summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook9-20/+21
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook4-7/+9
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'powerpc-4.18-1' of ↵Linus Torvalds1-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for split PMD page table lock on 64-bit Book3S (Power8/9). - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live patching again. - Add support for patching barrier_nospec in copy_from_user() and syscall entry. - A couple of fixes for our data breakpoints on Book3S. - A series from Nick optimising TLB/mm handling with the Radix MMU. - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre. - Several series optimising various parts of the 32-bit code from Christophe Leroy. - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"), which is why the diffstat has so many deletions. And many other small improvements & fixes. There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details around pkey support. It was ack'ed/reviewed by Ingo & Dave and has been in next for several weeks. Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing" * tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits) powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap cpuidle: powernv: Fix promotion from snooze if next state disabled powerpc: fix build failure by disabling attribute-alias warning in pci_32 ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait() powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted" powerpc: fix spelling mistake: "Usupported" -> "Unsupported" powerpc/pkeys: Detach execute_only key on !PROT_EXEC powerpc/powernv: copy/paste - Mask SO bit in CR powerpc: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove support for Marvell mv64x60 i2c controller powerpc/boot: Remove support for Marvell MPSC serial controller powerpc/embedded6xx: Remove C2K board support powerpc/lib: optimise PPC32 memcmp powerpc/lib: optimise 32 bits __clear_user() powerpc/time: inline arch_vtime_task_switch() powerpc/Makefile: set -mcpu=860 flag for the 8xx powerpc: Implement csum_ipv6_magic in assembly powerpc/32: Optimise __csum_partial() powerpc/lib: Adjust .balign inside string functions for PPC32 ...
2018-06-01hwmon: (asus_atk0110) Make use of device managed memoryBastian Germann1-36/+8
Use devm_* variants of kstrdup and kzalloc. Get rid of kfree cleanups. Signed-off-by: Bastian Germann <bastiangermann@fishpost.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-06-01hwmon: (asus_atk0110) Replace deprecated device register callBastian Germann1-50/+25
Make the asus_atk0110 driver use hwmon_device_register_with_groups instead of the deprecated hwmon_device_register. Construct the expected attribute_group array from the sensor list which contains all needed attributes. Remove the manual sysfs file creation and deletion that are now taken care of by the (un)register calls via the attribute_group array. Signed-off-by: Bastian Germann <bastiangermann@fishpost.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-06-01hwmon: (k10temp) Make function get_raw_temp staticColin Ian King1-1/+1
The function get_raw_temp is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/hwmon/k10temp.c:149:14: warning: symbol 'get_raw_temp' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21Merge tag 'ib-mfd-hwmon-v4.18' into hwmon-nextGuenter Roeck1-0/+60
Immutable branch between MFD and HWMON due for the v4.18 merge window
2018-05-21hwmon: (ltc2990) support all measurement modesTom Levens2-33/+170
Updated version of the ltc2990 driver which supports all measurement modes (current, voltage, temperature) available in the chip. If devicetree is used, the mode must be specified with the property "lltc,meas-mode". The format and possible values of the property are described in the binding. If devicetree is not used, the mode of the chip will not be configured. Unless the chip is configured by another source, only the internal temperature and supply voltage will be measured. Signed-off-by: Tom Levens <tom.levens@cern.ch> Tested-By: mike.looijmans@topic.nl [groeck: Fixed compiler warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (ltc2990) Fix incorrect conversion of negative temperaturesTom Levens1-14/+4
Fix incorrect conversion of negative temperatures by using sign_extend32() instead of a home-grown conversion function. Fixes: df922703574e ("hwmon: Add LTC2990 sensor driver") Signed-off-by: Tom Levens <tom.levens@cern.ch> [groeck: Updated subject and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (core) check parent dev != NULL when chip != NULLLucas Magasweran1-0/+3
hwmon_device_register_with_info() registration API requires a non-NULL parent device when chip is non-NULL. This commit adds a check and documents this requirement. Signed-off-by: Lucas Magasweran <lucas.magasweran@ieee.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (fschmd) fix typo 'can by' to 'can be'Wolfram Sang1-1/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (k10temp) Display both Tctl and TdieGuenter Roeck1-7/+48
