summaryrefslogtreecommitdiff
path: root/drivers/acpi/acpica/amlresrc.h
AgeCommit message (Collapse)AuthorFilesLines
2023-04-06ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible arrayKees Cook1-1/+4
ACPICA commit bfdd3446e7caf795c85c70326c137023942972c5 Similar to "Replace one-element array with flexible-array", replace the 1-element array with a proper flexible array member as defined by C99. This allows the code to operate without tripping compile-time and run- time bounds checkers (e.g. via __builtin_object_size(), -fsanitize=bounds, and/or -fstrict-flex-arrays=3). Note that the spec requires there be at least one interrupt, so use a union to keep space allocated for this. The only binary change in .text and .data sections is some rearrangement by the compiler of acpi_dm_address_common(), but appears to be harmless. Link: https://github.com/acpica/acpica/commit/bfdd3446 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-06ACPICA: add support for ClockInput resource (v6.5)Niyas Sait1-0/+17
ACPICA commit 661feab5ee01a34af95a389a18c82e79f1aba05a Link: https://github.com/acpica/acpica/commit/661feab5 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-06ACPICA: Update all copyrights/signons to 2023Bob Moore1-1/+1
ACPICA commit 25bddd1824b1e450829468a64bbdcb38074ba3d2 Copyright updates to 2023. Link: https://github.com/acpica/acpica/commit/25bddd18 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-04-13ACPICA: Update copyright notices to the year 2022Bob Moore1-1/+1
ACPICA commit 738d7b0726e6c0458ef93c0a01c0377490888d1e Affects all source modules and utility signons. Link: https://github.com/acpica/acpica/commit/738d7b07 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07ACPICA: ACPI 6.4: add CSI2Bus resource templateBob Moore1-1/+18
This commit the result of squashing the following: ACPICA commit 21a316fdaa46b3fb245a1920f3829cb05d6ced6e ACPICA commit f5506fc7dad08c2a25ef52cf836c2d67385a612c Link: https://github.com/acpica/acpica/commit/21a316fd Link: https://github.com/acpica/acpica/commit/f5506fc7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-22ACPICA: Updated all copyrights to 2021Bob Moore1-1/+1
This affects all ACPICA source code modules. ACPICA commit c570953c914437e621dd5f160f26ddf352e0d2f4 Link: https://github.com/acpica/acpica/commit/c570953c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-13ACPICA: All acpica: Update copyrights to 2020 Including tool signons.Bob Moore1-1/+1
ACPICA commit 8b9c69d0984067051ffbe8526f871448ead6a26b Link: https://github.com/acpica/acpica/commit/8b9c69d0 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-15ACPICA: All acpica: Update copyrights to 2019Bob Moore1-1/+1
ACPICA commit 62f4f98e941d86e41969bf2ab5a93b8dc94dc49e The update includes userspace tool signons. Link: https://github.com/acpica/acpica/commit/62f4f98e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18ACPICA: adding SPDX headersErik Schmauss1-36/+2
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-06ACPICA: All acpica: Update copyrights to 2018Bob Moore1-1/+1
including tool signons. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinGroupConfig() resourceMika Westerberg1-0/+21
ACPICA commit 08b83591c0db751769d61fa889f4f50f575aeffb PinGroupConfig() is analogous to PinGroupFunction() but instead of mode (muxing), it is used to apply specific fine-grained configuration to a set of referenced pins. The format of this new resource is: PinGroupConfig (Shared/Exclusive, PinConfigType, PinConfigValue, ResourceSource, ResourceSourceIndex, ResourceSourceLabel, ResourceUsage, DescriptorName, VendorData) The PinConfigType/PinConfigValue are the same used by PinConfig() resource. Here also the combination of ResourceSource and ResourceSourceLabel is used to specify the PinGroup() this resource refers to. Link: https://github.com/acpica/acpica/commit/08b83591 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinGroupFunction() resourceMika Westerberg1-0/+20
