summaryrefslogtreecommitdiff
path: root/crypto
AgeCommit message (Collapse)AuthorFilesLines
2023-06-02KEYS: asymmetric: Copy sig and digest in public_key_verify_signature()Roberto Sassu1-17/+21
Commit ac4e97abce9b8 ("scatterlist: sg_set_buf() argument must be in linear mapping") checks that both the signature and the digest reside in the linear mapping area. However, more recently commit ba14a194a434c ("fork: Add generic vmalloced stack support") made it possible to move the stack in the vmalloc area, which is not contiguous, and thus not suitable for sg_set_buf() which needs adjacent pages. Always make a copy of the signature and digest in the same buffer used to store the key and its parameters, and pass them to sg_init_one(). Prefer it to conditionally doing the copy if necessary, to keep the code simple. The buffer allocated with kmalloc() is in the linear mapping area. Cc: stable@vger.kernel.org # 4.9.x Fixes: ba14a194a434 ("fork: Add generic vmalloced stack support") Link: https://lore.kernel.org/linux-integrity/Y4pIpxbjBdajymBJ@sol.localdomain/ Suggested-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com>
2023-05-07Merge tag 'v6.4-p2' of ↵Linus Torvalds11-12/+15
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
2023-05-04Merge tag 'loongarch-6.4' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Better backtraces for humanization - Relay BCE exceptions to userland as SIGSEGV - Provide kernel fpu functions - Optimize memory ops (memset/memcpy/memmove) - Optimize checksum and crc32(c) calculation - Add ARCH_HAS_FORTIFY_SOURCE selection - Add function error injection support - Add ftrace with direct call support - Add basic perf tools support * tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits) tools/perf: Add basic support for LoongArch LoongArch: ftrace: Add direct call trampoline samples support LoongArch: ftrace: Add direct call support LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses LoongArch: Add support for function error injection LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection LoongArch: crypto: Add crc32 and crc32c hw acceleration LoongArch: Add checksum optimization for 64-bit system LoongArch: Optimize memory ops (memset/memcpy/memmove) LoongArch: Provide kernel fpu functions LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs() LoongArch: Humanize the ESTAT line when showing registers LoongArch: Humanize the ECFG line when showing registers LoongArch: Humanize the EUEN line when showing registers LoongArch: Humanize the PRMD line when showing registers LoongArch: Humanize the CRMD line when showing registers LoongArch: Fix format of CSR lines during show_regs() ...
2023-05-02crypto: api - Fix CRYPTO_USER checks for report functionOndrej Mosnacek9-9/+9
Checking the config via ifdef incorrectly compiles out the report functions when CRYPTO_USER is set to =m. Fix it by using IS_ENABLED() instead. Fixes: c0f9e01dd266 ("crypto: api - Check CRYPTO_USER instead of NET for report") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-01LoongArch: crypto: Add crc32 and crc32c hw accelerationMin Zhou1-0/+3
With a blatant copy of some MIPS bits we introduce the crc32 and crc32c hw accelerated module to LoongArch. LoongArch has provided these instructions to calculate crc32 and crc32c: * crc.w.b.w crcc.w.b.w * crc.w.h.w crcc.w.h.w * crc.w.w.w crcc.w.w.w * crc.w.d.w crcc.w.d.w So we can make use of these instructions to improve the performance of calculation for crc32(c) checksums. As can be seen from the following test results, crc32(c) instructions can improve the performance by 58%. Software implemention Hardware acceleration Buffer size time cost (seconds) time cost (seconds) Accel. 100 KB 0.000845 0.000534 59.1% 1 MB 0.007758 0.004836 59.4% 10 MB 0.076593 0.047682 59.4% 100 MB 0.756734 0.479126 58.5% 1000 MB 7.563841 4.778266 58.5% Signed-off-by: Min Zhou <zhoumin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-28crypto: engine - fix crypto_queue backlog handlingOlivier Bacon2-3/+6
CRYPTO_TFM_REQ_MAY_BACKLOG tells the crypto driver that it should internally backlog requests until the crypto hw's queue becomes full. At that point, crypto_engine backlogs the request and returns -EBUSY. Calling driver such as dm-crypt then waits until the complete() function is called with a status of -EINPROGRESS before sending a new request. The problem lies in the call to complete() with a value of -EINPROGRESS that is made when a backlog item is present on the queue. The call is done before the successful execution of the crypto request. In the case that do_one_request() returns < 0 and the retry support is available, the request is put back in the queue. This leads upper drivers to send a new request even if the queue is still full. The problem can be reproduced by doing a large dd into a crypto dm-crypt device. This is pretty easy to see when using Freescale CAAM crypto driver and SWIOTLB dma. Since the actual amount of requests that can be hold in the queue is unlimited we get IOs error and dma allocation. The fix is to call complete with a value of -EINPROGRESS only if the request is not enqueued back in crypto_queue. This is done by calling complete() later in the code. In order to delay the decision, crypto_queue is modified to correctly set the backlog pointer when a request is enqueued back. Fixes: 6a89f492f8e5 ("crypto: engine - support for parallel requests based on retry mechanism") Co-developed-by: Sylvain Ouellet <souellet@genetec.com> Signed-off-by: Sylvain Ouellet <souellet@genetec.com> Signed-off-by: Olivier Bacon <obacon@genetec.