summaryrefslogtreecommitdiff
path: root/drivers/hwmon/lm63.c
AgeCommit message (Collapse)AuthorFilesLines
2017-04-02hwmon: (lm63) Add OF device ID tableJavier Martinez Canillas1-0/+23
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-01-02hwmon: (lm63) use permission-specific DEVICE_ATTR variantsJulia Lawall1-25/+23
Use DEVICE_ATTR_RO for read only attributes and DEVICE_ATTR_RW for read/write attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The conversion was done automatically using coccinelle. It was validated by compiling both the old and the new source code and comparing its text, data, and bss size. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: (lm63) Fix smatch warningsGuenter Roeck1-17/+10
smatch complains as follows when checking lm63.c. drivers/hwmon/lm63.c:594 set_temp11() warn: '65504' 65504 can't fit into 32767 'data->temp11[nr]' drivers/hwmon/lm63.c:596 set_temp11() warn: '32768' 32768 can't fit into 32767 'data->temp11[nr]' Fix by using DIV_ROUND_CLOSEST and clamp_val to convert the values. While we are at it, modify other macros as well for consistency and to make the code easier to understand. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-04hwmon: (lm63) Avoid initializing the same field twiceJean Delvare1-1/+0
data is kzalloc'd, so data->valid is already 0. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2014-04-04hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck1-66/+40
Simplify code, reduce code size, attach hwmon attributes to hwmon device. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-04hwmon: (lm63) Create all sysfs groups in one callGuenter Roeck1-28/+14
We can create all sysfs groups in one call by using sysfs_create_groups instead of using sysfs_create_group individually for each group. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-04hwmon: (lm63) Introduce 'dev' variable to point to client->devGuenter Roeck1-16/+16
client->dev is used multiple times in several functions. Introduce dev variable pointing to it to simplify the code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-04hwmon: (lm63) Add additional sysfs group for temp2_type attributeGuenter Roeck1-3/+13
With the new hwmon API, we can only add groups of attributes, not individual attributes. To prepare for the use of the new API, add an additional sensor group for the temp2_type attribute and register it with sysfs_create_group instead of device_create_file. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-01-29Update Jean Delvare's e-mail addressJean Delvare1-2/+2
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2013-07-08hwmon: (lm63) Drop redundant safety on cache lifetimeJean Delvare1-3/+2
time_after (as opposed to time_after_equal) already ensures that the cache lifetime is at least as much as requested. There is no point in manually adding another jiffy to that value, and this can confuse the reader into wrong interpretation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Imre Deak <imre.deak@intel.com>
2013-01-25hwmon: Replace SENSORS_LIMIT with clamp_valGuenter Roeck1-4/+4
SENSORS_LIMIT and the generic clamp_val have the same functionality, and clamp_val is more efficient. This patch reduces text size by 9052 bytes and bss size by 11624 bytes for x86_64 builds. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: George Joseph <george.joseph@fairview5.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21hwmon: (lm63) Convert to use devm_ functionsGuenter Roeck1-10/+4
Convert to use devm_ functions to reduce code size and simplify the code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-23hwmon: (lm63) Let the user adjust the lookup tableJean Delvare1-42/+76
Make the automatic fan speed control lookup table writable. This lets the user tweak the fan speed / temperature response curve. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Tested-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-23hwmon: (lm63) Make fan speed control strategy changeableJean Delvare1-16/+89
Let the user switch between automatic and manual fan speed control. Before switching to automatic fan speed control, we always check that the lookup table looks sane. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-23hwmon: (lm63) Reorganize the codeJean Delvare1-206/+187
Reorder functions and driver declaration to no longer need to forward-declare functions. Also rename new_client to just client everywhere for readability. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18hwmon: convert drivers/hwmon/* to use module_i2c_driver()Axel Lin1-12/+1
This patch converts the drivers in drivers/hwmon/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com> Cc: David George <david.george@ska.ac.za> Cc: "Hans J. Koch" <hjk@hansjkoch.de> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) Support extended lookup table of LM96163Jean Delvare1-7/+62
The LM96163 has an extended lookup table with 12 entries instead of 8, add support for that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) Expose automatic fan speed control lookup tableJean Delvare1-14/+134
The LM63 and compatible devices have a lookup table to control the fan speed automatically. Expose it in sysfs. Values are cached for 5 seconds, independently of the other register values to avoid slowing down "sensors". We might make the table values writable in the future. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) Fix incorrect comment about I2C addressJean Delvare1-1/+4
What was true of the LM63 doesn't apply to the LM64. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) LM64 has a dedicated pin for tachometerJean Delvare1-3/+7
On the LM64, the tachometer function has a dedicated pin and fan speed monitoring is always enabled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16hwmon: (lm63) Add sensor type attribute for external sensor on LM96163Guenter Roeck1-0/+50
On LM96163, the external temperature sensor type is configurable to either a thermal diode or a 3904 transistor. The chip reports a wrong temperature if misconfigured. Add writable attribute to support it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for update_interval sysfs attributeGuenter Roeck1-2/+90
The update interval is configurable on LM63 and compatibles. Add support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for writing the external critical temperatureGuenter Roeck1-11/+44
On LM64, the external critical temperature limit is always writable. On LM96163, it is writable if the chip is configured for it. Add conditional support for writing the register dependent on chip type and configuration. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for unsigned upper temperature limitsGuenter Roeck1-11/+51
LM96163 supports unsigned upper limits for the external temperature sensor. Add support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for LM96163Guenter Roeck1-5/+36
