a fixed wait for SRAM stable soc: mediatek: introduce a CAPS flag for scp_domain_data soc: mediatek: reuse regmap_read_poll_timeout helpers ...
2018-06-11Merge tag 'armsoc-soc' of ↵Linus Torvalds9-3/+138
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) MAINTAINERS: add NXP linux team maillist as i.MX reviewer ARM: stm32: Don't select DMA unconditionally on STM32MP157C arm64: defconfig: Enable PCIe on msm8996 and db820c ARM: pxa3xx: enable external wakeup pins ARM: pxa: stargate2: use device properties for at24 eeprom arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 ARM: berlin: switch to SPDX license identifier arm: berlin: remove non-necessary flush_cache_all() ARM: berlin: extend BG2CD Kconfig entry OMAP: CLK: CLKSRC: Add suspend resume hooks ARM: AM43XX: Add functions to save/restore am43xx control registers ASoC: ams_delta: use GPIO lookup table ARM: OMAP1: ams-delta: add GPIO lookup tables bus: ti-sysc: Fix optional clocks array access ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore ...
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-06-08soc: renesas: rcar-sysc: Make PM domain initialization more robustGeert Uytterhoeven1-6/+29
The quirk for R-Car E3 ES1.0 added in commit 086b399965a7ee7e ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}") makes the 3DG-A PM domain a subdomain of the 3DG-B PM domain. However, registering 3DG-A with its parent fails silently, as the 3DG-B PM domain hasn't been registered yet, and such failures are never reported. Fix this by: 1. Splitting PM Domain initialization in two steps, so all PM domains are registered before any child-parent links are established, 2. Reporting any failures in establishing child-parent relations. Check for and report pm_genpd_init() failures, too, as that function gained a return value in commit 7eb231c337e00735 ("PM / Domains: Convert pm_genpd_init() to return an error code"). Fixes: 086b399965a7ee7e ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-22/+90
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-06Merge tag 'overflow-v4.18-rc1' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06treewide: Use struct_size() for devm_kmalloc() and friendsKees Cook2-4/+3
Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06Merge tag 'sound-4.18-rc1' of ↵Linus Torvalds3-0/+388
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "We've got many code additions at this cycle as a result of quite a few new drivers. Below are highlights: Core stuff: - Fix the long-standing issue with the device registration order; the control device is now registered at last - PCM locking code cleanups for RT kernels - Fixes for possible races in ALSA timer resolution accesses - TLV offset definitions in uapi ASoC: - Many fixes for the topology stuff, including fixes for v4 ABI compatibility - Lots of cleanups / quirks for Intel platforms based on Realtek CODECs - Continued componentization works, removing legacy CODEC stuff - Conversion of OMAP DMA to the new, more standard SDMA-PCM driver - Fixes and updates to Cirrus Logic SoC drivers - New Qualcomm DSP support - New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306 and RT5668 and TI TSCS454 HD-audio: - Finally better support for some CA0132 boards, allowing Windows firmware - HP Spectre x360 support along with a bulk of COEF stuff - Blacklisting power save default some known boards reported on Fedora USB-audio: - Continued improvements on UAC3 support; now BADD is supported - Fixes / improvements for Dell WD15 dock - Allow DMA coherent pages for PCM buffers for ARCH, MIPS & co Others: - New Xen sound frontend driver support - Cache implementation and other improvements for FireWire DICE - Conversions to octal permissions in allover places" * tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (386 commits) ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it ALSA: usb-audio: remove redundant check on err ASoC: topology: Move skl-tplg-interface.h to uapi ASoC: topology: Move v4 manifest header data structures to uapi ASoC: topology: Improve backwards compatibility with v4 topology files ALSA: pci/hda: Remove unused, broken, header file ASoC: TSCS454: Add Support ASoC: Intel: kbl: Move codec sysclk config to codec_init function ASoC: simple-card: set cpu dai clk in hw_params ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream() ALSA: oxygen: use match_string() helper ASoC: dapm: use match_string() helper ASoC: max98095: use match_string() helper ASoC: max98088: use match_string() helper ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks ASoC: mt6797-mt6351: add hostless phone call path ASoC: mt6797: add Hostless DAI ASoC: mt6797: add PCM interface ASoC: mediatek: export mtk-afe symbols as needed ASoC: codecs: PCM1789: include gpio/consumer.h ...