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-27Merge tag 'modules-6.4-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "The summary of the changes for this pull requests is: - Song Liu's new struct module_memory replacement - Nick Alcock's MODULE_LICENSE() removal for non-modules - My cleanups and enhancements to reduce the areas where we vmalloc module memory for duplicates, and the respective debug code which proves the remaining vmalloc pressure comes from userspace. Most of the changes have been in linux-next for quite some time except the minor fixes I made to check if a module was already loaded prior to allocating the final module memory with vmalloc and the respective debug code it introduces to help clarify the issue. Although the functional change is small it is rather safe as it can only *help* reduce vmalloc space for duplicates and is confirmed to fix a bootup issue with over 400 CPUs with KASAN enabled. I don't expect stable kernels to pick up that fix as the cleanups would have also had to have been picked up. Folks on larger CPU systems with modules will want to just upgrade if vmalloc space has been an issue on bootup. Given the size of this request, here's some more elaborate details: The functional change change in this pull request is the very first patch from Song Liu which replaces the 'struct module_layout' with a new 'struct module_memory'. The old data structure tried to put together all types of supported module memory types in one data structure, the new one abstracts the differences in memory types in a module to allow each one to provide their own set of details. This paves the way in the future so we can deal with them in a cleaner way. If you look at changes they also provide a nice cleanup of how we handle these different memory areas in a module. This change has been in linux-next since before the merge window opened for v6.3 so to provide more than a full kernel cycle of testing. It's a good thing as quite a bit of fixes have been found for it. Jason Baron then made dynamic debug a first class citizen module user by using module notifier callbacks to allocate / remove module specific dynamic debug information. Nick Alcock has done quite a bit of work cross-tree to remove module license tags from things which cannot possibly be module at my request so to: a) help him with his longer term tooling goals which require a deterministic evaluation if a piece a symbol code could ever be part of a module or not. But quite recently it is has been made clear that tooling is not the only one that would benefit. Disambiguating symbols also helps efforts such as live patching, kprobes and BPF, but for other reasons and R&D on this area is active with no clear solution in sight. b) help us inch closer to the now generally accepted long term goal of automating all the MODULE_LICENSE() tags from SPDX license tags In so far as a) is concerned, although module license tags are a no-op for non-modules, tools which would want create a mapping of possible modules can only rely on the module license tag after the commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"). Nick has been working on this *for years* and AFAICT I was the only one to suggest two alternatives to this approach for tooling. The complexity in one of my suggested approaches lies in that we'd need a possible-obj-m and a could-be-module which would check if the object being built is part of any kconfig build which could ever lead to it being part of a module, and if so define a new define -DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've suggested would be to have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as well but that means getting kconfig symbol names mapping to modules always, and I don't think that's the case today. I am not aware of Nick or anyone exploring either of these options. Quite recently Josh Poimboeuf has pointed out that live patching, kprobes and BPF would benefit from resolving some part of the disambiguation as well but for other reasons. The function granularity KASLR (fgkaslr) patches were mentioned but Joe Lawrence has clarified this effort has been dropped with no clear solution in sight [1]. In the meantime removing module license tags from code which could never be modules is welcomed for both objectives mentioned above. Some developers have also welcomed these changes as it has helped clarify when a module was never possible and they forgot to clean this up, and so you'll see quite a bit of Nick's patches in other pull requests for this merge window. I just picked up the stragglers after rc3. LWN has good coverage on the motivation behind this work [2] and the typical cross-tree issues he ran into along the way. The only concrete blocker issue he ran into was that we should not remove the MODULE_LICENSE() tags from files which have no SPDX tags yet, even if they can never be modules. Nick ended up giving up on