Age | Commit message (Collapse) | Author | Files | Lines |
|
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
clk-next
- Add support for SAMA7G5 SoC clks
- Microchip Sparx5 DPLL clk
* clk-microchip:
clk: sparx5: Add Sparx5 SoC DPLL clock driver
dt-bindings: clock: sparx5: Add bindings include file
* clk-mmp:
clk: mmp: avoid missing prototype warning
* clk-unused:
clk: drop unused function __clk_get_flags
* clk-at91:
clk: at91: sama7g5: add clock support for sama7g5
clk: at91: clk-utmi: add utmi support for sama7g5
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs
clk: at91: add macro for pll ids mask
clk: at91: clk-programmable: add mux_table option
clk: at91: clk-peripheral: add support for changeable parent rate
clk: at91: clk-master: add master clock support for SAMA7G5
clk: at91: clk-generated: add mux_table option
clk: at91: clk-generated: pass the id of changeable parent at registration
clk: at91: replace conditional operator with double logical not
clk: at91: sckc: register slow_rc with accuracy option
clk: at91: sam9x60: fix main rc oscillator frequency
clk: at91: sam9x60-pll: use frac when setting frequency
clk: at91: sam9x60-pll: check fcore against ranges
clk: at91: sam9x60-pll: use logical or for range check
clk: at91: clk-sam9x60-pll: fix mul mask
clk: at91: clk-generated: check best_rate against ranges
clk: at91: clk-generated: continue if __clk_determine_rate() returns error
clk: at91: fix possible dead lock in new drivers
|
|
'clk-debugfs' into clk-next
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
* clk-actions:
MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
clk: actions: Add Actions S500 SoC Reset Management Unit support
dt-bindings: reset: Add binding constants for Actions S500 RMU
clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
clk: actions: Fix h_clk for Actions S500 SoC
* clk-rockchip:
clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks
clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328"
clk: rockchip: use separate compatibles for rk3288w-cru
dt-bindings: clocks: add rk3288w variant compatible
clk: rockchip: Handle clock tree for rk3288w variant
clk: rockchip: convert rk3036 pll type to use internal lock status
clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout
clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout
* clk-iproc:
clk: iproc: round clock rate to the closest
* clk-intel:
clk: intel: Avoid unnecessary memset by improving code
clk: intel: Improve locking in the driver
clk: intel: Use devm_clk_hw_register() instead of clk_hw_register()
* clk-debugfs:
clk: Add support for enabling/disabling clocks from debugfs
|
|
The function __clk_get_flags has not been used since the April 2019
commit a348f05361c9 ("ARM: omap2+: hwmod: drop CLK_IS_BASIC
flag usage"). Other uses were removed in June 2015, eg by
commit 98d8a60eccee ("clk: Convert __clk_get_flags() to
clk_hw_get_flags()"), which shows how clk_hw_get_flags can easily
be used instead.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1596272022-14173-1-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Two things aren't documented causing kernel-doc to fail when checking
the core clk.c file. Fix them so that this file is clean.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200622090935.213833-1-sboyd@kernel.org
|
|
For test and debug purposes, it's simple enough to enable or disable
clocks from shell. Add a new debugfs file 'clk_prepare_enable' that
calls clk_prepare_enable() when writing "1" and clk_disable_unprepare()
when writing "0".
This can have security implications, so only support it when the code
has been modified to #define CLOCK_ALLOW_WRITE_DEBUGFS.
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20200630003024.6282-1-mdtipton@codeaurora.org
[sboyd@kernel.org: Reword commit text and remove comment update]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Information about usage and prerequisites for this API.
Signed-off-by: Sarang Mairal <sarangmairal@gmail.com>
Link: https://lore.kernel.org/r/20200611021941.786-2-sarangmairal@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This time around we have four lines of diff in the core framework,
removing a function that isn't used anymore. Otherwise the main new
thing for the common clk framework is that it is selectable in the
Kconfig language now. Hopefully this will let clk drivers and clk
consumers be testable on more than the architectures that support the
clk framework. The goal is to introduce some Kunit tests for the
framework.
Outside of the core framework we have the usual set of various driver
updates and non-critical fixes. The dirstat shows that the new
Baikal-T1 driver is the largest addition this time around in terms of
lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
drivers introduce many lines to support new or upcoming SoCs. After
that the dirstat shows the usual suspects working on their SoC support
by fixing minor bugs, correcting data and converting some of their DT
bindings to YAML.
Core:
- Allow the COMMON_CLK config to be selectable
New Drivers:
- Clk driver for Baikal-T1 SoCs
- Mediatek MT6765 clock support
- Support for Intel Agilex clks
- Add support for X1830 and X1000 Ingenic SoC clk controllers
- Add support for the new Renesas RZ/G1H (R8A7742) SoC
- Add support for Qualcomm's MSM8939 Generic Clock Controller
Updates:
- Support IDT VersaClock 5P49V5925
- Bunch of updates for HSDK clock generation unit (CGU) driver
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
- Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
- Enable supply regulators for GPU gdscs on Qualcomm SoCs
- Add support for Si5342, Si5344 and Si5345 chips
- Support custom flags in Xilinx zynq firmware
- Various small fixes to the Xilinx clk driver
- A single minor rounding fix for the legacy Allwinner clock support
- A few patches from Abel Vesa as preparation of adding audiomix
clock support on i.MX
- A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
clk-pllv3 drivers
- Drop dependency on ARM64 for i.MX8M clock driver, to support
aarch32 mode on aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using
composite clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102
defined bit rates
- A couple changes for EMC frequency scaling on Tegra210
- Support for CPU frequency scaling on Tegra20/Tegra30
- New clk gate for CSI test pattern generator on Tegra210
- Regression fixes for Samsung exynos542x and exynos5433 SoCs
- Use of fallthrough; attribute for Samsung s3c24xx
- Updates and fixup HDMI and video clocks on Meson8b
- Fixup reset polarity on Meson8b
- Fix GPU glitch free mux switch on Meson gx and g12
- A minor fix for the currently unused suspend/resume handling on
Renesas RZ/A1 and RZ/A2
- Two more conversions of Renesas DT bindings to json-schema
- Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
clk: mediatek: Remove ifr{0,1}_cfg_regs structures
clk: baikal-t1: remove redundant assignment to variable 'divider'
clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
dt-bindings: clock: Add a missing include to MMP Audio Clock binding
dt: Add bindings for IDT VersaClock 5P49V5925
clk: vc5: Add support for IDT VersaClock 5P49V6965
clk: Add Baikal-T1 CCU Dividers driver
clk: Add Baikal-T1 CCU PLLs driver
dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
clk: mediatek: assign the initial value to clk_init_data of mtk_mux
clk: mediatek: Add MT6765 clock support
clk: mediatek: add mt6765 clock IDs
dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
CLK: HSDK: CGU: add support for 148.5MHz clock
CLK: HSDK: CGU: support PLL bypassing
CLK: HSDK: CGU: check if PLL is bypassed first
clk: clk-si5341: Add support for the Si5345 series
...
