summaryrefslogtreecommitdiff
path: root/drivers/nfc
AgeCommit message (Collapse)AuthorFilesLines
2014-01-09NFC: nfcmrvl: Fix possible memory leak issueAmitkumar Karwar1-2/+7
This patch fixes memory leaks in the error paths of nfcmrvl_nci_register_dev() routine. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: nfcmrvl: Add setup handlerAmitkumar Karwar2-0/+21
Marvell nfc device provides support for external coexistance control. It allows Device Host to inhibit the NFCC from polling when required by asserting a GPIO pin. A second pin allows the DH to have feedback on the current NFCC state. The required configuration for this feature is done in setup handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: nfcmrvl: Initial commit for Marvell NFC driverAmitkumar Karwar7-0/+680
This patch adds NFC support for Marvell 8897 NFC-over-USB chipset. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-05NFC: port100: Fix device leakAlexey Khoroshilov1-0/+1
port100_probe() calls usb_get_dev(), but there is no usb_put_dev() in port100_disconnect(). The patch adds one. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-04NFC: pn533: Frame is invalid if ccid.datalen is 0Samuel Ortiz1-0/+3
Some ACR122 firmwares seem to send 0 length data frames. Before using that length as a data index, we check that it's not 0. If it is we report the frame as being invalid. Reported-by: Arthur Taylor <arthur@advancedtelematic.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-04NFC: pn544: Refactor hw_config valuesArman Uguray1-24/+24
Some of the EEPROM configurations that are assigned by the PN544 driver are set by the firmware and should not be modified by the driver. Others are certain user mode configurations that are currently getting set to values that shouldn't necessarily be dictated by the driver. This patch changes most user and system mode configurations to the firmware defaults. Signed-off-by: Arman Uguray <armansito@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-04NFC: mei_phy: Using kfree_skb() instead of kfree()Salil Kapur1-1/+1
Using kfree_skb() instead of kfree() for struct sk_buff Signed-off-by: Salil Kapur <salilkapur93@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-12-11nfc: Fix FSF address in file headersJeff Kirsher11-32/+11
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Lauro Ramos Venancio <lauro.venancio@openbossa.org> CC: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-07NFC: port100: Add target mode supportThierry Escande1-4/+317
This implements the target NFC digital operations tg_configure_hw(), tg_listen(), tg_listen_mdaa(), and tg_send_cmd(). The target mode supports NFC-A technology at 106kbits/s and NFC-F technologies at 212 and 424kbits/s. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-07NFC: port100: Add initiator mode supportThierry Escande1-3/+363
This patch implements the initiator NFC operations in_configure_hw() and in_send_cmd(). It also implements the switch_rf() operation. The initiator mode supports NFC-A technology at 106kbits/s and NFC-F technologies at 212 and 424kbits/s. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-07NFC: port100: Commands mechanism implementationThierry Escande1-1/+670
This patch implements the command handling mechanism. The digital stack serializes all commands sent to the driver. This means that the digital stack waits for the reply of the current command before sending a new one. So there is no command queue managed at driver level. All Port-100 commands are asynchronous. If the command has been sent successfully to the device, it replies with an ACK frame. Then the command response is received (or actually no-response in case of timeout or error) and a command complete work on the system workqueue is responsible for sending the response (or the error) back to the digital stack. The digital stack requires some commands to be synchronous, mainly hardware configuration ones. These commands use the asynchronous command path but are made synchronous by using a completion object. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-07NFC: Sony Port-100 Series driverThierry Escande3-0/+198
This adds support for the Sony NFC USB dongle RC-S380, based on the Port-100 chip. This dongle is an analog frontend and does not implement the digital layer. This driver uses the nfc_digital module which is an implementation of the NFC Digital Protocol stack. This patch is a skeleton. It only registers the dongle against the NFC digital protocol stack. All NFC digital operation functions are stubbed out. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Target mode Tx fragmentation supportOlivier Guiter1-7/+70
In target mode, when we want to send frames larger than the max length (PN533_CMD_DATAEXCH_DATA_MAXLEN), we have to split the frame in smaller chunks and send them, using a specific working queue, with the TgSetMetaData command. TgSetMetaData sets his own MI bit in the PFB. The last chunk is sent using the TgSetData command. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Add support for incoming fragmented frame in target modeOlivier Guiter1-8/+64
This code processes, for Target Mode, incoming fragmented frames. If the MI bit is present, we start a working queue to grab and aggregate all the parts (using TmGetData between each parts). On the last one, as there's no more MI bit, we jump on the usual behavior. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Add MI/TG bits only when in Initiator modeOlivier Guiter1-8/+11
