summaryrefslogtreecommitdiff
path: root/drivers/phy/rockchip
AgeCommit message (Collapse)AuthorFilesLines
2021-12-23phy: phy-rockchip-inno-usb2: add rk3568 supportPeter Geis1-0/+65
The rk3568 usb2phy is a standalone device with a single muxed interrupt. Add support for the registers to the usb2phy driver. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-7-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support muxed interruptsPeter Geis1-49/+119
The rk3568 usb2phy has a single muxed interrupt that handles all interrupts. Allow the driver to plug in only a single interrupt as necessary. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-6-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support standalone phy nodesPeter Geis1-5/+12
New Rockchip devices have the usb2 phy devices as standalone nodes instead of children of the grf node. Allow the driver to find the grf node from a phandle. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-5-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support #address_cells = 2Peter Geis1-1/+10
New Rockchip devices have the usb phy nodes as standalone devices. These nodes have register nodes with #address_cells = 2, but only use 32 bit addresses. Adjust the driver to check if the returned address is "0", and adjust the index in that case. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-4-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-14phy: rockchip-inno-usb2: remove redundant assignment to variable delayColin Ian King1-1/+0
Variable delay is being assigned to zero and the code falls through to the next case in a switch statement that returns out of the function. The variable is never read in this scenario and so the assignment is redundant and can be removed. Cleans up scan-build static analysis warning: drivers/phy/rockchip/phy-rockchip-inno-usb2.c:753:3: warning: Value stored to 'delay' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211211180054.525368-1-colin.i.king@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01phy: rockchip-inno-usb2: Make use of the helper function ↵Cai Huoqing1-9/+2
devm_add_action_or_reset() The helper function devm_add_action_or_reset() will internally call devm_add_action(), and gif devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922130024.745-1-caihuoqing@baidu.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: rockchip-inno-usb2: fix for_each_child.cocci warningskernel test robot1-1/+3
For_each_available_child_of_node should have of_node_put() before break around line 1184. The other jumps out of the loop do contain the put. Generated by: scripts/coccinelle/iterators/for_each_child.cocci CC: Sumera Priyadarsini <sylphrenadin@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2106231617540.99238@hadrien Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy/rockchip: add Innosilicon-based CSI dphyHeiko Stuebner3-0/+469
The CSI dphy found for example on the rk3326/px30 and rk3368 is based on an IP design from Innosilicon. Add a driver for it. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210610212935.3520341-3-heiko@sntech.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy: rockchip: remove redundant initialization of pointer cfgColin Ian King1-2/+2
The pointer cfg is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210609113901.185230-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-rockchip-inno-usb2: add support for RK3308 USB phyTobias Schramm1-0/+44
The RK3308 SoC uses a slightly different USB phy than other Rockchip parts. This commit adds support for that phy. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Link: https://lore.kernel.org/r/20210514150044.2099298-3-t.schramm@manjaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-06time64.h: Consolidated PSEC_PER_SEC definitionAndy Shevchenko1-4/+4
We have currently three users of the PSEC_PER_SEC each of them defining it individually. Instead, move it to time64.h to be available for everyone. There is a new user coming with the same constant in use. It will also make its life easier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15phy: rockchip-typec: add missing of_node_putJunlin Yang1-0/+1
Fix OF node leaks by calling of_node_put in for_each_available_child_of_node when the cycle returns. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210216084847.1544-1-angkery@163.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: rockchip: emmc, add vendor prefix to dts propertiesChris Ruehl1-2/+2