ACPICA commit bd9a745749eac7137cd23085e6bdeb322de14ea2 PinGroupFunction() is a new resource introduced with ACPI 6.2. It is used with PinGroup() to configure specific mode for a set of pins exposed by a GPIO controller. The format of the resource is: PinGroupFunction (Shared/Exclusive, FunctionNumber, ResourceSource, ResourceSourceIndex, ResourceSourceLabel, ResourceUsage, DescriptorName, VendorData) The resource_source and ResourceSourceLabel fields are used to specify the PinGroup() resource referenced by PinGroupFunction(). Device (GPIO) { Name (_CRS, ResourceTemplate () { PinGroup ("group1") {2, 3} PinGroup ("group2") {4, 5} ... }) } Device (I2C) { Name (_CRS, ResourceTemplate () { PinGroupFunction (Exclusive, 6, "^GPIO", 0, "mygroup2") }) } In the above example the PinGroupFunction() references the second PinGroup() resource (using label "mygroup2" and configures pins 4 and 5 into mode 6. Link: https://github.com/acpica/acpica/commit/bd9a7457 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinGroup() resourceMika Westerberg1-0/+18
ACPICA commit 7d928e3174fb19d7dc0066b03c30bea07c001563 ACPI 6.2 introduced a new resource that is used to declare set of pins belonging to a GPIO controller. This resource is referenced by new PinGroupFunction() and PinGroupConfig() resources using ResourceSource and ResourceLabel fields. The PinGroup() resource looks like this: PinGroup (ResourceLabel, ResourceUsage, DescriptorName, VendorData) {Pin List} This resource should be listed in _CRS under the GPIO/pincontroller device providing these pins. Link: https://github.com/acpica/acpica/commit/7d928e31 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinConfig() resourceMika Westerberg1-0/+23
ACPICA commit a06fdba686cefccd5dd5b93b52fa0f1e3f984906 ACPI 6.2 introduced a new resource that is used to specify fine-grained configuration of a pin or set of pins used by a device. The ASL syntax of this new resource looks like: PinConfig (Shared/Exclusive, PinConfigType, PinConfigValue, ResourceSource, ResourceSourceIndex, ResourceUsage, DescriptorName, Vendordata) {Pin List} PinConfigType is an integer with following accepted values: 0x00 (Default) - No configuration is applied to the pin 0x01 (Bias Pull-up) - Pin is pulled up using certain size resistor 0x02 (Bias Pull-down) - Pin is pulled down using certain size resistor 0x03 (Bias Default) - Set to default biasing 0x04 (Bias Disable) - All bias settings will be disabled 0x05 (Bias High Impedance) - Configure the pin as hi_z 0x06 (Bias Bus Hold) - Configure the pin in a weak latch state where it drives the last value on a tristate bus 0x07 (Drive Open Drain) - Configure the pin into open drain state 0x08 (Drive Open Source) - Configure the pin into open source state 0x09 (Drive Push Pull) - Configure the pin into push-pull state 0x0a (Drive Strength) - How much the pin can supply current 0x0b (Slew Rate) - Configure slew rate of the pin 0x0c (Input Debounce) - Enable input debouncer for the pin 0x0d (Input Schmitt Trigger) - Enable schmitt trigger for the pin 0x0e - 0x7f - Reserved 0x80 - 0xff - Vendor defined types The PinConfigValue depends on the type and is expressed as units suitable for that type (for example bias uses Ohms). Link: https://github.com/acpica/acpica/commit/a06fdba6 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: ACPI 6.2: Add support for PinFunction() resourceMika Westerberg1-0/+22
ACPICA commit 6bbc6357f7061f1243601adde0ea45f7a89274e0 ACPI 6.2 introduced a new resource that is used to describe how certain pins are muxed for a device. The ASL syntax of this new resource looks like below: PinFunction(Shared, PinConfig, FunctionNumber, ResourceSource, ResourceSourceIndex, ResourceUsage, DescriptorName, VendorData) {Pin List} Which is pretty similar to GpioIo()/GpioInt() resources. Teach ACPICA about this new resource. Link: https://github.com/acpica/acpica/commit/6bbc6357 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09ACPICA: Source tree: Update copyright notices to 2017Bob Moore1-1/+1
ACPICA commit 16577e5265923f4999b4d2c0addb2343b18135e1 Affects all files. Link: https://github.com/acpica/acpica/commit/16577e52 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-15ACPICA: Additional 2016 copyright changesBob Moore1-1/+1