|
|
clk_pm_runtime_get() assumes that the PM-runtime usage counter will
be dropped by pm_runtime_get_sync() on errors, which is not the case,
so PM-runtime references to devices acquired by the former are leaked
on errors returned by the latter.
Fix this by modifying clk_pm_runtime_get() to drop the reference if
pm_runtime_get_sync() returns an error.
Fixes: 9a34b45397e5 clk: Add support for runtime PM
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There's no callers in-tree anymore.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lkml.kernel.org/r/20200505083001.52564-1-yuehaibing@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
On failing to prepare or enable a clock, remove the core structure
from the list it has been inserted as it is about to be freed.
This otherwise leads to random crashes when subsequent clocks get
registered, during which parsing of the clock tree becomes adventurous.
Observed with QEMU's RPi-3 emulation.
Fixes: 12ead77432f2 ("clk: Don't try to enable critical clocks if prepare failed")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Link: https://lkml.kernel.org/r/20200505140953.409430-1-maz@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's not much to see in the core framework this time around.
Instead the majority of the diff is the normal collection of driver
additions for new SoCs and non-critical clk data fixes and updates.
The framework must be middle aged.
The two biggest directories in the diffstat show that the Qualcomm and
Unisoc support added a handful of big drivers for new SoCs but that's
not really the whole story because those new drivers tend to add large
numbers of lines of clk data. There's a handful of AT91 clk drivers
added this time around too and a bunch of improvements to drivers like
the i.MX driver. All around lots of updates and fixes in various clk
drivers which is good to see.
The core framework has only one real major change which has been
baking in next for the past couple months. It fixes the framework so
that it stops caching a clk's phase when the phase clk_op returns an
error. Before this change we would consider some negative errno as a
phase and that just doesn't make sense.
Core:
- Don't show clk phase when it is invalid
New Drivers:
- Add support for Unisoc SC9863A clks
- Qualcomm SM8250 RPMh and MSM8976 RPM clks
- Qualcomm SM8250 Global Clock Controller (GCC) support
- Qualcomm SC7180 Modem Clock Controller (MSS CC) support
- EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs
- Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and
at91sam9g45 SoCs
Updates:
- GPU GX GDSC support on Qualcomm sc7180
- Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers
- A series from Anson to convert i.MX8 clock bindings to json-schema
- Update i.MX pll14xx driver to include new frequency entries for
pll1443x table, and return error for invalid PLL type
- Add missing of_node_put() call for a number of i.MX clock drivers
- Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already
have the flag on its child cpu clock
- Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL
via CORE_SEL slice, and source from A53 CCM clk root when we need
to change ARM PLL frequency. Thus, we can support core running
above 1GHz safely
- Update i.MX pfdv2 driver to check zero rate and use determine_rate
for getting the best rate
- Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for
imx7d
- Remove PMC clks from Tegra clk driver
- Improved clock/reset handling for the Renesas R-Car USB2 Clock
Selector
- Conversion to json-schema of the Renesas CPG/MSSR DT bindings
- Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and
M3-N
- Update Amlogic audio clock gate hierarchy for meson8 and gxbb
- Update Amlogic g12a spicc clock sources
- Support for Ingenic X1000 TCU clks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (146 commits)
clk: sprd: fix to get a correct ibias of pll
dt-bindings: imx8mm-clock: Fix the file path
dt-bindings: imx8mq-clock: Fix the file path
clk: qcom: rpmh: Drop unnecessary semicolons
clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd()
clk: tegra: Use NULL for pointer initialization
clk: sprd: add clocks support for SC9863A
clk: sprd: support to get regmap from parent node
clk: sprd: Add macros for referencing parents without strings
clk: sprd: Add dt-bindings include file for SC9863A
dt-bindings: clk: sprd: add bindings for sc9863a clock controller
dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific
clk: sprd: add gate for pll clocks
MAINTAINERS: dt: update reference for arm-integrator.txt
clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks
clk: mmp2: Add clock for fifth SD HCI on MMP3
dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3
clk: mmp2: Add clocks for the thermal sensors
dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors
clk: mmp2: add the GPU clocks
...
|
|
and 'clk-arm-icst' into clk-next
- EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs
- Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs
- Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers
* clk-ti:
clk: keystone: Add new driver to handle syscon based clocks
dt-bindings: clock: Add binding documentation for TI EHRPWM TBCLK
* clk-ingenic:
clk: ingenic/TCU: Fix round_rate returning error
clk: ingenic/jz4770: Exit with error if CGU init failed
clk: JZ4780: Add function for enable the second core.
clk: Ingenic: Add support for TCU of X1000.
