summaryrefslogtreecommitdiff
path: root/drivers/memory/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2024-06-12memory: fsl_ifc: Make FSL_IFC config visible and selectableEsben Haabendal1-1/+1
While use of fsl_ifc driver with NAND flash is fine, as the fsl_ifc_nand driver selects FSL_IFC automatically, we need the CONFIG_FSL_IFC option to be selectable for platforms using fsl_ifc with NOR flash. Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Esben Haabendal <esben@geanix.com> Link: https://lore.kernel.org/r/20240530-fsl-ifc-config-v3-1-1fd2c3d233dd@geanix.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-06-02memory: atmel-sdramc: remove the driverClaudiu Beznea1-11/+0
Driver does only clock request + enable for DDR clocks. DDR clocks are enabled by bootloader and need to stay that way in Linux. To avoid having these clocks disabled by clock subsystem in case there are no Linux consumers for them the clocks were marked as critical in clock drivers (in commit 68b3b6f1773d ("clk: at91: mark ddr clocks as critical")). With this, there is no need to have a separate driver that only does clock request + enable. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230516072405.2696225-1-claudiu.beznea@microchip.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-27memory: stm32-fmc2-ebi: depends on ARCH_STM32 instead of MACH_STM32MP157Christophe Kerello1-1/+1
To be able to compile the driver on all STM32MP SOCs, we move the "depends on" on ARCH_STM32. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Link: https://lore.kernel.org/r/20230324155105.826063-2-christophe.kerello@foss.st.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-08-18memory: brcmstb_memc: Add Broadcom STB memory controller driverFlorian Fainelli1-0/+9
Add support for configuring the Self Refresh Power Down (SRPD) inactivity timeout on Broadcom STB chips. This is used to conserve power when the DRAM activity is reduced. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220812222533.2428033-4-f.fainelli@gmail.com
2022-06-06memory: omap-gpmc: OMAP_GPMC should depend on ARCH_OMAP2PLUS || ↵Geert Uytterhoeven1-0/+1
ARCH_KEYSTONE || ARCH_K3 The Texas Instruments OMAP General Purpose Memory Controller (GPMC) is only present on TI OMAP2/3/4/5, Keystone, AM33xx, AM43x, DRA7xx, TI81xx, and K3 SoCs. Hence add a dependency on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3, to prevent asking the user about this driver when configuring a kernel without OMAP2+, Keystone, or K3 SoC family support. Fixes: be34f45f0d4aa91c ("memory: omap-gpmc: Make OMAP_GPMC config visible and selectable") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/f6780f572f882ed6ab5934321942cf2b412bf8d1.1652174849.git.geert+renesas@glider.be Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-29memory: omap-gpmc: Allow building as a moduleRoger Quadros1-1/+1
Allow OMAP_GPMC to be built as a module. When building this driver as a module, the symbol 'of_default_bus_match_table' will not be found as it is not being exported. The of_match_node() call is redundant anyways as of_platform_default_populate() already takes care of matching with 'of_default_bus_match_table'. So get rid of that call. This will also resolve the module build failure. Move compatible match table to the end where it is usually expected. Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20220426082611.24427-3-rogerq@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-29memory: omap-gpmc: Make OMAP_GPMC config visible and selectableRoger Quadros1-1/+1
So far for armv7 TI platforms, GPMC was being selected by arch/arm/mach-* architecture Kconfig files. For K3 platforms, GPMC is no longer required for basic boot and cannot be always enabled by default by mach- Kconfig. We need a way for user (or board defconfig) to enable it if required so make OMAP_GPMC Kconfig option always visible. Drop COMPILE_TEST as build fails if IRQ_DOMAIN is not enabled. Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20220426082611.24427-2-rogerq@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2021-10-10Merge branch 'for-v5.16/renesas-rpc' into mem-ctrl-nextKrzysztof Kozlowski1-0/+1
2021-10-07memory: renesas-rpc-if: RENESAS_RPCIF should select RESET_CONTROLLERGeert Uytterhoeven1-0/+1
The Renesas RPC-IF driver calls devm_reset_control_get_exclusive(), which returns -ENOTSUPP if CONFIG_RESET_CONTROLLER is not enabled. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/e443aa66d146da5646b7ebece8876545b8621063.1633447756.git.geert+renesas@glider.be Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-09-30memory: brcmstb_dpfe: Allow building Broadcom STB DPFE as moduleFlorian Fainelli1-2/+2
