summaryrefslogtreecommitdiff
path: root/drivers/nvme
AgeCommit message (Collapse)AuthorFilesLines
2017-09-11nvme-pci: implement the HMB entry number and size limitationsChristoph Hellwig3-1/+10
Adds support for the new Host Memory Buffer Minimum Descriptor Entry Size and Host Memory Maximum Descriptors Entries field that were added in TP 4002 HMB Enhancements. These allow the controller to advertise limits for the usual number of segments in the host memory buffer, as well as a minimum usable per-segment size. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-09-11nvme-pci: propagate (some) errors from host memory buffer setupChristoph Hellwig1-6/+12
We want to catch command execution errors when resetting the device, so propagate errors from the Set Features when setting up the host memory buffer. We keep ignoring memory allocation failures, as the spec clearly says that the controller must work without a host memory buffer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org
2017-09-11nvme-pci: use appropriate initial chunk size for HMB allocationAkinobu Mita1-1/+1
The initial chunk size for host memory buffer allocation is currently PAGE_SIZE << MAX_ORDER. MAX_ORDER order allocation is usually failed without CONFIG_DMA_CMA. So the HMB allocation is retried with chunk size PAGE_SIZE << (MAX_ORDER - 1) in general, but there is no problem if the retry allocation works correctly. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> [hch: rebased] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org
2017-09-11nvme-pci: fix host memory buffer allocation fallbackChristoph Hellwig1-18/+30
nvme_alloc_host_mem currently contains two loops that are interwinded, and the outer retry loop turns out to be broken. Fix this by untangling the two. Based on a report an initial patch from Akinobu Mita. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org
2017-09-11nvme: fix lightnvm checkChristoph Hellwig4-35/+14
nvme_nvm_ns_supported assumes every device is a pci_dev, which leads to reading an incorrect field, or possible even a dereference of unallocated memory for fabrics controllers. Fix this by introducing a quirk for lighnvm capable devices instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-09-09Merge branch 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-blockLinus Torvalds14-506/+695
Pull followup block layer updates from Jens Axboe: "I ended up splitting the main pull request for this series into two, mainly because of clashes between NVMe fixes that went into 4.13 after the for-4.14 branches were split off. This pull request is mostly NVMe, but not exclusively. In detail, it contains: - Two pull request for NVMe changes from Christoph. Nothing new on the feature front, basically just fixes all over the map for the core bits, transport, rdma, etc. - Series from Bart, cleaning up various bits in the BFQ scheduler. - Series of bcache fixes, which has been lingering for a release or two. Coly sent this in, but patches from various people in this area. - Set of patches for BFQ from Paolo himself, updating both documentation and fixing some corner cases in performance. - Series from Omar, attempting to now get the 4k loop support correct. Our confidence level is higher this time. - Series from Shaohua for loop as well, improving O_DIRECT performance and fixing a use-after-free" * 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block: (74 commits) bcache: initialize dirty stripes in flash_dev_run() loop: set physical block size to logical block size bcache: fix bch_hprint crash and improve output bcache: Update continue_at() documentation bcache: silence static checker warning bcache: fix for gc and write-back race bcache: increase the number of open buckets bcache: Correct return value for sysfs attach errors bcache: correct cache_dirty_target in __update_writeback_rate() bcache: gc does not work when triggering by manual command bcache: Don't reinvent the wheel but use existing llist API bcache: do not subtract sectors_to_gc for bypassed IO bcache: fix sequential large write IO bypass bcache: Fix leak of bdev reference block/loop: remove unused field block/loop: fix use after free bfq: Use icq_to_bic() consistently bfq: Suppress compiler warnings about comparisons bfq: Check kstrtoul() return value bfq: Declare local functions static ...