his efforts due to having to do this vetting and backlash he ran into from folks who really did *not understand* the core of the issue nor were providing any alternative / guidance. I've gone through his changes and dropped the patches which dropped the module license tags where an SPDX license tag was missing, it only consisted of 11 drivers. To see if a pull request deals with a file which lacks SPDX tags you can just use: ./scripts/spdxcheck.py -f \ $(git diff --name-only commid-id | xargs echo) You'll see a core module file in this pull request for the above, but that's not related to his changes. WE just need to add the SPDX license tag for the kernel/module/kmod.c file in the future but it demonstrates the effectiveness of the script. Most of Nick's changes were spread out through different trees, and I just picked up the slack after rc3 for the last kernel was out. Those changes have been in linux-next for over two weeks. The cleanups, debug code I added and final fix I added for modules were motivated by David Hildenbrand's report of boot failing on a systems with over 400 CPUs when KASAN was enabled due to running out of virtual memory space. Although the functional change only consists of 3 lines in the patch "module: avoid allocation if module is already present and ready", proving that this was the best we can do on the modules side took quite a bit of effort and new debug code. The initial cleanups I did on the modules side of things has been in linux-next since around rc3 of the last kernel, the actual final fix for and debug code however have only been in linux-next for about a week or so but I think it is worth getting that code in for this merge window as it does help fix / prove / evaluate the issues reported with larger number of CPUs. Userspace is not yet fixed as it is taking a bit of time for folks to understand the crux of the issue and find a proper resolution. Worst come to worst, I have a kludge-of-concept [3] of how to make kernel_read*() calls for modules unique / converge them, but I'm currently inclined to just see if userspace can fix this instead" Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0] Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1] Link: https://lwn.net/Articles/927569/ [2] Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3] * tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits) module: add debugging auto-load duplicate module support module: stats: fix invalid_mod_bytes typo module: remove use of uninitialized variable len module: fix building stats for 32-bit targets module: stats: include uapi/linux/module.h module: avoid allocation if module is already present and ready module: add debug stats to help identify memory pressure module: extract patient module check into helper modules/kmod: replace implementation with a semaphore Change DEFINE_SEMAPHORE() to take a number argument module: fix kmemleak annotations for non init ELF sections module: Ignore L0 and rename is_arm_mapping_symbol() module: Move is_arm_mapping_symbol() to module_symbol.h module: Sync code of is_arm_mapping_symbol() scripts/gdb: use mem instead of core_layout to get the module address interconnect: remove module-related code interconnect: remove MODULE_LICENSE in non-modules zswap: remove MODULE_LICENSE in non-modules zpool: remove MODULE_LICENSE in non-modules x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules ...
2023-04-26Merge tag 'v6.4-p1' of ↵Linus Torvalds28-851/+1137
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Total usage stats now include all that returned errors (instead of just some) - Remove maximum hash statesize limit - Add cloning support for hmac and unkeyed hashes - Demote BUG_ON in crypto_unregister_alg to a WARN_ON Algorithms: - Use RIP-relative addressing on x86 to prepare for PIE build - Add accelerated AES/GCM stitched implementation on powerpc P10 - Add some test vectors for cmac(camellia) - Remove failure case where jent is unavailable outside of FIPS mode in drbg - Add permanent and intermittent health error checks in jitter RNG Drivers: - Add support for 402xx devices in qat - Add support for HiSTB TRNG - Fix hash concurrency issues in stm32 - Add OP-TEE firmware support in caam" * tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits) i2c: designware: Add doorbell support for Mendocino i2c: designware: Use PCI PSP driver for communication powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10 crypto: p10-aes-gcm - Remove POWER10_CPU dependency crypto: testmgr - Add some test vectors for cmac(camellia) crypto: cryptd - Add support for cloning hashes crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm crypto: hmac - Add support for cloning crypto: hash - Add crypto_clone_ahash/shash crypto: api - Add crypto_clone_tfm crypto: api - Add crypto_tfm_get crypto: x86/sha - Use local .L symbols for code crypto: x86/crc32 - Use local .L symbols for code crypto: x86/aesni - Use local .L symbols for code crypto: x86/sha256 - Use RIP-relative addressing crypto: x86/ghash - Use RIP-relative addressing crypto: x86/des3 - Use RIP-relative addressing crypto: x86/crc32c - Use RIP-relative addressing crypto: x86/cast6 - Use RIP-relative addressing crypto: x86/cast5 - Use RIP-relative addressing ...