2018-06-05Merge tag 'pm-4.18-rc1' of ↵Linus Torvalds1-7/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a significant update of the generic power domains (genpd) and Operating Performance Points (OPP) frameworks, mostly related to the introduction of power domain performance levels, cpufreq updates (new driver for Qualcomm Kryo processors, updates of the existing drivers, some core fixes, schedutil governor improvements), PCI power management fixes, ACPI workaround for EC-based wakeup events handling on resume from suspend-to-idle, and major updates of the turbostat and pm-graph utilities. Specifics: - Introduce power domain performance levels into the the generic power domains (genpd) and Operating Performance Points (OPP) frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter). - Fix two issues in the runtime PM framework related to the initialization and removal of devices using device links (Ulf Hansson). - Clean up the initialization of drivers for devices in PM domains (Ulf Hansson, Geert Uytterhoeven). - Fix a cpufreq core issue related to the policy sysfs interface causing CPU online to fail for CPUs sharing one cpufreq policy in some situations (Tao Wang). - Make it possible to use platform-specific suspend/resume hooks in the cpufreq-dt driver and make the Armada 37xx DVFS use that feature (Viresh Kumar, Miquel Raynal). - Optimize policy transition notifications in cpufreq (Viresh Kumar). - Improve the iowait boost mechanism in the schedutil cpufreq governor (Patrick Bellasi). - Improve the handling of deferred frequency updates in the schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki, Viresh Kumar). - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin). - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh Kumar). - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set and update stale comments in the PCI core PM code (Rafael Wysocki). - Work around an issue related to the handling of EC-based wakeup events in the ACPI PM core during resume from suspend-to-idle if the EC has been put into the low-power mode (Rafael Wysocki). - Improve the handling of wakeup source objects in the PM core (Doug Berger, Mahendran Ganesh, Rafael Wysocki). - Update the driver core to prevent deferred probe from breaking suspend/resume ordering (Feng Kan). - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael Wysocki). - Make the core suspend/resume code and cpufreq support the RT patch (Sebastian Andrzej Siewior, Thomas Gleixner). - Consolidate the PM QoS handling in cpuidle governors (Rafael Wysocki). - Fix a possible crash in the hibernation core (Tetsuo Handa). - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Update the turbostat utility (fixes, cleanups, new CPU IDs, new command line options, built-in "Low Power Idle" counters support, new POLL and POLL% columns) and add an entry for it to MAINTAINERS (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner, Prarit Bhargava, Srinivas Pandruvada). - Update the pm-graph to version 5.1 (Todd Brandt). - Update the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits) tools/power turbostat: update version number tools/power turbostat: Add Node in output tools/power turbostat: add node information into turbostat calculations tools/power turbostat: remove num_ from cpu_topology struct tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node tools/power turbostat: track thread ID in cpu_topology tools/power turbostat: Calculate additional node information for a package tools/power turbostat: Fix node and siblings lookup data tools/power turbostat: set max_num_cpus equal to the cpumask length tools/power turbostat: if --num_iterations, print for specific number of iterations tools/power turbostat: Add Cannon Lake support tools/power turbostat: delete duplicate #defines x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: add POLL and POLL% column tools/power turbostat: Fix --hide Pk%pc10 tools/power turbostat: Build-in "Low Power Idle" counters support tools/power turbostat: Don't make man pages executable tools/power turbostat: remove blank lines tools/power turbostat: a small C-states dump readability immprovement ...