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds5-33/+14
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-09-03Merge tag 'for-linus-ioctl' of ↵Linus Torvalds2-17/+22
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is a big pull request. Of note is that I'm sending you the new ioctl API for the rdma subsystem. We put it up on linux-api@, but didn't get much response. The API is complex, but it solves two different problems in one go: 1) The bi-directional nature of the RDMA file write calls, which created the security hole we had to handle (and for which the fix is now causing problems for systems in production, we were a bit over zealous in the fix and the ability to open a device, then fork, then create new queue pairs on the device and use them is broken). 2) The bloat caused by different vendors implementing extensions to the base verbs API. Each vendor's hardware is slightly different, and the hardware might be suitable for one extension but not another. By the time we add generic extensions for all the different ways that the different hardware can offload things, the API becomes bloated. Things like our completion structs have started to exceed a cache line in size because of all the elements needed to support this. That in turn shows up heavily in the performance graphs with a noticable drop in performance on 100Gigabit links as our completion structs go from occupying one cache line to 1+. This API makes things like the completion structs modular in a very similar way to netlink so that your structs can only include the items needed for the offloads/features you are actually using on a given queue pair. In that way we support everything, but only use what we need, and our structs stay smaller. The ioctl API is better explained by the posting on linux-api@ than I can explain it here, so I'll just leave it at that. The rest of the pull request is typical stuff. Updates for 4.14 kernel merge window - Lots of hfi1 driver updates (mixed with a few qib and core updates as well) - rxe updates - various mlx updates - Set default roce type to RoCEv2 - Several larger fixes for bnxt_re that were too big for -rc - Several larger fixes for qedr that, likewise, were too big for -rc - Misc core changes - Make the hns_roce driver compilable on arches other than aarch64 so we can more easily debug build issues related to it - Add rdma-netlink infrastructure updates - Add automatic IRQ affinity infrastructure - Add 32bit lid support - Lots of misc fixes across the subsystem from random people - Autoloading of RDMA netlink modules - PCI pool cleanups from Romain Perier - mlx5 driver feature additions and fixes - Hardware tag matchine feature - Fix sleeping in atomic when resolving roce ah - Add experimental ioctl interface as posted to linux-api@" * tag 'for-linus-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (328 commits) IB/core: Expose ioctl interface through experimental Kconfig IB/core: Assign root to all drivers IB/core: Add completion queue (cq) object actions IB/core: Add legacy driver's user-data IB/core: Export ioctl enum types to user-space IB/core: Explicitly destroy an object while keeping uobject IB/core: Add macros for declaring methods and attributes IB/core: Add uverbs merge trees functionality IB/core: Add DEVICE object and root tree structure IB/core: Declare an object instead of declaring only type attributes IB/core: Add new ioctl interface RDMA/vmw_pvrdma: Fix a signedness RDMA/vmw_pvrdma: Report network header type in WC IB/core: Add might_sleep() annotation to ib_init_ah_from_wc() IB/cm: Fix sleeping in atomic when RoCE is used IB/core: Add support to finalize objects in one transaction IB/core: Add a generic way to execute an operation on a uobject Documentation: Hardware tag matching IB/mlx5: Support IB_SRQT_TM net/mlx5: Add XRQ support ...
2017-09-01nvme-fabrics: generate spec-compliant UUID NQNsDaniel Verkamp1-1/+1
The default host NQN, which is generated based on the host's UUID, does not follow the UUID-based NQN format laid out in the NVMe 1.3 specification. Remove the "NVMf:" portion of the NQN to match the spec. Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-30nvmet: add support for reporting the host identifierOmri Mann3-2/+17
And fix the Get/Set Log Page implementation to take all 8 bits of the feature identifier into account. Signed-off-by: Omri Mann <omri@excelero.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> [hch: used the UUID API, updated changelog]
2017-08-30nvme: Use metadata for passthrough commandsKeith Busch1-11/+4
The ioctls' struct allows the user to provide a metadata address and length for a passthrough command. This patch uses these values that were previously ignored and deletes the now unused wrapper function. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-30nvme: Make nvme user functions staticKeith Busch2-12/+5
These functions are used only locally in the nvme core. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-30nvme/pci: Use req_op to determine DIF remappingKeith Busch1-2/+2
Only read and write commands need DIF remapping. Everything else uses a passthrough integrity payload. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-30nvme: factor metadata handling out of __nvme_submit_user_cmdChristoph Hellwig1-36/+40
Keep the metadata code in a separate helper instead of making the main function more complicated. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-30nvme-fabrics: Convert nvmf_transports_mutex to an rwsemRoland Dreier1-10/+10