On some AMD CPUs, there is a different between the die temperature (Tdie) and the reported temperature (Tctl). Tdie is the real measured temperature, and Tctl is used for fan control. Lets report both for affected CPUs. Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (k10temp) Add support for Stoney Ridge and Bristol Ridge CPUsGuenter Roeck1-0/+5
Add support for Stoney Ridge and Bristol Ridge (Family 15h Model 0x70) CPUs. Registers match those of Family 15h Model 0x60. Cc: stable@vger.kernel.org # v4.16+ Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (ibmpowernv) Add energy sensorsShilpasri G Bhat1-0/+2
This patch exports the accumulated power numbers of each power sensor maintained by OCC. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-21hwmon: (ibmpowernv): Add support to read 64 bit sensorsShilpasri G Bhat1-3/+4
The firmware has supported for reading sensor values of size u32. This patch adds support to use newer firmware functions which allows to read the sensors of size u64. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-13hwmon: (k10temp) Use API function to access System Management NetworkGuenter Roeck2-6/+7
The SMN (System Management Network) on Family 17h AMD CPUs is also accessed from other drivers, specifically EDAC. Accessing it directly is racy. On top of that, accessing the SMN through root bridge 00:00 is wrong on multi-die CPUs and may result in reading the temperature from the wrong die. Use available API functions to fix the problem. For this to work, add dependency on AMD_NB. Also change the Raven Ridge PCI device ID to point to Data Fabric Function 3, since this ID is used by the API functions to find the CPU node. Cc: stable@vger.kernel.org # v4.16+ Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-04-29hwmon: (k10temp) Fix reading critical temperature registerGuenter Roeck1-10/+30
The HTC (Hardware Temperature Control) register has moved for recent chips. Cc: stable@vger.kernel.org # v4.16+ Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-04-25hwmon: (k10temp) Add support for AMD Ryzen w/ Vega graphicsGuenter Roeck1-0/+5
Enable k10temp for AMD Ryzen APUs w/ Vega Mobile Gfx. Based on patch from René Rebe <rene@exactcode.de>. Dropped temperature offsets since those are not supposed to apply for the affected CPUs. Cc: stable@vger.kernel.org # v4.16+ Cc: René Rebe <rene@exactcode.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-04-25hwmon: (k10temp) Add temperature offset for Ryzen 2700XGuenter Roeck1-3/+9
Ryzen 2700X has a temperature offset of 10 degrees C. If bit 19 of the Temperature Control register is set, there is an additional offset of 49 degrees C. Take this into account as well. Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-04-23hwmon: (nct6683) Enable EC access if disabled at bootGuenter Roeck1-2/+2
On Asrock Z370M Pro4, it was observed that EC access was disabled after initially booting the system. As a result, the driver failed to load with nct6683: EC is disabled After a suspend/resume cycle, the driver loaded correctly. nct6683: Found NCT6683D or compatible chip at 0x2e:0xa20 nct6683 nct6683.2592: NCT6683D EC firmware version 1.0 build 07/18/16 Enable EC access after identifying the chip if disabled to fix the problem. Warn the user that the data it reports may be unusable, similar to other drivers for chips from Nuvoton. Fixes: 41082d66bfd6f ("hwmon: Driver for NCT6683D") Reported-by: Jonathan Sims <jonathan.625266@earthlink.net> Tested-by: Jonathan Sims <jonathan.625266@earthlink.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-04-22hwmon: (scmi) handle absence of few types of sensorsSudeep Holla1-1/+4
Currently the loop checks for non-zero count of sensors for each type of sensors which is completely wrong. It also results in aborting the registration of sensors if one or more types of sensors are completely not supported by the platform SCMI firmware. This patch fixes the issue by continue to loop and skiping sensor types that are not present. Fixes: b23688aefb8b ("hwmon: add support for sensors exported via ARM SCMI") Reported-by: Jim Quinlan <james.quinlan@broadcom.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-04-16hwmon: MC13783: Add uid and die temperature sensor inputsAndrey Gusakov1-0/+60
The uid and die temperature can be read out on the ADIN7 using input mux. Map uid and die temperature sensor to channels 16 and 17. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-09Merge tag 'hwmon-for-linus-v4.17' of ↵Linus Torvalds10-201/+612
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - added chip support: new Centaur CPUs, ADM1272, NCT6796D - ucd9000: added debugfs attributes, gpio support - cleanup and minor bug fixes * tag 'hwmon-for-linus-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (via-cputemp) support new centaur CPUs hwmon: (nct6775) Fix writing pwmX_mode hwmon: (lm92) Add max6635 to lm92_id[] hwmon: (pmbus/adm1275) Add support for ADM1272 hwmon: (lm92) Do not try to detect MAX6635 hwmon: (ucd9000) Add debugfs attributes to provide mfr_status hwmon: (ucd9000) Add gpio chip interface hwmon: (nct6775) Add support for NCT6796D hwmon: (nct6775) Initialize boolean variables with declaration hwmon: (nct6775) Improve fan6/pwm6 support hwmon: (nct6775) Use NUM_FAN consistently hwmon: (g762) handle cleanup with devm_add_action hwmon: (sht3x) Update data sheet URL hwmon: (sht21) Update data sheet URLs hwmon: (pmbus/adm1275) Accept negative page register values hwmon: (pmbus/max8688) Accept negative page register values
