summaryrefslogtreecommitdiff
path: root/drivers/dma/dw
AgeCommit message (Collapse)AuthorFilesLines
2015-10-31dmaengine: dw: some Intel devices has no memcpy supportAndy Shevchenko1-1/+5
Provide a flag to choose if the device does support memory-to-memory transfers. At least this is not true for iDMA32 controller that might be supported in the future. Besides that Intel BayTrail and Braswell users should not try this feature due to HW specific behaviour. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-31dmaengine: dw: platform: provide platform data for IntelAndy Shevchenko1-1/+16
Provide platform data explicitly for Intel SoCs where dw_dmac is enumerated by ACPI. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-31dmaengine: dw: don't override platform data with autocfgAndy Shevchenko1-30/+27
Let probe driver decide either it wants to auto configure the driver or have explicitly defined properties. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30dmaengine: dw: use dw_dmac autoconfiguration in PCI driverAndy Shevchenko1-13/+7
Instead of hardconding a platform data for dw_dmac let's use it's own autoconfiguration feature. Thus, remove hardcoded values. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30dmaengine: dw: convert to __ffs()Andy Shevchenko1-6/+6
We replace __fls() by __ffs() since we have to find a *minimum* data width that satisfies both source and destination. While here, rename dwc_fast_fls() to dwc_fast_ffs() which it really is. Fixes: 4c2d56c574db (dw_dmac: introduce dwc_fast_fls()) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30dmaengine: dw: properly read DWC_PARAMS registerAndy Shevchenko1-2/+2
In case we have less than maximum allowed channels (8) and autoconfiguration is enabled the DWC_PARAMS read is wrong because it uses different arithmetic to what is needed for channel priority setup. Re-do the caclulations properly. This now works on AVR32 board well. Fixes: fed2574b3c9f (dw_dmac: introduce software emulation of LLP transfers) Cc: yitian.bu@tangramtek.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-04Merge tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-3/+3
Pull dmaengine updates from Vinod Koul: "This time we have aded a new capability for scatter-gathered memset using dmaengine APIs. This is supported in xdmac & hdmac drivers We have added support for reusing descriptors for examples like video buffers etc. Driver will follow The behaviour of descriptor ack has been clarified and documented New devices added are: - dma controller in sun[457]i SoCs - lpc18xx dmamux - ZTE ZX296702 dma controller - Analog Devices AXI-DMAC DMA controller - eDMA support for dma-crossbar - imx6sx support in imx-sdma driver - imx-sdma device to device support Other: - jz4780 fixes - ioatdma large refactor and cleanup for removal of ioat v1 and v2 which is deprecated and fixes - ACPI support in X-Gene DMA engine driver - ipu irq fixes - mvxor fixes - minor fixes spread thru drivers" [ The Kconfig and Makefile entries got re-sorted alphabetically, and I handled the conflict with the new Intel integrated IDMA driver by slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in order to keep the Intel entries together. I think it might be a good idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make the sorting be a true sort, not this mismash. Also, this merge disables the COMPILE_TEST for the sun4i DMA controller, because it does not compile cleanly at all. - Linus ] * tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits) dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs dmaengine :ipu: change ipu_irq_handler() to remove compile warning dmaengine: ioatdma: Fix variable array length dmaengine: ioatdma: fix sparse "error" with prep lock dmaengine: hdmac: Add memset capabilities dmaengine: sort the sh Makefile dmaengine: sort the sh Kconfig dmaengine: sort the dw Kconfig dmaengine: sort the Kconfig dmaengine: sort the makefile drivers/dma: make mv_xor.c driver explicitly non-modular dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller devicetree: Add bindings documentation for Analog Devices AXI-DMAC dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests dmaengine: ioatdma: fix coccinelle warning dmaengine: ioatdma: fix zero day warning on incompatible pointer type dmaengine: tegra-apb: Simplify locking for device using global pause dmaengine: tegra-apb: Remove unnecessary return statements and variables dmaengine: tegra-apb: Avoid unnecessary channel base address calculation dmaengine: tegra-apb: Remove unused variables ...