Update the implementation add "rockchip," vendor prefix for the optional dts properties. Prefix referred from vendor-prefixes.yaml. Follow up with commit 8b5c2b45b8f0a ("phy: rockchip: set pulldown for strobe line in dts") commit a8cef928276bb ("phy: rockchip-emmc: output tap delay dt property") Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Link: https://lore.kernel.org/r/20201215014409.905-3-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: rockchip-emmc: emmc_phy_init() always return 0Chris Ruehl1-3/+5
rockchip_emmc_phy_init() return variable is not set with the error value if clk_get() failed. 'emmcclk' is optional, thus use clk_get_optional() and if the return value != NULL make error processing and set the return code accordingly. Fixes: 52c0624a10cce phy: rockchip-emmc: Set phyctrl_frqsel based on card clock Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201210080454.17379-1-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-05phy: rockchip-emmc: output tap delay dt propertyChris Ruehl1-1/+12
Update the rockchip-emmc phy to set the otapdlysec register with a dt property. This was mentioned from Brian Norris when he sent the path to set the default value in the driver. This patch add a dt property 'output-tapdelay-select' u32 and allow to set the 0x0-0xf. If not set in dts, the old default 0x4 applies. Tested with our customized rk3399 to tune the eMMC. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Link: https://lore.kernel.org/r/20201202082507.3536-2-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-05phy: rockchip: set pulldown for strobe line in dtsChris Ruehl1-0/+16
This patch add support to set the internal pulldown via dt property and allow simplify the board design for the trace from emmc-phy to the eMMC chipset. Default to not set the pull-down. This patch was inspired from the 4.4 tree of the Rockchip SDK, where it is enabled unconditional. The patch had been tested with our rk3399 customized board. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Link: https://lore.kernel.org/r/20201129054416.3980-2-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-02phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build errorTiezhu Yang1-0/+1
devm_ioremap_resource() will be not built in lib/devres.c if CONFIG_HAS_IOMEM is not set, and then there exists a build error about undefined reference to "devm_ioremap_resource" in the file phy-rockchip-inno-hdmi.c under COMPILE_TEST and CONFIG_PHY_ROCKCHIP_INNO_HDMI, make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/1606216287-14648-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16phy: rockchip: convert to devm_platform_ioremap_resourceChunfeng Yun1-3/+1
Use devm_platform_ioremap_resource to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1604642930-29019-13-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-02Merge tag 'phy-for-5.10' of ↵Greg Kroah-Hartman3-0/+402
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next Vinod writes: phy for 5.9 - Core: - New PHY attribute for max_link_rate - New phy drivers: - Rockchip dphy driver moved from staging - Socionext UniPhier AHCI PHY driver - Intel LGM SoC USB phy - Intel Keem Bay eMMC PHY driver - Updates: - Support for imx8mp usb phy - Support for DP Phy and USB3+DP combo phy in QMP driver - Support for Qualcomm sc7180 DP phy - Support for cadence torrent PCIe and USB single linke and multilink configurations along with USB, SGMII/QSGMII configurations * tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) phy: qcom-qmp: initialize the pointer to NULL phy: qcom-qmp: Add support for sc7180 DP phy phy: qcom-qmp: Add support for DP in USB3+DP combo phy phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify phy: qcom-qmp: Get dp_com I/O resource by index phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy' phy: qcom-qmp: Remove 'initialized' in favor of 'init_count' phy: qcom-qmp: Move phy mode into struct qmp_phy dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information dt-bindings: phy: ti,phy-j721e-wiz: fix bindings for torrent phy dt-bindings: phy: cdns,torrent-phy: add reset-names phy: rockchip-dphy-rx0: Include linux/delay.h phy: fix USB_LGM_PHY warning & build errors phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configuration phy: cadence-torrent: Add PCIe + USB multilink configuration phy: cadence-torrent: Add single link USB register sequences phy: cadence-torrent: Add single link SGMII/QSGMII register sequences phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals phy: cadence-torrent: Add PHY link configuration sequences for single link phy: cadence-torrent: Add clk changes for multilink configuration ...