2023-04-24integrity: machine keyring CA configurationEric Snowberg1-0/+2
Add machine keyring CA restriction options to control the type of keys that may be added to it. The motivation is separation of certificate signing from code signing keys. Subsquent work will limit certificates being loaded into the IMA keyring to code signing keys used for signature verification. When no restrictions are selected, all Machine Owner Keys (MOK) are added to the machine keyring. When CONFIG_INTEGRITY_CA_MACHINE_KEYRING is selected, the CA bit must be true. Also the key usage must contain keyCertSign, any other usage field may be set as well. When CONFIG_INTEGRITY_CA_MACHINE_KEYRING_MAX is selected, the CA bit must be true. Also the key usage must contain keyCertSign and the digitialSignature usage may not be set. Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24KEYS: CA link restrictionEric Snowberg1-0/+38
Add a new link restriction. Restrict the addition of keys in a keyring based on the key to be added being a CA. Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24KEYS: X.509: Parse Key UsageEric Snowberg1-0/+28
Parse the X.509 Key Usage. The key usage extension defines the purpose of the key contained in the certificate. id-ce-keyUsage OBJECT IDENTIFIER ::= { id-ce 15 } KeyUsage ::= BIT STRING { digitalSignature (0), contentCommitment (1), keyEncipherment (2), dataEncipherment (3), keyAgreement (4), keyCertSign (5), cRLSign (6), encipherOnly (7), decipherOnly (8) } If the keyCertSign or digitalSignature is set, store it in the public_key structure. Having the purpose of the key being stored during parsing, allows enforcement on the usage field in the future. This will be used in a follow on patch that requires knowing the certificate key usage type. Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.3 Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24KEYS: X.509: Parse Basic Constraints for CAEric Snowberg1-0/+22
Parse the X.509 Basic Constraints. The basic constraints extension identifies whether the subject of the certificate is a CA. BasicConstraints ::= SEQUENCE { cA BOOLEAN DEFAULT FALSE, pathLenConstraint INTEGER (0..MAX) OPTIONAL } If the CA is true, store it in the public_key. This will be used in a follow on patch that requires knowing if the public key is a CA. Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.9 Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-20crypto: testmgr - Add some test vectors for cmac(camellia)David Howells2-0/+53
Add some test vectors for 128-bit cmac(camellia) as found in draft-kato-ipsec-camellia-cmac96and128-01 section 6.2. The document also shows vectors for camellia-cmac-96, and for VK with a length greater than 16, but I'm not sure how to express those in testmgr. This also leaves cts(cbc(camellia)) untested, but I can't seem to find any tests for that that I could put into testmgr. Signed-off-by: David Howells <dhowells@redhat.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: Chuck Lever <chuck.lever@oracle.com> cc: Scott Mayhew <smayhew@redhat.com> cc: linux-nfs@vger.kernel.org cc: linux-crypto@vger.kernel.org Link: https://datatracker.ietf.org/doc/pdf/draft-kato-ipsec-camellia-cmac96and128-01 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20crypto: cryptd - Add support for cloning hashesHerbert Xu1-0/+16
Allow cryptd hashes to be cloned. The underlying hash will be cloned. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20crypto: cryptd - Convert hash to use modern init_tfm/exit_tfmHerbert Xu1-9/+9
The cryptd hash template was still using the obsolete cra_init/cra_exit interface. Make it use the modern ahash init_tfm/exit_tfm instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20crypto: hmac - Add support for cloningHerbert Xu1-0/+15
Allow hmac to be cloned. The underlying hash can be used directly with a reference count. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20crypto: hash - Add crypto_clone_ahash/shashHerbert Xu3-0/+107
This patch adds the helpers crypto_clone_ahash and crypto_clone_shash. They are the hash-specific counterparts of crypto_clone_tfm. This allows code paths that cannot otherwise allocate a hash tfm object to do so. Once a new tfm has been obtained its key could then be changed without impacting other users. Note that only algorithms that implement clone_tfm can be cloned. However, all keyless hashes can be cloned by simply reusing the tfm object. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20crypto: api - Add crypto_clone_tfmHerbert Xu2-9/+52
This patch adds the helper crypto_clone_tfm. The purpose is to allocate a tfm object with GFP_ATOMIC. As we cannot sleep, the object has to be cloned from an existing tfm object. This allows code paths that cannot otherwise allocate a crypto_tfm object to do so. Once a new tfm has been obtained its key could then be changed without impacting other users. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20crypto: api - Add crypto_tfm_getHerbert Xu2-0/+10