2015-08-24dmaengine: sort the dw KconfigVinod Koul1-3/+3
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-07-17Update Viresh Kumar's email addressViresh Kumar1-1/+1
Switch to my kernel.org alias instead of a badly named gmail address, which I rarely use. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-24Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-11/+9
Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...
2015-04-22dmaengine: dw: don't prompt for DW_DMAC_COREVinod Koul1-1/+1
DW_DMAC_CORE is slected by PCI or Platform driver, so this symbol shouldn't be user selectable, so remove the prompt Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16dmaengine: dw: Make error prints unique. Part #2Jarkko Nikula1-8/+4
The same error message is printed from different switch cases. Since both of these jump into same error label we can move error print there and add a DMA direction in order to make it easier to grep error from sources. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16dmaengine: dw: Make error prints unique. Part #1Jarkko Nikula1-2/+4
The same error message is printed from different functions. Add a function name to error message in order to make it easier to grep error from sources. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16dmaengine: dw: append MODULE_ALIAS for platform driverAndy Shevchenko1-1/+4
The commit 9cade1a46c77 (dma: dw: split driver to library part and platform code) introduced a separate platform driver but missed to add a MODULE_ALIAS("platform:dw_dmac"); to that module. The patch adds this to get driver loaded automatically if platform device is registered. Reported-by: "Blin, Jerome" <jerome.blin@intel.com> Fixes: 9cade1a46c77 (dma: dw: split driver to library part and platform code) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05dmaengine: dw: don't handle interrupt when dmaengine is not usedJie Yang1-1/+1
When dma controller is not used by any user and set off, we should disble interrupt handler, at least the interrupt reset part, for some subsystem, e.g. ADSP, may use the dma in its own logic, here reset the interrupt may make this subsystem work abnormally. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-44/+65
Pull dmaengine updates from Vinod Koul: "This update brings: - the big cleanup up by Maxime for device control and slave capabilities. This makes the API much cleaner. - new IMG MDC driver by Andrew - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with bunch of fixes on rcar drivers - odd fixes and updates spread over driver" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits) dmaengine: pl330: add DMA_PAUSE feature dmaengine: pl330: improve pl330_tx_status() function dmaengine: rcar-dmac: Disable channel 0 when using IOMMU dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR dmaengine: rcar-dmac: Fix spinlock issues in interrupt dmaenegine: edma: fix sparse warnings dmaengine: rcar-dmac: Fix uninitialized variable usage dmaengine: shdmac: extend PM methods dmaengine: shdmac: use SET_RUNTIME_PM_OPS() dmaengine: pl330: fix bug that cause start the same descs in cyclic dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers dmaengine: at_xdmac: simplify channel configuration stuff dmaengine: at_xdmac: introduce save_cc field dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel ioat: fail self-test if wait_for_completion times out dmaengine: dw: define DW_DMA_MAX_NR_MASTERS dmaengine: dw: amend description of dma_dev field dmatest: move src_off, dst_off, len inside loop ...
2015-02-04dmaengine: dw: define DW_DMA_MAX_NR_MASTERSAndy Shevchenko3-4/+5
Instead of using magic number in the code the patch provides DW_DMA_MAX_NR_MASTERS constant. While here, restrict the reading of data width array by amount of the actual number of AHB masters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13dmaengine: dw: provide DMA capabilitiesAndy Shevchenko1-1/+15
The new DMAEngine requirement is to provide what the DMA controller can do, such as directions, bus widths, and residue granularity. The patch sets those properties for the DesignWare DMA controller driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13dmaengine: dw: balance PM runtime callsAndy Shevchenko2-2/+5
In case of PCI driver we will get a warning: dw_dmac_pci 0000:00:18.0: Unbalanced pm_runtime_enable! dw_dmac_pci 0000:00:18.0: DesignWare DMA Controller, 8 channels This happens due to pm_runtime_enable() call from the driver when PM runtime is enabled by core. This patch moves that call to the platform driver where it might make sense. Fixes: bb32baf76e56 (dmaengine: dw: enable runtime PM) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: dw: update the driver commentsVinod Koul1-1/+1
driver comment refers to DMA_SLAVE_CONFIG which needs to be updated to .device_config Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: dw: Split device_controlMaxime Ripard1-38/+44
Split the device_control callback of the DesignWare DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-11dmaengine: dw: enable runtime PMAndy Shevchenko1-0/+11