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-36/+0
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-02Merge tag 'mips_fixes_4.17_3' of ↵Linus Torvalds1-36/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from James Hogan: "A final few MIPS fixes for 4.17: - drop Lantiq gphy reboot/remove reset (4.14) - prctl(PR_SET_FP_MODE): Disallow PRE without FR (4.0) - ptrace(PTRACE_PEEKUSR): Fix 64-bit FGRs (3.15)" * tag 'mips_fixes_4.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests MIPS: lantiq: gphy: Drop reboot/remove reset asserts
2018-05-26Merge tag 'renesas-soc-for-v4.18' of ↵Olof Johansson9-3/+138
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Renesas ARM Based SoC Updates for v4.18 * SoC - Change platform dependency to ARCH_RENESAS This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near future. - Add the to Kconfig RZ/N1D (r9a06g032) SoC - Identify R-Car E3 (r8a77990) SoC - Identify and add minimal support for RZ/G1C (r8a77470) SoC * R-Car SYSC - Add support for R-Car E3 (r8a77990) SoC - Remove unused inclusion of <linux/sys_soc.h>, - Make r8a77995_areas[] const. * R-Car Reset - Add support for R-Car E3 (r8a77990) SoC * Debug-LL - Add support for RZ/G1C (r8a77470) SoC * tag 'renesas-soc-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B} soc: renesas: rcar-sysc: Add support for R-Car E3 power areas arm: shmobile: Add the RZ/N1D (R9A06G032) to the shmobile Kconfig arm: shmobile: Change platform dependency to ARCH_RENESAS soc: renesas: r8a77995-sysc: Cleanups soc: renesas: rcar-rst: Add support for R-Car E3 soc: renesas: Add r8a77990 SYSC PM Domain Binding Definitions soc: renesas: identify R-Car E3 ARM: debug-ll: Add support for r8a77470 ARM: shmobile: Add the RZ/N1 arch to the shmobile Kconfig ARM: shmobile: r8a77470: basic SoC support soc: renesas: rcar-sysc: Add r8a77470 support soc: renesas: rcar-rst: Add support for RZ/G1C soc: renesas: Identify RZ/G1C Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-26Merge tag 'qcom-drivers-for-4.18' of ↵Olof Johansson8-25/+1145
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/late Qualcomm ARM Based Driver Updates for v4.18 * Various SMEM updates/fixes * Add qcom_smem_virt_to_phys SMEM API * Update MAINTAINERS to include qcom_scm pattern * Add Qualcomm Command DB driver * Add Qualcomm SCM compatible for IPQ4019 * Add MSM8998 to smd-rpm compatible list * Add Qualcomm GENI based QUP wrapper * Fix Qualcomm QMI buffer sizing bug * tag 'qcom-drivers-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver soc: qcom: Add GENI based QUP Wrapper driver soc: qcom: smd-rpm: Add msm8998 compatible firmware: qcom: scm: Add ipq4019 soc compatible Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-25Merge tag 'v4.18-rockchip-drivers-2' of ↵Olof Johansson1-0/+115
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Power-domain support for Rockchip socs px30, rk3128, rk3228 and rk3036. * tag 'v4.18-rockchip-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: power-domain: add power domain support for px30 dt-bindings: power: add binding for px30 power domains dt-bindings: power: add PX30 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3228 dt-bindings: power: add binding for rk3228 power domains dt-bindings: power: add RK3228 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3128 dt-bindings: power: add binding for rk3128 power domains dt-bindings: power: add RK3128 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3036 dt-bindings: power: add binding for rk3036 power domains dt-bindings: power: add RK3036 SoCs header for power-domain Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-25soc: qcom: smem: introduce qcom_smem_virt_to_phys()Alex Elder1-0/+27
Create function qcom_smem_virt_to_phys(), which returns the physical address corresponding to a given SMEM item's virtual address. This feature is required for a driver that will soon be out for review. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25soc: qcom: qmi: fix a buffer sizing bugAlex Elder1-2/+3
In qmi_handle_init(), a buffer is allocated for to hold messages received through the handle's socket. Any "normal" messages (expected by the caller) will have a header prepended, so the buffer size is adjusted to accomodate that. The buffer must also be of sufficient size to receive control messages, so the size is increased if necessary to ensure these will fit. Unfortunately the calculation is done wrong, making it possible for the calculated buffer size to be too small to hold a "normal" message. Specifically, if: recv_buf_size > sizeof(struct qrtr_ctrl_pkt) - sizeof(struct qmi_header) AND recv_buf_size < sizeof(struct qrtr_ctrl_pkt) the current logic will use sizeof(struct qrtr_ctrl_pkt) as the receive buffer size, which is not enough to hold the maximum "normal" message plus its header. Currently this problem occurs for (13 < recv_buf_size < 20). This patch corrects this. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25soc: Unconditionally include qcom MakefileGuenter Roeck1-1/+1