* clk-typo:
clk: Fix trivia typo in comment exlusive => exclusive
* clk-at91:
clk: at91: add at91rm9200 pmc driver
clk: at91: add at91sam9n12 pmc driver
clk: at91: add sama5d3 pmc driver
clk: at91: add at91sam9g45 pmc driver
clk: at91: usb: introduce num_parents in driver's structure
clk: at91: usb: use proper usbs_mask
clk: at91: sam9x60: fix usb clock parents
clk: at91: usb: continue if clk_hw_round_rate() return zero
clk: at91: sam9x60: Don't use audio PLL
* clk-mmp2:
clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks
clk: mmp2: Add clock for fifth SD HCI on MMP3
dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3
clk: mmp2: Add clocks for the thermal sensors
dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors
clk: mmp2: add the GPU clocks
dt-bindings: marvell,mmp2: Add clock ids for the GPU clocks
clk: mmp2: Add PLLs that are available on MMP3
dt-bindings: marvell,mmp2: Add clock ids for MMP3 PLLs
clk: mmp2: Check for MMP3
dt-bindings: clock: Add MMP3 compatible string
clk: mmp2: Stop pretending PLL outputs are constant
clk: mmp2: Add support for PLL clock sources
dt-bindings: clock: Convert marvell,mmp2-clock to json-schema
clk: mmp2: Constify some strings
clk: mmp2: Remove a unused prototype
* clk-arm-icst:
MAINTAINERS: dt: update reference for arm-integrator.txt
clk: versatile: Add device tree probing for IM-PD1 clocks
clk: versatile: Export icst_clk_setup()
dt-bindings: clock: Create YAML schema for ICST clocks
|
|
'clk-allwinner' into clk-next
- Don't show clk phase when it is invalid
* clk-phase-errors:
clk: rockchip: fix mmc get phase
clk: Fix phase init check
clk: Bail out when calculating phase fails during clk registration
clk: Move rate and accuracy recalc to mostly consumer APIs
clk: Use 'parent' to shorten lines in __clk_core_init()
clk: Don't cache errors from clk_ops::get_phase()
* clk-amlogic:
clk: meson: meson8b: set audio output clock hierarchy
clk: meson: g12a: add support for the SPICC SCLK Source clocks
dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs
clk: meson: gxbb: set audio output clock hierarchy
clk: meson: gxbb: add the gxl internal dac gate
dt-bindings: clk: meson: add the gxl internal dac gate
* clk-renesas:
dt-bindings: clock: renesas: cpg-mssr: Convert to json-schema
clk: renesas: rcar-usb2-clock-sel: Add reset_control
clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties
dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
clk: renesas: Remove use of ARCH_R8A7795
clk: renesas: r8a77965: Add RPC clocks
clk: renesas: r8a7796: Add RPC clocks
clk: renesas: r8a7795: Add RPC clocks
clk: renesas: rcar-gen3: Add CCREE clocks
* clk-allwinner:
clk: sunxi-ng: sun8i-de2: Sort structures
clk: sunxi-ng: sun8i-de2: Add R40 specific quirks
clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A83T
clk: sunxi-ng: sun8i-de2: Don't reuse A83T resets
clk: sunxi-ng: sun8i-de2: H6 doesn't have rotate core
clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A64
clk: sunxi-ng: sun8i-de2: Split out H5 definitions
clk: sunxi-ng: a64: Export MBUS clock
|
|
Fix trivia typo in comment exlusive => exclusive.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lkml.kernel.org/r/20200310135507.87959-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Commit 2760878662a2 ("clk: Bail out when calculating phase fails during
clk registration") introduced a check on error values at the time the
clock is registered to bail out when such an error occurs. However, it
doesn't check whether the returned value is positive which will happen
if the driver returns a non-zero phase. Since a phase is usually a
non-zero positive number this ends up returning something that isn't 0
to the caller of __clk_core_init(), making most clks fail to register
if they implement a phase clk op and return anything besides 0 for the
phase.
Fix this by returning the error if phase is less than zero or just
return zero if the phase is a positive number.
Fixes: 2760878662a2 ("clk: Bail out when calculating phase fails during clk registration")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lkml.kernel.org/r/20200225134248.919889-1-maxime@cerno.tech
Reported-by: "kernelci.org bot" <bot@kernelci.org>
[sboyd@kernel.org: Reword commit text to provide clarity]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The second line of the of_clk_detect_critical() function signature is
not indented according to coding style.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/20191206133414.23925-1-geert+renesas@glider.be
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Bail out of clk registration if we fail to get the phase for a clk that
has a clk_ops::get_phase() callback. Print a warning too so that driver
authors can easily figure out that some clk is unable to read back phase
information at boot.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-5-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
There's some confusion about when recalc is done for the rate and
accuracy clk consumer APIs in relation to the prepare lock being taken.