2018-03-30hwmon: (via-cputemp) support new centaur CPUsdavidwang1-13/+18
New centaur CPUs (Familiy == 7) also support this cpu temperature sensor. Signed-off-by: David Wang <davidwang@zhaoxin.com> [groeck: Dropped changelog, updated subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-27hwmon: (nct6775) Fix writing pwmX_modeGuenter Roeck1-5/+5
pwmX_mode is defined in the ABI as 0=DC mode, 1=pwm mode. The chip register bit is set to 1 for DC mode. This got mixed up, and writing 1 into pwmX_mode resulted in DC mode enabled. Fix it up by using the ABI definition throughout the driver for consistency. Fixes: 77eb5b3703d99 ("hwmon: (nct6775) Add support for pwm, pwm_mode, ... ") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-27Merge tag 'scmi-fixes-4.17' of ↵Arnd Bergmann1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers Pull "ARM SCMI fixes/cleanups for v4.17" from Sudeep Holla: Couple of fixes for build warning due to uninitialised variable and static checker warning for passing NULL pointer to PTR_ERR. It also contains cleanup suggested by Stephen Boyd in SCMI clock driver using the new devm_of_clk_add_hw_provider() API. * tag 'scmi-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove firmware: arm_scmi: prevent accessing rate_discrete uninitialized hwmon: (scmi) return -EINVAL when sensor information is unavailable
2018-03-22hwmon: (lm92) Add max6635 to lm92_id[]Alvaro G. M1-2/+3
Since autodetection of this chip was removed, it makes sense to add prefix max6635 so that the device can be instantiated by its actual name. Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-22hwmon: (pmbus/adm1275) Add support for ADM1272Guenter Roeck2-3/+68
The chip is quite similar to other chips in the series, but as usual it comes with its own quirks. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-22hwmon: (lm92) Do not try to detect MAX6635Alvaro G. M1-58/+0
Maxim MAX663x family are mostly compatible with LM92, but they lack any identification register. Weakening the detect function would make it prone to false positives, and current one doesn't detect all chips. Therefore, the detect function for max6635 devices is removed in favor of explicit device instatiation. Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-20hwmon: (scmi) return -EINVAL when sensor information is unavailableSudeep Holla1-1/+1
Passing NULL pointer to PTR_ERR will result in return value of 0 indicating success which is clearly not what it is intended here. This patch returns -EINVAL instead when the sensor information is not available. Fixes: b23688aefb8b ("hwmon: add support for sensors exported via ARM SCMI") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-03-16hwmon: (ucd9000) Add debugfs attributes to provide mfr_statusChristopher Bostic1-1/+137
Expose the gpiN_fault fields of mfr_status as individual debugfs attributes. This provides a way for users to be easily notified of gpi faults. Also provide the whole mfr_status register in debugfs. Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-16hwmon: (ucd9000) Add gpio chip interfaceChristopher Bostic1-0/+212
Add a struct gpio_chip and define some methods so that this device's I/O can be accessed via /sys/class/gpio. Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10hwmon: (nct6775) Add support for NCT6796DGuenter Roeck2-52/+125
NCT6796D is mostly compatible to NCT6795D. It supports an additional pwm control and fan speed channel. While we are at it, update documentation for NCT6795D. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10hwmon: (nct6775) Initialize boolean variables with declarationGuenter Roeck1-24/+4
Initialize boolean flags in nct6775_check_fan_inputs() while declaring them instead of several times throughout the code. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10hwmon: (nct6775) Improve fan6/pwm6 supportGuenter Roeck1-7/+30
Improve fan6/pwm6 detection on NCT6795D. Add support for fan pulses for fans 4..6 and fan min limits for fan6. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10hwmon: (nct6775) Use NUM_FAN consistentlyGuenter Roeck1-6/+6
The size of some of the arrays using the number of fans is hardcoded. Use NUM_FAN consistently throughout the driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10hwmon: (g762) handle cleanup with devm_add_actionHao Peng1-39/+14
Simplify code and use devm_add_action() to handle cleanup. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> [groeck: Dropped unnecessary dummy function and NULL check] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10hwmon: (sht21) Update data sheet URLsDanilo Bargen1-2/+1
The previously used URLs are dead. Sensirion provides permalinks for their product datasheets at https://www.sensirion.com/en/about-us/links/. Signed-off-by: Danilo Bargen <mail@dbrgn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10hwmon: (pmbus/adm1275) Accept negative page register valuesGuenter Roeck1-2/+2
