summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-drv.c
AgeCommit message (Collapse)AuthorFilesLines
2015-10-05iwlwifi: size firmware flags memory correctlyJohannes Berg1-2/+2
Instead of relying on a hard-coded constant of a maximum of 64 API and capability bits, add a new enum value after the others that will then always track the number of used bits in the API/capabilities. We thus no longer need to maintain the maximum number, and on 32-bit platforms even (currently) reduce the number of bits kept in memory. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-08-04iwlwifi: add new TLV capability flag for gscan supportAvraham Stern1-0/+40
Gscan is a scan feature which is supported on certain devices only, hence the need for a TLV flag for it. For devices that support gscan store the gscan capabilities advertised by the FW so the driver can report it to upper layers. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: mvm: Add FW paging mechanism for the UMAC on PCIMatti Gottlieb1-1/+31
Family 8000 products has 2 embedded processors, the first known as LMAC (lower MAC) and implements the functionality from previous products, the second one is known as UMAC (upper MAC) and is used mainly for driver offloads as well as new features. The UMAC is typically “less” real-time than the LMAC and is used for higher level controls. The UMAC's code/data size is estimated to be in the mega-byte arena, taking into account the code it needs to replace in the driver and the set of new features. In order to allow the UMAC to execute code that is bigger than its code memory, we allow the UMAC embedded processor to page out code pages on DRAM. When the device is master on the bus(PCI) the driver saves the UMAC's image pages in blocks of 32K in the DRAM and sends the layout of the pages to the FW. The FW can load / unload the pages on its own. The driver can support up to 1 MB of pages. Add paging mechanism for the UMAC on PCI in order to allow the program to use a larger virtual space while using less physical memory on the device. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-06-03iwlwifi: prepare for higher API/CAPA bitsJohannes Berg1-7/+19
Currently, loading the firmware fails when it has higher API or CAPA bits than the driver supports. That's an issue with integration. At the same time, actually using api[0] and capa[0] will become confusing when we also have api[1] and capa[1], and it's almost certain that we'll mix up the bits and use the bits for api[1] with api[0] by accident. Avoid all this by translating the API/CAPA bits to the regular kernel test_bit() format, and also providing wrapper functions. Also use the __bitwise__ facility of sparse to check that we're testing the right one. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-05-28iwlwifi: mvm: implement the BlockAck related debug triggersEmmanuel Grumbach1-2/+4
BlockAck sessions can have events that are interesting to debug. When we send or receive a BAR, it is may indicate that something bad is happening. Even more so when mac80211 tells us that a frame timed out in the reodering buffer. Add a few triggers for BlockAck session debugging. Allow per-TID debugging. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-04-07Merge tag 'iwlwifi-next-for-kalle-2015-04-02' of ↵Kalle Valo1-9/+33
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * some more work on LAR * fixes for UMAC scan * more work on debugging framework * more work for 8000 devices * cleanups and small bugfixes
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02iwlwifi: mvm: add trigger for time eventsEmmanuel Grumbach1-0/+2
This will allow to collect data when a time event notifcation with a certain id and action is coming from the firmware. This can be very useful to debug various flows. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-04-02iwlwifi: fix spelling errorsSara Sharon1-1/+1
Fix spelling error across the driver. Modified only comments and prints. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-04-01iwlwifi: check the size of the trigger struct from the firmware fileEmmanuel Grumbach1-0/+28
When we access the triggers we need to make sure that the data we expect was actually provided by the firmware file. Check this when we decode the triggers from the firmware file. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-26iwlwifi: drop support for early versions of 8000Emmanuel Grumbach1-8/+2
These early versions are no longer supported. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-24iwlwifi: Fix memory leak in iwl_req_fw_callback()Larry Finger1-0/+1
In this routine, kzalloc allocates a memory block. This allocation is freed in the error paths, but not in the normal exit, thus the allocation is leaked. The kmemleak facility was used to find the leak. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Intel Linux Wireless <ilw@linux.intel.com>
2015-03-12iwlwifi: fix smatch warning: warn: inconsistent indentingEmmanuel Grumbach1-9/+9
While at it, fix a few checkpatch issues. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-12iwlwifi: allow disabling LAR via module paramArik Nemtsov1-0/+4
This module parameter is useful for debugging NVM and LAR related issues. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: add framework for triggers for fw dumpEmmanuel Grumbach1-2/+44