On runtime PM aware platforms the DMA have to manage its own power state. This patch enables runtime PM support and applies necessary calls wherever it's needed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Scott Ashcroft <scott.ashcroft@talk21.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-15dmaengine: dw: export probe()/remove() and Co to usersAndy Shevchenko1-26/+3
The driver library functions can be used directly by the compound devices such as ADSP or serial driver where DesignWare DMA IP is privately attached to the main hardware. Instead of creating a new platform device leaf they may call dw_dma_probe() with given struct dw_dma_chip directly and make sure that the main device is DMA capable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15dmaengine: dw: enable and disable controller when neededAndy Shevchenko2-25/+36
Enable controller automatically whenever first user requires for a channel and disable it when the last user gone. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15dmaengine: dw: always export dw_dma_{en,dis}ableAndy Shevchenko4-30/+12
Instead of conditional exporing of dw_dma_suspend() / dw_dma_resume() let's export dw_dma_disable() / dw_dma_enable(). Since dw_dma_shutdown() repeats dw_dma_disable() we may safely remove it at all. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15dmaengine: dw: introduce dw_dma_on() helperAndy Shevchenko1-2/+7
As an opposite to dw_dma_off() let's introduce dw_dma_on() helper. It will be useful later as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15dmaengine: dw: split dma-dw.h to platform and private partsAndy Shevchenko1-0/+2
The introduced include/linux/dma/dw.h is going to contain the private extensions and structures which are shared for dw_dmac users in the kernel. Meanwhile include/linux/platform_data/dma-dw.h keeps only platform related data types and definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15dmaengine: dw: move private definitions to regs.hAndy Shevchenko1-3/+29
Since we don't allow user to set registers directly through private slave configuration we may move definitions to the regs.h because they are not used anywhere except core.c part. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11dmaengine: dw: add PCI IDs for Braswell DMAsAndy Shevchenko1-0/+4
Braswell SoC has two DMA controllers for LPSS. This patch adds them to supported list in the PCI driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11dmaengine: dw: move clock operations to platform.cAndy Shevchenko4-20/+24
On BayTrail platform DMA is not functional in the PCI mode, whereby it always failed and exit at the point when it tries to get a clock. It causes the PCI mode probe to exit with the error message: dw_dmac_pci: probe of 0000:00:1e.0 failed with error -2 This patch moves clock operations to where it belongs to. Thus, the clock is provided only in ACPI / non-PCI cases. Reported-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11dmaengine: dw: introduce generic filter functionAndy Shevchenko3-67/+40
The introduced filter function would be reused in the ACPI and DT cases since in those cases we have to apply mandatory data to the requested channel. Thus, patch moves platform driver to use it in that case. The function unlikely can't be used by users of the driver due to an implicit dependency to the dw_dmac_core module. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11dmaengine: dw: apply both HS interfaces and remove slave_id usageAndy Shevchenko3-35/+10
Instead of one request line member let's use both source and destination ones. Usually we have no such hardware except Atmel MMC controller found on AVR32 platform (see arch/avr32/mach-at32ap/at32ap700x.c and drivers/mmc/host/atmel-mci.c). This patch removes slave_id usage since it'll be removed from the generic structure in later. This breaks the non-ACPI / non-DT cases for the users of the driver, i.e. SPI and HSUART. However, these cases mean only PCI enumerated devices for now, which is anyway broken (considering more than one DMA controller in the system) and this patch series is intended to fix that eventually. The ACPI and DT cases shall be aware of the channel direction when setting request lines, but this is a minor problem that would be addressed in future. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11dmaengine: dw: convert dw_dma_slave to use explicit HS interfacesAndy Shevchenko1-2/+2
Instead of exposing the possibility to set DMA registers CFG_HI and CFG_LO strict user to provide handshake interfaces explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11dmaengine: dw: move dw_dmac.h to where it belongs toAndy Shevchenko2-4/+4
There is a common storage for platform data related structures and definitions inside kernel source tree. The patch moves file from include/linux to include/linux/platform_data and renames it acoordingly. The users are also updated. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [For the arch/avr32/.* and .*sound/atmel.*] Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15dmaengine: dw: don't perform DMA when dmaengine_submit is calledAndy Shevchenko1-12/+7
