summaryrefslogtreecommitdiff
path: root/drivers/mailbox
AgeCommit message (Collapse)AuthorFilesLines
2019-05-16Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk framework updates from Stephen Boyd: "One more patch to remove io.h from clk-provider.h. We used to need this include when we had clk_readl() and clk_writel(), but those are gone now so this patch pushes the dependency out to the users of clk-provider.h" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Remove io.h from clk-provider.h
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd1-0/+1
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-10Merge tag 'mailbox-v5.2' of ↵Linus Torvalds5-8/+246
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - New driver: Armada 37xx mailbox controller - Misc: Use devm_ api for imx and platform_get_irq for stm32 * tag 'mailbox-v5.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Add support for Armada 37xx rWTM mailbox dt-bindings: mailbox: Document armada-3700-rwtm-mailbox binding mailbox: stm32-ipcc: check invalid irq mailbox: imx: use devm_platform_ioremap_resource() to simplify code
2019-05-09mailbox: Add support for Armada 37xx rWTM mailboxMarek Behun3-0/+237
This adds support for the mailbox via which the kernel can communicate with the firmware running on the secure processor of the Armada 37xx SOC. The rWTM secure processor has access to internal eFuses and cryptographic circuits, such as the Entropy Bit Generator to generate true random numbers. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-05-09mailbox: stm32-ipcc: check invalid irqFabien Dessenne1-5/+8
On failure of_irq_get() returns a negative value or zero, which is not handled as an error in the existing implementation. Instead of using this API, use platform_get_irq() that returns exclusively a negative value on failure. Also, do not output an error log in case of defer probe error. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-05-09mailbox: imx: use devm_platform_ioremap_resource() to simplify codeAnson Huang1-3/+1
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-04-04acpi: Create subtable parsing infrastructureKeith Busch1-1/+1
Parsing entries in an ACPI table had assumed a generic header structure. There is no standard ACPI header, though, so less common layouts with different field sizes required custom parsers to go through their subtable entry list. Create the infrastructure for adding different table types so parsing the entries array may be more reused for all ACPI system tables and the common code doesn't need to be duplicated. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-11mailbox: imx: keep MU irq working during suspend/resumeAnson Huang1-2/+2
During noirq suspend phase, mailbox MU irq will be masked but many drivers still need to communicate with system controller firmware via mailbox, if MU irq is masked, it will cause RPC timeout as below: [ 23.372103] imx-scu scu: RPC send msg timeout Setting MU irq to be wakeup source is NOT working as GIC driver does NOT have .irq_set_wake implemented, so to support suspend/resume, just make imx mailbox driver NOT suspend, since MU is always a wakeup source on i.MX platforms with system controller inside, and its power/clock is maintained by system controller, mailbox driver no need to manage them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: ZynqMP IPI mailbox controllerWendy Liang3-0/+738
This patch is to introduce ZynqMP IPI mailbox controller driver to use the ZynqMP IPI block as mailboxes. Signed-off-by: Wendy Liang <wendy.liang@xilinx.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: stm32-ipcc: remove useless device_init_wakeup callFabien Dessenne1-2/+0
If the "wakeup-source" property does not exist there is no need to call device_init_wakeup("false") at probe. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: stm32-ipcc: do not enable wakeup source by defaultFabien Dessenne1-1/+1
By default do not enable the wakeup source. This lets the userspace application decide whether the wakeup source shall be enabled or not. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: mailbox-test: fix null pointer if no mmioFabien Dessenne1-6/+8
Fix null pointer issue if resource_size is called with no ioresource. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: mailbox-test: fix debugfs in multi-instancesFabien Dessenne1-6/+6
Create one debug entry directory per instance to support the multi instantiation. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06mailbox: tegra-hsp: mark suspend function as __maybe_unusedArnd Bergmann1-1/+1
We get a warning about this being unused when CONFIG_PM is disabled: drivers/mailbox/tegra-hsp.c:782:12: error: 'tegra_hsp_resume' defined but not used [-Werror=unused-function] Fixes: 9a63f0f40599 ("mailbox: tegra-hsp: Add suspend/resume support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-02-18mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issueRayagonda Kokatanur1-2/+2
RING_CONTROL reg was not written due to wrong address, hence all the subsequent ring flush was timing out. Fixes: a371c10ea4b3 ("mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-02-18mailbox: Export mbox_flush()Thierry Reding1-0/+1
The mbox_flush() function can be used by drivers that are built as modules, so the function needs to be exported. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: tegra-hsp: Use device-managed registration APIThierry Reding1-24/+6
In order to get rid of a lot of cleanup boilerplate code, use the device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: tegra-hsp: use devm_kstrdup_const()Bartosz Golaszewski1-32/+4
Use devm_kstrdup_const() in the tegra-hsp driver. This mostly serves as an example of how to use this new routine to shrink driver code. Also use devm_kzalloc() instead of regular kzalloc() to shrink the driver even more. Doorbell objects are only removed in the driver's remove callback so it's safe to convert all memory allocations to devres. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: tegra-hsp: Add suspend/resume supportThierry Reding1-0/+19
Upon resuming from a system sleep state, the interrupts for all active shared mailboxes need to be reenabled, otherwise they will not work. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: tegra-hsp: Add support for shared mailboxesThierry Reding1-61/+443
The Tegra HSP block supports 'shared mailboxes' that are simple 32-bit registers consisting of a FULL bit in MSB position and 31 bits of data. The hardware can be configured to trigger interrupts when a mailbox is empty or full. Add support for these shared mailboxes to the HSP driver. The initial use for the mailboxes is the Tegra Combined UART. For this purpose, we use interrupts to receive data, and spinning to wait for the transmit mailbox to be emptied to minimize unnecessary overhead. Based on work by Mikko Perttunen <mperttunen@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: Allow multiple controllers per deviceMikko Perttunen1-1/+2
