summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2006-03-22Merge branch 'upstream-linus' of ↵Linus Torvalds3-80/+35
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Use of uninitialized variable in drivers/net/depca.c [PATCH] Use after free in net/tulip/de2104x.c [PATCH] sis900 adm7001 PHY support [PATCH] sky2: more ethtool stats [PATCH] s390: qeth :allow setting of attribute "route6" to "no_router". [PATCH] s390: qeth driver cleanups [PATCH] s390: qeth driver statistics fixes [PATCH] AMD Au1xx0: fix Ethernet TX stats [PATCH] fix spidernet build issue
2006-03-22[PATCH] s390: qeth :allow setting of attribute "route6" to "no_router".Frank Pavlic1-5/+0
[patch 4/6] s390: qeth :allow setting of attribute "route6" to "no_router". From: Ursula Braun <braunu@de.ibm.com> when setting route6 attribute back to no_router qeth does not issue an IP ASSIST command to reset router value to no_router. Once primary_router is set device stays in this mode. Issue an IP ASSIST command when no_router is set in route6. Device will be reset and thus will not longer run as a primary router. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 5 ----- 1 files changed, 5 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] s390: qeth driver cleanupsFrank Pavlic3-55/+14
[patch 3/6] s390: qeth driver cleanups From: Ursula Braun <braunu@de.ibm.com> - code analyzing tool BEAM has found some unreachable and unnecessary statements and also conditions which are always true. - removed some useless MII code since OSA card will never allow to set such values. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 49 ++++--------------------------------------------- qeth_proc.c | 18 +++++++++--------- qeth_sys.c | 2 +- 3 files changed, 14 insertions(+), 55 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] s390: qeth driver statistics fixesFrank Pavlic2-20/+21
[patch 2/6] s390: qeth driver statistics fixes From: Ursula Braun <braunu@de.ibm.com> - display "unsigned int" values in /proc/qeth_perf with %u instead of %i - omit qdio header length when increasing card->stats.tx_bytes Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 3 ++- qeth_proc.c | 38 +++++++++++++++++++------------------- 2 files changed, 21 insertions(+), 20 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22Fix "frist", "fisrt", typosUwe Zeisberger1-1/+1
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-18[PATCH] regularize blk_cleanup_queue() useAl Viro1-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-14[PATCH] "s390: multiple subchannel sets support" fixGreg Smith1-0/+3
It seems this patch got dropped (it was in addition to the `s390: improve response code handling in chsc_enable_facility()' patch). Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-14Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds3-7/+13
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] zfcp: fix device registration issues [SCSI] scsi_transport_fc: fix FC_HOST_NUM_ATTRS [SCSI] scsi: aha152x pcmcia driver needs spi transport [SCSI] zfcp: correctly set this_id for hosts [SCSI] Add Brownie to blacklist
2006-03-09[PATCH] s390: dasd proc interface typoHorst Hummel1-1/+1
This fixes a typo introduced with 90f0094dc607abe384a412bfb7199fb667ab0735. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-09[SCSI] zfcp: fix device registration issuesAndreas Herrmann3-6/+12
The patch fixes following issues: (1) Replace scsi_add_device with scsi_scan_target. (Thus the rport instead of the scsi_host becomes parent of a scsi_target again.) (2) Avoid scsi_device allocation during registration of an remote port. (Would be done during fc_scsi_scan_rport.) (3) Fix queuecommand behaviour when an zfcp unit is blocked. (Call scsi_done with DID_NO_CONNECT instead of returning SCSI_MLQUEUE_DEVICE_BUSY otherwise we might end up waiting for completion in blk_execute_rq for ever.) Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-08[PATCH] s390: dasd partition detectionHorst Hummel4-14/+36
DASD allows to open a device as soon as gendisk is registered, which means the device is a fake device (capacity=0) and we do know nothing about blocksize and partitions at that point of time. In case the device is opened by someone, the bdev and inode creation is done with the fake device info and the following partition detection code is just using the wrong data. To avoid this modify the DASD state machine to make sure that the open is rejected until the device analysis is either finished or an unformatted device was detected. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08[PATCH] s390: iucv message limit for smsgMartin Schwidefsky1-1/+1
The message limit on the iucv connect call for the smsg module is too low. Therefore increase the smsg message limit to 255. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-06[PATCH] s390: improve response code handling in chsc_enable_facility()Cornelia Huck1-0/+5
Rather than checking for some known failures, check positively for the success response code 0x0001 and return -EIO for unrecognized failure response codes. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg Smith <gsmith@nc.rr.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-02[SCSI] zfcp: correctly set this_id for hostsAndreas Herrmann1-1/+1
It fixes a bug in zfcp which provokes a race in scsi_scan.c. Finally this can lead to an Oops like: kernel BUG at fs/sysfs/symlink.c:87! Correctly set this_id for the host. Otherwise we provoke a race between scsi_target_reap_work and concurrent scsi_add_device. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-20[PATCH] s390: revert dasd eer moduleHeiko Carstens7-1219/+4