Add a crypto_tfm_get interface to allow tfm objects to be shared. They can still be freed in the usual way. This should only be done with tfm objects with no keys. You must also not modify the tfm flags in any way once it becomes shared. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-14crypto: api - Move low-level functions into algapi.hHerbert Xu2-4/+9
A number of low-level functions were exposed in crypto.h. Move them into algapi.h (and internal.h). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-13KEYS: remove MODULE_LICENSE in non-modulesNick Alcock1-1/+0
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: David Howells <dhowells@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: keyrings@vger.kernel.org Cc: linux-crypto@vger.kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-06crypto: hash - Remove maximum statesize limitHerbert Xu1-2/+1
Remove the HASH_MAX_STATESIZE limit now that it is unused. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06crypto: algif_hash - Allocate hash state with kmallocHerbert Xu1-4/+15
Allocating the hash state on the stack limits its size. Change this to use kmalloc so the limit can be removed for new drivers. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06crypto: drbg - Only fail when jent is unavailable in FIPS modeHerbert Xu1-1/+1
When jent initialisation fails for any reason other than ENOENT, the entire drbg fails to initialise, even when we're not in FIPS mode. This is wrong because we can still use the kernel RNG when we're not in FIPS mode. Change it so that it only fails when we are in FIPS mode. Fixes: 57225e679788 ("crypto: drbg - Use callback API for random readiness") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06crypto: jitter - permanent and intermittent health errorsStephan Müller3-120/+76
According to SP800-90B, two health failures are allowed: the intermittend and the permanent failure. So far, only the intermittent failure was implemented. The permanent failure was achieved by resetting the entire entropy source including its health test state and waiting for two or more back-to-back health errors. This approach is appropriate for RCT, but not for APT as APT has a non-linear cutoff value. Thus, this patch implements 2 cutoff values for both RCT/APT. This implies that the health state is left untouched when an intermittent failure occurs. The noise source is reset and a new APT powerup-self test is performed. Yet, whith the unchanged health test state, the counting of failures continues until a permanent failure is reached. Any non-failing raw entropy value causes the health tests to reset. The intermittent error has an unchanged significance level of 2^-30. The permanent error has a significance level of 2^-60. Considering that this level also indicates a false-positive rate (see SP800-90B section 4.2) a false-positive must only be incurred with a low probability when considering a fleet of Linux kernels as a whole. Hitting the permanent error may cause a panic(), the following calculation applies: Assuming that a fleet of 10^9 Linux kernels run concurrently with this patch in FIPS mode and on each kernel 2 health tests are performed every minute for one year, the chances of a false positive is about 1:1000 based on the binomial distribution. In addition, any power-up health test errors triggered with jent_entropy_init are treated as permanent errors. A permanent failure causes the entire entropy source to permanently return an error. This implies that a caller can only remedy the situation by re-allocating a new instance of the Jitter RNG. In a subsequent patch, a transparent re-allocation will be provided which also changes the implied heuristic entropy assessment. In addition, when the kernel is booted with fips=1, the Jitter RNG is defined to be part of a FIPS module. The permanent error of the Jitter RNG is translated as a FIPS module error. In this case, the entire FIPS module must cease operation. This is implemented in the kernel by invoking panic(). The patch also fixes an off-by-one in the RCT cutoff value which is now set to 30 instead of 31. This is because the counting of the values starts with 0. Reviewed-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Reviewed-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-24async_tx: fix kernel-doc notation warningsRandy Dunlap2-7/+7