Accordingly to discussion [1] and followed up documentation the DMA controller driver shouldn't start any DMA operations when dmaengine_submit() is called. This patch fixes the workflow in dw_dmac driver to follow the documentation. [1] http://www.spinics.net/lists/arm-kernel/msg125987.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15dmaengine: dw: add debug message to dwc_dostart_first_queuedAndy Shevchenko1-1/+5
It would be useful to know when the first descriptor in the queue is started along with its cookie. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15dmaengine: dw: introduce dwc_dostart_first_queued() helperAndy Shevchenko1-8/+11
We have a duplicate code which starts first descriptor in the queue. Let's make this as a separate helper that can be used in future as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-06-09Merge branch 'topic/dw' into for-linusVinod Koul1-19/+39
2014-05-22dmaengine: dw: check return code of dma_async_device_register()Andy Shevchenko1-2/+6
dma_async_device_register() may return non-zero error code. In such case we have to follow error path. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-22dmaengine: dw: fix regression in dw_probe() functionAndy Shevchenko1-9/+24
The commit dbde5c29 "dw_dmac: use devm_* functions to simplify code" turns probe function to use devm_* helpers and simultaneously brings a regression. We have to 1) call clk_disable_unprepare() on error path, and 2) check error code of clk_enable_prepare(). First part was done in the original code, second one is an update. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-22dmaengine: dw: enable clock before accessAndy Shevchenko1-5/+5
hclk signal is a bus clock. So, it means we have to have it enabled during access to the DMA controller. This patch makes sure that we enable clock before access to the device, though it currently works on Intel hardware. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-21dma: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han1-1/+1
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is deprecated. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dmaengine: dw: went back to plain {request,free}_irq() callsAndy Shevchenko1-5/+6
The commit dbde5c29 "dw_dmac: use devm_* functions to simplify code" turns probe function to use devm_* helpers and simultaneously brings a regression. We need to ensure irq is disabled, followed by ensuring that don't schedule any more tasklets and then its safe to use tasklet_kill(). The free_irq() will ensure that the irq is disabled and also wait till all scheduled interrupts are executed by invoking synchronize_irq(). So we need to only do tasklet_kill() after invoking free_irq(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dmaengine: dw: convert to use SET_LATE_SYSTEM_SLEEP_PM_OPSAndy Shevchenko1-8/+2
The commit 4501fe61 "dma: dw: Add suspend and resume handling for PCI mode DW_DMAC." introduces system power management callbacks. Regarding to commit f78c4cff "PM / Sleep: Add macro to define common late/early system PM callbacks" we have nice macro to setup dev_pm_ops structure. This patch converts a driver to use the macro. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dmaengine: dw: move PM to suspend_late / resume_early stagesAndy Shevchenko1-14/+4
There is no need to use *_noirq version of suspend and resume PM callbacks. The suspend_late / resume_early suit better (it was discussed in [1]) and in future could be used for runtime PM support. [1] http://www.spinics.net/lists/kernel/msg1650974.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-26dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.Chew, Chiau Ee1-0/+33
This is to disable/enable DW_DMAC hw during late suspend/early resume. Since DMA is providing service to other clients (eg: SPI, HSUART), we need to ensure DMA suspends after the clients and resume before the clients are active. Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-26dma: dw: allocate memory in two stages in probeAndy Shevchenko2-9/+12
This makes the probe() function a little bit clearer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-17dma: dw: remove leftovers in the comment blocksAndy Shevchenko1-2/+2
There is couple of leftovers in the comment blocks. This patch modifies the comments accordingly. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-11dma: dw: add a PCI ID for Intel Haswell SoCAndy Shevchenko1-0/+3
In case of PCI mode the DMA controller has a specific ID. Put this ID to the list of supported. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dma: dw: use %pad instead of casting dma_addr_tAndy Shevchenko1-8/+6
Since we have nice helper to print dma_addr_t values by reference we may use it instead of explicit casting to a longest type. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 14:17:15 +0000