Revert dasd eer module until we have a common understanding of how the interface should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] s390: dasd reference countingPeter Oberparleiter2-1/+21
When using the dasd diag discipline, the base discipline module (eckd or fba) can be unloaded, even though the dasd driver requires both discipline modules (base and diag) to work correctly. Implement reference counting for both base and diag discipline modules in order to fix this. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20[PATCH] s390: V=V qdio fixesFrank Pavlic1-2/+11
Using FCP devices with V=V support, the input queue stalled when CCQ 97 had been returned in qdio_do_eqbs. When this happen we have to reissue the eqbs instruction. Another bug was when V=V was enabled we checked if hardware has SIGA-sync support. If not we returned with 0 from tiqdio_is_inbound_q_done. Thus qdio lost initiative on FCP devices and input queue stalled. Running devices in V=V there is no SIGA-sync support but nevertheless we have to process tiqdio_is_inbound_q_done either. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: fix assignment instead of check in ccw_device_set_online()Cornelia Huck2-2/+1
Fix assignment instead of check in ccw_device_set_online(). Also remove unneeded assignment in ccw_device_do_sense(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: ccw device disbandingCornelia Huck1-1/+1
If __ccw_device_disband_start() fails to initiate disbanding, it should finish with ccw_device_disband_done() (which leaves the device in offline state) instead of ccw_device_verify_done() (which leaves the device in online state). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] s390: some qeth driver fixesFrank Pavlic3-77/+63
[patch 2/2] s390: some qeth driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - fixed kernel panic when using EDDP support in Layer 2 mode - NULL pointer exception in qeth_set_offline fixed. - setting EDDP in Layer 2 mode did not set NETIF_F_(SG/TSO) flags when device became online. - use sscanf for parsing and converting IPv4 addresses from string to __u8 values. - qeth_string_to_ipaddr6 fixed. in case of double colon the converted IPv6 address out from the string was not correct in previous implementation. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 112 +++++++++++++++++++++++++----------------------------------- qeth_eddp.c | 11 ++++- qeth_main.c | 17 +++------ 3 files changed, 63 insertions(+), 77 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] s390: lcs performance enhancementsFrank Pavlic2-15/+18
[patch 1/2] s390: lcs performance enhancements From: Klaus Wacker <kdwacker@de.ibm.com> - When flood pinging (with large packet size) an LCS device, about 90 % of all packets are dropped by driver. - increased number of lcs IO buffers to 32. - use netif_stop_queue/netif_wake_queue in lcs_start_xmit routine - don't lock the whole xmit routine but just the piece of code where tx_buffer is touched. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: lcs.c | 31 +++++++++++++++++-------------- lcs.h | 2 +- 2 files changed, 18 insertions(+), 15 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-16Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds7-157/+118
2006-02-12[SCSI] zfcp: fix: avoid race between fc_remote_port_add and scsi_add_deviceAndreas Herrmann1-0/+2
Flush workqueue of a scsi host after a remote port for that host is registered at the fc transport class. Otherwise immediate registration of a scsi device on that host is racy. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-12[SCSI] zfcp: fix logging during device resetMaxim Shchetynin5-61/+47
Avoid access to old fsf_requests if device reset is logged. Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-12[SCSI] zfcp: fix adapter erp when link is unpluggedAndreas Herrmann3-90/+69
Remove endless polling for replug of the local link. Just wait for link up notification. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-12[SCSI] zfcp: get rid of physical_wwpn and physical_s_idAndreas Herrmann2-6/+0
Remove all remainders of obsolete zfcp adapter attributes physical_wwpn and physical_s_id. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-11[PATCH] s390: fix sclp memory corruption in tty pages listPeter Oberparleiter1-8/+5
When the sclp interface takes very long to serve a request, the sclp core driver will report a failed request to the sclp tty driver even though the request is still being processed by the sclp interface. Eventually the sclp interface completes the request and updates some fields in the request buffer which leads to a corrupted tty pages list. The next time function sclp_tty_write_room is called, the corrupted list will be traversed, resulting in an oops. To avoid this remove the busy retry limit and increase retry intervals. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-11[PATCH] s390: fix locking in __chp_add() and s390_subchannel_remove_chpid()Cornelia Huck1-5/+5
Fix locking in __chp_add() and s390_subchannel_remove_chpid(): Need to disable/enable because they are always called from a thread (and not directly from a machine check...) Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] s390: fix to_channelpath macroCornelia Huck1-1/+1
