| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With W=1 and CONFIG_RISCV_NONSTANDARD_CACHE_OPS=n, GCC warns:
drivers/cache/sifive_ccache.c: In function 'sifive_ccache_init':
drivers/cache/sifive_ccache.c:293:23: warning: variable 'quirks' set but not used [-Wunused-but-set-variable]
293 | unsigned long quirks;
| ^~~~~~
This is expected, since QUIRK_NONSTANDARD_CACHE_OPS is the only quirk
still handled in this function.
Fixes: c90847bcbfb6 ("cache: sifive_ccache: Partially convert to a platform driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403311253.Z4NvIBxI-lkp@intel.com/
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Commit 8ec99b033147 ("irqchip/sifive-plic: Convert PLIC driver into a
platform driver") broke ccache initialization because the PLIC IRQ
domain is no longer available during an arch_initcall:
[ 0.087229] irq: no irq domain found for interrupt-controller@c000000 !
[ 0.087255] CCACHE: Could not request IRQ 0
Fix this by moving the IRQ handling code to a platform driver.
Fixes: 8ec99b033147 ("irqchip/sifive-plic: Convert PLIC driver into a platform driver")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
ax45mp_dma_cache_wback()
Align the end size to cache boundary size in ax45mp_dma_cache_wback()
callback likewise done in ax45mp_dma_cache_inv() callback.
Additionally return early in case of start == end.
Fixes: d34599bcd2e4 ("cache: Add L2 cache management for Andes AX45MP RISC-V core")
Reported-by: Pavel Machek <pavel@denx.de>
Link: https://lore.kernel.org/cip-dev/ZYsdKDiw7G+kxQ3m@duo.ucw.cz/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
This adds support for the StarFive JH7100 SoC which also features this
SiFive cache controller.
The JH7100 has non-coherent DMAs but predate the standard RISC-V Zicbom
exension, so instead we need to use this cache controller for
non-standard cache management operations.
Unfortunately the interrupt for uncorrected data is broken on the JH7100
and fires continuously, so add a quirk to not register a handler for it.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Move the ccache driver over to drivers/cache, out of the drivers/soc
dumping ground, to this new collection point for cache controller
drivers.
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
RISCV_NONSTANDARD_CACHE_OPS is also used for the pmem cache maintenance
helpers, which are built into the kernel unconditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231018052654.50074-2-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.
IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.
The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate
More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.
Example PMA region passes as a DT node from OpenSBI:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