Allow building the Broadcom STB DPFE driver as a module, it is already a platform driver proper with all of the resource releasing device managed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Markus Mayer <mmayer@broadcom.com> Link: https://lore.kernel.org/r/20210924031459.8911-1-f.fainelli@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-02-24Merge tag 'char-misc-5.12-rc1' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict due to the dfl_device_id addition from the fpga subsystem in here" * tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits) spmi: spmi-pmic-arb: Fix hw_irq overflow Documentation: coresight: Add PID tracing description coresight: etm-perf: Support PID tracing for kernel at EL2 coresight: etm-perf: Clarify comment on perf options ACRN: update MAINTAINERS: mailing list is subscribers-only regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected MAINTAINERS: replace my with email with replacements mhi: Fix double dma free uapi: map_to_7segment: Update example in documentation uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue firewire: replace tricky statement by two simple ones vme: make remove callback return void firmware: google: make coreboot driver's remove callback return void firmware: xilinx: Use explicit values for all enum values sample/acrn: Introduce a sample of HSM ioctl interface usage virt: acrn: Introduce an interface for Service VM to control vCPU ...
2021-01-26memory: mtk-smi: Allow building as moduleYong Wu1-1/+1
Add support for building the SMI driver as module. Switch MTK_SMI to tristate, and add module_exit/module_license. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210126060055.11050-1-yong.wu@mediatek.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2021-01-07memory: dfl-emif: add the DFL EMIF private feature driverXu Yilun1-0/+9
This driver is for the EMIF private feature implemented under FPGA Device Feature List (DFL) framework. It is used to expose memory interface status information as well as memory clearing control. The purpose of memory clearing block is to zero out all private memory when FPGA is to be reprogrammed. This gives users a reliable method to prevent potential data leakage. [mdf@kernel.org: Fixed up ABI doc] Reviewed-by: Tom Rix <trix@redhat.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20210107043714.991646-9-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-05memory: renesas-rpc-if: Add RZ/G2 to Kconfig descriptionAdam Ford1-3/+3
The Renesas RPC-IF is present on the RZ/G2 Series. Add that to the description. Suggested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210102115412.3402059-2-aford173@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-12-05memory: ti-emif-sram: only build for ARMv7Arnd Bergmann1-1/+1
The driver can be compile-tested on all ARM machines, but causes a failure when built for ARMv7-M: arm-linux-gnueabi-ld: error: drivers/memory/ti-emif-sram-pm.o: conflicting architecture profiles A/M Limit the target machines to configurations that have ARMv7 enabled. Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201203230832.1481767-1-arnd@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-18memory: pl353-smc: fix compile test on !ARM_AMBAKrzysztof Kozlowski1-2/+2
The pl353-smc driver uses module_amba_driver so it has a build dependency on CONFIG_ARM_AMBA: /usr/bin/arm-linux-gnueabi-ld: drivers/memory/pl353-smc.o: in function `pl353_smc_driver_init': pl353-smc.c:(.init.text+0x10): undefined reference to `amba_driver_register' However it still can be compile tested on platforms other than ARM, which in practice is limited to those selecting ARM_AMBA (so only ARM64). Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20201029193357.389593-1-krzk@kernel.org
2020-09-16memory: omap-gpmc: Fix compile test on SPARCKrzysztof Kozlowski1-0/+1
SPARC comes without CONFIG_OF_ADDRESS thus compile testing fails on linking: /usr/bin/sparc64-linux-gnu-ld: drivers/memory/omap-gpmc.o: in function `gpmc_probe_generic_child': omap-gpmc.c:(.text.unlikely+0x14ec): undefined reference to `of_platform_device_create' Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200911143251.399-1-krzk@kernel.org
2020-08-17memory: Enable compile testing for most of the driversKrzysztof Kozlowski1-17/+22
Most of the memory controller drivers do not depend on architecture specific code so can be compile tested to increase build coverage. When compile tested, do not enable them by default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200724074038.5597-7-krzk@kernel.org
2020-08-17memory: brcmstb_dpfe: add separate entry for compile testKrzysztof Kozlowski1-0/+12
Add separate entry for Broadcom STB DPFE driver, enabled by default on ARCH_BRCMSTB. This allows compile testing. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2020-08-09Merge tag 'mtd/for-5.9' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ...