Look through the whole controller list when mapping device tree phandles to controllers instead of stopping at the first one. Each controller is intended to only contain one kind of mailbox, but some devices (like Tegra HSP) implement multiple kinds and use the same device tree node for all of them. As such, we need to allow multiple mbox_controllers per device tree node. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: Support blocking transfers in atomic contextThierry Reding1-0/+28
The mailbox framework supports blocking transfers via completions for clients that can sleep. In order to support blocking transfers in cases where the transmission is not permitted to sleep, add a new ->flush() callback that controller drivers can implement to busy loop until the transmission has been completed. A new mbox_flush() function can be called by mailbox consumers in atomic context to make sure a transfer has completed. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: ti-msgmgr: Use device-managed registration APIThierry Reding1-12/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: stm32-ipcc: Use device-managed registration APIThierry Reding1-3/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: rockchip: Use device-managed registration APIThierry Reding1-14/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: qcom-apcs: Use device-managed registration APIThierry Reding1-2/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: platform-mhu: Use device-managed registration APIThierry Reding1-11/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: omap: Use device-managed registration APIThierry Reding1-3/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: mtk-cmdq: Remove needless devm_kfree() callsThierry Reding1-8/+0
Memory allocated through device-managed functions doesn't need to be explicitly freed, so these calls can be removed. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: mtk-cmdq: Use device-managed registration APIThierry Reding1-2/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: xgene-slimpro: Use device-managed registration APIThierry Reding1-10/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: sti: Use device-managed registration APIThierry Reding1-12/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: altera: Use device-managed registration APIThierry Reding1-14/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: imx: Use device-managed registration APIThierry Reding1-2/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: hi6220: Use device-managed registration APIThierry Reding1-10/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: hi3660: Use device-managed registration APIThierry Reding1-10/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: bcm-pdc: Use device-managed registration APIThierry Reding1-3/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: bcm-flexrm: Use device-managed registration APIThierry Reding1-3/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: bcm2835: Use device-managed registration APIThierry Reding1-9/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: arm-mhu: Use device-managed registration APIThierry Reding1-11/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21mailbox: Add device-managed registration functionsThierry Reding1-0/+70
Add device-managed equivalents of the mbox_controller_register() and mbox_controller_unregister() functions that can be used to have the devres infrastructure automatically unregister mailbox controllers on driver probe failure or driver removal. This can help remove a lot of boiler plate code from drivers. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: bcm2835: Switch to SPDX identifierStefan Wahren1-7/+1
Adopt the SPDX license identifier headers to ease license compliance management. Cc: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: ti-msgmgr: Off by one in ti_msgmgr_of_xlate()Dan Carpenter1-1/+1
The > comparison should be >= or we access one element beyond the end of the array. (The inst->qinsts[] array is allocated in the ti_msgmgr_probe() function and it has ->num_valid_queues elements.) Fixes: a2b79838b891 ("mailbox: ti-msgmgr: Add support for Secure Proxy") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: Hi3660: Fixup mailbox state machine malfunction issueKevin Wangtao1-12/+10
Current mailbox driver of Hi3660 release the mailbox directly before sending a new message which may cause last message lost and next message sending doesn't take effect actually. This patch fixs this issue by following the right progress below, each time before sending a message, mailbox driver will check whether the mailbox is in ready state, if last message has been acknowledged, the mailbox driver will clear the ack state to turn the mailbox to ready state again. Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Reviewed-and-tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: hi3660: constify mbox_chan_ops structureJulia Lawall1-1/+1
The mbox_chan_ops structure can be const as it is only stored in the ops field of an mbox_controller structure and this field is const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-10-29Merge tag 'mailbox-v4.20' of ↵Linus Torvalds5-9/+13
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - convert print users to use the %pOFn format specifier - enable ti-msgmr driver for the K3 platform as well - add QCS404 to compatible list of QCOM's APCS IPC driver - minor spelling fixes toogle -> toggle - kzalloc failure catch in Mediatek driver * tag 'mailbox-v4.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mediatek: Add check for possible failure of kzalloc mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle" mailbox: qcom: Add QCS404 APPS Global compatible drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3 mailbox: Convert to using %pOFn instead of device_node.name
2018-09-29mailbox: mediatek: Add check for possible failure of kzallocHoulong Wei1-0/+3
The patch 623a6143a845("mailbox: mediatek: Add Mediatek CMDQ driver") introduce the following static checker warning: drivers/mailbox/mtk-cmdq-mailbox.c:366 cmdq_mbox_send_data() error: potential null dereference 'task'. (kzalloc returns null) Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Houlong Wei <houlong.wei@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle"Colin Ian King1-3/+3
Trivial fix to spelling mistake in function name flexrm_flip_header_toogle, rename it to flexrm_flip_header_toggle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: qcom: Add QCS404 APPS Global compatibleBjorn Andersson1-0/+1
Add support for the QCS404 APPS Global block with IPC register at offset 8. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3Nishanth Menon1-4/+4
ti-msgmr driver can support K3 platforms as well. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 18:17:10 +0000