Incoming Qualcomm changes for GENI, i2c [1], and cmd-db [2] are enabled with COMPILE_TEST in drivers/soc/qcom. For this to work, the Makefile in that directory has to be included unconditionally, rather than only if ARCH_QCOM is enabled. Example of the errors seen on allmodconfig with the GENI, i2c, and cmd-db patches applied: Kernel: arch/x86/boot/bzImage is ready (#1) ERROR: "geni_se_select_mode" [drivers/tty/serial/qcom_geni_serial.ko] undefined! ERROR: "geni_se_init" [drivers/tty/serial/qcom_geni_serial.ko] undefined! ERROR: "geni_se_config_packing" [drivers/tty/serial/qcom_geni_serial.ko] undefined! ERROR: "geni_se_resources_on" [drivers/tty/serial/qcom_geni_serial.ko] undefined! ERROR: "geni_se_resources_off" [drivers/tty/serial/qcom_geni_serial.ko] undefined! ERROR: "geni_se_tx_dma_unprep" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined! ERROR: "geni_se_tx_dma_prep" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined! ERROR: "geni_se_rx_dma_unprep" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined! ERROR: "geni_se_rx_dma_prep" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined! ERROR: "geni_se_select_mode" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined! ERROR: "geni_se_config_packing" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined! ERROR: "geni_se_init" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined! ERROR: "geni_se_resources_off" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined! ERROR: "geni_se_resources_on" [drivers/i2c/busses/i2c-qcom-geni.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 make: *** [Makefile:1237: modules] Error 2 [1] https://patchwork.ozlabs.org/cover/893437/ [2] https://lkml.org/lkml/2018/4/10/714 Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25soc: qcom: smem: check sooner in qcom_smem_set_global_partition()Alex Elder1-5/+5
There's no sense in scanning the partition table again if we know the global partition has already been discovered. Check for a non-null global_partition pointer in qcom_smem_set_global_partition() immediately. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25soc: qcom: smem: fix qcom_smem_set_global_partition()Alex Elder1-3/+6
If there is at least one entry in the partition table, but no global entry, the qcom_smem_set_global_partition() should return an error just like it does if there are no partition table entries. It turns out the function still returns an error in this case, but it waits to do so until it has mistakenly treated the last entry in the table as if it were the global entry found. Fix the function to return immediately if no global entry is found in the table. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()Alex Elder1-1/+1
It's OK if the space for a newly-allocated uncached entry actually touches the free cached space boundary. It's only a problem if it would cross it. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25soc: qcom: smem: byte swap values properlyAlex Elder1-9/+9
Two places report an error when a partition header is found to not contain the right canary value. The error messages do not properly byte swap the host ids. Fix this, and adjust the format specificier to match the 16-bit unsigned data type. Move the error handling for a bad canary value to the end of qcom_smem_alloc_private(). This avoids some long lines, and reduces the distraction of handling this unexpected problem. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25soc: qcom: smem: return proper type for cached entry functionsAlex Elder1-3/+5
What phdr_to_last_uncached_entry() returns is the address of the start of the free space following all allocated uncached entries. It really doesn't refer to an actual (initialized) private entry structure. Similarly phdr_to_last_cached_entry() returns the address of the end of free space, preceding the last allocated cache entry. Change both functions' return type to be pointer to void to reflect this. Meanwhile, phdr_to_first_cached_entry() really *does* point to a private entry structure, so change its return type to reflect this fact. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25soc: qcom: smem: fix first cache entry calculationAlex Elder1-1/+2
Cached items are found at the high end of an smem partition. A cached item's shared memory precedes the private entry structure that describes it. The address of the structure describing the first cached item should be returned by phdr_to_first_cached_entry(). However the function calculates the start address using the wrong structure size. Fix this by computing the first item's entry structure address by subtracting the size of a private entry structure rather than a partition header structure. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25soc: qcom: cmd-db: Make endian-agnosticStephen Boyd1-62/+69
This driver deals with memory that is stored in little-endian format. Update the structures with the proper little-endian types and then do the proper conversions when reading the fields. Note that we compare the ids with a memcmp() because we already pad out the string 'id' field to exactly 8 bytes with the strncpy() onto the stack. Cc: Mahesh Sivasubramanian <msivasub@codeaurora.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Evan Green <evgreen@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25drivers: qcom: add command DB driverMahesh Sivasubramanian3-0/+320
Command DB is a simple database in the shared memory of QCOM SoCs, that provides information regarding shared resources. Some shared resources in the SoC have properties that are probed dynamically at boot by the remote processor. The information pertaining to the SoC and the platform are made available in the shared memory. Drivers can query this information using predefined strings. Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25Merge tag 'imx-drivers-4.18' of ↵Olof Johansson2-12/+28
