summaryrefslogtreecommitdiff
path: root/drivers/scsi/be2iscsi
AgeCommit message (Collapse)AuthorFilesLines
2016-02-23be2iscsi: add checks for dma mapping errorsAlexey Khoroshilov1-6/+14
hwi_write_buffer() does not check if mapping dma memory succeed. The patch adds the check and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Acked-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Update the driver versionJitendra Bhivare1-1/+1
Driver version: 11.0.0.0 Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix WRB leak in login/logout pathJitendra Bhivare1-23/+49
Login/Logout loop was hanging after few hours. /var/log/message showed that alloc_wrb_handle() function was not able to allocate any new WRB. Sep 11 11:25:22 Jhelum10 kernel: connection32513:0: Could not send nopout Sep 11 11:25:22 Jhelum10 kernel: scsi host10: BM_4989 : Alloc of WRB_HANDLE Failed for the CID : 384 Sep 11 11:25:22 Jhelum10 kernel: connection32513:0: Could not allocate pdu for mgmt task. Driver allocates WRB to pass login negotiated parameters information to FW in beiscsi_offload_connection(). This allocated WRB was not freed so there was WRB_Leak happening. Put WRB used for posting the login-negotiated parameters back in pool. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix async link event processingJitendra Bhivare3-48/+34
Use only port_link_status only to determine link state change. Only bit 0 is used to get the state. Remove code for processing port_fault. Fixed get_nic_conf structure definition. Removed rsvd[23] field in be_cmd_get_nic_conf_resp. Moved definitions of struct field values below the field. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix to process 25G link speed info from FWJitendra Bhivare5-83/+21
Async link event provides port_speed info. Cache the port_speed info and use the same to report in ISCSI_HOST_PARAM_PORT_SPEED query. Removed link status query IOCTL used to do the same. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix IOPOLL implementationJitendra Bhivare4-42/+52
OS not responding when running 2 port traffic on 72 CPUs system. be2iscsi IRQs gets affined to CPU0 when irqbalancer is disabled. be_iopoll processing completions in BLOCK_IOPOLL_SOFTIRQ hogged CPU0. 1. Use budget to exit the polling loop. beiscsi_process_cq didn't honour it. 2. Rearming of EQ is done only after iopoll completes. [mkp: Fixed up blk_iopoll -> irq_poll transition] Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix return value for MCC completionJitendra Bhivare1-1/+1
Change return value of completed MCC EBUSY to EINVAL. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Add FW config validationJitendra Bhivare3-67/+125
System crash in I+T card personality. Fix to add validation for ULP in initiator mode, physical port number, and supported queue, icd, cid counts. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix to handle misconfigured optics eventsJitendra Bhivare6-85/+199
Log messages for misconfigured transceivers reported by FW. Register async events that driver handles using MCC_CREATE_EXT ioctl. Errors messages for faulted/uncertified/unqualified optics are logged. Added IOCTL to get port_name to be displayed in error message. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix VLAN support for IPv6 networkJitendra Bhivare1-0/+4
Configuring VLAN parameters through IPv6 interface was not supported in driver. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix to remove shutdown entry pointJitendra Bhivare4-37/+9
Null pointer dereference in shutdown path after taking dump. Shutdown path is not needed as FW comes up clean every time during probe after issuing FUNCTION reset MBOX command. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Added return value check for mgmt_get_all_if_idJitendra Bhivare2-7/+10
Use of mutex_lock_interruptible can return -EINTR, handle and log the error. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Set mbox timeout to 30sJitendra Bhivare1-2/+3
FW recommended timeout for all mbox command is 30s. Use msleep instead mdelay to relinquish CPU when polling for mbox completion. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix to synchronize tag allocation using spin_lockJitendra Bhivare1-2/+4
alloc_mcc_tag needs to be done under mcc_lock. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix to use atomic bit operations for tag_stateJitendra Bhivare4-77/+84
beiscsi_mccq_compl sets MCC_TAG_STATE_TIMEOUT before setting up tag_mem_state. be_mcc_compl_process_isr checks for MCC_TAG_STATE_TIMEOUT first then accesses tag_mem_state which might be still getting populated in the process context. Fix: Set MCC_TAG_STATE_TIMEOUT after tag_mem_state is populated. Removed MCC_TAG_STATE_COMPLETED. When posted its in running state and the running state is cleared in be_mcc_compl_process_isr. be_mcc_notify now takes tag argument to set it to running state. Use bit operations for tag_state. Use barriers before setting the state. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix mbox synchronization replacing spinlock with mutexJitendra Bhivare4-88/+94