The fragmentation routine (used to split big frames) could be used in target or initiator mode (TgSetMetaData vs InDataExchange), but the MI/TG bytes are not needed in target mode (TgSetMetaData), so we add a check on the mode Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Staticize local symbolsSachin Kamat1-2/+2
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: nfcwilink: Remove redundant dev_set_drvdataSachin Kamat1-2/+0
Driver core sets driver data to NULL upon failure or remove. Cc: Ilan Elias <ilane@ti.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Start listen timer from start_pollSamuel Ortiz1-1/+11
If we start the polling loop from a listening cycle, we need to start the corresponding timer as well. This bug showed up after commit dfccd0f5 as it was impossible to start from a listening cycle before it. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Send ATR_REQ directly for active device detectionSamuel Ortiz1-1/+120
In order to improve active devices detection, we send an ATR_REQ between each passive detection cycle. Without this algorithm, Android 4.3 based devices running the Broadcom stack are hardly detected. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: Standardize logging styleJoe Perches8-61/+50
Use standardized styles to minimize coding defects. Always use nfc_<level> where feasible. Add \n to formats where appropriate. Typo "it it" correction. Add #define pr_fmt where appropriate. Remove function tracing logging messages. Remove OOM messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: Convert nfc_dev_info and nfc_dev_err to nfc_<level>Joe Perches3-120/+113
Use a more standard kernel style macro logging name. Standardize the spacing of the "NFC: " prefix. Add \n to uses, remove from macro. Fix the defective uses that already had a \n. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: Replace nfc_dev_dbg with dev_dbgJoe Perches3-121/+91
Use the generic kernel function instead of a home-grown one that does the same thing. Add \n to uses not at the macro. Don't add \n where the nfc_dev_dbg macro mistakenly had them already. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn544: Add SE enable/disable operationArron Wang1-7/+79
To enable the UICC secure element, we first enable the UICC gate list in order for the SE to be able to use all RF technologies. For the embedded SE, we just turn the eSE default mode to ON. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn544: Add SE discover operationArron Wang1-0/+30
For the SWP secure element, we send the proprietary SELF_TEST_SWP command and check the response. For the WI secure element, we simply try to switch to the default embedded SE mode. If that works, it means we have an embedded SE. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn544: i2c: Add firmware download implementation for pn544Eric Lapuyade1-12/+334
The pn544 can enter a firmware update mode where firmware blobs can be pushed through the i2c line and flashed on the target. A special command allows to verify that blobs are correctly flashed and this is what we do for every downloaded firmware blob. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn544: Add firmware operations hci opsEric Lapuyade4-4/+21
The firmware operation callback is passed by the physical layer to the hci driver during probe. All the driver does is to store it and call it when the fw_upload hci ops is invoked. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn544: i2c: Add firmware download mode power-on supportEric Lapuyade3-6/+14
This is in preparation for pn544-i2c firmware download feature, where we need to know if we're in regular or firmware upload mode. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Add some polling entropySamuel Ortiz1-1/+6
By not always starting the polling loop from the same modulation, we avoid entering infinite loops where devices exporting 2 targets (on 2 different modulations) get the same target activated over and over. If this target is not readable (e.g. a wallet emulating a tag), we will stay in an error loop for ever. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Add delay between each poll frameSamuel Ortiz1-5/+11
It seems that some pn533 firmwares go belly up when being asked to send poll frames too frequently. Adding a 10ms delay between each of them calm the chip down and prevent it from crashing. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Store the correct frame size (normal vs ext)Olivier Guiter1-9/+7
The extended information frame are sent by PN533 to exchange frames larger than 255 bytes. These extended frame are very close from the standard ones except for the header size length. On each incoming frame, we set the correct header length, and we do that only for the standard pn533 chipsets as the acr122 does not seem to support extended frames properly. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Split large Tx frames in chunksOlivier Guiter1-14/+130
On sending large frames (size > 262), we split it in multiple chunks and send them asynchronously with MI bit. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Add extended information frame decoding supportOlivier Guiter1-13/+72