Most of the time, the issues we want to debug with the firmware dump mechanism are transient. It is then very hard to stop the recording on time and get meaningful data. In order to solve this, I add here an infrastucture of triggers. The user will supply a list of triggers that will start / stop the recording. We have two types of triggers: start and stop. Start triggers can start a specific configuration. The stop triggers will be able to kick the collection of the data with the currently running configuration. These triggers are given to the driver by the .ucode file - just like the configuration. In the next patches, I'll add triggers in the code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: new Alive / error table APIEmmanuel Grumbach1-1/+21
The new API slightly changes the layout of the version of the firmware - prepare for that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-02-01iwlwifi: mvm: enable watchdog on Tx queues for mvmEmmanuel Grumbach1-5/+0
This watchdog allows to monitor the transmit queues. When a queue doesn't progress for a too long time, a timer fires and then, debug data can be collected. This watchdog has never been enabled on dvm controlled devices, so don't enable it there. In order to have it running on mvm controlled devices, we need to fix a small issue in the transport layer: mvm controlled devices use the shadow registers optimization. In this case, the watchdog wasn't running at all, even if enabled by the module parameter. Fix that on the way. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach1-1/+1
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Conflicts: drivers/net/wireless/iwlwifi/iwl-fw-file.h drivers/net/wireless/iwlwifi/mvm/scan.c
2015-01-22iwlwifi: mvm: move U-APSD decision to authenticationJohannes Berg1-1/+1
In order to change the usage of U-APSD on the fly later, move the enabling condition into a new function that is called when authenticated. This allows the module parameter to become writable, it won't take effect immediately but at least on the next association the new value will be used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: tlv: add support for IWL_UCODE_TLV_SDIO_ADMA_ADDR TLVLiad Kaufman1-0/+6
A new TLV supplies the ADMA address for SDIO mode, allowing the driver to configure the default base address to be this (as given in the FW), rather than hardcoding the values to use until the FW sends the ALIVE message. Use the value given by the FW in the IWL_UCODE_TLV_SDIO_ADMA_ADDR TLV for setting the default SDTM base address until the FW sends the ALIVE message. If it isn't given in the FW - use the current hardcoded values. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: pcie: add basic reference accountingEliad Peller1-0/+5
Implement the ref/unref trans ops and track both tx and host command queues (and hold references while they are not empty). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28Revert "iwlwifi: use correct fw file in 8000 b-step"Dor Shaish1-55/+0
Signed-off-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: remove MODULE_VERSIONJohannes Berg1-14/+1
The module version "in-tree:" or "in-tree:d" is useless; there should be better (functional) ways to detect whether debugging is enabled and other than that the version says nothing. Therefore remove the driver version completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-14iwlwifi: don't double free a pointer if no FW was foundEmmanuel Grumbach1-1/+1
In the very unlikely case in which no firmware could be, found. the same pointer was freed twice. Fix that. Fixes: 490fefebb6db ("iwlwifi: define the .ucode file format for debug") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: mvm: Ability to work with packed usniffer imageEran Harary1-0/+17
The new ucode package format holds also the usniffer images (in addition to the operational images and the TLVs). The driver can load the usniffer image if debug configuration tells it to. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: define the .ucode file format for debugLiad Kaufman1-15/+106
Debug information can be appended to the firmware file. This information will be used by the driver to enable / disable debugging features in the firmware. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: use correct fw file in 8000 b-stepLiad Kaufman1-0/+54
In 8000 B-step the FW file has changed, but by the time we know the HW step, the FW file is already requested. This patch defaults 8000 family to B-step if no HW step is detected in time. When it can it checks what HW step it really is (in 8000 family) and if it isn't B-step, the FW file is released and the A-step file is requested. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: move firmware file format definitions to correct headerJohannes Berg1-3/+0
The firmware file-format is described in iwl-fw-file.h, while the internal handling structures and functions are in iwl-fw.h. Fix the separation between the files by moving file format definitions to iwl-fw-file.h. Also add a missing description for a kernel-doc member, and it's not needed to include iwl-fw-file.h again from the code (thanks to Liad Kaufman). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: always run the secured flow for family 8000Eran Harary1-3/+0
In the new format the "CSS section" has the same TLV type as the "mem section". So we need to run the secured flow for all the 8000 products. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: 8000: fix fw name to account for revisionLiad Kaufman1-0/+18
The 8000 HW series also includes the revision in the FW name. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi/iwl-drv.c: fix typo defualt -> defaultToralf Förster1-1/+1
trivial, but this is user visible b/c it is in the help text Signed-off-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-03iwlwifi: add Intel Mobile Communications copyrightJohannes Berg1-0/+2