This is second part of actual fix for soft lockup. All mbox cmds issued using BMBX and MCC are synchronized using mutex mbox_lock instead of spin_lock. Used mutex_lock_interruptible where ever possible. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Shane Seymour <shane.seymour@hpe.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix soft lockup in mgmt_get_all_if_id path using bmbxJitendra Bhivare2-41/+51
We are taking mbox_lock spinlock which disables pre-emption before we poll for mbox completion. Waiting there with spinlock held in excess of 20s will cause soft lockup. Actual fix is to change mbox_lock to mutex. The changes are done in phases. This is the first part. 1. Changed mgmt_get_all_if_id to use MCC where after posting lock is released. 2. Changed be_mbox_db_ready_wait to busy wait for 12s max and removed wait_event_timeout. Added error handling code for IO reads. OPCODE_COMMON_QUERY_FIRMWARE_CONFIG mbox command takes 8s time when unreachable boot targets configured. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-11irq_poll: fold irq_poll_sched_prep into irq_poll_schedChristoph Hellwig1-4/+2
There is no good reason to keep them apart, and this makes using the API a bit simpler. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
2015-12-11irq_poll: don't disable new irq_poll instancesChristoph Hellwig1-2/+0
There is no good reason to start out disabled - drivers can control if the poll instance can be scheduled by simply not scheduling it yet. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
2015-12-11irq_poll: make blk-iopoll available outside the block layerChristoph Hellwig4-16/+17
The new name is irq_poll as iopoll is already taken. Better suggestions welcome. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
2015-11-12Merge tag '4.4-scsi-mkp' into miscJames Bottomley1-1/+1
SCSI queue for 4.4. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11be2iscsi: Fix bogus WARN_ON length checkTim Gardner1-1/+1
drivers/scsi/be2iscsi/be_main.c: In function 'be_sgl_create_contiguous': drivers/scsi/be2iscsi/be_main.c:3187:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] WARN_ON(!length > 0); gcc version 5.2.1 Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Jayamohan Kallickal <jayamohan.kallickal@avagotech.com> Cc: Minh Tran <minh.tran@avagotech.com> Cc: John Soni Jose <sony.john-n@avagotech.com> Cc: "James E.J. Bottomley" <JBottomley@odin.com> Reported-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-09be2iscsi: Bump the driver versionJohn Soni Jose1-1/+1
Signed-off-by: John Soni Jose <sony.john@avagotech.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09be2iscsi: Fix updating the next pointer during WRB postingJohn Soni Jose4-23/+75
While posting WRB the next_pointer of the current WRB should point to itself and the previous WRB next_pointer should point to the current WRB. The next pointer value was retrieved during alloc_pdu and was updated in wrb before ringing the doorbell. The fix retrieves the next_pointer just before ringing the doorbell and updates in the WRB. Signed-off-by: John Soni Jose <sony.john@avagotech.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27be2iscsi: Revert ownership to EmulexKetan Mukadam10-22/+22
We would like to get the following updates in: Revert ownership to "Emulex" from "Avago Technologies" Signed-off-by: Ketan Mukadam <ketan.mukadam@avagotech.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25be2iscsi : Bump the driver versionJohn Soni Jose1-1/+1
Bump the driver version [jejb: resolve conflict with 4627de9 MAINTAINERS, be2iscsi: change email domain] Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25be2iscsi : Logout of FW Boot SessionJohn Soni Jose4-0/+87
Once be2iscsi driver is loaded and operational close Boot session established by FW. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25be2iscsi : Fix memory check before unmapping.John Soni Jose1-3/+7
Check DMA memory before it is unmapped. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25be2iscsi : Fix memory leak in the unload pathJohn Soni Jose1-6/+12
Driver was not freeing the DMA memory allocated for EQ/CQ in the unload path. This patch frees the DMA memory during the driver unload. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25be2iscsi : Fix the PCI request region reserving.John Soni Jose1-4/+18
Reserve device PCI I/O and Memory resources. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25be2iscsi : Fix the retry count for boot targetsJohn Soni Jose3-3/+28
Increment the retry count to get the boot target info when port async event is received by the driver. Update sysfs enteries with the boot target parameters. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-18MAINTAINERS, be2iscsi: change email domainMinh Tran9-36/+36
