summaryrefslogtreecommitdiff
path: root/drivers/memory
AgeCommit message (Collapse)AuthorFilesLines
2024-12-01Get rid of 'remove_new' relic from platform driver structLinus Torvalds14-15/+15
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-08-31memory: pl353-smc: simplify with scoped for each OF child loopKrzysztof Kozlowski1-5/+2
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20240825135001.48963-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-31memory: pl172: simplify releasing AMBA regions with devmKrzysztof Kozlowski1-15/+13
Use devm_add_action_or_reset() and dev_err_probe() to make the probe() error handling simpler around amba_release_regions() cleanup. This allows to drop the remove() callback entirely. Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://lore.kernel.org/r/20240825135001.48963-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-31memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pinsBiju Das1-1/+1
The RZ/{G2L,G2LC,V2L} SMARC EVK uses Micron MT25QU412A flash and RZ/G2UL SMARC EVK uses Renesas AT25QL128A flash. With current pin setting for IOVF pin, 4-bit flash write fails for AT25QL128A flash. Use Hi-Z state as the default for IOVF pin, so that spi controller driver in linux will be independent of flash type. To support this, during board production, the bit 4 of the NV config register must be cleared by the bootloader for Micron flash. Output from u-boot after clearing bit4 of NVCR register. => renesas_micron_flash_nvcr SF: Detected mt25qu512a with page size 256 Bytes, erase size 64 KiB, total 64 MiB NVCR=0xef Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20240830203014.199326-2-biju.das.jz@bp.renesas.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-25memory: mtk-smi: Use devm_clk_get_enabled()Rong Qianfeng1-5/+1
Replace devm_clk_get() and clk_prepare_enable() with devm_clk_get_enabled() in .probe(). Fix the bug of missing clk_disable_unprepare() in .remove() by using devm_clk_get_enabled() that can disables and unprepares it automatically on driver detach. Fixes: 3c8f4ad85c4b ("memory/mediatek: add support for mt2701") Cc: honghui.zhang@mediatek.com Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20240821032558.43052-1-rongqianfeng@vivo.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-25memory: pl353-smc: simplify with devm_clk_get_enabled()Krzysztof Kozlowski1-33/+3
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and make code simpler. Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-7-01668915bd55@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-25memory: pl353-smc: simplify with dev_err_probe()Krzysztof Kozlowski1-8/+6
Use dev_err_probe() to avoid dmesg flood on actual defer. This makes the code also simpler. Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-6-01668915bd55@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-25memory: pl172: simplify with devm_clk_get_enabled()Krzysztof Kozlowski1-18/+5
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and make code simpler. Change to dev_err_probe() in handling clk_get_rate() error to make it even simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-5-01668915bd55@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-25memory: pl172: simplify with dev_err_probe()Krzysztof Kozlowski1-4/+3
Use dev_err_probe() to avoid dmesg flood on actual defer. This makes the code also simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-4-01668915bd55@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-25memory: omap-gpmc: simplify locking with guard()Krzysztof Kozlowski1-13/+11
Simplify error handling (less gotos) over locks with guard(). Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-3-01668915bd55@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-25memory: emif: simplify locking with guard()Krzysztof Kozlowski1-9/+8
Simplify error handling (less gotos) over locks with guard(). The driver used file-scope variable 'irq_state' for storing IRQ state with spin_lock_irqsave, so move it into respective local scopes. This should be equivalent, but more readable (less global variables). Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com> Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-2-01668915bd55@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-25memory: emif: drop unused 'irq_state' memberKrzysztof Kozlowski1-1/+0
Driver does not use 'emif_data.irq_state'. Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-1-01668915bd55@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-25memory: ti-aemif: Revert "memory: ti-aemif: don't needlessly iterate over ↵Bartosz Golaszewski1-3/+5