Fix kernel-doc warnings by adding "struct" keyword or "enum" keyword. Also fix 2 function parameter descriptions. Change some functions and structs from kernel-doc /** notation to regular /* comment notation. async_pq.c:18: warning: cannot understand function prototype: 'struct page *pq_scribble_page; ' async_pq.c:18: error: Cannot parse struct or union! async_pq.c:40: warning: No description found for return value of 'do_async_gen_syndrome' async_pq.c:109: warning: Function parameter or member 'blocks' not described in 'do_sync_gen_syndrome' async_pq.c:109: warning: Function parameter or member 'offsets' not described in 'do_sync_gen_syndrome' async_pq.c:109: warning: Function parameter or member 'disks' not described in 'do_sync_gen_syndrome' async_pq.c:109: warning: Function parameter or member 'len' not described in 'do_sync_gen_syndrome' async_pq.c:109: warning: Function parameter or member 'submit' not described in 'do_sync_gen_syndrome' async_tx.c:136: warning: cannot understand function prototype: 'enum submit_disposition ' async_tx.c:264: warning: Function parameter or member 'tx' not described in 'async_tx_quiesce' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-24crypto: api - Demote BUG_ON() in crypto_unregister_alg() to a WARN_ON()Toke Høiland-Jørgensen1-1/+3
The crypto_unregister_alg() function expects callers to ensure that any algorithm that is unregistered has a refcnt of exactly 1, and issues a BUG_ON() if this is not the case. However, there are in fact drivers that will call crypto_unregister_alg() without ensuring that the refcnt has been lowered first, most notably on system shutdown. This causes the BUG_ON() to trigger, which prevents a clean shutdown and hangs the system. To avoid such hangs on shutdown, demote the BUG_ON() in crypto_unregister_alg() to a WARN_ON() with early return. Cc stable because this problem was observed on a 6.2 kernel, cf the link below. Link: https://lore.kernel.org/r/87r0tyq8ph.fsf@toke.dk Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-21asymmetric_keys: log on fatal failures in PE/pkcs7Robbie Harwood2-17/+17
These particular errors can be encountered while trying to kexec when secureboot lockdown is in place. Without this change, even with a signed debug build, one still needs to reboot the machine to add the appropriate dyndbg parameters (since lockdown blocks debugfs). Accordingly, upgrade all pr_debug() before fatal error into pr_warn(). Signed-off-by: Robbie Harwood <rharwood@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Jarkko Sakkinen <jarkko@kernel.org> cc: Eric Biederman <ebiederm@xmission.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org cc: kexec@lists.infradead.org Link: https://lore.kernel.org/r/20230220171254.592347-3-rharwood@redhat.com/ # v2
2023-03-21verify_pefile: relax wrapper length checkRobbie Harwood1-4/+8
The PE Format Specification (section "The Attribute Certificate Table (Image Only)") states that `dwLength` is to be rounded up to 8-byte alignment when used for traversal. Therefore, the field is not required to be an 8-byte multiple in the first place. Accordingly, pesign has not performed this alignment since version 0.110. This causes kexec failure on pesign'd binaries with "PEFILE: Signature wrapper len wrong". Update the comment and relax the check. Signed-off-by: Robbie Harwood <rharwood@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Jarkko Sakkinen <jarkko@kernel.org> cc: Eric Biederman <ebiederm@xmission.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org cc: kexec@lists.infradead.org Link: https://learn.microsoft.com/en-us/windows/win32/debug/pe-format#the-attribute-certificate-table-image-only Link: https://github.com/rhboot/pesign Link: https://lore.kernel.org/r/20230220171254.592347-2-rharwood@redhat.com/ # v2
2023-03-17crypto: fips - simplify one-level sysctl registration for crypto_sysctl_tableLuis Chamberlain1-10/+1
There is no need to declare an extra tables to just create directory, this can be easily be done with a prefix path with register_sysctl(). Simplify this registration. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: testmgr - fix RNG performance in fuzz testsEric Biggers1-97/+169
The performance of the crypto fuzz tests has greatly regressed since v5.18. When booting a kernel on an arm64 dev board with all software crypto algorithms and CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled, the fuzz tests now take about 200 seconds to run, or about 325 seconds with lockdep enabled, compared to about 5 seconds before. The root cause is that the random number generation has become much slower due to commit d4150779e60f ("random32: use real rng for non-deterministic randomness"). On my same arm64 dev board, at the time the fuzz tests are run, get_random_u8() is about 345x slower than prandom_u32_state(), or about 469x if lockdep is enabled. Lockdep makes a big difference, but much of the rest comes from the get_random_*() functions taking a *very* slow path when the CRNG is not yet initialized. Since the crypto self-tests run early during boot, even having a hardware RNG driver enabled (CONFIG_CRYPTO_DEV_QCOM_RNG in my case) doesn't prevent this. x86 systems don't have this issue, but they still see a significant regression if lockdep is enabled. Converting the "Fully random bytes" case in generate_random_bytes() to use get_random_bytes() helps