2020-08-06Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds1-1/+0
Pull MIPS upates from Thomas Bogendoerfer: - improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes * tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ...
2020-08-03Merge tag 'spi-v5.9' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for SPI, nothing really going on in the core although there's been quite a bit of driver related activity. This includes the addition of some shared code in drivers/memory for the Renesas RPC-IF which is used by a newly added SPI driver, the memory subsystem doesn't seem to have a fixed maintainer at the minute and this seemed like the most sensible way to get that hardware supported. - Quite a few cleanups and optimizations for the Altera, Qualcomm GENI, sun6i and lantiq drivers. - Several more GPIO descriptor conversions. - Move the Cadence QuadSPI driver from drivers/mtd to drivers/spi. - New support for Mediatek MT8192 and Renesas RPC-IF, R8A7742 and R8A774e1" * tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits) dt-bindings: lpspi: New property in document DT bindings for LPSPI spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK spi: lpspi: remove unused fsl_lpspi->chipselect spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register spi: rockchip: Fix error in SPI slave pio read spi: rockchip: Support 64-location deep FIFOs spi: rockchip: Config spi rx dma burst size depend on xfer length spi: spi-topcliff-pch: drop call to wakeup-disable spi: spidev: Align buffers for DMA spi: correct kernel-doc inconsistency spi: sun4i: update max transfer size reported spi: imx: enable runtime pm support spi: update bindings for MT8192 SoC spi: mediatek: add spi support for mt8192 IC spi: Add bindings for Lightning Mountain SoC spi: lantiq: Add support to Lightning Mountain SoC spi: lantiq: Move interrupt configuration to SoC specific data structure spi: lantiq: Add fifo size bit mask in SoC specific data structure spi: lantiq: Add support to acknowledge interrupt spi: lantiq: Move interrupt control register offesets to SoC specific data structure ...
2020-07-28memory: jz4780-nemc: Do not build by defaultKrzysztof Kozlowski1-1/+0
Enabling the JZ4780_NEMC driver makes sense only for specific hardware - the Ingenic SoC architecture. It is not an essential driver for the SoC support so do not enable it by default. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-24memory: Describe the MEMORY Kconfig entryKrzysztof Kozlowski1-0/+6
Write short description about the entire memory controllers section. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-07-07memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driverChristophe Kerello1-0/+10
The driver adds the support for the STMicroelectronics FMC2 EBI controller found on STM32MP SOCs. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1591975362-22009-5-git-send-email-christophe.kerello@st.com
2020-07-01memory: add Renesas RPC-IF driverSergei Shtylyov1-0/+9
Add the memory driver for Renesas RPC-IF which registers either SPI or HyperFLash device depending on the contents of the device tree subnode. It also provides the absract "back end" device APIs that can be used by the "front end" SPI/MTD drivers to talk to the real hardware. Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/9a3606ec-d4d0-c63a-4fb6-631ab38e621c@cogentembedded.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-28memory: Add Baikal-T1 L2-cache Control Block driverSerge Semin1-0/+11
Baikal-T1 SoC provides a way to tune the MIPS P5600 CM2 L2-cache performance up. It can be done by changing the L2-RAM Data/Tag/WS latencies in a dedicated register exposed by the system controller. The driver added by this commit provides a dts properties-based and sysfs-based interface for it. The device DT node is supposed to be a child of Baikal-T1 System Controller node. Link: https://lore.kernel.org/r/20200526125928.17096-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Paul Burton <paulburton@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: soc@kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-07-19Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: - A driver for SCU (system control) on NXP i.MX8QXP - Qualcomm Always-on Subsystem messaging driver (AOSS QMP) - Qualcomm PM support for MSM8998 - Support for a newer version of DRAM PHY driver for Broadcom (DPFE) - Reset controller support for Bitmain BM1880 - TI SCI (System Control Interface) support for CPU control on AM654 processors - More TI sysc refactoring and rework" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits) reset: remove redundant null check on pointer dev soc: rockchip: work around clang warning dt-bindings: reset: imx7: Fix the spelling of 'indices' soc: imx: Add i.MX8MN SoC driver support soc: aspeed: lpc-ctrl: Fix probe error handling soc: qcom: geni: Add support for ACPI firmware: ti_sci: Fix gcc unused-but-set-variable warning firmware: ti_sci: Use the correct style for SPDX License Identifier soc: imx8: Use existing of_root directly soc: imx8: Fix potential kernel dump in error path firmware/psci: psci_checker: Park kthreads before stopping them memory: move jedec_ddr.h from include/memory to drivers/memory/ memory: move jedec_ddr_data.c from lib/ to drivers/memory/ MAINTAINERS: Remove myself as qcom maintainer soc: aspeed: lpc-ctrl: make parameter optional soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors memory: tegra: Fix -Wunused-const-variable firmware: tegra: Early resume BPMP soc/tegra: Select pinctrl for Tegra194 ...