child nodes" This reverts commit 23a641d5c2bce4c723fff9118a5d865ee6b9d05a. The first-level children of the aemif node are not the device nodes (ones containing the 'compatible' property) but the chip-select nodes which instead have their own children. of_platform_populate() will skip such nodes so we must indeed iterate over the direct children of the aemif node. The problem here is that we never call of_platform_depopulate() as it takes the root device as argument. We only have an unpopulated chip-select nodes so we will leak these devices if any of the calls to of_platform_populate() fails. I don't have a batter idea right now but my patch was not correct so we need to revert it. While at it: at least use the scoped variant of the OF node iterator. Down the line, we should find a better solution to fix this potential resource leak in error path. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20240824080235.56472-1-brgl@bgdev.pl Fixes: 23a641d5c2bc ("memory: ti-aemif: don't needlessly iterate over child nodes") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: ti-aemif: simplify with scoped for each OF child loopKrzysztof Kozlowski1-5/+2
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-13-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: ti-aemif: simplify with dev_err_probe()Krzysztof Kozlowski1-4/+3
Use dev_err_probe() to avoid dmesg flood on actual defer. This makes the code also simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-11-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: tegra30-emc: simplify with scoped for each OF child loopKrzysztof Kozlowski1-5/+2
Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-10-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: tegra20-emc: simplify with scoped for each OF child loopKrzysztof Kozlowski1-5/+2
Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-9-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: tegra124-emc: simplify with scoped for each OF child loopKrzysztof Kozlowski1-5/+2
Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-8-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: tegra-mc: simplify with scoped for each OF child loopKrzysztof Kozlowski1-8/+3
Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-7-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: stm32-fmc2-ebi: simplify with dev_err_probe()Krzysztof Kozlowski1-10/+5
dev_err_probe() combines 'return' and error code printing, thus code is a bit simpler, even if it cannot actually defer. Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-6-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: stm32-fmc2-ebi: simplify with scoped for each OF child loopKrzysztof Kozlowski1-7/+1
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-5-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: samsung: exynos5422-dmc: use scoped device node handling to simplify ↵Krzysztof Kozlowski1-20/+11
error paths Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-4-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: samsung: exynos5422-dmc: simplify dmc->dev usageKrzysztof Kozlowski1-30/+31
Store 'dmc->dev' in local 'dev' variable, to make several pieces of code using it shorter and easier to read. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-3-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: atmel-ebi: simplify with scoped for each OF child loopKrzysztof Kozlowski1-5/+3
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-2-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-21memory: atmel-ebi: use scoped device node handling to simplify error pathsKrzysztof Kozlowski1-19/+10
Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-1-9eed0ee16b78@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-14memory: tegra186-emc: drop unused to_tegra186_emc()Krzysztof Kozlowski1-5/+0
to_tegra186_emc() is not used, W=1 builds: tegra186-emc.c:38:36: error: unused function 'to_tegra186_emc' [-Werror,-Wunused-function] Fixes: 9a38cb27668e ("memory: tegra: Add interconnect support for DRAM scaling in Tegra234") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240812123055.124123-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-12memory: ti-aemif: don't needlessly iterate over child nodesBartosz Golaszewski1-7/+3
When populating devices from a specific node, we don't need to call of_platform_populate() for every child node manually - the routine will already do it. We can call it directly from the platform device's OF node. While at it: use the managed variant of of_platform_populate(). Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20240809-ti-aemif-v1-3-27b1e5001390@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-12memory: ti-aemif: use devm_clk_get_enabled() and shrink the codeBartosz Golaszewski1-23/+6
Remove several lines of code and a jump label by using the managed variant of clk_get() that also prepares and enables the clock (and disables and unprepares it on driver detach). Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20240809-ti-aemif-v1-2-27b1e5001390@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-12memory: ti-aemif: remove platform data supportBartosz Golaszewski1-24/+1
There are no longer any users of the ti-aemif driver that set up platform data from board files. We can shrink the driver by removing support for it. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20240809-ti-aemif-v1-1-27b1e5001390@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-02memory: emif: Use of_property_read_bool()Rob Herring (Arm)1-9/+4