LM96163 is an enhanced version of LM63 with improved PWM resolution. Add chip detection code as well as support for improved PWM resolution if the chip is configured to use it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Add support for external temperature offset registerGuenter Roeck1-3/+13
LM63 and compatibles support a temperature offset register for the external temperature sensor. Add support for it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16hwmon: (lm63) Fix checkpatch errorsGuenter Roeck1-21/+53
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-02-09hwmon: (lm63) Consider LM64 temperature offsetDirk Eibach1-12/+47
LM64 has 16 degrees Celsius temperature offset on all remote sensor registers. This was not considered When LM64 support was added to lm63.c. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@kernel.org
2010-05-27hwmon: (lm63) Add basic support for LM64Matthew Garrett1-4/+12
The LM64 appears to be an LM63 with added GPIO lines. Add support for the hwmon functionality - GPIO can be added at some later stage if someone has a need for them. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-14i2c: Drop I2C_CLIENT_INSMOD_1Jean Delvare1-7/+1
This macro simply declares an enum, so drivers might as well declare it themselves. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-14i2c: Get rid of struct i2c_client_address_dataJean Delvare1-1/+1
Struct i2c_client_address_data only contains one field at this point, which makes its usefulness questionable. Get rid of it and pass simple address lists around instead. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-14i2c: Drop the kind parameter from detect callbacksJean Delvare1-3/+2
The "kind" parameter always has value -1, and nobody is using it any longer, so we can remove it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-09hwmon: Clean up detect functionsJean Delvare1-30/+24
As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Riku Voipio <riku.voipio@iki.fi> Acked-by: "Hans J. Koch" <hjk@linutronix.de> Cc: Rudolf Marek <r.marek@assembler.cz>
2008-07-16hwmon: (lm63) Convert to a new-style i2c driverJean Delvare1-55/+44
The new-style lm63 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-18hwmon: normal_i2c arrays should be constMark M. Hoffman1-1/+1
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches1-1/+1
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-09hwmon: Convert from class_device to deviceTony Jones1-5/+5
Convert from class_device to device for hwmon_device_register/unregister Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon: Fault files naming conventionJean Delvare1-2/+2
We have the following naming convention documented in Documentation/hwmon/sysfs-interface for fault files: in[0-*]_input_fault fan[1-*]_input_fault temp[1-*]_input_fault Some drivers follow this convention (lm63, lm83, lm90, smsc47m192). However some drivers omit the "input" part and create files named fan1_fault (pc87427) or temp1_fault (dme1737). And the new "generic" libsensors follows this second (non-standard) convention, so it fails to report fault conditions for drivers which follow the standard. We want a single naming scheme, and everyone seems to prefer the shorter variant, so let's go for it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-09-28hwmon: Fix unchecked return status, batch 4Jean Delvare1-37/+52
hwmon: Fix unchecked return status, batch 4 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Note: f71805f actually checked the status from device_create_file already. However it did not remove the files on device destruction. It was also an opportunity to use sysfs_create/remove_group instead of hand-made loops. This makes the changes much more important but I think the result is worth it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Add individual alarm files to 4 driversJean Delvare1-1/+32
hwmon: Add individual alarm files to 4 drivers Add individual sysfs files for all f71805f, lm63, lm83 and lm90 alarm and fault conditions. This is a requirement for the planned chip-independent libsensors. Almost all other hwmon drivers will need the same improvement. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] hwmon: Semaphore to mutex conversionsIngo Molnar1-14/+15
convert drivers/hwmon/*.c semaphore use to mutexes. the conversion was generated via scripts, and the result was validated automatically via a script as well. all affected hwmon drivers were build-tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05[PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer neededGreg Kroah-Hartman1-1/+0
Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
2006-01-05[PATCH] i2c: Drop i2c_driver.{owner,name}, 3 of 11Laurent Riffard1-2/+4
We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the hwmon drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05[PATCH] i2c: Drop i2c_driver.flags, 2 of 3Jean Delvare1-1/+0
Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we can simply make it the default and drop the flag. If any driver really doesn't want to be notified when i2c adapters are added, that driver can simply omit to set .attach_adapter. This approach is also more robust as it prevents accidental NULL pointer dereferences. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] hwmon: kzalloc conversionDeepak Saxena1-2/+1
Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] hwmon: hwmon vs i2c, second round (06/11)Jean Delvare1-2/+1
The only thing left in i2c-sensor.h are module parameter definition macros. It's only an extension of what i2c.h offers, and this extension is not sensors-specific. As a matter of fact, a few non-sensors drivers use them. So we better merge them in i2c.h, and get rid of i2c-sensor.h altogether. Signed-off-by: Jean Delvare <khali@linux-fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] hwmon: hwmon vs i2c, second round (04/11)Jean Delvare1-1/+1
i2c_probe and i2c_detect now do the exact same thing and operate on the same data structure, so we can have everyone call i2c_probe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C: refactor message in i2c_detach_clientJean Delvare1-4/+1
We could refactor the error message 34 different i2c drivers print if i2c_detach_client() fails in this function itself. Saves quite a few lines of code. Documentation is updated to reflect that change. Note that this patch should be applied after Rudolf Marek's w83792d patches. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (7/9)Jean Delvare1-1/+0
Kill normal_isa in header files, documentation and all chip drivers, as it is no more used. normal_i2c could be renamed to normal, but I decided not to do so at the moment, so as to limit the number of changes. This might be done later as part of the i2c_probe/i2c_detect merge. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C hwmon: add hwmon sysfs class to driversMark M. Hoffman1-1/+15
This patch modifies sensors chip drivers to make use of the new sysfs class "hwmon". Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 11:23:37 +0000