2019-06-21memory: Kconfig: Drop dependency on MACH_JZ4780 for jz4780Paul Cercueil1-1/+1
Depending on MACH_JZ4780 prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17memory: move jedec_ddr_data.c from lib/ to drivers/memory/Masahiro Yamada1-0/+8
jedec_ddr_data.c exports 3 symbols, and all of them are only referenced from drivers/memory/{emif.c,of_memory.c} drivers/memory/ is a better location than lib/. I removed the Kconfig prompt "JEDEC DDR data" because it is only select'ed by TI_EMIF, and there is no other user. There is no good reason in making it a user-configurable CONFIG option. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13memory: pl353: Add driver for arm pl353 static memory controllerNaga Sureshkumar Relli1-0/+9
Add driver for arm pl353 static memory controller. This controller is used in Xilinx Zynq SoC for interfacing the NAND and NOR/SRAM memory devices. Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-31drivers/memory/Kconfig: Add CONFIG_OF dependencyAnders Roxell1-1/+1
JZ4780_NEMC doesn't depend on OF, and if OF isn't enabled we get this error: drivers/memory/jz4780-nemc.c: In function ‘jz4780_nemc_num_banks’: drivers/memory/jz4780-nemc.c:72:10: error: implicit declaration of function ‘of_read_number’; did you mean ‘down_read_nested’? [-Werror=implicit-function-declaration] bank = of_read_number(prop, 1); ^~~~~~~~~~~~~~ down_read_nested Make JZ4780_NEMC depend on OF. Fixes: ab99e11062c1 ("memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=y") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-19memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=yBoris Brezillon1-1/+2
It just makes maintainers' life easier by allowing them to compile-test this driver without having MACH_JZ4780 enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-18memory: fsl_ifc: Allow selection of this driver when COMPILE_TEST=yBoris Brezillon1-1/+2
It just makes maintainers' life easier by allowing them to compile-test this driver without having FSL_SOC, ARCH_LAYERSCAPE or SOC_LS1021A enabled. We also need to add a dependency on HAS_IOMEM to make sure the driver compiles correctly. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-04-30memory: tegra: Squash tegra20-mc into common tegra-mc driverDmitry Osipenko1-10/+0
Tegra30+ has some minor differences in registers / bits layout compared to Tegra20. Let's squash Tegra20 driver into the common tegra-mc driver in a preparation for the upcoming MC hot reset controls implementation, avoiding code duplication. Note that this currently doesn't report the value of MC_GART_ERROR_REQ because it is located within the GART register area and cannot be safely accessed from the MC driver (this happens to work only by accident). The proper solution is to integrate the GART driver with the MC driver, much like is done for the Tegra SMMU, but that is an invasive change and will be part of a separate patch series. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-02memory: ti-emif-sram: introduce relocatable suspend/resume handlersDave Gerlach1-0/+10
Certain SoCs like Texas Instruments AM335x and AM437x require parts of the EMIF PM code to run late in the suspend sequence from SRAM, such as saving and restoring the EMIF context and placing the memory into self-refresh. One requirement for these SoCs to suspend and enter its lowest power mode, called DeepSleep0, is that the PER power domain must be shut off. Because the EMIF (DDR Controller) resides within this power domain, it will lose context during a suspend operation, so we must save it so we can restore once we resume. However, we cannot execute this code from external memory, as it is not available at this point, so the code must be executed late in the suspend path from SRAM. This patch introduces a ti-emif-sram driver that includes several functions written in ARM ASM that are relocatable so the PM SRAM code can use them. It also allocates a region of writable SRAM to be used by the code running in the executable region of SRAM to save and restore the EMIF context. It can export a table containing the absolute addresses of the available PM functions so that other SRAM code can branch to them. This code is required for suspend/resume on AM335x and AM437x to work. In addition to this, to be able to share data structures between C and the ti-emif-sram-pm assembly code, we can automatically generate all of the C struct member offsets and sizes as macros by processing emif-asm-offsets.c into assembly code and then extracting the relevant data as is done for the generated platform asm-offsets.h files. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2017-05-11Merge tag 'for-linus-20170510' of git://git.infradead.org/linux-mtdLinus Torvalds1-1/+1