Use of_property_read_bool() to read boolean properties rather than of_find_property(). This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240731191312.1710417-21-robh@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-07-29memory: tegra: Rework update_clock_tree_delay()Diogo Ivo1-74/+48
Further streamline this function by moving the delay post-processing to the callers, leaving it only with the task of returning the measured delay values. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-7-3e450503c555@tecnico.ulisboa.pt Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-07-29memory: tegra: Move compare/update current delay values to a functionDiogo Ivo1-47/+39
Separate the comparison/updating of the measured delay values with the values currently programmed into a separate function to simplify the code. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-6-3e450503c555@tecnico.ulisboa.pt Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-07-29memory: tegra: Loop update_clock_tree_delay()Diogo Ivo1-255/+67
As the current form of this function in a completely unrolled loop over the RAM channels roll it up two levels to improve readability. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-5-3e450503c555@tecnico.ulisboa.pt Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-07-29memory: tegra: Change macros to interpret parameter as integerDiogo Ivo1-22/+11
Convert the macros that manipulate the delay values to interpret their index parameter as an integer to allow the introduction of loops. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-4-3e450503c555@tecnico.ulisboa.pt Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-07-29memory: tegra: Reword and correct commentsDiogo Ivo1-8/+2
Fix incorrect comment on periodic_compensation_handler() as the call update_clock_tree_delay() with DVFS_UPDATE is responsible for dividing the samples accumulated up to that point and comparing the computed values with the currently programmed ones. While at it fix the indentation of a nearby comment. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-3-3e450503c555@tecnico.ulisboa.pt Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-07-29memory: tegra: Move DQSOSC measurement to common placeDiogo Ivo1-14/+11
Move the calls that instruct the RAM to capture its clock tree delays to update_clock_tree_delay() in order to avoid code duplication. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-2-3e450503c555@tecnico.ulisboa.pt Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-07-29memory: tegra: Remove periodic compensation duplicate callsDiogo Ivo1-17/+2
Prior to calling periodic_compensation_handler() the code is doing one extra DRAM delay reading which is unnecessary as this is already done in periodic_compensation_handler(), so remove these extra calls. Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Link: https://lore.kernel.org/r/20240704-tegra210_emcfreq-v4-1-3e450503c555@tecnico.ulisboa.pt Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-06-12memory: fsl_ifc: Make FSL_IFC config visible and selectableEsben Haabendal1-1/+1
While use of fsl_ifc driver with NAND flash is fine, as the fsl_ifc_nand driver selects FSL_IFC automatically, we need the CONFIG_FSL_IFC option to be selectable for platforms using fsl_ifc with NOR flash. Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Esben Haabendal <esben@geanix.com> Link: https://lore.kernel.org/r/20240530-fsl-ifc-config-v3-1-1fd2c3d233dd@geanix.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linuxLinus Torvalds1-1/+0
Pull ARM updates from Russell King: - Updates to AMBA bus subsystem to drop .owner struct device_driver initialisations, moving that to code instead. - Add LPAE privileged-access-never support - Add support for Clang CFI - clkdev: report over-sized device or connection strings * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: (36 commits) ARM: 9398/1: Fix userspace enter on LPAE with CC_OPTIMIZE_FOR_SIZE=y clkdev: report over-sized strings when creating clkdev entries ARM: 9393/1: mm: Use conditionals for CFI branches ARM: 9392/2: Support CLANG CFI ARM: 9391/2: hw_breakpoint: Handle CFI breakpoints ARM: 9390/2: lib: Annotate loop delay instructions for CFI ARM: 9389/2: mm: Define prototypes for all per-processor calls ARM: 9388/2: mm: Type-annotate all per-processor assembly routines ARM: 9387/2: mm: Rewrite cacheflush vtables in CFI safe C ARM: 9386/2: mm: Use symbol alias for cache functions ARM: 9385/2: mm: Type-annotate all cache assembly routines ARM: 9384/2: mm: Make tlbflush routines CFI safe ARM: 9382/1: ftrace: Define ftrace_stub_graph ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement ARM: 9357/2: Reduce the number of #ifdef CONFIG_CPU_SW_DOMAIN_PAN ARM: 9356/2: Move asm statements accessing TTBCR into C functions ARM: 9355/2: Add TTBCR_* definitions to pgtable-3level-hwdef.h ARM: 9379/1: coresight: tpda: drop owner assignment ARM: 9378/1: coresight: etm4x: drop owner assignment ARM: 9377/1: hwrng: nomadik: drop owner assignment ...