Oddly enough, we take the lock again in debugfs APIs so that we can call
the internal "clk_core" APIs to get these fields with any necessary
recalculations. Instead of having this confusion, let's introduce a
recalc variant of these two consumer APIs as internal helpers and call
them from the consumer APIs and the debugfs code so that we don't take
the lock more than once.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-4-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Some lines are getting long in this function. Let's move 'parent' up to
the top of the function and use it in many places whenever there is a
parent for a clk. This shortens some lines by avoiding core->parent->
indirections.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-3-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
We don't check for errors from clk_ops::get_phase() before storing away
the result into the clk_core::phase member. This can lead to some fairly
confusing debugfs information if these ops do return an error. Let's
skip the store when this op fails to fix this. While we're here, move
the locking outside of clk_core_get_phase() to simplify callers from
the debugfs side.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-2-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
of_clk_get_parent_count() and of_clk_get_parent_name() never modify the
device nodes passed, so they can be const.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/20200212094317.1150-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Merge more updates from Andrew Morton:
"The rest of MM and the rest of everything else: hotfixes, ipc, misc,
procfs, lib, cleanups, arm"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits)
ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
treewide: remove redundant IS_ERR() before error code check
include/linux/cpumask.h: don't calculate length of the input string
lib: new testcases for bitmap_parse{_user}
lib: rework bitmap_parse()
lib: make bitmap_parse_user a wrapper on bitmap_parse
lib: add test for bitmap_parse()
bitops: more BITS_TO_* macros
lib/string: add strnchrnul()
proc: convert everything to "struct proc_ops"
proc: decouple proc from VFS with "struct proc_ops"
asm-generic/tlb: provide MMU_GATHER_TABLE_FREE
asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER
asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE
asm-generic/tlb: rename HAVE_RCU_TABLE_FREE
asm-generic/tlb: add missing CONFIG symbol
asm-gemeric/tlb: remove stray function declarations
asm-generic/tlb: avoid potential double flush
mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
...
|
|
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p).
Hence, IS_ERR(p) is unneeded.
The semantic patch that generates this commit is as follows:
// <smpl>
@@
expression ptr;
constant error_code;
@@
-IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code)
+PTR_ERR(ptr) == - error_code
// </smpl>
Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c]
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO]
Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c]
Acked-by: Rob Herring <robh@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'clk-amlogic' and 'clk-allwinner' into clk-next
- Support dangerous debugfs actions on clks with dead code
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs
* clk-debugfs-danger:
clk: Add support for setting clk_rate via debugfs
* clk-basic-hw:
clk: divider: Add support for specifying parents via DT/pointers
clk: gate: Add support for specifying parents via DT/pointers
clk: mux: Add support for specifying parents via DT/pointers
clk: asm9260: Use parent accuracy in fixed rate clk
clk: fixed-rate: Document that accuracy isn't a rate
clk: fixed-rate: Add clk flags for parent accuracy
clk: fixed-rate: Add support for specifying parents via DT/pointers
clk: fixed-rate: Document accuracy member
clk: fixed-rate: Move to_clk_fixed_rate() to C file
clk: fixed-rate: Remove clk_register_fixed_rate_with_accuracy()
clk: fixed-rate: Convert to clk_hw based APIs
clk: gpio: Use DT way of specifying parents
* clk-renesas:
clk: renesas: Prepare for split of R-Car H3 config symbol
dt-bindings: clock: renesas: cpg-mssr: Fix r8a774b1 typo
clk: renesas: r7s9210: Add SPIBSC clock
clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks
clk: renesas: Remove use of ARCH_R8A7796
clk: renesas: rcar-gen2: Change multipliers and dividers to u8
* clk-amlogic:
clk: clarify that clk_set_rate() does updates from top to bottom
clk: meson: meson8b: make the CCF use the glitch-free mali mux
clk: meson: pll: Fix by 0 division in __pll_params_to_rate()
clk: meson: g12a: fix missing uart2 in regmap table
clk: meson: meson8b: use of_clk_hw_register to register the clocks
clk: meson: meson8b: don't register the XTAL clock when provided via OF
clk: meson: meson8b: change references to the XTAL clock to use [fw_]name
clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier
clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller
dt-bindings: clock: meson8b: add the clock inputs
dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding
* clk-allwinner:
clk: sunxi: a23/a33: Export the MIPI PLL
clk: sunxi: a31: Export the MIPI PLL
clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS
clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock
clk: sunxi-ng: r40: Export MBUS clock
clk: sunxi: use of_device_get_match_data
|
|
'clk-kconfig' and 'clk-at91' into clk-next
- Warn about critical clks that fail to enable or prepare
- Detect more PRMCU variants in ux500 driver
* clk-uniphier:
clk: uniphier: Add SCSSI clock gate for each channel
* clk-warn-critical:
clk: Warn about critical clks that fail to enable
clk: Don't try to enable critical clocks if prepare failed
clk: tegra: Fix double-free in tegra_clk_init()
clk: samsung: exynos5420: Keep top G3D clocks enabled
clk: qcom: Avoid SMMU/cx gdsc corner cases
clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs
clk: Move clk_core_reparent_orphans() under CONFIG_OF
clk: at91: fix possible deadlock
clk: walk orphan list on clock provider registration
clk: imx: pll14xx: fix clk_pll14xx_wait_lock
clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table
clk: imx: clk-composite-8m: add lock to gate/mux
* clk-ux500:
clk: ux500: Fix up the SGA clock for some variants
* clk-kconfig:
clk: Fix Kconfig indentation
* clk-at91:
clk: at91: sam9x60: fix programmable clock prescaler
clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default value
|
|
'clk-register-dt-node-better' into clk-next
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
* clk-init-allocation:
clk: add terminate callback to clk_ops
clk: let init callback return an error code
clk: actually call the clock init before any other callback of the clock
* clk-unused:
clk: bm1800: Remove set but not used variable 'fref'
* clk-register-dt-node-better:
clk: Use parent node pointer during registration if necessary
|
|
For testing, it is useful to be able to specify a clock rate manually.
As this is a dangerous feature, it is not enabled by default.
Users need to modify the source directly and #define
CLOCK_ALLOW_WRITE_DEBUGFS.
