| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a /proc/interrupts formatting regression
- Have the BCM2836 interrupt controller enter power management states
properly
- Other fixlets
* tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing
genirq/proc: Add missing space separator back
irqchip/bcm2836: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v3: Fix irq_complete_ack() comment
|
|
compile-testing
Merely enabling compile-testing should not enable additional functionality.
Fixes: 0be58e0553812fcb ("irqchip/stm32mp-exti: Allow building as module")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/ef5ec063b23522058f92087e072419ea233acfe9.1733243115.git.geert+renesas@glider.be
|
|
The BCM2836 interrupt controller doesn't provide any facility to configure
the wakeup sources. That's the reason why the driver lacks the
irq_set_wake() callback for the interrupt chip.
Enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so the
interrupt suspend logic can handle the chip correctly equivalently to the
corresponding bcm2835 change (9a58480e5e53 ("irqchip/bcm2835: Enable
SKIP_SET_WAKE and MASK_ON_SUSPEND").
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/all/20241202115437.33552-1-wahrenst@gmx.net
|
|
When the GIC is in EOImode == 1 in irq_complete_ack() it executes a
priority drop not a deactivation.
Fix the function comment to clarify the behaviour.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241202112518.51178-1-lpieralisi@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return
void") .remove() is (again) the right callback to implement for platform
drivers.
Convert all platform drivers below drivers/irqchip/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done by
just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241109173828.291172-2-u.kleine-koenig@baylibre.com
|
|
When enabling GICv4.1 in hip09, VMAPP fails to clear some caches during
the unmap operation, which can causes vSGIs to be lost.
To fix the issue, invalidate the related vPE cache through GICR_INVALLR
after VMOVP.
Suggested-by: Marc Zyngier <maz@kernel.org>
Co-developed-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
|
|
Commit fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent")
introduced in v6.11-rc1 broke Mavell Armada platforms (and possibly others)
by incorrectly switching irq-mvebu-sei to MSI parent.
In the above commit, msi_parent_ops is set for the sei->cp_domain, but
rather than adding a .select method to mvebu_sei_cp_domain_ops (which is
associated with sei->cp_domain), it was added to mvebu_sei_domain_ops which
is associated with sei->sei_domain, which doesn't have any
msi_parent_ops. This makes the call to msi_lib_irq_domain_select() always
fail.
This bug manifests itself with the following kernel messages on Armada 8040
based systems:
platform f21e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown)
platform f41e0000.interrupt-controller:interrupt-controller@50: deferred probe pending: (reason unknown)
Move the select callback to mvebu_sei_cp_domain_ops to cure it.
Fixes: fbdf14e90ce4 ("irqchip/irq-mvebu-sei: Switch to MSI parent")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/E1tE6bh-004CmX-QU@rmk-PC.armlinux.org.uk
|
|
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
Using device name as format string of seq_printf() is proned to
"Format string attack", opens possibility for exploitation.
Seq_puts() is safer and more efficient.
Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20241120053055.225195-1-00107082@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
|
If the APLIC driver is probed before the IMSIC driver, the parent MSI
domain will be missing, which causes a NULL pointer dereference in
msi_create_device_irq_domain().
Avoid this by deferring probe until the parent MSI domain is available. Use
dev_err_probe() to avoid printing an error message when returning
-EPROBE_DEFER.
Fixes: ca8df97fe679 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241114200133.3069460-1-samuel.holland@sifive.com
|
|
Interrupts can be routed to maximal four virtual CPUs with real HW
EIOINTC interrupt controller model, since interrupt routing is encoded
with CPU bitmap and EIOINTC node combined method. Here add the EIOINTC
virt extension support so that interrupts can be routed to 256 vCPUs in
virtual machine mode. CPU bitmap is replaced with normal encoding and
EIOINTC node type is removed, so there are 8 bits for cpu selection, at
most 256 vCPUs are supported for interrupt routing.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add a driver for the T-HEAD C900 ACLINT SSWI device. This device allows
the system with T-HEAD cpus to send ipi via fast device interface.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241031060859.722258-3-inochiama@gmail.com
|
|
The use of of_property_read_bool() for non-boolean properties is deprecated
in favor of of_property_present() when testing for property presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/all/20241104190836.278117-1-robh@kernel.org
|
|
Christoffer reports that on some implementations, writing to
GICR_ISACTIVER0 (and similar GICD registers) can race badly with a guest
issuing a deactivation of that interrupt via the system register interface.
