summaryrefslogtreecommitdiff
path: root/drivers/pwm/sysfs.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-28pwm: sysfs: Replace sprintf() with sysfs_emit()Andy Shevchenko1-6/+6
While the uses in this code are unproblematic, it's generally safer for sysfs outputs to use the new sysfs_emit() helper instead of raw calls to sprintf() and friends. This also has the benefit of annotating the uses, which makes them easier to audit and potentially use them to generate sysfs documentation from them. This patch replaces existing sprintf() calls straightforwardly with the new helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-09-28pwm: sysfs: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Andy Shevchenko1-4/+4
Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: Allow store 64-bit duty cycle from sysfs interfaceJarkko Nikula1-2/+2
PWM core was converted to u64 by the commit a9d887dc1c60 ("pwm: Convert period and duty cycle to u64") but did not change the duty_cycle_store() so it will error out if trying to pass a numeric string bigger than 2^32-1. Fix this by using u64 and kstrtou64() in duty_cycle_store(). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Guru Das Srinagesh <gurus@codeaurora.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-06-17pwm: Convert period and duty cycle to u64Guru Das Srinagesh1-4/+4
Because period and duty cycle are defined as ints with units of nanoseconds, the maximum time duration that can be set is limited to ~2.147 seconds. Change their definitions to u64 in the structs of the PWM framework so that higher durations may be set. Also use the right format specifiers in debug prints in both core.c, pwm-stm32-lp.c as well as video/fbdev/ssd1307fb.c. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-07-09Merge tag 'pwm/for-5.3-rc1' of ↵Linus Torvalds1-0/+102
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes contains a new driver for SiFive SoCs as well as enhancements to the core (device links are used to track dependencies between PWM providers and consumers, support for PWM controllers via ACPI, sysfs will now suspend/resume PWMs that it has claimed) and various existing drivers" * tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits) pwm: fsl-ftm: Make sure to unlock mutex on failure pwm: fsl-ftm: Use write protection for prescaler & polarity pwm: fsl-ftm: More relaxed permissions for updating period pwm: atmel-hlcdc: Add compatible for SAM9X60 HLCDC's PWM pwm: bcm2835: Improve precision of PWM leds: pwm: Support ACPI via firmware-node framework pwm: Add support referencing PWMs from ACPI pwm: rcar: Remove suspend/resume support pwm: sysfs: Add suspend/resume support pwm: Add power management descriptions pwm: meson: Add documentation to the driver pwm: meson: Add support PWM_POLARITY_INVERSED when disabling pwm: meson: Don't cache struct pwm_state internally pwm: meson: Read the full hardware state in meson_pwm_get_state() pwm: meson: Simplify the calculation of the pre-divider and count pwm: meson: Move pwm_set_chip_data() to meson_pwm_request() pwm: meson: Add the per-channel register offsets and bits in a struct pwm: meson: Add the meson_pwm_channel data to struct meson_pwm pwm: meson: Pass struct pwm_device to meson_pwm_calc() pwm: meson: Don't duplicate the polarity internally ...