This follows the spirit of commit 09c6ecd394105c48 ("regmap: Add support
for writing to regmap registers via debugfs").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/20190828132306.19012-1-geert+renesas@glider.be
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
If we don't warn here users of the CLK_IS_CRITICAL flag may not know
that their clk isn't actually enabled because it silently fails to
enable. Let's print a warning in that case so developers find these
problems faster.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200102005503.71923-1-sboyd@kernel.org
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
Sometimes clk drivers are attached to devices which are children of a
parent device that is connected to a node in DT. This happens when
devices are MFD-ish and the parent device driver mostly registers child
devices to match against drivers placed in their respective subsystem
directories like drivers/clk, drivers/regulator, etc. When the clk
driver calls clk_register() with a device pointer, that struct device
pointer won't have a device_node associated with it because it was
created purely in software as a way to partition logic to a subsystem.
This causes problems for the way we find parent clks for the clks
registered by these child devices because we look at the registering
device's device_node pointer to lookup 'clocks' and 'clock-names'
properties. Let's use the parent device's device_node pointer if the
registering device doesn't have a device_node but the parent does. This
simplifies clk registration code by avoiding the need to assign some
device_node to the device registering the clk.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20191230190455.141339-1-sboyd@kernel.org
[sboyd@kernel.org: Fixup kernel-doc notation]
Reviewed-by: Niklas Cassel <nks@flawful.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The following traceback is seen if a critical clock fails to prepare.
bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL
------------[ cut here ]------------
Enabling unprepared plld_per
WARNING: CPU: 1 PID: 1 at drivers/clk/clk.c:1014 clk_core_enable+0xcc/0x2c0
...
Call trace:
clk_core_enable+0xcc/0x2c0
__clk_register+0x5c4/0x788
devm_clk_hw_register+0x4c/0xb0
bcm2835_register_pll_divider+0xc0/0x150
bcm2835_clk_probe+0x134/0x1e8
platform_drv_probe+0x50/0xa0
really_probe+0xd4/0x308
driver_probe_device+0x54/0xe8
device_driver_attach+0x6c/0x78
__driver_attach+0x54/0xd8
...
Check return values from clk_core_prepare() and clk_core_enable() and
bail out if any of those functions returns an error.
Cc: Jerome Brunet <jbrunet@baylibre.com>
Fixes: 99652a469df1 ("clk: migrate the count of orphaned clocks at init")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20191225163429.29694-1-linux@roeck-us.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a terminate callback to the clk_ops to release the resources
claimed in .init()
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190924123954.31561-4-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
If the init callback is allowed to request resources, it needs a return
value to report the outcome of such a request.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190924123954.31561-3-jbrunet@baylibre.com
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
__clk_init_parent() will call the .get_parent() callback of the clock
so .init() must run before.
Fixes: 541debae0adf ("clk: call the clock init() callback before any other ops callback")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20190924123954.31561-2-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
A recent addition exposed a helper that is only used for CONFIG_OF. Move
it into the CONFIG_OF zone in this file to make the compiler stop
warning about an unused function.
Fixes: 66d9506440bb ("clk: walk orphan list on clock provider registration")
Signed-off-by: Olof Johansson <olof@lixom.net>
Link: https://lkml.kernel.org/r/20191217082501.424892072D@mail.kernel.org
[sboyd@kernel.org: "Simply" move the function instead]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
So far, we walked the orphan list every time a new clock was registered
in CCF. This was fine since the clocks were only referenced by name.
Now that the clock can be referenced through DT, it is not enough:
* Controller A register first a reference clocks from controller B
through DT.
* Controller B register all its clocks then register the provider.
Each time controller B registers a new clock, the orphan list is walked
but it can't match since the provider is registered yet. When the
provider is finally registered, the orphan list is not walked unless
another clock is registered afterward.
This can lead to situation where some clocks remain orphaned even if
the parent is available.
Walking the orphan list on provider registration solves the problem.
Reported-by: Jian Hu <jian.hu@amlogic.com>
Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
into clk-next
- Support CGU in Ingenix X1000
- Support Bitmain BM1880 clks
* clk-ingenic:
clk: ingenic: Allow drivers to be built with COMPILE_TEST
clk: Ingenic: Add CGU driver for X1000.
dt-bindings: clock: Add X1000 bindings.
* clk-init-leak:
clk: mark clk_disable_unused() as __init
clk: Fix memory leak in clk_unregister()
* clk-ux500:
MAINTAINERS: Update section for Ux500 clock drivers
* clk-bitmain:
MAINTAINERS: Add entry for BM1880 SoC clock driver
clk: Add common clock driver for BM1880 SoC
dt-bindings: clock: Add devicetree binding for BM1880 SoC
clk: Add clk_hw_unregister_composite helper function definition
clk: Zero init clk_init_data in helpers
|
|
clk_disable_unused is only called once, as a late_initcall, so reclaim
a bit of memory by marking it (and the functions and data it is the
sole user of) as __init/__initdata. This moves ~1900 bytes from .text
to .init.text for a imx_v6_v7_defconfig.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lkml.kernel.org/r/20191004094826.8320-1-linux@rasmusvillemoes.dk
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Memory allocated in alloc_clk() for 'struct clk' and
'const char *con_id' while invoking clk_register() is never freed
in clk_unregister(), resulting in kmemleak showing the following
backtrace.