There are multiple reasons to this:
- this uses an early write-acknoledgement memory type (nGnRE), meaning
that the write may only have made it as far as some interconnect
by the time the store is considered "done"
- the GIC itself is allowed to buffer the write until it decides to
take it into account (as long as it is in finite time)
The effects are that the activation may not have taken effect by the time
the kernel enters the guest, forcing an immediate exit, or that a guest
deactivation occurs before the interrupt is active, doing nothing.
In order to guarantee that the write to the ISACTIVER register has taken
effect, read back from it, forcing the interconnect to propagate the write,
and the GIC to process the write before returning the read.
Reported-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241106084418.3794612-1-maz@kernel.org
|
|
Without SMP enabled (such as in allnoconfig), there is a Kconfig warning
because CONFIG_IRQ_EFFECTIVE_AFF_MASK is unconditionally selected by
CONFIG_MIPS_GIC:
WARNING: unmet direct dependencies detected for GENERIC_IRQ_EFFECTIVE_AFF_MASK
Depends on [n]: SMP [=n]
Selected by [y]:
- MIPS_GIC [=y]
Add a dependency on SMP to the selection, which matches all other
selections of CONFIG_IRQ_EFFECTIVE_AFF_MASK.
Fixes: 322a90638768 ("irqchip/mips-gic: Multi-cluster support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241101-mips-fix-generic_irq_effective_aff_mask-select-v1-1-d94db6e0de0d@kernel.org
|
|
It is possible to have zero CPU cores in a cluster; in such cases, it is
not possible to access the GIC, and any indirect access leads to an
exception.
Prevent access to such clusters by checking the number of cores in the
cluster at all places which issue indirect cluster access.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241028175935.51250-14-arikalo@gmail.com
|
|
The MIPS I6500 CPU & CM (Coherence Manager) 3.5 introduce the concept of
multiple clusters to the system. In these systems, each cluster contains
its own GIC, so the GIC isn't truly global any longer. Access to
registers in the GICs of remote clusters is possible using a redirect
register block much like the redirect register blocks provided by the
CM & CPC, and configured through the same GCR_REDIRECT register that
mips_cm_lock_other() abstraction builds upon.
It is expected that external interrupts are connected identically on all
clusters. That is, if there is a device providing an interrupt connected
to GIC interrupt pin 0 then it should be connected to pin 0 of every GIC
in the system. For the most part, the GIC can be treated as though it is
still truly global, so long as interrupts in the cluster are configured
properly.
Introduce support for such multi-cluster systems in the MIPS GIC irqchip
driver. A newly introduced gic_irq_lock_cluster() function allows:
1) Configure access to a GIC in a remote cluster via the redirect
register block, using mips_cm_lock_other().
Or:
2) Detect that the interrupt in question is affine to the local
cluster and plain old GIC register access to the GIC in the
local cluster should be used.
It is possible to access the local cluster's GIC registers via the
redirect block, but keeping the special case for them is both good for
performance (because we avoid the locking & indirection overhead of
using the redirect block) and necessary to maintain compatibility with
systems using CM revisions prior to 3.5 which don't support the redirect
block.
The gic_irq_lock_cluster() function relies upon an IRQs effective
affinity in order to discover which cluster the IRQ is affine to. In
order to track this & allow it to be updated at an appropriate point
during gic_set_affinity() select the generic support for effective
affinity using CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK.
gic_set_affinity() is the one function which gains much complexity. It
now deconfigures routing to any VP(E), ie. CPU, on the old cluster when
moving affinity to a new cluster.
gic_shared_irq_domain_map() moves its update of the IRQs effective
affinity to before its use of gic_irq_lock_cluster(), to ensure that
operation is on the cluster the IRQ is affine to.