Pull MTD updates from Brian Norris: "NAND, from Boris: - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc, davinci, brcmnand, omap) - a huge cleanup/rework of the denali driver accompanied with core fixes/improvements to simplify the driver code - a complete rewrite of the atmel driver to support new DT bindings make future evolution easier - the addition of per-vendor detection/initialization steps to avoid extending the nand_ids table with more extended-id entries SPI NOR, from Cyrille: - fixes in the hisi, intel and Mediatek SPI controller drivers - fixes to some SPI flash memories not supporting the Chip Erase command. - add support to some new memory parts (Winbond, Macronix, Micron, ESMT). - add new driver for the STM32 QSPI controller And a few fixes for Gemini and Versatile platforms on physmap-of" * tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits) MAINTAINERS: Update NAND subsystem git repositories mtd: nand: gpio: update binding mtd: nand: add ooblayout for old hamming layout mtd: oxnas_nand: Allocating more than necessary in probe() dt-bindings: mtd: Document the STM32 QSPI bindings mtd: mtk-nor: set controller's address width according to nor flash mtd: spi-nor: add driver for STM32 quad spi flash controller mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program mtd: nand: davinci: add comment on NAND subpage write status on keystone mtd: nand: omap2: Fix partition creation via cmdline mtdparts mtd: nand: NULL terminate a of_device_id table mtd: nand: Fix a couple error codes mtd: nand: allow drivers to request minimum alignment for passed buffer mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset mtd: nand: denali: allow to override revision number mtd: nand: denali_dt: use pdev instead of ofdev for platform_device mtd: nand: denali_dt: remove dma-mask DT property mtd: nand: denali: support 64bit capable DMA engine mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant mtd: nand: denali: support HW_ECC_FIXUP capability ...
2017-04-27memory: atmel-ebi: Simplify SMC config codeBoris Brezillon1-0/+1
New helpers/macros have been to atmel-smc.h introduced to simplify SMC regs manipulation. Rework the code to use those helpers, and simplify the ->xlate_config(), ->get_config() and ->apply_config() implementations. SMC configs are now stored in a struct atmel_smc_cs_conf object that directly contains registers values, which should help implementing ->suspend()/->resume() hooks. We can also get rid of those regmap fields (and the associated ->init() hook) which are not longer needed thanks to the atmel_[h]smc_cs_conf_{apply,get}() helpers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-03-16memory: ifc: Update dependency of IFC for LS1021AAlison Wang1-1/+1
As Freescale/NXP IFC controller is available on LS1021A, the dependency for LS1021A is added. LS1021A is an earlier product and is not compatible with later LayerScape architecture. So ARCH_LAYERSCAPE can't cover LS1021A. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-11-14memory: davinci: add support for da8xx DDR2/mDDR controllerBartosz Golaszewski1-0/+8
Create a new driver for the da8xx DDR2/mDDR controller and implement support for writing to the Peripheral Bus Burst Priority Register. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [nsekhar@ti.com: subject line adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-08-02Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtdLinus Torvalds1-1/+1
Pull MTD updates from Brian Norris: "NAND: Quoting Boris: 'This pull request contains only one notable change: - Addition of the MTK NAND controller driver And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: - A few fixes/improvements for the xway NAND controller driver - A few fixes for the sunxi NAND controller driver - Support for DMA in the sunxi NAND driver - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs - Addition for bitflips detection in erased pages to the brcmnand driver - Support for new brcmnand IPs - Update of the OMAP-GPMC binding to support DMA channel description' In addition, some small fixes around error handling, etc., as well as one long-standing corner case issue (2.6.20, I think?) with writing 1 byte less than a page. NOR: - rework some error handling on reads and writes, so we can better handle (for instance) SPI controllers which have limitations on their maximum transfer size - add new Cadence Quad SPI flash controller driver - add new Atmel QSPI flash