be2iscsi change of ownership from Emulex to Avago Technologies recently. We like to get the following updates in: changed "Emulex" to "Avago Technologies", changed email addresses from "emulex.com" to "avagotech.com", updated MAINTAINER list for be2iscsi driver. Signed-off-by: Minh Tran <minh.tran@avagotech.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-08be2iscsi: Fix kernel panic when device initialization failsJohn Soni Jose1-1/+1
Kernel panic was happening as iscsi_host_remove() was called on a host which was not yet added. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-03-06treewide: Fix typo in printk messagesMasanari Iida1-1/+1
This patch fix spelling typo in printk messages. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+0
Pull misc SCSI patches from James Bottomley: "This is a short patch set representing a couple of left overs from the merge window (debug removal and MAINTAINER changes). Plus one merge window regression (the local workqueue for hpsa) and a set of bug fixes for several issues (two for scsi-mq and the rest an assortment of long standing stuff, all cc'd to stable)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sg: fix EWOULDBLOCK errors with scsi-mq sg: fix unkillable I/O wait deadlock with scsi-mq sg: fix read() error reporting wd719x: add missing .module to wd719x_template hpsa: correct compiler warnings introduced by hpsa-add-local-workqueue patch fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit. fcoe: Transition maintainership to Vasu am53c974: remove left-over debugging code
2015-02-15fixed invalid assignment of 64bit mask to host dma_boundary for scatter ↵Minh Duc Tran1-1/+0
gather segment boundary limit. In reference to bug https://bugzilla.redhat.com/show_bug.cgi?id=1097141 Assert is seen with AMD cpu whenever calling pci_alloc_consistent. [ 29.406183] ------------[ cut here ]------------ [ 29.410505] kernel BUG at lib/iommu-helper.c:13! Signed-off-by: Minh Tran <minh.tran@emulex.com> Fixes: 6733b39a1301b0b020bbcbf3295852e93e624cb1 Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-13MODULE_DEVICE_TABLE: fix some callsitesAndrew Morton1-1/+0
The patch "module: fix types of device tables aliases" newly requires that invocations of MODULE_DEVICE_TABLE(type, name); come *after* the definition of `name'. That is reasonable, but some drivers weren't doing this. Fix them. Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: David Miller <davem@davemloft.net> Cc: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig1-1/+1
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig1-1/+1
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-09-30be2iscsi: check ip buffer before copyingMike Christie1-5/+8
Dan Carpenter found a issue where be2iscsi would copy the ip from userspace to the driver buffer before checking the len of the data being copied: http://marc.info/?l=linux-scsi&m=140982651504251&w=2 This patch just has us only copy what we the driver buffer can support. Cc: <stable@vger.kernel.org> Tested-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-30be2iscsi : Bump the driver versionJohn Soni Jose1-1/+1
Bump the driver version Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-30be2iscsi : Fix kernel panic during reboot/shutdownJohn Soni Jose1-1/+1
In the reboot/shutdown path, workqueue was destroyed after the adapter resource were freed. The task associated with workqueue was getting executed after resources were freed. This lead to kernel panic. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16be2iscsi: Use pci_enable_msix_range()Alexander Gordeev1-3/+3
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16be2iscsi: Bump the driver versionJayamohan Kallickal1-1/+1
Bump the driver version Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16be2iscsi: Fix processing CQE before connection resources are freedJayamohan Kallickal3-1/+46
Driver should process the completion queue entries before a connection resources are freed. While running mixed traffic due to latency, driver processes the CQE after the connection resources are freed. This fix processes all the completion queue before the connection resources are freed. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16be2iscsi: Fix updating the boot enteries in sysfsJayamohan Kallickal4-2/+62
During port async event driver should check if there is any boot target configured on the adapter. Update sysfs enteries with the boot target parameters. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16be2iscsi: Fix the copyright yearJayamohan Kallickal9-9/+9
Change the copyright year to 2014 Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16be2iscsi: Fix the sparse warning introduced in previous submissionJayamohan Kallickal1-7/+7
commit 73af08e11c6638e2abd6b1fa13cdab58c2bbdbf8 Author: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Date: Mon May 5 21:41:26 2014 -0400 be2iscsi: Fix interrupt Coalescing mechanism. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 23:48:12 +0000