2024-04-18ARM: 9372/1: memory: pl353-smc: drop owner assignmentKrzysztof Kozlowski1-1/+0
Amba bus core already sets owner, so driver does not need to. Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-18-4517b091385b@linaro.org Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2024-04-11memory: mtk-smi: fix module autoloadingKrzysztof Kozlowski1-0/+2
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded based on the alias from of_device_id table. Reviewed-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240409204615.83928-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-11memory: brcmstb_memc: fix module autoloadingKrzysztof Kozlowski1-0/+1
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240410170241.248626-1-krzk@kernel.org
2024-03-21Merge tag 'char-misc-6.9-rc1' of ↵Linus Torvalds8-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ...
2024-02-27memory: stm32-fmc2-ebi: keep power domain onChristophe Kerello1-9/+32
MP25 FMC2 domain has to be kept on. To handle it throw PSCI OS-initiated, basic PM for keeping domain on is introduced. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Link: https://lore.kernel.org/r/20240226101428.37791-6-christophe.kerello@foss.st.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-27memory: stm32-fmc2-ebi: add MP25 RIF supportChristophe Kerello1-4/+220
The FMC2 revision 2 supports security and isolation compliant with the Resource Isolation Framework (RIF). From RIF point of view, the FMC2 is composed of several independent resources, listed below, which can be assigned to different security and compartment domains: - 0: Common FMC_CFGR register. - 1: EBI controller for Chip Select 1. - 2: EBI controller for Chip Select 2. - 3: EBI controller for Chip Select 3. - 4: EBI controller for Chip Select 4. - 5: NAND controller. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Link: https://lore.kernel.org/r/20240226101428.37791-5-christophe.kerello@foss.st.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-27memory: stm32-fmc2-ebi: add MP25 supportChristophe Kerello1-12/+350
Add the support of the revision 2 of FMC2 IP. - PCSCNTR register has been removed, - CFGR register has been added, - the bit used to enable the IP has moved from BCR1 to CFGR, - the timeout for CEx deassertion has moved from PCSCNTR to BCRx, - the continuous clock enable has moved from BCR1 to CFGR, - the clk divide ratio has moved from BCR1 to CFGR. The MP1 SoCs have only one signal to manage all the controllers (NWAIT). The MP25 SOC has one RNB signal for the NAND controller and one NWAIT signal for the memory controller. Let's use a platform data structure for parameters that will differ between MP1 and MP25. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Link: https://lore.kernel.org/r/20240226101428.37791-4-christophe.kerello@foss.st.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-27memory: stm32-fmc2-ebi: check regmap_read return valueChristophe Kerello1-34/+88
Check regmap_read return value to avoid to use uninitialized local variables. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Link: https://lore.kernel.org/r/20240226101428.37791-3-christophe.kerello@foss.st.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-26interconnect: constify of_phandle_args in xlateKrzysztof Kozlowski8-8/+8
The xlate callbacks are supposed to translate of_phandle_args to proper provider without modifying the of_phandle_args. Make the argument pointer to const for code safety and readability. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> # Tegra Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alim Akhtar <alim.akhtar@samsung.com> # Samsung Link: https://lore.kernel.org/r/20240220072213.35779-1-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2024-02-22memory: tegra: Fix indentationJon Hunter1-1/+1
Fix the indentation of the '.regs' member for the Tegra234 NVJPG memory client. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20240220124430.19072-3-jonathanh@nvidia.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-22memory: tegra: Add BPMP and ICC info for DLA clientsJon Hunter1-0/+30
Add the BPMP IDs and ICC type information for the Tegra234 DLA memory clients. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20240220124430.19072-2-jonathanh@nvidia.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 04:19:50 +0000