The remaining changes are straightforward use of the gic_irq_lock_cluster()
function to select between local cluster & remote cluster code-paths when
configuring interrupts.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/all/20241028175935.51250-5-arikalo@gmail.com
|
|
In multi-cluster MIPS I6500 systems, there is a GIC per cluster.
The default shared interrupt setup configured in gic_of_init() applies only
to the GIC in the cluster containing the boot CPU, leaving the GICs of
other clusters unconfigured.
Configure the other clusters as well.
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/all/20241028175935.51250-4-arikalo@gmail.com
|
|
Use CM's GCR_CL_REDIRECT register to access registers in remote clusters,
so that users of gic_with_each_online_cpu() gains support for multi-cluster
without further changes.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/all/20241028175935.51250-3-arikalo@gmail.com
|
|
Several places in the MIPS GIC driver iterate over the online CPUs to
operate on the CPU's GIC local register block, accessed via the GIC's
other/redirect register block.
Abstract the process of iterating over online CPUs & configuring the
other/redirect region to access their registers through a new
for_each_online_cpu_gic() macro and convert all usage sites over.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/all/20241028175935.51250-2-arikalo@gmail.com
|
|
Zenghui points out that a recent change to the way set_affinity is
handled for VPEs has the potential to return an error if the VPE
hasn't been mapped yet (because the guest hasn't emited a MAPTI
command yet), affecting GICv4.0 implementations that rely on the
ITSList feature.
Fix this by making the set_affinity succeed in this case, and
return early, without trying to touch the HW.
Fixes: 1442ee0011983 ("irqchip/gic-v4: Don't allow a VMOVP on a dying VPE")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/all/20241027102220.1858558-1-maz@kernel.org
Link: https://lore.kernel.org/r/aab45cd3-e5ca-58cf-e081-e32a17f5b4e7@huawei.com
|
|
itt_alloc_pool() calls its_alloc_pages_node() to allocate an individual
page to add to the pool (for allocations <PAGE_SIZE). However the final
argument of its_alloc_pages_node() is the page order not the number of
pages. Currently it allocates two pages and leaks the second page.
Fix it by passing 0 instead (1 << 0 = 1 page).
Fixes: b08e2f42e86b ("irqchip/gic-v3-its: Share ITS tables with a non-trusted hypervisor")
Reported-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/1f6e19c4-1fb9-43ab-a8a2-a465c9cff84b@arm.com
Closes: https://lore.kernel.org/r/ed65312a-245c-4fa5-91ad-5d620cab7c6b%40nvidia.com
|
|
Support Aspeed Interrupt Controller on Aspeed Silicon SoCs.
ASPEED interrupt controller(INTC) maps the internal interrupt
sources to a parent interrupt controller, which can be GIC or INTC.
Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241016022410.1154574-3-kevin_chen@aspeedtech.com
|
|
Add driver for the Renesas RZ/V2H(P) Interrupt Control Unit (ICU).
This driver supports the external interrupts NMI, IRQn, and TINTn.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241009230817.798582-3-fabrizio.castro.jz@renesas.com
|
|
rzg2l_irqc_common_init() calls of_find_device_by_node(), but the
corresponding put_device() call is missing. This also gets reported by
make coccicheck.
Make use of the cleanup interfaces from cleanup.h to call into
__free_put_device(), which in turn calls into put_device when leaving
function rzg2l_irqc_common_init() and variable "dev" goes out of scope.
To prevent that the device is put on successful completion, assign NULL to
"dev" to prevent __free_put_device() from calling into put_device() within
the successful path.
"make coccicheck" will still complain about missing put_device() calls,
but those are false positives now.
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241011172003.1242841-1-fabrizio.castro.jz@renesas.com
|
|
When CONFIG_SMP is disabled, the static array rintc_acpi_data with size
NR_CPUS is not sufficient to hold all RINTC structures passed from the
firmware.
All RINTC structures are required to configure IMSIC/APLIC/PLIC properly
irrespective of SMP in the OS. So, allocate dynamic memory based on the
number of RINTC structures in MADT to fix this issue.