2019-06-26pwm: sysfs: Add suspend/resume supportYoshihiro Shimoda1-0/+102
According to the Documentation/pwm.txt, all PWM consumers should have power management. Since this sysfs interface is one of consumers so that this patch adds suspend/resume support. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> [thierry.reding@gmail.com: fix build warnings for !PM] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 44 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091651.032047323@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-20pwm: sysfs: fix typo "its" -> "it's"Uwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-20pwm: Fix deadlock warning when removing PWM devicePhong Hoang1-13/+1
This patch fixes deadlock warning if removing PWM device when CONFIG_PROVE_LOCKING is enabled. This issue can be reproceduced by the following steps on the R-Car H3 Salvator-X board if the backlight is disabled: # cd /sys/class/pwm/pwmchip0 # echo 0 > export # ls device export npwm power pwm0 subsystem uevent unexport # cd device/driver # ls bind e6e31000.pwm uevent unbind # echo e6e31000.pwm > unbind [ 87.659974] ====================================================== [ 87.666149] WARNING: possible circular locking dependency detected [ 87.672327] 5.0.0 #7 Not tainted [ 87.675549] ------------------------------------------------------ [ 87.681723] bash/2986 is trying to acquire lock: [ 87.686337] 000000005ea0e178 (kn->count#58){++++}, at: kernfs_remove_by_name_ns+0x50/0xa0 [ 87.694528] [ 87.694528] but task is already holding lock: [ 87.700353] 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.707405] [ 87.707405] which lock already depends on the new lock. [ 87.707405] [ 87.715574] [ 87.715574] the existing dependency chain (in reverse order) is: [ 87.723048] [ 87.723048] -> #1 (pwm_lock){+.+.}: [ 87.728017] __mutex_lock+0x70/0x7e4 [ 87.732108] mutex_lock_nested+0x1c/0x24 [ 87.736547] pwm_request_from_chip.part.6+0x34/0x74 [ 87.741940] pwm_request_from_chip+0x20/0x40 [ 87.746725] export_store+0x6c/0x1f4 [ 87.750820] dev_attr_store+0x18/0x28 [ 87.754998] sysfs_kf_write+0x54/0x64 [ 87.759175] kernfs_fop_write+0xe4/0x1e8 [ 87.763615] __vfs_write+0x40/0x184 [ 87.767619] vfs_write+0xa8/0x19c [ 87.771448] ksys_write+0x58/0xbc [ 87.775278] __arm64_sys_write+0x18/0x20 [ 87.779721] el0_svc_common+0xd0/0x124 [ 87.783986] el0_svc_compat_handler+0x1c/0x24 [ 87.788858] el0_svc_compat+0x8/0x18 [ 87.792947] [ 87.792947] -> #0 (kn->count#58){++++}: [ 87.798260] lock_acquire+0xc4/0x22c [ 87.802353] __kernfs_remove+0x258/0x2c4 [ 87.806790] kernfs_remove_by_name_ns+0x50/0xa0 [ 87.811836] remove_files.isra.1+0x38/0x78 [ 87.816447] sysfs_remove_group+0x48/0x98 [ 87.820971] sysfs_remove_groups+0x34/0x4c [ 87.825583] device_remove_attrs+0x6c/0x7c [ 87.830197] device_del+0x11c/0x33c [ 87.834201] device_unregister+0x14/0x2c [ 87.838638] pwmchip_sysfs_unexport+0x40/0x4c [ 87.843509] pwmchip_remove+0xf4/0x13c [ 87.847773] rcar_pwm_remove+0x28/0x34 [ 87.852039] platform_drv_remove+0x24/0x64 [ 87.856651] device_release_driver_internal+0x18c/0x21c [ 87.862391] device_release_driver+0x14/0x1c [ 87.867175] unbind_store+0xe0/0x124 [ 87.871265] drv_attr_store+0x20/0x30 [ 87.875442] sysfs_kf_write+0x54/0x64 [ 87.879618] kernfs_fop_write+0xe4/0x1e8 [ 87.884055] __vfs_write+0x40/0x184 [ 87.888057] vfs_write+0xa8/0x19c [ 87.891887] ksys_write+0x58/0xbc [ 87.895716] __arm64_sys_write+0x18/0x20 [ 87.900154] el0_svc_common+0xd0/0x124 [ 87.904417] el0_svc_compat_handler+0x1c/0x24 [ 87.909289] el0_svc_compat+0x8/0x18 [ 87.913378] [ 87.913378] other info that might help us debug this: [ 87.913378] [ 87.921374] Possible unsafe locking scenario: [ 87.921374] [ 87.927286] CPU0 CPU1 [ 87.931808] ---- ---- [ 87.936331] lock(pwm_lock); [ 87.939293] lock(kn->count#58); [ 87.945120] lock(pwm_lock); [ 87.950599] lock(kn->count#58); [ 87.953908] [ 87.953908] *** DEADLOCK *** [ 87.953908] [ 87.959821] 4 locks held by bash/2986: [ 87.963563] #0: 00000000ace7bc30 (sb_writers#6){.