The mutex protects against the list of transports changing while a controller is being created, but using a plain old mutex means that it also serializes controller creation. This unnecessarily slows down creating multiple controllers - for example for the RDMA transport, creating a controller involves establishing one connection for every IO queue, which involves even more network/software round trips, so the delay can become significant. The simplest way to fix this is to change the mutex to an rwsem and only hold it for writing when the list is being mutated. Since we can take the rwsem for reading while creating a controller, we can create multiple controllers in parallel. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-30nvme-pci: use dma memory for the host memory buffer descriptorsChristoph Hellwig1-11/+11
The NVMe 1.3 specification says in section 5.21.1.13: "After a successful completion of a Set Features enabling the host memory buffer, the host shall not write to the associated host memory region, buffer size, or descriptor list until the host memory buffer has been disabled." While this doesn't state that the descriptor list must remain accessible to the device it certainly implies it must remaing readable by the device. So switch to a dma coherent allocation for the descriptor list just to be safe - it's not like the cost for it matters compared to the actual memory buffers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")
2017-08-30nvme-rdma: default MR page size to 4kMax Gurtovoy1-2/+6
Due to various page sizes in the system (IOMMU/device/kernel), we set the fabrics controller page size to 4k and block layer boundaries accordinglly. In architectures that uses different kernel page size we'll have a mismatch to the MR page size that may cause a mapping error. Update the MR page size to correspond to the core ctrl settings. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-29nvme: don't blindly overwrite identifiers on disk revalidateChristoph Hellwig1-1/+11
Instead validate that these identifiers do not change, as that is prohibited by the specification. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-08-29nvme: remove nvme_revalidate_nsChristoph Hellwig1-47/+53
The function is used in two places, and the shared code for those will diverge later in this series. Instead factor out a new helper to get the ids for a namespace, simplify the calling conventions for nvme_identify_ns and just open code the sequence. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-08-29nvme: remove unused struct nvme_ns fieldsChristoph Hellwig1-5/+1
And move the flags for the flags field near that field while touching this area. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-08-29nvme: allow calling nvme_change_ctrl_state from irq contextChristoph Hellwig1-2/+3
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-08-29nvme: report more detailed status codes to the block layerChristoph Hellwig1-0/+9
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-08-28nvme: honor RTD3 Entry Latency for shutdownsMartin K. Petersen2-1/+16
If an NVMe controller reports RTD3 Entry Latency larger than shutdown_timeout, up to a maximum of 60 seconds, use that value to set the shutdown timer. Otherwise fall back to the module parameter which defaults to 5 seconds. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> [hch: removed do_div, made transition time local scope] Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme: fix uninitialized prp2 value on small transfersJan H. Schönherr1-1/+3
The value of iod->first_dma ends up as prp2 in NVMe commands. In case there is not enough data to cross a page boundary, iod->first_dma is never initialized and contains random data. Comply with the NVMe specification and fill in 0 in that case. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: Use unlikely macro in the fast pathMax Gurtovoy1-6/+6
This patch slightly improves performance (mainly for small block sizes). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvmet: use memcpy_and_pad for identify sn/frMartin Wilck1-11/+3
This changes the earlier patch "nvmet: don't report 0-bytes in serial number" to use the memcpy_and_pad() helper introduced in a previous patch. Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvmet-fc: simplify sg list handlingJames Smart1-38/+10
The existing nvmet_fc sg list handling has 2 faults: a) the request between LLDD and transport has too large of an sg list (256 elements), which is normally 256k (64 elements). b) sglist handling doesn't optimize on the fact that each element is a page. This patch removes the static sg list in the request and uses the dynamic list already present in the nvmet_fc transport. It also simplies the handling of the sg list on multiple sequences to take advantage of the per-page divisions. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-fc: Reattach to localports on re-registrationJames Smart1-38/+106