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-03iwlwifi: make U-APSD default configurable at compile timeJohannes Berg1-1/+7
With a significant number of deployed APs, enabling uAPSD leads to the AP never using aggregation sessions (likely due to the complexities involved in handling uAPSD in those.) This obviously results in a large drop in throughput with such APs. On the other hand, uAPSD can result in some power consumption benefits, but for now just disable it to get performance with affected APs back up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-06iwlwifi: fix naming mistake for the fw_monitor module parameterEmmanuel Grumbach1-1/+1
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: pcie: add firmware monitor capabilitiesEmmanuel Grumbach1-0/+4
This allows to use the firmware monitor. This capability uses a lot of contiguous memory (up to 64MB), so make its usage module parameter dependent. The driver will try to allocate as much contiguous memory as possible downgrading its requirements until the allocation succeeds. Dump this data into the fw-error dump file when an error happens. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: add device / firmware to fw-error-dump fileEmmanuel Grumbach1-0/+2
This can be useful later for parsing since the parsing may differ based on the device's family / bus. Also add the human readable version of the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: don't use hardcoded num of scan channelsDavid Spinadel1-0/+9
Use num of scan channels as advertised by fw TLV. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-15iwlwifi: mvm: add uapsd_disable module parameterMatt Chen1-0/+5
Some APs (e.g. TP-LINK TL-WA801N) are disabling aggregation (downlink to station) when U-APSD is enabled, resulting in low throughput. Add a module parameter to allow disabling U-APSD support in the driver. Also re-enable U-APSD for -9 firmware since the firmare issues were fixed in this release. There are devices that won't support U-APSD even with newer firmware, so bring the TLV flag back to detect those. Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-03-04Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c
2014-02-23iwlwifi: mvm: fix a few wd_disable commentsEliad Peller1-2/+1
Few minor comments. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-23iwlwifi: mvm: prepare infrastructure for more TLV flagsEran Harary1-0/+44
We use the TLV flags as a handshake between the firmware and the driver. These flags allow the firmware to advertise its capabilities and API version. Since we are running short of bits, we add a new infrastructure which is more scalable, yet backward compatible. We make now the difference between API changes and the capabilities. Both can have an index which allows to scale at will. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: disable TX AMPDU by default for iwldvmEmmanuel Grumbach1-1/+1
NICs supported by iwldvm don't handle well TX AMPDU. Disable it by default, still leave the possibility to the user to force enable it with a debug parameter. NICs supported by iwlmvm don't suffer from the same issue, leave TX AMPDU enabled by default for these. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-13iwlwifi: mvm: new NVM format in family 8000Eran Harary1-0/+6
Support the changes below: - Fields and sections structure were changed. - the NVM file built from DWord instead of Words. - sections header format was changed. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-03iwlwifi: fix potential buffer overrun in fw nameLiad Kaufman1-2/+3
Fix a potential buffer overrun when creating the fw name in drv->firmware_name by setting a maximal length to the char array copied to it. The maximal length is also updated to 32 rather than 25 to keep both 32bit and 64bit alignment without requiring padding to the struct it is in. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: Update Copyright to 2014Emmanuel Grumbach1-2/+2
Happy new year! Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: add a generic cipher scheme supportMax Stepanov1-0/+39
This patch adds a cipher scheme support to extend a set of the supported ciphers. The driver reads a cipher scheme list TLV from FW image and passes it to mac80211 on hw registration. After the cipher schemes are registered the driver handles key installation and Tx/Rx calls related to the new ciphers. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-11iwlwifi: support Signed firmware image and Dual CPUsEran Harary1-0/+37
Support Signed firmware based on code signing system (CSS) protocol and dual CPUs download, the code recognize if there are more than one CPU and if we need to operate the signed protocol according to the ucode binary image Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16iwlwifi: return -ENOMEM instead of NULL when OOM in iwl_drv_start()Luciano Coelho1-3/+5
The callers of iwl_drv_start() are probe functions. If a probe function returns 0, it means it succeeded. So if NULL was returned by iwl_drv_start(), it would be considered as a success. Fix this by returning -ENOMEM if the driver struct allocation fails in iwl_drv_start(). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16iwlwifi: use a macro for default probe lengthLuciano Coelho1-1/+1
Instead of assigning the default max probe length to 200 in the main code, create a macro for consistency and clarity. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-25Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg1-0/+2
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 07:56:35 +0000