+.+}, at: vfs_write+0x188/0x19c [ 87.971044] #1: 00000000287991b2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1e8 [ 87.978872] #2: 00000000f739d016 (&dev->mutex){....}, at: device_release_driver_internal+0x40/0x21c [ 87.988001] #3: 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.995481] [ 87.995481] stack backtrace: [ 87.999836] CPU: 0 PID: 2986 Comm: bash Not tainted 5.0.0 #7 [ 88.005489] Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT) [ 88.012791] Call trace: [ 88.015235] dump_backtrace+0x0/0x190 [ 88.018891] show_stack+0x14/0x1c [ 88.022204] dump_stack+0xb0/0xec [ 88.025514] print_circular_bug.isra.32+0x1d0/0x2e0 [ 88.030385] __lock_acquire+0x1318/0x1864 [ 88.034388] lock_acquire+0xc4/0x22c [ 88.037958] __kernfs_remove+0x258/0x2c4 [ 88.041874] kernfs_remove_by_name_ns+0x50/0xa0 [ 88.046398] remove_files.isra.1+0x38/0x78 [ 88.050487] sysfs_remove_group+0x48/0x98 [ 88.054490] sysfs_remove_groups+0x34/0x4c [ 88.058580] device_remove_attrs+0x6c/0x7c [ 88.062671] device_del+0x11c/0x33c [ 88.066154] device_unregister+0x14/0x2c [ 88.070070] pwmchip_sysfs_unexport+0x40/0x4c [ 88.074421] pwmchip_remove+0xf4/0x13c [ 88.078163] rcar_pwm_remove+0x28/0x34 [ 88.081906] platform_drv_remove+0x24/0x64 [ 88.085996] device_release_driver_internal+0x18c/0x21c [ 88.091215] device_release_driver+0x14/0x1c [ 88.095478] unbind_store+0xe0/0x124 [ 88.099048] drv_attr_store+0x20/0x30 [ 88.102704] sysfs_kf_write+0x54/0x64 [ 88.106359] kernfs_fop_write+0xe4/0x1e8 [ 88.110275] __vfs_write+0x40/0x184 [ 88.113757] vfs_write+0xa8/0x19c [ 88.117065] ksys_write+0x58/0xbc [ 88.120374] __arm64_sys_write+0x18/0x20 [ 88.124291] el0_svc_common+0xd0/0x124 [ 88.128034] el0_svc_compat_handler+0x1c/0x24 [ 88.132384] el0_svc_compat+0x8/0x18 The sysfs unexport in pwmchip_remove() is completely asymmetric to what we do in pwmchip_add_with_polarity() and commit 0733424c9ba9 ("pwm: Unexport children before chip removal") is a strong indication that this was wrong to begin with. We should just move pwmchip_sysfs_unexport() where it belongs, which is right after pwmchip_sysfs_unexport_children(). In that case, we do not need separate functions anymore either. We also really want to remove sysfs irrespective of whether or not the chip will be removed as a result of pwmchip_remove(). We can only assume that the driver will be gone after that, so we shouldn't leave any dangling sysfs files around. This warning disappears if we move pwmchip_sysfs_unexport() to the top of pwmchip_remove(), pwmchip_sysfs_unexport_children(). That way it is also outside of the pwm_lock section, which indeed doesn't seem to be needed. Moving the pwmchip_sysfs_export() call outside of that section also seems fine and it'd be perfectly symmetric with pwmchip_remove() again. So, this patch fixes them. Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> [shimoda: revise the commit log and code] Fixes: 76abbdde2d95 ("pwm: Add sysfs interface") Fixes: 0733424c9ba9 ("pwm: Unexport children before chip removal") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-10-12pwm: Send a uevent on the pwmchip device upon channel sysfs (un)exportFabrice Gasnier1-0/+11
This patch sends a uevent (KOBJ_CHANGE) on the pwmchipN device, everytime a pwmX channel has been exported/unexported via sysfs. This allows udev to implement rules on such events, like: SUBSYSTEM=="pwm*", PROGRAM="/bin/sh -c '\ chown -R root:gpio /sys/class/pwm && chmod -R 770 /sys/class/pwm;\ chown -R root:gpio /sys/devices/platform/soc/*.pwm/pwm/pwmchip* && chmod -R 770 /sys/devices/platform/soc/*.pwm/pwm/pwmchip*\ '" This is a replacement patch for commit 7e5d1fd75c3d ("pwm: Set class for exported channels in sysfs"), see [1]. basic testing: $ udevadm monitor --environment & $ echo 0 > /sys/class/pwm/pwmchip0/export KERNEL[197.321736] change /devices/.../pwm/pwmchip0 (pwm) ACTION=change DEVPATH=/devices/.../pwm/pwmchip0 EXPORT=pwm0 SEQNUM=2045 SUBSYSTEM=pwm [1] https://lkml.org/lkml/2018/9/25/713 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Tested-by: Gottfried Haider <gottfried.haider@gmail.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-10-12Revert "pwm: Set class for exported channels in sysfs"Fabrice Gasnier1-1/+0