backtrace:
[<00000000546f5dd0>] kmem_cache_alloc+0x18c/0x270
[<0000000073a32862>] alloc_clk+0x30/0x70
[<0000000082942480>] __clk_register+0xc8/0x760
[<000000005c859fca>] devm_clk_register+0x54/0xb0
[<00000000868834a8>] 0xffff800008c60950
[<00000000d5a80534>] platform_drv_probe+0x50/0xa0
[<000000001b3889fc>] really_probe+0x108/0x348
[<00000000953fa60a>] driver_probe_device+0x58/0x100
[<0000000008acc17c>] device_driver_attach+0x6c/0x90
[<0000000022813df3>] __driver_attach+0x84/0xc8
[<00000000448d5443>] bus_for_each_dev+0x74/0xc8
[<00000000294aa93f>] driver_attach+0x20/0x28
[<00000000e5e52626>] bus_add_driver+0x148/0x1f0
[<000000001de21efc>] driver_register+0x60/0x110
[<00000000af07c068>] __platform_driver_register+0x40/0x48
[<0000000060fa80ee>] 0xffff800008c66020
Fix it here.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lkml.kernel.org/r/20191022071153.21118-1-kishon@ti.com
Fixes: 1df4046a93e0 ("clk: Combine __clk_get() and __clk_create_clk()")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This patch adds a new clk_hw_get_parent_index() function that can be
used to retrieve the index of a given clock's parent. This can be useful
for restoring a clock on system resume.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have a small collection of core framework updates this time, mostly
around clk registration by clk providers and debugfs "nice to haves"
for rate constraints. I'll highlight that we're now setting the
clk_init_data pointer inside struct clk_hw to NULL during
clk_register(), which may break some drivers that thought they could
use that pointer during normal operations. That change has been
sitting in next for a while now but maybe something is still broken.
We'l see. Other than that the core framework changes aren't invasive
and they're fixing bugs, simplifying, and making things better.
On the clk driver side we got the usual addition of new SoC support,
new features for existing drivers, and bug fixes scattered throughout.
The biggest diffstat is the Amlogic driver that gained CPU clk support
in addition to migrating to the new way of specifying clk parents.
After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got
support for various new SoCs and clock controllers from those vendors.
Core:
- Drop NULL checks in clk debugfs
- Add min/max rates to clk debugfs
- Set clk_init_data pointer inside clk_hw to NULL after registration
- Make clk_bulk_get_all() return an 'id' corresponding to clock-names
- Evict parents from parent cache when they're unregistered
New Drivers:
- Add clock driver for i.MX8MN SoCs
- Support aspeed AST2600 SoCs
- Support for Mediatek MT6779 SoCs
- Support qcom SM8150 GCC and RPMh clks
- Support qcom QCS404 WCSS clks
- Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807)
- Addition of clock driver for Rockchip rk3308 SoCs
Updates:
- Add regulator support to the cdce925 clk driver
- Add support for Raspberry Pi 4 bcm2711 SoCs
- Add SDIO gate support to aspeed driver
- Add missing of_node_put() calls in various clk drivers
- Migrate Amlogic driver to new clock parent description method
- Add DVFS support to Amlogic Meson g12
- Add Amlogic Meson g12a reset support to the axg audio clock controller
- Add sm1 support to the Amlogic Meson g12a clock controller
- Switch i.MX8MM clock driver to platform driver
- Add Hifi4 DSP related clocks for i.MX8QXP SoC
- Fix Audio PLL setting and parent clock for USB
- Misc i.MX8 clock driver improvements and corrections
- Set floor ops for Qualcomm SD clks so that rounding works
- Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1
- Enable the Allwinner V3 SoC and fix the i2s clock for H6"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
clk: Drop !clk checks in debugfs dumping
clk: imx: imx8mn: fix pll mux bit
clk: imx: imx8mm: fix pll mux bit
clk: imx: clk-pll14xx: unbypass PLL by default
clk: imx: pll14xx: avoid glitch when set rate
clk: mvebu: ap80x: add AP807 clock support
clk: mvebu: ap806: Prepare the introduction of AP807 clock support
clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver
clk: mvebu: ap806: be more explicit on what SaR is
clk: mvebu: ap80x-cpu: add AP807 CPU clock support
clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock
dt-bindings: ap806: Document AP807 clock compatible
dt-bindings: ap80x: Document AP807 CPU clock compatible
clk: sprd: add missing kfree
clk: at91: allow 24 Mhz clock as input for PLL
clk: Make clk_bulk_get_all() return a valid "id"
clk: actions: Fix factor clk struct member access
clk: qcom: rcg: Return failure for RCG update
clk: remove extra ---help--- tags in Kconfig
clk: add include guard to clk-conf.h
...
|
|
'clk-actions' into clk-next
- Add regulator support to the cdce925 clk driver
- Add support for Raspberry Pi 4 bcm2711 SoCs
- Evict parents from parent cache when they're unregistered
* clk-cdce-regulator:
clk: clk-cdce925: Add regulator support
dt-bindings: clock: cdce925: Add regulator documentation
* clk-bcm:
clk: bcm2835: Mark PLLD_PER as CRITICAL
clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
clk: bcm2835: Introduce SoC specific clock registration
dt-bindings: bcm2835-cprman: Add bcm2711 support
* clk-evict-parent-cache:
clk: Evict unregistered clks from parent caches
* clk-actions:
clk: actions: Fix factor clk struct member access
|
|
into clk-next
- Set clk_init_data pointer inside clk_hw to NULL after registration
* clk-init-destroy:
clk: Overwrite clk_hw::init with NULL during clk_register()
clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered
clk: ti: Don't reference clk_init_data after registration
clk: qcom: Remove error prints from DFS registration
rtc: sun6i: Don't reference clk_init_data after registration
clk: zx296718: Don't reference clk_init_data after registration
clk: milbeaut: Don't reference clk_init_data after registration
clk: socfpga: deindent code to proper indentation
phy: ti: am654-serdes: Don't reference clk_init_data after registration
clk: sprd: Don't reference clk_init_data after registration
clk: socfpga: Don't reference clk_init_data after registration
clk: sirf: Don't reference clk_init_data after registration
clk: qcom: Don't reference clk_init_data after registration
clk: meson: axg-audio: Don't reference clk_init_data after registration
clk: lochnagar: Don't reference clk_init_data after registration
clk: actions: Don't reference clk_init_data after registration
* clk-doc:
clk: remove extra ---help--- tags in Kconfig
clk: add include guard to clk-conf.h
clk: Document of_parse_clkspec() some more
clk: Remove extraneous 'for' word in comments
* clk-imx: (32 commits)
clk: imx: imx8mn: fix pll mux bit
clk: imx: imx8mm: fix pll mux bit
clk: imx: clk-pll14xx: unbypass PLL by default
clk: imx: pll14xx: avoid glitch when set rate
clk: imx: imx8mn: fix audio pll setting
clk: imx8mn: Add necessary frequency support for ARM PLL table
clk: imx8mn: Add missing rate_count assignment for each PLL structure
clk: imx8mn: fix int pll clk gate
clk: imx8mn: Add GIC clock
clk: imx8mn: Fix incorrect parents
clk: imx8mm: Fix incorrect parents
clk: imx8mq: Fix sys3 pll references
clk: imx8mq: Unregister clks when of_clk_add_provider failed
clk: imx8mm: Unregister clks when of_clk_add_provider failed
clk: imx8mq: Mark AHB clock as critical
clk: imx8mn: Keep uart clocks on for early console
clk: imx: Remove unused function statement
clk: imx7ulp: Make sure earlycon's clock is enabled
clk: imx8mm: Switch to platform driver
clk: imx: imx8mm: fix audio pll setting
...