Fixes: f8619b66bdb1 ("irqchip/riscv-intc: Add ACPI support for AIA")
Reported-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/20241014065739.656959-1-sunilvl@ventanamicro.com
Closes: https://github.com/linux-riscv/linux-riscv/actions/runs/11280997511/job/31375229012
|
|
It is possible that an interrupt is disabled and masked at the same time.
When the interrupt is enabled again by enable_irq(), only plic_irq_enable()
is called, not plic_irq_unmask(). The interrupt remains masked and never
raises.
An example where interrupt is both disabled and masked is when
handle_fasteoi_irq() is the handler, and IRQS_ONESHOT is set. The interrupt
handler:
1. Mask the interrupt
2. Handle the interrupt
3. Check if interrupt is still enabled, and unmask it (see
cond_unmask_eoi_irq())
If another task disables the interrupt in the middle of the above steps,
the interrupt will not get unmasked, and will remain masked when it is
enabled in the future.
The problem is occasionally observed when PREEMPT_RT is enabled, because
PREEMPT_RT adds the IRQS_ONESHOT flag. But PREEMPT_RT only makes the problem
more likely to appear, the bug has been around since commit a1706a1c5062
("irqchip/sifive-plic: Separate the enable and mask operations").
Fix it by unmasking interrupt in plic_irq_enable().
Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241003084152.2422969-1-namcao@linutronix.de
|
|
Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.
Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.
This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor.
Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c182ece6-2ba0-ce4f-3404-dba7a3ab6c52@huawei.com
Link: https://lore.kernel.org/all/20241002204959.2051709-1-maz@kernel.org
|
|
its_create_device() over-allocated by ITS_ITT_ALIGN - 1 bytes to ensure
that an aligned area was available within the allocation. The new genpool
allocator has its min_alloc_order set to get_order(ITS_ITT_ALIGN) so all
allocations from it should be appropriately aligned.
Remove the over-allocation from its_create_device() and alignment from
its_build_mapd_cmd().
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20241002141630.433502-3-steven.price@arm.com
|
|
Within a realm guest the ITS is emulated by the host. This means the
allocations must have been made available to the host by a call to
set_memory_decrypted(). Introduce an allocation function which performs
this extra call.
For the ITT use a custom genpool-based allocator that calls
set_memory_decrypted() for each page allocated, but then suballocates the
size needed for each ITT. Note that there is no mechanism implemented to
return pages from the genpool, but it is unlikely that the peak number of
devices will be much larger than the normal level - so this isn't expected
to be an issue.
Co-developed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20241002141630.433502-2-steven.price@arm.com
|
|
Replace the open coded
if (foo)
__set_bit(n, bar);
else
__clear_bit(n, bar);
with __assign_bit(). No functional change intended.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/all/20240902130824.2878644-1-lihongbo22@huawei.com
|
|
Add support for the Advanced interrupt controller(AIC) chip in the sam9x7.
Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com>
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/all/20240903064252.49530-1-varshini.rajendran@microchip.com
|
|
Set error to -ENOMEM if kcalloc() fails or if irq_domain_add_linear()
fails inside of plic_probe() instead of returning 0.
Fixes: 4d936f10ff80 ("irqchip/sifive-plic: Probe plic driver early for Allwinner D1 platform")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240903-correct_error_codes_sifive_plic-v1-1-d929b79663a2@rivosinc.com
Closes: https://lore.kernel.org/r/202409031122.yBh8HrxA-lkp@intel.com/
|
|
The "per-CPU IDs ... at base ..." info log is outputting a physical
address, not a PPN.
Fixes: 027e125acdba ("irqchip/riscv-imsic: Add device MSI domain support for platform devices")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/20240909085610.46625-2-ajones@ventanamicro.com
|
|
Add comment to the sticky register clearing code.
Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240925184416.54204-3-matsievskiysv@gmail.com
|
|
Controllers, supported by this driver, have two sets of registers:
* (main) interrupt registers control peripheral interrupt sources.
* device interrupt registers configure per-device (network interface)
interrupts and act as an extra stage before the main interrupt
registers.