2020-09-22phy: rockchip-dphy-rx0: Include linux/delay.hTomasz Figa1-0/+1
Fix an implicit declaration of usleep_range(): drivers/phy/rockchip/phy-rockchip-dphy-rx0.c: In function 'rk_dphy_enable': drivers/phy/rockchip/phy-rockchip-dphy-rx0.c:203:2: error: implicit declaration of function 'usleep_range' [-Werror=implicit-function-declaration] Fixes: 32abcc4491c62 ("media: staging: phy-rockchip-dphy-rx0: add Rockchip MIPI Synopsys DPHY RX0 driver") Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200921225618.52529-1-tfiga@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-31phy: Move phy-rockchip-dphy-rx0 out of stagingEzequiel Garcia3-0/+401
There is no need for this driver to be in staging. Let's promote it! Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20200825220710.634106-1-ezequiel@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-4/+4
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-17Merge branch 'fixes' into nextVinod Koul1-2/+2
2020-07-13phy: rockchip-typec: use correct format for structure descriptionVinod Koul1-1/+1
We get warning with W=1 build: drivers/phy/rockchip/phy-rockchip-typec.c:360: warning: cannot understand function prototype: 'struct rockchip_usb3phy_port_cfg ' The 'struct rockchip_usb3phy_port_cfg ' is commented properly but uses wrong format, so fix that up Link: https://lore.kernel.org/r/20200708132809.265967-4-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-24phy: rockchip: Fix return value of inno_dsidphy_probe()Tiezhu Yang1-2/+2
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: b7535a3bc0ba ("phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHY") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/1590412138-13903-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-20phy: rk-inno-usb2: Decrease verbosity of repeating log.Christoph Muellner1-1/+1
phy-rockchip-inno-usb2 logs the message "phy-ff2c0000.syscon:usb2-phy@100.2: charger = INVALID_CHARGER" constantly with a frequency of about 1 Hz and a verbosity level of INFO. As this is clearly annoying, this patch decreases the log level to DEBUG. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-17Merge tag 'phy-for-5.6_v2' of ↵Greg Kroah-Hartman2-220/+100
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 5.6 *) Add support in PHY core to create link between PHY consumer and PHY provider *) Add DisplayPort PHY configuration set to be used for negotiating the configurations to be used between DisplayPort controller and DisplayPort PHY *) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for J721E SoC (Supports USB and PCIe) *) Add PHY driver for eMMC PHY in Intel LGM SoC *) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new Synopsys USB Controller *) Add support for 16nm SATA PHY present in Broadcom 7216 SoC *) Fix lost packet issue, fix MDIO from getting inaccessible, fix occasional transaction failures, fix USB driver from crashing in Broadcom USB PHY driver *) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150 *) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from display controller to rockchip-inno-dsidphy *) Other cleanups including compile testing for some of the PHY drivers, fixing Kconfig indentation, duplicate writes in drivers etc., Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits) dt-bindings: phy: Add PHY_TYPE_DP definition phy: ti: j721e-wiz: Fix return value check in wiz_probe() dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE phy: ti: j721e-wiz: Manage typec-gpio-dir dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO phy: cadence: Sierra: add phy_reset hook phy: cadence: Sierra: remove redundant initialization of pointer regmap phy: Add DisplayPort configuration options phy: Enable compile testing for some of drivers phy: mediatek: Fix Kconfig indentation phy: intel-lgm-emmc: Add support for eMMC PHY dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC dt-bindings: phy: Document WIZ (SERDES wrapper) bindings phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove() phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz phy: cadence: Sierra: Change MAX_LANES of Sierra to 16 phy: cadence: Sierra: Check for PLL lock during PHY power on phy: cadence: Sierra: Get reset control "array" for each link ...