A negative page register value means that no page needs to be selected. This is used by status register read operations and needs to be accepted. The failure to do so so results in missed status and limit registers. Fixes: da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10hwmon: (pmbus/max8688) Accept negative page register valuesGuenter Roeck1-1/+1
A negative page register value means that no page needs to be selected. This is used by status register evaluations and needs to be accepted. Fixes: da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-07Merge tag 'scmi-updates-4.17' of ↵Arnd Bergmann3-0/+238
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers Pull "ARM SCMI support for v4.17" from Sudeep Holla: ARM System Control and Management Interface(SCMI)[1] is more flexible and easily extensible than any of the existing interfaces. Few existing as well as future ARM platforms provide micro-controllers to abstract various power and other system management tasks which have similar interfaces, both in terms of the functions that are provided by them, and in terms of how requests are communicated to them. There are quite a few protocols like ARM SCPI, TI SCI, QCOM RPM, Nvidia Tegra BPMP, and so on already. This specification is to standardize and avoid any further fragmentation in the design of such interface by various vendors. The current SCMI driver implementation is very basic and initial support. It lacks support for notifications, asynchronous/delayed response, perf/power statistics region and sensor register region. Mailbox is the only form of transport supported currently in the driver. SCMI supports interrupt based mailbox communication, where, on completion of the processing of a message, the caller receives an interrupt as well as polling for completion. SCMI is designed to minimize the dependency on the mailbox/transport hardware. So in terms of SCMI, each channel in the mailbox includes memory area, doorbell and completion interrupt. However the doorbell and completion interrupt is highly mailbox dependent which was bit of controversial as part of SCMI/mailbox discussions. Arnd and me discussed about the few aspects of SCMI and the mailbox framework: 1. Use of mailbox framework for doorbell type mailbox controller: - Such hardware may not require any data to be sent to signal the remote about the presence of a message. The channel will have in-built information on how to trigger the signal to the remote. There are few mailbox controller drivers which are purely doorbell based. e.g.QCOM IPC, STM, Tegra, ACPI PCC,..etc 2. Supporting other mailbox controller: - SCMI just needs a mechanism to signal the remote firmware. Such controller may need fixed message to be sent to trigger a doorbell. In such case we may need to get that data from DT and pass the same to the controller. It's not covered in the current DT binding, but can be extended as optional property in future. However handling notifications may be interesting on such mailbox, but again there is no way to interpret what the data field(remote message) means, it could be a bit mask or a number or don't-care. Arnd mentioned that he doesn't like the way the mailbox binding deals with doorbell-type hardware, but we do have quite a few precedent drivers already and changing the binding to add a data field would not make it any better, but could cause other problems. So he is happy with the status quo of SCMI implementation. [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0056a/index.html * tag 'scmi-updates-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: cpufreq: scmi: add support for fast frequency switching cpufreq: add support for CPU DVFS based on SCMI message protocol hwmon: add support for sensors exported via ARM SCMI hwmon: (core) Add hwmon_max to hwmon_sensor_types enumeration clk: add support for clocks provided by SCMI firmware: arm_scmi: add device power domain support using genpd firmware: arm_scmi: add per-protocol channels support using idr objects firmware: arm_scmi: refactor in preparation to support per-protocol channels firmware: arm_scmi: add option for polling based performance domain operations firmware: arm_scmi: add support for polling based SCMI transfers firmware: arm_scmi: probe and initialise all the supported protocols firmware: arm_scmi: add initial support for sensor protocol firmware: arm_scmi: add initial support for power protocol firmware: arm_scmi: add initial support for clock protocol firmware: arm_scmi: add initial support for performance protocol firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices firmware: arm_scmi: add common infrastructure and support for base protocol firmware: arm_scmi: add basic driver infrastructure for SCMI dt-bindings: arm: add support for ARM System Control and Management Interface(SCMI) protocol dt-bindings: mailbox: add support for mailbox client shared memory
2018-02-28hwmon: add support for sensors exported via ARM SCMISudeep Holla3-0/+238