If the LLDD resets or detaches from an fc port, the LLDD will deregister all remoteports seen by the fc port and deregister the localport associated with the fc port. The teardown of the localport structure will be held off due to reference counting until all the remoteports are removed (and they are held off until all controllers/associations to terminated). Currently, if the fc port is reinit/reattached and registered again as a localport it is treated as an independent entity from the prior localport and all prior remoteports and controllers cannot be revived. They are created as new and separate entities. This patch changes the localport registration to look at the known localports that are waiting to be torndown. If they are the same port based on wwn's, the local port is transitioned out of the teardown state. This allows the remote ports and controller connections to be reestablished and resumed as long as the localport can also be reregistered within the timeout windows. The patch adds a new routine nvme_fc_attach_to_unreg_lport() with the functionality and moves the lport get/put routines to avoid forward references. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme: rename AMS symbolic constants to fit specificationMax Gurtovoy1-1/+1
Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme: add symbolic constants for CC identifiersMax Gurtovoy1-7/+7
Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme: fix identify namespace loggingSagi Grimberg1-1/+1
Use ctrl->device and lose the func name. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-fabrics: log a warning if hostid is invalidGuan Junxiong1-0/+1
This helps users to quickly spot the reason of why connection fails if the hostid is not compliant with the uuid format. Signed-off-by: Guan Junxiong <guanjunxiong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: call ops->reg_read64 instead of nvmf_reg_read64Sagi Grimberg1-1/+1
To make the nvme_rdma_configure_admin_queue generic in preparation of moving it to common code. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: cleanup error path in controller resetSagi Grimberg1-23/+9
No need to queue an extra work to indirect controller removal, just call the ctrl remove routine. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: introduce nvme_rdma_start_queueSagi Grimberg1-12/+24
This should pair with nvme_rdma_stop_queue. While this is not a complete inverse, it still pairs up pretty well because in fabrics we don't have a disconnect capsule (yet) but we simply teardown the transport association. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: rename nvme_rdma_init_queue to nvme_rdma_alloc_queueSagi Grimberg1-10/+7
Give it a name symmetric to nvme_rdma_free_queue. Also pass in the ctrl sqsize+1 and not the opts queue_size. And suppress a superflous failure message. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: stop queues instead of simply flipping their stateSagi Grimberg1-5/+4
If we move the queues from LIVE state, we might as well stop them (drain for rdma). Do it after we stop the request queues to prevent a stray request sneaking in .queue_rq after we stop the queue. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: introduce configure/destroy io queuesSagi Grimberg1-81/+81
Make a symmetrical handling with admin queue. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: reuse configure/destroy_admin_queueSagi Grimberg1-18/+2
No need to open-code it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: don't free tagset on resetsSagi Grimberg1-19/+30
We're not supposed to do that. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: disable the controller on resetsSagi Grimberg1-4/+6
Mimic the pci driver as a controller disable might be more lightweight than a shutdown. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: move tagset allocation to a dedicated routineSagi Grimberg1-56/+75
We always pair tagset allocation with rdma device reference and it shares some code, centralize it with an argument if its an admin or IO tagset. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme: Add admin_tagset pointer to nvme_ctrlSagi Grimberg5-0/+5
Will be used when we centralize control flows. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: move nvme_rdma_configure_admin_queue code locationSagi Grimberg1-91/+94
We will call it from other places so avoid having to forward declare it. Also move it next to nvme_rdma_destroy_admin_queue. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme-rdma: remove NVME_RDMA_MAX_SEGMENT_SIZEJohannes Thumshirn1-2/+0
NVME_RDMA_MAX_SEGMENT_SIZE is not used anywhere, zap it. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvmet-fcloop: remove ALL_OPTS defineJohannes Thumshirn1-3/+0
ALL_OPTS isn't used anywhere, remove it. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvmet: fix the return error code of target if host is not allowedGuan Junxiong1-0/+1
nvmf target shall return NVME_SC_CONNECT_INVALID_HOST instead of the gereal code INVALID_PARAM when the given host nqn is not allowed to connect. Refer to the 2.2.1 section of the NVMe over Fabrics Spec. Signed-off-by: Guan Junxiong <guanjunxiong@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvmet: use NVME_NSID_ALLChristoph Hellwig2-2/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
2017-08-28nvme: add support for NVMe 1.3 Timestamp FeatureJon Derrick1-0/+21
NVME's Timestamp feature allows controllers to be aware of the epoch time in milliseconds. This patch adds the set features hook for various transports through the identify path, so that resets and resumes can update the controller as necessary. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> [hch: rebased on top of nvme-4.13 error handling changes, changed nvme_configure_timestamp to return the status] Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-28nvme: define NVME_NSID_ALLArnav Dawn1-3/+3
Define the constant "0xffffffff" (used as nsid for all namespaces) as NVME_NSID_ALL. Signed-off-by: Arnav Dawn <a.dawn@samsung.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>