All tool/utility signons. Dual-license module header. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05ACPICA: Update Copyright headers to 2015David E. Box1-1/+1
ACPICA commit 8990e73ab2aa15d6a0068b860ab54feff25bee36 Link: https://github.com/acpica/acpica/commit/8990e73a Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21ACPICA: iASL/Disassembler: Add support for hardware summary mapfiles.Bob Moore1-0/+34
Adds support for both iASL and the disassembler to create a hardware and connection summary mapfile (via the -lm option.) Linux isn't affected by this patch because iASL is not in the Linux upstream. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-18ACPICA: Revert "Headers: Deploy #pragma pack (push) and (pop)."Robert Moore1-4/+0
This reverts commit aae576e5faefa8ba70647efa320d4747b6375f1e. Push and Pop are not portable "enough", and caused problems for some ACPICA customers. Signed-off-by: Robert Moore <Robert.Moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-27ACPICA: Headers: Deploy #pragma pack (push) and (pop).Bob Moore1-0/+4
Use push and pop to both guarantee that the correct alignment is used, and to restore the alignment to whatever it was before the header was included. It is reported that the #pragma pack(push/pop) directives are not supported by the specific GCCs, but this patch still doesn't affect kernel build as there are already #pragma pack([1]) directives used in the old ACPICA headers, which means there shouldn't be GCCs that are currently used to compile the ACPI kernels do not support #pragma pack() directives. References: https://bugs.acpica.org/show_bug.cgi?id=1058 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11ACPICA: Update ACPICA copyrights to 2014.Bob Moore1-1/+1
Update ACPICA copyrights to 2014. Includes all source headers and signons for the various tools. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25ACPICA: Update ACPICA copyrights to 2013Bob Moore1-1/+1
Includes all source headers and signons for the various tools. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-10ACPICA: Cleanup source to reduce differences between Linux and ACPICA.Lv Zheng1-0/+6
This is a cosmetic patch only. Comparison of the resulting binary showed only line number differences. This patch does not affect the generation of the Linux binary. This patch decreases 389 lines of 20121018 divergence.diff. This patch reduces source code diff caused by the simple code maintenance work: 1. Deletion of the unused include files. 2. Deletion of the deprecated codes blocks. 3. Repositioning of the code blocks. 4. Replacing the values with the well defined macros. 5. Replacing the types with the equivalent types. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPICA: ACPICA core: Cleanup empty lines at file start and endBob Moore1-1/+0
Maintenance for source code consistency. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-07-17ACPICA: AcpiSrc: Fix some translation issues for Linux conversionBob Moore1-2/+2
Fixes issues like this: i_aSL -> iASL 00-7_f -> 00-7F local_fADT -> local_FADT execute_oSI -> execute_OSI Also, in function headers, the parameters are now translated to lower case (with underscores if necessary.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPICA: Update all copyrights to 2012Bob Moore1-1/+1
Update all copyrights to 2012. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI 5.0: Support for all new resource descriptorsLin Ming1-0/+136
FixedDMA, GPIO descriptors, SerialBus descriptors Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-18ACPICA: Update all ACPICA copyrights and signons to 2011Bob Moore1-1/+1
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-22ACPICA: Update all ACPICA copyrights and signons to 2010Bob Moore1-1/+1
Add 2010 copyright to all module headers and signons, including the Linux header. This affects virtually every file in the ACPICA core subsystem, iASL compiler, and all utilities. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-09ACPICA: hide private headersLen Brown1-0/+311
Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 08:38:50 +0000