2020-01-08phy/rockchip: inno-dsidphy: generalize parameter handlingHeiko Stuebner2-220/+100
During review it came to light that exposing the pll clock outside is not the right approach and struct phy_configure_opts_mipi_dphy exists just for that reason to transfer parameters to the phy. So drop the exposed clock and rely on the phy configure options to bring in the correct rate. That way we can also just drop the open coded timing struct and default values function. Fixes: b7535a3bc0ba ("phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHY") Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-31phy/rockchip: inno-hdmi: round clock rate down to closest 1000 HzJonas Karlman1-0/+4
Commit 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework") changed what rate clk_round_rate() is called with, an additional 999 Hz added to the requsted mode clock. This has caused a regression on RK3328 and presumably also on RK3228 because the inno-hdmi-phy clock requires an exact match of the requested rate in the pre pll config table. When an exact match is not found the parent clock rate (24MHz) is returned to the clk_round_rate() caller. This cause wrong pixel clock to be used and result in no-signal when configuring a mode on RK3328. Fix this by rounding the rate down to closest 1000 Hz in round_rate func, this allows an exact match to be found in pre pll config table. Fixes: 287422a95fe2 ("drm/rockchip: Round up _before_ giving to the clock framework") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-31phy: phy-rockchip-inno-usb2: add phy description for px30Heiko Stuebner1-0/+1
The px30 soc from Rockchip shares the same register description as the rk3328, so can re-use its definitions. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-31phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHYWyon Bi3-0/+814
The Innosilicon Video Combo PHY not only supports MIPI DSI, but also LVDS and TTL functions with small die size and low pin count. Customers can choose according to their own applications. Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com> [removed TTL mode for now, as it required a hook back into the dsi host] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-08-27phy-rockchip-inno-hdmi: Fix RK3328_TERM_RESISTOR_CALIB_SPEED_7_0's third valueNathan Chancellor1-1/+1
After commit "linux/bits.h: Add compile time sanity check of GENMASK inputs" [1], arm64 defconfig builds started failing: In file included from ../include/linux/bits.h:22, from ../include/linux/bitops.h:5, from ../include/linux/kernel.h:12, from ../include/linux/clk.h:13, from ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:9: ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c: In function 'inno_hdmi_phy_rk3328_power_on': ../include/linux/build_bug.h:16:45: error: negative width in bit-field '<anonymous>' 16 | #define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:(-!!(e)); })) | ^ ../include/linux/bits.h:24:18: note: in expansion of macro 'BUILD_BUG_ON_ZERO' 24 | ((unsigned long)BUILD_BUG_ON_ZERO(__builtin_choose_expr( \ | ^~~~~~~~~~~~~~~~~ ../include/linux/bits.h:39:3: note: in expansion of macro 'GENMASK_INPUT_CHECK' 39 | (GENMASK_INPUT_CHECK(high, low) + __GENMASK(high, low)) | ^~~~~~~~~~~~~~~~~~~ ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:24:42: note: in expansion of macro 'GENMASK' 24 | #define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l))) | ^~~~~~~ ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:201:50: note: in expansion of macro 'UPDATE' 201 | #define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 9) | ^~~~~~ ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:1046:26: note: in expansion of macro 'RK3328_TERM_RESISTOR_CALIB_SPEED_7_0' 1046 | inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ As pointed out by Robin and Guenter, inno_write's val argument is an 8-bit value so having a mask larger than that doesn't make sense. This also matches the rest of the *_7_0 macros in this driver. [1]: https://lore.kernel.org/lkml/20190801230358.4193-2-rikard.falkeborn@gmail.com/ Reported-by: Andrzej Hajda <a.hajda@samsung.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: kernelci.org bot <bot@kernelci.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Suggested-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235Thomas Gleixner3-27/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 53 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 24 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.162703968@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08Merge tag 'usb-5.2-rc1' of ↵Linus Torvalds1-2/+28
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ...