Fix broken to_channelpath macro (fortunately worked in all current cases...). Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] s390: dasd extended error reporting moduleStefan Weinhuber7-4/+1219
The DASD extended error reporting is a facility that allows to get detailed information about certain problems in the DASD I/O. This information can be used to implement fail-over applications that can recover these problems. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] ebcdic do_kdsk_ioctl off-by-oneDavi Arnaut1-1/+5
Add a missing return check from strnlen_user and fixes a off-by-one when terminating the string with zero. Signed-off-by: Davi Arnaut <davi.arnaut@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] s390: Add missing memory constraint to stcrw()Peter Oberparleiter1-8/+9
Add missing memory constraint to stcrw() inline assembly. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] s390: Fix modalias for ccw devicesCornelia Huck1-1/+1
Fix modalias for ccw devices: cu_type should be in capitals as well. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] s390: dasd wait for clear i/o interruptHorst Hummel1-12/+33
The sleep_on function clears a running cqr without waiting for the related interrupt. This can lead to a panic at the time the interrupt is processed because the related memory might already be freed. Wait for clear-interrupt and de-queue cqr prior to return. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] s390: dasd open counterHorst Hummel1-1/+8
The open_count is increased for every opener, that includes the blkdev_get in dasd_scan_partitions. This tampers the open_count in BIODASDINFO. Hide the internal open from user-space. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] s390: ccw_device_probe_console return valuePeter Oberparleiter3-3/+5
The return code of ccw_device_probe_console() is not properly handled. It should only return a valid ccw device pointer or a error value converted by ERR_PTR. Fix the console driver code to check with IS_ERR instead against NULL. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] s390: hangcheck timer supportJan Glauber1-0/+7
Remove useless s390 define from hangcheck-timer, remove wrong definition of a TOD second and other s390 ifdefs. Use monotonic_clock instead. Add hangcheck-timer option, copied from drivers/char/Kconfig. This is ugly but unless we have a big Kconfig cleanup we cannot include drivers/char/Kconfig... Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] s390: Remove CVS generated informationHeiko Carstens76-218/+26
- Remove all CVS generated information like e.g. revision IDs from drivers/s390 and include/asm-s390 (none present in arch/s390). - Add newline at end of arch/s390/lib/Makefile to avoid diff message. Acked-by: Andreas Herrmann <aherrman@de.ibm.com> Acked-by: Frank Pavlic <pavlic@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds1-1/+1
2006-01-14[PATCH] s390: fix blk_queue_ordered call in dasd.c fixupHeiko Carstens1-1/+1
The QUEUE_ORDERED_* numbers got renumbered and by accident the dasd driver was changed to use QUEUE_ORDERED_DRAIN instead of QUEUE_ORDERED_TAG. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] s390: email-address changeCornelia Huck17-34/+35
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] s390: chps[] array too shortCornelia Huck1-1/+1
The chps[] array in struct channel_subsystem is one too short; therefore the code doesn't realize the chpid ff is already known. When several devices on chpid ff become available, the message "new_channel_path: could not register ff" is displayed for every device but the first one. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] s390: fix blk_queue_ordered call in dasdcMartin Schwidefsky1-1/+1
Add the missing third argument to the blk_queue_ordered call and use the constant QUEUE_ORDERED_DRAIN instead of "1". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15spelling: s/appropiate/appropriate/Adrian Bunk1-1/+1
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-14Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds9-102/+212
2006-01-14[SCSI] zfcp: transport class adaptations IIAndreas Herrmann6-38/+29
Replaced zfcp adapter attributes with fc_host attributes: fc_topology by port_type, physical_wwpn by permanent_port_name. Make use of fc_host attribute supported_speeds. Removed zfcp adapter attribute physical_s_id. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14[SCSI] zfcp: transport class adaptationsAndreas Herrmann6-64/+136
Added host stats, removed superfluous get_starget_ functions, removed some attributes from zfcp specific sysfs tree (e.g. scsi_host_no, scsi_lun, wwnn and d_id). Host stats are given for the physical adapter port not for the virtual adapter. Reset stats is implemented in the device driver. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14[SCSI] zfcp: handle unsolicited status notification lostMaxim Shchetynin2-0/+47
Handle unsolicited adapter status that informs about loss of previous unsolicited status notification(s). Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-13[PATCH] Add {css,ccw}_bus_type probe, remove, shutdown methods.Cornelia Huck3-28/+62
The following patch converts css_bus_type and ccw_bus_type to use the new bus_type methods. Signed-off-by: Cornelia Huck <huckc@de.ibm.com> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] Add ccwgroup_bus_type probe and remove methodsRussell King1-7/+9
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 12:21:03 +0000