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers i.MX drivers update for 4.18: - Use platform_device_add_data() instead of a pointer to a static memory in gpc/gpcv2 driver for platform data passing, so that we can avoid a BUG() when calling platform_device_put(). * tag 'imx-drivers-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpc: Do not pass static memory as platform data soc: imx: gpcv2: Do not pass static memory as platform data Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-24MIPS: lantiq: gphy: Drop reboot/remove reset assertsMathias Kresin1-36/+0
While doing a global software reset, these bits are not cleared and let some bootloader fail to initialise the GPHYs. The bootloader don't expect the GPHYs in reset, as they aren't during power on. The asserts were a workaround for a wrong syscon-reboot mask. With a mask set which includes the GPHY resets, these resets aren't required any more. Fixes: 126534141b45 ("MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfd") Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/19003/ [jhogan@kernel.org: Fix build warnings] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-05-23soc: rockchip: power-domain: add power domain support for px30Finley Xiao1-0/+30
This driver is modified to support PX30 SoC. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-05-23soc: rockchip: power-domain: add power domain support for rk3228Elaine Zhang1-0/+28
This driver is modified to support RK3228 SoC. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-05-23soc: rockchip: power-domain: add power domain support for rk3128Elaine Zhang1-0/+24
This driver is modified to support RK3128 SoC. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-05-23soc: rockchip: power-domain: add power domain support for rk3036Caesar Wang1-0/+33
This driver is modified to support RK3036 SoC. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-05-17soc: qcom: apr: fix invalid msg_type checkSrinivas Kandagatla1-1/+1
Removed invalid msg_type check. This also fixes below static checker warning: apr.c:95:35: warning: comparison is always true due to limited range of data type [-Wtype-limits] warn: always true condition '(msg_type != 69864) => (0-u16max != 69864)' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-16soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}Yoshihiro Shimoda1-1/+36
This patch adds workaround for 3DG-{A,B} of R-Car E3 ES1.0 because the SoC has a restriction about the order. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-16soc: renesas: rcar-sysc: Add support for R-Car E3 power areasTakeshi Kihara5-0/+43
This patch adds Cortex-A53 CPU{0,1}, Cortex-A53 SCU, Cortex-R7, A3VC, A2VC1 and 3DG-{A,B} power domain areas for the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [shimoda: fix 3DG-{A,B} and add SPDX-License-Identifier] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-15Merge tag 'v4.18-rockchip-drivers-1' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Fix for an issue introduced in 2016 where some powerdomains could only be turned off but not on again. * tag 'v4.18-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: power-domain: Fix wrong value when power up pd with writemask Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-15Merge tag 'v4.17-next-soc' of ↵Olof Johansson3-144/+82
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers - use timeout helpers for scpsys and infracfg drivers - use of_device_get_match_data in pmic wrapper and scpsys * tag 'v4.17-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: remove unneeded semicolon soc: mediatek: add a fixed wait for SRAM stable soc: mediatek: introduce a CAPS flag for scp_domain_data soc: mediatek: reuse regmap_read_poll_timeout helpers regmap: include <linux/ktime.h> from include/linux/regmap.h soc: mediatek: reuse read[l,x]_poll_timeout helpers soc: mediatek: use of_device_get_match_data() Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14Merge tag 'samsung-drivers-4.18' of ↵Olof Johansson1-89/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Samsung soc drivers changes for v4.18 1. Clock operations during power domain on/off were moved to respective clock driver so clean up obsolete code from power domain driver. * tag 'samsung-drivers-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: pm_domains: Deprecate support for clocks Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14soc: mediatek: remove unneeded semicolonSean Wang1-1/+1
Fix up drivers/soc/mediatek/mtk-scpsys.c:255:2-3: Unneeded semicolon accidently being added in commit f9e2f65dd561 ("soc: mediatek: add a fixed wait for SRAM stable"). Fixes: f9e2f65dd561 ("soc: mediatek: add a fixed wait for SRAM stable") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-14soc: mediatek: add a fixed wait for SRAM stableSean Wang1-6/+17
MT7622_POWER_DOMAIN_WB doesn't send an ACK when its managed SRAM becomes stable, which is not like the behavior the other power domains should have. Therefore, it's necessary for such a power domain to have a fixed and well-predefined duration to wait until its managed SRAM can be allowed to access by all functions running on the top. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 14:42:23 +0000