* clk-allwinner:
clk: sunxi-ng: h6: Allow I2S to change parent rate
clk: sunxi-ng: v3s: add Allwinner V3 support
clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks
dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU
clk: sunxi-ng: v3s: add the missing PLL_DDR1
|
|
'clk-meson' into clk-next
- Support qcom SM8150 RPMh clks
- Set floor ops for qcom sd clks
- Support qcom QCS404 WCSS clks
- Support for Mediatek MT6779 SoCs
- Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807)
* clk-qcom:
clk: qcom: rcg: Return failure for RCG update
clk: qcom: fix QCS404 TuringCC regmap
clk: qcom: clk-rpmh: Add support for SM8150
dt-bindings: clock: Document SM8150 rpmh-clock compatible
clk: qcom: clk-rpmh: Convert to parent data scheme
dt-bindings: clock: Document the parent clocks
clk: qcom: gcc: Use floor ops for SDCC clocks
clk: qcom: gcc-qcs404: Use floor ops for sdcc clks
clk: qcom: gcc-sdm845: Use floor ops for sdcc clks
clk: qcom: define probe by index API as common API
clk: qcom: Add WCSS gcc clock control for QCS404
clk: qcom: msm8916: Don't build by default
clk: qcom: gcc: Add global clock controller driver for SM8150
dt-bindings: clock: Document gcc bindings for SM8150
clk: qcom: clk-alpha-pll: Add support for Trion PLLs
clk: qcom: clk-alpha-pll: Remove post_div_table checks
clk: qcom: clk-alpha-pll: Remove unnecessary cast
* clk-mtk:
clk: mediatek: Runtime PM support for MT8183 mcucfg clock provider
clk: mediatek: Register clock gate with device
clk: mediatek: add pericfg clocks for MT8183
dt-bindings: clock: mediatek: add pericfg for MT8183
clk: mediatek: Add MT6779 clock support
clk: mediatek: Add dt-bindings for MT6779 clocks
dt-bindings: mediatek: bindings for MT6779 clk
clk: reset: Modify reset-controller driver
* clk-armada:
clk: mvebu: ap80x: add AP807 clock support
clk: mvebu: ap806: Prepare the introduction of AP807 clock support
clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver
clk: mvebu: ap806: be more explicit on what SaR is
clk: mvebu: ap80x-cpu: add AP807 CPU clock support
clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock
dt-bindings: ap806: Document AP807 clock compatible
dt-bindings: ap80x: Document AP807 CPU clock compatible
clk: mvebu: ap806: Fix clock name for the cluster
clk: mvebu: add CPU clock driver for Armada 7K/8K
clk: mvebu: add helper file for Armada AP and CP clocks
dt-bindings: ap806: add the cluster clock node in the syscon file
* clk-ingenic:
clk: ingenic: Use CLK_OF_DECLARE_DRIVER macro
clk: ingenic/jz4740: Fix "pll half" divider not read/written properly
* clk-meson: (23 commits)
clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks
clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock
clk: meson: g12a: add support for SM1 GP1 PLL
dt-bindings: clk: meson: add sm1 periph clock controller bindings
clk: meson: axg-audio: add g12a reset support
dt-bindings: clock: meson: add resets to the audio clock controller
clk: meson: g12a: expose CPUB clock ID for G12B
clk: meson: g12a: add notifiers to handle cpu clock change
clk: meson: add g12a cpu dynamic divider driver
clk: core: introduce clk_hw_set_parent()
clk: meson: remove clk input helper
clk: meson: remove ee input bypass clocks
clk: meson: clk-regmap: migrate to new parent description method
clk: meson: meson8b: migrate to the new parent description method
clk: meson: axg: migrate to the new parent description method
clk: meson: gxbb: migrate to the new parent description method
clk: meson: g12a: migrate to the new parent description method
clk: meson: remove ao input bypass clocks
clk: meson: axg-aoclk: migrate to the new parent description method
clk: meson: gxbb-aoclk: migrate to the new parent description method
...
|
|
These recursive functions have checks for !clk being passed in, but the
callers are always looping through lists and therefore the pointers
can't be NULL. Drop the checks to simplify the code.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190826234729.145593-1-sboyd@kernel.org
|
|
We leave a dangling pointer in each clk_core::parents array that has an
unregistered clk as a potential parent when that clk_core pointer is
freed by clk{_hw}_unregister(). It is impossible for the true parent of
a clk to be set with clk_set_parent() once the dangling pointer is left
in the cache because we compare parent pointers in
clk_fetch_parent_index() instead of checking for a matching clk name or
clk_hw pointer.
