summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/tilcdc/tilcdc_regs.h
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18drm/tilcdc: ensure nonatomic iowrite64 is not usedLogan Gunthorpe1-1/+1
Add a check to ensure iowrite64 is only used if it is atomic. It was decided in [1] that the tilcdc driver should not be using an atomic operation (so it was left out of this patchset). However, it turns out that through the drm code, a nonatomic header is actually included: include/linux/io-64-nonatomic-lo-hi.h is included from include/drm/drm_os_linux.h:9:0, from include/drm/drmP.h:74, from include/drm/drm_modeset_helper.h:26, from include/drm/drm_atomic_helper.h:33, from drivers/gpu/drm/tilcdc/tilcdc_crtc.c:19: And thus, without this change, this patchset would inadvertantly change the behaviour of the tilcdc driver. [1] lkml.kernel.org/r/CAK8P3a2HhO_zCnsTzq7hmWSz5La5Thu19FWZpun16iMnyyNreQ@mail.gmail.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Jyri Sarha <jsarha@ti.com>
2016-11-30drm/tilcdc: Enable frame done irq and functionality for LCDC rev 1Jyri Sarha1-0/+1
We should wait for the last frame to complete before shutting things down also on LCDC rev 1. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Add tilcdc_write_mask() to tilcdc_regs.hJyri Sarha1-0/+13
Add tilcdc_write_mask() for handling register field wider than one bit and mask values for those fields. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-11-30drm/tilcdc: Enable sync lost error and recovery handling for rev 1 LCDCJyri Sarha1-0/+1
Revision 1 LCDC support also sync lost errors and can benefit from sync lost recovery routine. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2016-09-01drm/tilcdc: Write DMA base and ceiling address with single instructionJyri Sarha1-0/+14
Write DMA base and ceiling address with a single instruction, if available. This should make it more unlikely that LCDC would fetch the DMA addresses in the middle of an update. Having bad combination of addresses in dma base and ceiling (e.g base > ceiling) can cause unpredictaple behavior in LCDC. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-28drm/tilcdc: support pixel widths greater than 1024Darren Etheridge1-0/+1
TI LCD controller version 2 has an extended eleventh bit that enables horizontal resolutions greater than 1024 pixels to be specified (upto 2048). This patch adds support for setting this bit on LCDC V2. Signed-off-by: Darren Etheridge <detheridge@ti.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-19drm/tilcdc: add TI LCD Controller DRM driver (v4)Rob Clark1-0/+154
A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>