Extended Information frames are slightly different from standard frames as they can (theorically) handle datas up tu 64kB. PN533 firmware only supports packet data up to 265 (incl. TFI byte) This kind of frame are used when the pn533 wants to exchange more than 255 bytes, and this patch handles the reception of such frames. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Enable AUTO RFCASamuel Ortiz1-3/+6
The AUTO RFCA bit forbids the pn533 chipset to turn its radio on whenever an external field is present. Without this bit set, some devices seems to get over flood by the pn533 rf field and thus become hardly detectable. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Unconditionaly select the highest p2p bit rateSamuel Ortiz1-36/+20
p2p devices must be able to support 424 kbps, so we should always select that bitrate in initiator mode. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Request System code from SENSF_REQSamuel Ortiz1-2/+2
Some devices are getting confused when not being asked for their system code with type F. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Fix the pn533 polling loopSamuel Ortiz1-1/+54
By turning the radio off after each failed polling try, we dramatically improve the pn533 polling loop efficiency. Without this fix, all Android phones running the broadcom NFC stack are almost never detected. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Fix hardware busy loop when establishing the LLCP linkSamuel Ortiz1-11/+0
By using the standard setting for the regular pn533 dongles, we no longer wait for ever for an ATR_RES. Without this, a failing ATR_REQ will put the hardware into a busy loop, constantly waiting for an ATR_RES. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: Fix missing static declarationsThierry Escande1-3/+3
This patch fixes 3 sparse warnings: nfcsim.c:63:25: sparse: symbol 'wq' was not declared. nfcsim.c:484:12: sparse: symbol 'nfcsim_init' was not declared. nfcsim.c:525:13: sparse: symbol 'nfcsim_exit' was not declared. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds8-49/+604
Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-06-14NFC: mei_phy: Clean up fileValentin Ilie1-3/+3
Fix checkpatch warnings. Replace __attribute__((__packed__)) with __packed. Replace spaces with tabs. Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add a nfc hardware simulation driverThierry Escande3-0/+552
This driver declares two virtual NFC devices supporting NFC-DEP protocol. An LLCP connection can be established between them and all packets sent from one device is sent back to the other, acting as loopback devices. Once established, the LLCP link can be disconnected by disabling the target device (with rfkill, nfctool, or neard disable-adapter test script). Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: pn533: Fix ACR122 related debug outputOlivier Guiter1-4/+4
Instead of dumping ACR122 frames as errors, we use the print_hex_dump() dynamic debug APIs. We also print an accurate IC version, as the ACR122 is pn532 based. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Remove the static supported_se fieldSamuel Ortiz4-10/+4
Supported secure elements are typically found during a discovery process initiated when the NFC controller is up and running. For a given NFC chipset there can be many configurations (embedded SE or not, with or without a SIM card wired to the NFC controller SWP interface, etc...) and thus driver code will never know before hand which SEs are available. So we remove this field, it will be replaced by a real SE discovery mechanism. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: pn533: Copy NFCID2 through ATR_REQSamuel Ortiz1-1/+13
When using NFC-F we should copy the NFCID2 buffer that we got from SENSF_RES through the ATR_REQ NFCID3 buffer. Not doing so violates NFC Forum digital requirement #189. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: pn533: Use 0x3 for SENSF_REQ Time Slot Number (TSN)Samuel Ortiz1-2/+2
LLCP validation requires TSN to be 0x03 for type F. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: NCI: Fix skb->dev usageFrederic Danis1-12/+5
skb->dev is used for carrying a net_device pointer and not an nci_dev pointer. Remove usage of skb-dev to carry nci_dev and replace it by parameter in nci_recv_frame(), nci_send_frame() and driver send() functions. NfcWilink driver is also updated to use those functions. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: pn533: Fix error return code in pn533_probe()Wei Yongjun1-1/+3
Fix to return -ENOMEM in the nfc device alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: pn544: Remove Felica and Jewel device presence checkArron Wang1-6/+3
There is no builtin command for driver to check the presence of Felica and Jewel device, it is more reasonable for the userspace daemon neard to build seperate commands to check the presence of the card. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: pn544: Identify Type F NFC-DEP through NFCID2Arron Wang1-10/+15
NFCID2 is defined as the first 2 manufacturer ID (IDm) bytes. NFC DEP (NFC peer to peer) devices Type-F NFCID2 must start with 0x01fe according to the NFC Digital Specification. By checking those first 2 bytes we send the right command either to the reader gate when NFCID2 != 0x1fe (The NFC tag case) or to the NFCIP1 gate when seeing an NFC DEP device (The NFC peer to peer case). Without this fix, Felica (Type F) tags are not properly detected with this driver. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 20:52:27 +0000