This reverts commit 7e5d1fd75c3dde9fc10c4472b9368089d1b81d00 ("pwm: Set class for exported channels in sysfs") as it causes regression with multiple pwm chip[1], when exporting a pwm channel (echo X > export): - ABI (Documentation/ABI/testing/sysfs-class-pwm) states pwmX should be created in /sys/class/pwm/pwmchipN/pwmX - Reverted patch causes new entry to be also created directly in /sys/class/pwm/pwmX - 1st time, exporting pwmX will create an entry in /sys/class/pwm/pwmX - class attributes are added under pwmX folder, such as export, unexport npwm, symlinks. This is wrong as it belongs to pwmchipN. It may cause bad behavior and report wrong values. - when another export happens on another pwmchip, it can't be created (e.g. -EEXIST). This is causing the issue with multiple pwmchip. Example on stm32 (stm32429i-eval) platform: $ ls /sys/class/pwm pwmchip0 pwmchip4 $ cd /sys/class/pwm/pwmchip0/ $ echo 0 > export $ ls /sys/class/pwm pwm0 pwmchip0 pwmchip4 $ cd /sys/class/pwm/pwmchip4/ $ echo 0 > export sysfs: cannot create duplicate filename '/class/pwm/pwm0' ...Exception stack follows... This is also seen on other platform [2] [1] https://lkml.org/lkml/2018/9/25/713 [2] https://lkml.org/lkml/2018/9/25/447 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Tested-by: Gottfried Haider <gottfried.haider@gmail.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28pwm: sysfs: Use put_device() instead of kfree()Arvind Yadav1-1/+2
Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-12-05pwm: Set class for exported channels in sysfsGottfried Haider1-0/+1
Notifications for devices without bus or class set get dropped by dev_uevent_filter(). Adding the class to the exported child matches what the GPIO subsystem is doing. With this change exporting a channel triggers a udev event, which gives userspace a chance to fixup permissions and makes it possible for non-root users to make use of the PWM subsystem. Signed-off-by: Gottfried Haider <gottfried.haider@gmail.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: H Hartley Sweeten <hsweeten@visionengravers.com> CC: linux-pwm@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-rpi-kernel@lists.infradead.org Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-11-29pwm: Fix device reference leakJohan Hovold1-0/+2
Make sure to drop the reference to the parent device taken by class_find_device() after "unexporting" any children when deregistering a PWM chip. Fixes: 0733424c9ba9 ("pwm: Unexport children before chip removal") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-09-05pwm: Unexport children before chip removalDavid Hsu1-0/+18
Exported pwm channels aren't removed before the pwmchip and are leaked. This results in invalid sysfs files. This fix removes all exported pwm channels before chip removal. Signed-off-by: David Hsu <davidhsu@google.com> Fixes: 76abbdde2d95 ("pwm: Add sysfs interface") Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-25Merge branch 'for-4.8/capture' into for-nextThierry Reding1-0/+17
2016-06-10pwm: sysfs: Add PWM capture supportLee Jones1-0/+17
Allow a user to read PWM capture results from sysfs. To start a capture and read the result, simply read the file: $ cat $PWMCHIP/capture The output format is "<period> <duty cycle>". Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10pwm: sysfs: Get return value from pwm_apply_state()Ryo Kodama1-1/+1
This patch adds to check the return value from pwm_apply_state() used in enable_store(). The error of enable_store() doesn't work if the return value doesn't received. Signed-off-by: Ryo Kodama <ryo.kodama.vz@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 39100ceea79f ("pwm: Switch to the atomic API") Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Switch to the atomic APIBoris Brezillon1-11/+37