controller driver - add new Hisilicon SPI flash controller driver - support a few new flash, and update supported features on others - fix the logic used for detecting a fully-unlocked flash And other miscellaneous small fixes" * tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits) mtd: spi-nor: don't build Cadence QuadSPI on non-ARM mtd: mtk-nor: remove duplicated include from mtk-quadspi.c mtd: nand: fix bug writing 1 byte less than page size mtd: update description of MTD_BCM47XXSFLASH symbol mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd mtd: pmcmsp-flash: Allocating too much in init_msp_flash() mtd: maps: sa1100-flash: potential NULL dereference mtd: atmel-quadspi: add driver for Atmel QSPI controller mtd: nand: omap2: fix return value check in omap_nand_probe() Documentation: atmel-quadspi: add binding file for Atmel QSPI driver mtd: spi-nor: add hisilicon spi-nor flash controller driver mtd: spi-nor: support dual, quad, and WP for Gigadevice mtd: spi-nor: Added support for n25q00a. memory: Update dependency of IFC for Layerscape mtd: nand: jz4780: Update MODULE_AUTHOR email address mtd: nand: sunxi: prevent a small memory leak mtd: nand: sunxi: add reset line support mtd: nand: sunxi: update DT bindings ...
2016-07-13memory: Update dependency of IFC for LayerscapeRaghav Dogra1-1/+1
This patch enables IFC NAND support on ARM layerscape platform. It fixes the dependency to enable NAND. The include files are being modified to ensure complilation for both PowerPC and ARM architectures. Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-06-02memory: add Atmel EBI (External Bus Interface) driverBoris Brezillon1-0/+11
The EBI (External Bus Interface) is used to access external peripherals (NOR, SRAM, NAND, and other specific devices like ethernet controllers). Each device is assigned a CS line and an address range and can have its own configuration (timings, access mode, bus width, ...). This driver provides a generic DT binding to configure a device according to its requirements. For specific device controllers (like the NAND one) the SMC timings should be configured by the controller driver through the matrix and smc syscon regmaps. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds1-0/+1
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-04-18memory: Add support for Exynos SROM driverPankaj Dubey1-0/+1
This patch adds Exynos SROM controller driver which will handle save restore of SROM registers during S2R. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [p.fedin@samsung.com: tested on SMDK5410] Tested-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> [k.kozlowski: Minor COMPILE_TEST adjustments in Kconfig entries] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-15memory: omap-gpmc: Support general purpose input for WAITPINsRoger Quadros1-0/+1
OMAPs can have 2 to 4 WAITPINs that can be used as general purpose input if not used for memory wait state insertion. The first user will be the OMAP NAND chip to get the NAND read/busy status using gpiolib. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com>
2016-02-25memory: mediatek: Add SMI driverYong Wu1-0/+8
This patch add SMI(Smart Multimedia Interface) driver. This driver is responsible to enable/disable iommu and control the power domain and clocks of each local arbiter. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-10-12memory: omap-gpmc: Fix unselectable debug option for GPMCTony Lindgren1-3/+9
Commit 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug") added a debug option for GPMC, but somehow managed to keep it unselectable. This probably happened because I had some uncommitted changes and the GPMC option is selected in the platform specific Kconfig. Let's also update the description a bit, it does not mention that enabling the debug option also disables the reset of GPMC controller during the init as pointed out by Uwe Kleine-König <u.kleine-koenig@pengutronix.de> and Roger Quadros <rogerq@ti.com>. Fixes: 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug") Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-17memory: add ARM PL172 MultiPort Memory Controller driverJoachim Eastwood1-0/+8
This driver makes it possible to configure the static memory chip selects on the ARM PL172 MultiPort Memory Controller from a set of properties in DT. Configuration of dynamic memory is not supported and is left to the boot loader. The intended usage is to setup timing and configuration for static memory devices like NAND and NOR Flash before they are probed by a driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>