Create a driver to add support for SoC sensors exported by the System Control Processor (SCP) via the System Control and Management Interface (SCMI). The supported sensor types is one of voltage, temperature, current, and power. The sensor labels and values provided by the SCP are exported via the hwmon sysfs interface. Cc: linux-hwmon@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-02-15Merge tag 'hwmon-for-linus-v4.16-rc2' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix bad temperature display on Ryzen/Threadripper" * tag 'hwmon-for-linus-v4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (k10temp) Only apply temperature offset if result is positive
2018-02-14Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar: "Here's the latest set of Spectre and PTI related fixes and updates: Spectre: - Add entry code register clearing to reduce the Spectre attack surface - Update the Spectre microcode blacklist - Inline the KVM Spectre helpers to get close to v4.14 performance again. - Fix indirect_branch_prediction_barrier() - Fix/improve Spectre related kernel messages - Fix array_index_nospec_mask() asm constraint - KVM: fix two MSR handling bugs PTI: - Fix a paranoid entry PTI CR3 handling bug - Fix comments objtool: - Fix paranoid_entry() frame pointer warning - Annotate WARN()-related UD2 as reachable - Various fixes - Add Add Peter Zijlstra as objtool co-maintainer Misc: - Various x86 entry code self-test fixes - Improve/simplify entry code stack frame generation and handling after recent heavy-handed PTI and Spectre changes. (There's two more WIP improvements expected here.) - Type fix for cache entries There's also some low risk non-fix changes I've included in this branch to reduce backporting conflicts: - rename a confusing x86_cpu field name - de-obfuscate the naming of single-TLB flushing primitives" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) x86/entry/64: Fix CR3 restore in paranoid_exit() x86/cpu: Change type of x86_cache_size variable to unsigned int x86/spectre: Fix an error message x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping selftests/x86/mpx: Fix incorrect bounds with old _sigfault x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]() x86/speculation: Add <asm/msr-index.h> dependency nospec: Move array_index_nospec() parameter checking into separate macro x86/speculation: Fix up array_index_nospec_mask() asm constraint x86/debug: Use UD2 for WARN() x86/debug, objtool: Annotate WARN()-related UD2 as reachable objtool: Fix segfault in ignore_unreachable_insn() selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory selftests/x86/pkeys: Remove unused functions selftests/x86: Clean up and document sscanf() usage selftests/x86: Fix vDSO selftest segfault for vsyscall=none x86/entry/64: Remove the unused 'icebp' macro ...
2018-02-15x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_steppingJia Zhang4-6/+6
x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com> [ Updated it to more recent kernels. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-12hwmon: (k10temp) Only apply temperature offset if result is positiveGuenter Roeck1-1/+4
A user reports a really bad temperature on Ryzen 1950X. k10temp-pci-00cb Adapter: PCI adapter temp1: +4294948.3°C (high = +70.0°C) This will happen if the temperature reported by the chip is lower than the offset temperature. This has been seen in the field if "Sense MI Skew" and/or "Sense MI Offset" BIOS parameters were set to unexpected values. Let's report a temperature of 0 degrees C in that case. Fixes: 1b50b776355f ("hwmon: (k10temp) Add support for temperature offsets") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-27hwmon: (dell-smm) Disable fan support for Dell Vostro 3360Oleksandr Natalenko1-0/+7
Calling fan related SMM functions implemented by Dell BIOS firmware on Dell Vostro 3360 freeze kernel for about 500ms. Unfortunately, it is unlikely for Dell to fix this since the machine is pretty old, so this commit just disables fan support to make the system usable again. Via "force" module param fan support can be enabled. Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751 Link: http://lkml.iu.edu/hypermail/linux/kernel/1711.2/06083.html Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-27hwmon: (dell-smm) Disable fan support for Dell Inspiron 7720Pali Rohár1-1/+39
Calling fan related SMM functions implemented by Dell BIOS firmware on Dell Inspiron 7720 freeze kernel for about 500ms. Until Dell fixes it we need to disable fan support for Dell Inspiron 7720 as it makes system unusable. Via "force" module param fan support can be enabled. Reported-by: vova7890@mail.ru Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751 Cc: stable@vger.kernel.org # v4.0+, will need backport Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-27hwmon: (dell-smm) Enable broken functionality via "force" module paramPali Rohár1-2/+5
Some Dell machines are broken and some functionality is disabled. Show warning into dmesg about this fact and allow user via "force" module param to override brokenness and enable broken functionality. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-19hwmon: (k10temp) Add temperature offset for Ryzen 1900XGuenter Roeck1-0/+1
Like the other CPUs from the same series, the 1900X has a temperature offset of 27 degrees C. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 19:26:07 +0000