In the driver unmask code, device trigger registers are used in the mask
calculation of the main interrupt sticky register, mixing two kinds of
registers.
Use the main interrupt trigger register instead.
Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240925184416.54204-2-matsievskiysv@gmail.com
|
|
Commit b5712bf89b4b ("irqchip/gic-v3-its: Provide MSI parent for
PCI/MSI[-X]") moves the functionality of irq-gic-v3-its-pci-msi.c into
irq-gic-v3-its-msi-parent.c, and drops the former file.
With that, the config option ARM_GIC_V3_ITS_PCI is obsolete, but the
definition of that config was not removed in the commit above.
Remove this obsolete config ARM_GIC_V3_ITS_PCI.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240926125502.363364-1-lukas.bulwahn@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
Starting from the A11 (T8015) SoC, Apple introuced system registers for
fast IPI and UNCORE PMC control. These sysregs do not exist on earlier
A7-A10 SoCs and trying to access them results in an instant crash.
Restrict sysreg access within the AIC driver to configurations where
use_fast_ipi is true to allow AIC to function properly on A7-A10 SoCs.
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/all/20240901034143.12731-5-towinchenmi@gmail.com
|
|
Starting with the A11 (T8015) SoC, Apple began using arm64 sysregs for
fast IPIs. However, on A11, there is no such things as "Local" fast IPIs,
as the SYS_IMP_APL_IPI_RR_LOCAL_EL1 register does not seem to exist.
Add a new feature level, used by the compatible "apple,t8015-aic",
controlled by a static branch key named use_local_fast_ipi. When
use_fast_ipi is true and use_local_fast_ipi is false, fast IPIs are used
but all IPIs goes through the register SYS_IMP_APL_IPI_RR_GLOBAL_EL1, as
"global" IPIs.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/all/20240901034143.12731-4-towinchenmi@gmail.com
|
|
use_fast_ipi is true by default and there is no need to "enable" it.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/all/20240901034143.12731-3-towinchenmi@gmail.com
|
|
Add ACPI support in PLIC driver. Use the mapping created early during
boot to get details about the PLIC.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Co-developed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-18-sunilvl@ventanamicro.com
[ rjw: Rebase on top of recent irqchip changes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add ACPI support in APLIC drivers. Use the mapping created early during
boot to get the details about the APLIC.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-17-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
RISC-V IMSIC interrupt controller provides IPI and MSI support.
Currently, DT based drivers setup the IPI feature early during boot but
defer setting up the MSI functionality. However, in ACPI systems, PCI
subsystem is probed early and assume MSI controller is already setup.
Hence, both IPI and MSI features need to be initialized early itself.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-16-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While populating IMSIC global structure, many fields are initialized
using DT properties. Make the code which uses DT properties as separate
function so that it is easier to add ACPI support later. No
functionality added/changed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-15-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The RINTC subtype structure in MADT also has information about other
interrupt controllers. Save this information and provide interfaces to
retrieve them when required by corresponding drivers.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-14-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce the advanced extended interrupt controllers (AVECINTC). This
feature will allow each core to have 256 independent interrupt vectors
and MSI interrupts can be independently routed to any vector on any CPU.
The whole topology of irqchips in LoongArch machines looks like this if
AVECINTC is supported:
+-----+ +-----------------------+ +-------+
| IPI | --> | CPUINTC | <-- | Timer |
+-----+ +-----------------------+ +-------+
^ ^ ^
| | |
+---------+ +----------+ +---------+ +-------+
| EIOINTC | | AVECINTC | | LIOINTC | <-- | UARTs |
+---------+ +----------+ +---------+ +-------+
^ ^
| |
+---------+ +---------+
| PCH-PIC | | PCH-MSI |
+---------+ +---------+
^ ^ ^
| | |
+---------+ +---------+ +---------+
| Devices | | PCH-LPC | | Devices |
+---------+ +---------+ +---------+
^
|
+---------+
| Devices |
+---------+
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Co-developed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823104337.25577-2-zhangtianyang@loongson.cn
|