Replace legacy pwm_get/set_xxx() and pwm_config/enable/disable() calls by pwm_get/apply_state(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Get rid of pwm->lockBoris BREZILLON1-4/+20
PWM devices are not protected against concurrent accesses. The lock in struct pwm_device might let PWM users think it is, but it's actually only protecting the enabled state. Removing this lock should be fine as long as all PWM users are aware that accesses to the PWM device have to be serialized, which seems to be the case for all of them except the sysfs interface. Patch the sysfs code by adding a lock to the pwm_export struct and making sure it's taken for all relevant accesses to the exported PWM device. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-10pwm: sysfs: Make use of the DEVICE_ATTR_[RW][WO] macro'sOlliver Schinagl1-36/+36
For the npwm property the PWM sysfs interface already made use of the DEVICE_ATTR_RO macro. This patch expands this to the other sysfs properties so that the code base is concise and makes use of this helpful macro. This has the advantage of slightly reducing the code size, improving readability and no longer using magic values for permissions. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-10pwm: sysfs: Remove unnecessary temporary variableOlliver Schinagl1-2/+1
Use the result of pwm_is_enabled() directly instead of storing it in a temporary variable. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-07-27pwm: sysfs: Remove unnecessary paddingThierry Reding1-3/+3
Padding initializers so that assignment operators align is bound to lead to inconsistencies or churn. Single spaces around the assignment is just fine. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-07-27pwm: sysfs: Properly convert from enum to stringThierry Reding1-2/+12
The current code will check for polarity in a boolean way. While it is correct that polarity is either normal or inversed, make it more obvious that it's an enumeration by using a switch statement and explicit matches on the enumeration values. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-07-20pwm: Make use of pwm_get_xxx() helpers where appropriateBoris Brezillon1-5/+6
Use the pwm_get_xxx() helpers instead of directly accessing the fields in struct pwm_device. This will allow us to smoothly move to the atomic update approach. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-07-20pwm: Add the pwm_is_enabled() helperBoris Brezillon1-1/+1
Some PWM drivers are testing the PWMF_ENABLED flag. Create a helper function to hide the logic behind enabled test. This will allow us to smoothly move from the current approach to an atomic PWM update approach. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-04pwm: sysfs: Convert to use ATTRIBUTE_GROUPS macroAxel Lin1-10/+2
Use new ATTRIBUTE_GROUPS macro to reduce the number of lines of code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-07-29pwm: convert class code to use dev_groupsGreg Kroah-Hartman1-9/+12
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the PWM class code to use the correct field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-21pwm: Add sysfs interfaceH Hartley Sweeten1-0/+352
Add a simple sysfs interface to the generic PWM framework. /sys/class/pwm/ `-- pwmchipN/ for each PWM chip |-- export (w/o) ask the kernel to export a PWM channel |-- npwm (r/o) number of PWM channels in this PWM chip |-- pwmX/ for each exported PWM channel | |-- duty_cycle (r/w) duty cycle (in nanoseconds) | |-- enable (r/w) enable/disable PWM | |-- period (r/w) period (in nanoseconds) | `-- polarity (r/w) polarity of PWM (normal/inversed) `-- unexport (w/o) return a PWM channel to the kernel Based on work by Lars Poeschel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 19:09:26 +0000