2019-04-17phy: rockchip-emmc: Allow to set drive impedance via DTS.Christoph Muellner1-2/+28
The rockchip-emmc PHY can be configured with different drive impedance values. Currenlty a value of 50 Ohm is hard coded into the driver. This patch introduces the DTS property 'drive-impedance-ohm' for the rockchip-emmc phy node, which uses the value from the DTS to setup the drive impedance accordingly. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg staticYueHaibing1-2/+2
Fix sparse warning: drivers/phy/rockchip/phy-rockchip-typec.c:403:16: warning: symbol 'usb3_pll_cfg' was not declared. Should it be static? drivers/phy/rockchip/phy-rockchip-typec.c:420:16: warning: symbol 'dp_pll_cfg' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: phy-rockchip-inno-usb2: drop reading the utmi-avalid propertyEnric Balletbo i Serra1-13/+2
That property is no used in mainline and is not documented. The only board using that property is the rk33-99-evb-rev1 and -rev2 in the vendor kernel. The existence of a further -rev3 (which also looks way better cared for compared rev1+2) indicates that the older ones are probably some sort of preproduction models, where some wiring (on the soc or board) may have gone wrong. It is also not clear why this is a hardware-description or a DT property, so, as noboby seems to care of this just drop reading that property. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: rockchip-inno-usb2: fix misspelling and kernel-doc documentationEnric Balletbo i Serra1-16/+19
Fix the typo flase -> false and clean up the kernel-doc documentation in phy-rockchip-inno.usb2.c and fix the following warnings when documentation is built. :58: warning: missing initial short description :69: warning: cannot understand function prototype: 'enum usb_chg_state ' :97: warning: missing initial short description :136: warning: cannot understand function prototype: 'struct rockchip_usb2phy_port_cfg ' :157: warning: cannot understand function prototype: 'struct rockchip_usb2phy_cfg ' :163: warning: Function parameter or member 'port_cfgs' not described in 'rockchip_usb2phy_cfg' :187: warning: cannot understand function prototype: 'struct rockchip_usb2phy_port ' :204: warning: Function parameter or member 'port_cfg' not described in 'rockchip_usb2phy_port' :207: warning: missing initial short description :234: warning: Function parameter or member 'dev' not described in 'rockchip_usb2phy' :234: warning: Function parameter or member 'clk480m_hw' not described in 'rockchip_usb2phy' Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: Use of_node_name_eq for node name comparisonsRob Herring2-5/+5
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: rockchip-usb: add usb-uart setup for rk3188Heiko Stuebner1-46/+95
The rk3188 also supports bringing the uart2 out through the usb dm+dp pins, so add the necessary setup for it. rk3066 does not seem to support usb-uart functionality and this particular phy was only used on older Rockchip socs, so this leaves room for a bit of cleanup as well, as there most likely won't be new additions in the driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: Convert to using %pOFn instead of device_node.nameRob Herring4-12/+12
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-10phy: add Rockchip Innosilicon hdmi phyZheng Yang3-0/+1286
Add a driver for the Innosilicon hdmi phy used on rk3228/rk3229 and rk3328 socs from Rockchip. Signed-off-by: Zheng Yang <zhengyang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16phy: rockchip-typec: fall back to working in host-mode if extcon is missing.Enric Balletbo i Serra1-3/+10
Right now the rockchip type-c phy does fail probing when no extcon is detected. Some boards get the cable-state via the extcon interface and have this supported, other boards seem to use the fusb302 chip or another but the driver currently does not seem to utilize the extcon interface to report the cable-state. And, other, just connect the type-c to a standard USB-A port so use no controller at all. A missing extcon shouldn't fail to probe, instead, should just fall back to working in host-mode if it cannot get the extcon. Fixes: c301b327aea898af ("arm64: dts: rockchip: add usb3-phy otg-port support for rk3399") Reported-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16phy: rockchip-typec: support DP phy switchChris Zhong1-1/+8
There are 2 Type-c PHYs in RK3399, but only one DP controller. Hence only one PHY can connect to DP controller at one time, the other should be disconnected. The GRF_SOC_CON26 register has a switch bit to do it, set this bit means enable PHY 1, clear this bit means enable PHY 0. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16phy: rockchip-typec: force to USB2 if DP at 4 lanes modeChris Zhong1-3/+18
The usb3tousb2_en BIT will be clear to 0 in probe(), it make USB controller work at USB3 mode, and if the USB phy is turned on with DP only mode(4 lanes DP), the rockchip_usb3_phy_power_on() will return directly, so usb3_host_disable and usb3_host_port these 2 BIT will keep a same value as coreboot. In coreboot, these 3 BITs are set as USB2 mode, but now one of the bits is changed to USB3, it make USB controller work at a unknown status. These 3 BITs should be changed to USB2, if the Type-C works at 4 lanes mode, and then switch it back to USB3 mode, when USB disconnect. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 17:56:59 +0000