Before commit ede77858473a ("clk: Remove global clk traversal on fetch
parent index"), we would check clk_hw pointers, which has a higher
chance of being the same between registration and unregistration, but it
can still be allocated and freed by the clk provider. In fact, this has
been a long standing problem since commit da0f0b2c3ad2 ("clk: Correct
lookup logic in clk_fetch_parent_index()") where we stopped trying to
compare clk names and skipped over entries in the cache that weren't
NULL.
There are good (performance) reasons to not do the global tree lookup in
cases where the cache holds dangling pointers to parents that have been
unregistered. Let's take the performance hit on the uncommon
registration path instead. Loop through all the clk_core::parents arrays
when a clk is unregistered and set the entry to NULL when the parent
cache entry and clk being unregistered are the same pointer. This will
fix this problem and avoid the overhead for the "normal" case.
Based on a patch by Bjorn Andersson.
Fixes: da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
|
|
Pull ARM DT updates from Arnd Bergmann:
"This is another huge branch with close to 450 changessets related to
devicetree files, roughly half of this for 32-bit and 64-bit
respectively. There are lots of cleanups and additional hardware
support for platforms we already support based on SoCs from Renesas,
ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
other manufacturers.
A total of 6 new SoCs and 37 new boards gets added this time, one more
SoC will come in a follow-up branch. Most of the new boards are for
64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
Going more into details for SoC platforms with new hardware support:
- The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
platform, usually paired with an external 5G modem. So far we only
support the Qualcomm SM8150 MTP reference platform, but no actual
products.
- For the slightly older Qualcomm platforms, support for several
interesting products is getting added: Three laptops based on
Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
and several phones based on the older Snapdragon 410/MSM8916
(Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
aka Wileyfox Swift).
- Mediatek MT7629 is a new wireless network router chip, similar to
the older MT7623. It gets added together with the reference board
implementation.
- Allwinner V3 is a repackaged version of the existing low-end V3s
chip, and is used in the tiny Lichee Pi Zero plus, also added here.
There is also a new TV set-top box based on Allwinner H6, the Tanix
TX6, and the eMMC variant of the Olimex A64-Olinuxino development
board.
- NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
family, similar to the i.MX8M Mini. As usual, there is a large
number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
SolidRun Hummingboard Pulse baseboard and System-on-Module,
Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
Innovations i.MX7 RMU2 board.
- In a different NXP product line, the Layerscape LS1046A "Freeway"
reference board gets added.
- Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
their set-top-box line and smart speaker with newer CPU and GPU
cores compared to their predecessors. Both are now also supported
by the Khadas VIM3 development board series, and the dts files for
that get reorganized a bit to better deal with all variants.
Another board based on SM1 that gets added is the SEI Robotics
SEI610.
- There are a handful of new x86 and Power9 server boards using
Aspeed BMC chips that are gaining support for running Linux on the
BMC through the OpenBMC project: Facebook
Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
these are still new machines using SoCs based on the ARM9 and ARM11
CPU cores, as support for the new Cortex-A7 based AST2600 is still
ramping up.
- There are three new end-user products using 32-bit Rockchips SoCs:
Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
low-end RK3229 chip, while the two AOpen products Chromebox Mini
(Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
commercial settings(digital signage, PoS, ...).
- One more single-board computer based on the popular 64-bit RK3399
is added: the Leez RK3399 P710"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
arm64: dts: qcom: Add Lenovo Yoga C630
ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
ARM; dts: aspeed: mihawk: File should not be executable
ARM: dts: aspeed: swift: Change power supplies to version 2
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed-g4: Add all flash chips
ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
ARM: dts: exynos: Remove not accurate secondary ADC compatible
arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
arm64: dts: meson-sm1-sei610: add stdout-path property back
arm64: dts: meson-sm1-sei610: enable DVFS
arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
arm64: dts: meson: g12a: add reset to tdm formatters
...
|
|
The return value of of_parse_clkspec() is peculiar. If the function is
called with a NULL argument for 'name' it will return -ENOENT, but if
it's called with a non-NULL argument for 'name' it will return -EINVAL.
This peculiarity is documented by commit 5c56dfe63b6e ("clk: Add comment
about __of_clk_get_by_name() error values").
Let's further document this function so that it's clear what the return
value is and how to use the arguments to parse clk specifiers.
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190826212042.48642-1-sboyd@kernel.org
Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com>
|
|
An extra 'for' word is grammatically incorrect in the comment
'verifying ops for multi-parent clks'. This commit removes
this extra for word.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Link: https://lkml.kernel.org/r/1566023759-7880-1-git-send-email-gupt21@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Don't compare the parent clock name with a NULL name in the
clk_parent_map. This prevents a kernel crash when passing NULL
core->parents[i].name to strcmp().
An example which triggered this is a mux clock with four parents when
each of them is referenced in the clock driver using
clk_parent_data.fw_name and then calling clk_set_parent(clk, 3rd_parent)
on this mux.
In this case the first parent is also the HW default so
core->parents[i].hw is populated when the clock is registered. Calling
clk_set_parent(clk, 3rd_parent) will then go through all parents and
skip the first parent because it's hw pointer doesn't match. For the
second parent no hw pointer is cached yet and clk_core_get(core, 1)
returns a non-matching pointer (which is correct because we are comparing
the second with the third parent). Comparing the result of
clk_core_get(core, 2) with the requested parent gives a match. However
we don't reach this point because right after the clk_core_get(core, 1)
mismatch the old code tried to !strcmp(parent->name, NULL) (where the
second argument is actually core->parents[i].name, but that was never
populated by the clock driver).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lkml.kernel.org/r/20190815223155.21384-1-martin.blumenstingl@googlemail.com
Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|