significantly, improving the test time to about 27 seconds. But that's still over 5x slower than before. This is all a bit silly, though, since the fuzz tests don't actually need cryptographically secure random numbers. So let's just make them use a non-cryptographically-secure RNG as they did before. The original prandom_u32() is gone now, so let's use prandom_u32_state() instead, with an explicitly managed state, like various other self-tests in the kernel source tree (rbtree_test.c, test_scanf.c, etc.) already do. This also has the benefit that no locking is required anymore, so performance should be even better than the original version that used prandom_u32(). Fixes: d4150779e60f ("random32: use real rng for non-deterministic randomness") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: api - Check CRYPTO_USER instead of NET for reportHerbert Xu9-72/+36
The report function is currently conditionalised on CONFIG_NET. As it's only used by CONFIG_CRYPTO_USER, conditionalising on that instead of CONFIG_NET makes more sense. This gets rid of a rarely used code-path. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: rng - Count error stats differentlyHerbert Xu3-77/+48
Move all stat code specific to rng into the rng code. While we're at it, change the stats so that bytes and counts are always incremented even in case of error. This allows the reference counting to be removed as we can now increment the counters prior to the operation. After the operation we simply increase the error count if necessary. This is safe as errors can only occur synchronously (or rather, the existing code already ignored asynchronous errors which are only visible to the callback function). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: skcipher - Count error stats differentlyHerbert Xu3-55/+87
Move all stat code specific to skcipher into the skcipher code. While we're at it, change the stats so that bytes and counts are always incremented even in case of error. This allows the reference counting to be removed as we can now increment the counters prior to the operation. After the operation we simply increase the error count if necessary. This is safe as errors can only occur synchronously (or rather, the existing code already ignored asynchronous errors which are only visible to the callback function). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: kpp - Count error stats differentlyHerbert Xu3-58/+34
Move all stat code specific to kpp into the kpp code. While we're at it, change the stats so that bytes and counts are always incremented even in case of error. This allows the reference counting to be removed as we can now increment the counters prior to the operation. After the operation we simply increase the error count if necessary. This is safe as errors can only occur synchronously (or rather, the existing code already ignored asynchronous errors which are only visible to the callback function). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: acomp - Count error stats differentlyHerbert Xu5-74/+101
Move all stat code specific to acomp into the acomp code. While we're at it, change the stats so that bytes and counts are always incremented even in case of error. This allows the reference counting to be removed as we can now increment the counters prior to the operation. After the operation we simply increase the error count if necessary. This is safe as errors can only occur synchronously (or rather, the existing code already ignored asynchronous errors which are only visible to the callback function). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: hash - Count error stats differentlyHerbert Xu5-117/+176
Move all stat code specific to hash into the hash code. While we're at it, change the stats so that bytes and counts are always incremented even in case of error. This allows the reference counting to be removed as we can now increment the counters prior to the operation. After the operation we simply increase the error count if necessary. This is safe as errors can only occur synchronously (or rather, the existing code already ignored asynchronous errors which are only visible to the callback function). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: akcipher - Count error stats differentlyHerbert Xu3-76/+34
Move all stat code specific to akcipher into the akcipher code. While we're at it, change the stats so that bytes and counts are always incremented even in case of error. This allows the reference counting to be removed as we can now increment the counters prior to the operation. After the operation we simply increase the error count if necessary. This is safe as errors can only occur synchronously (or rather, the existing code already ignored asynchronous errors which are only visible to the callback function). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: aead - Count error stats differentlyHerbert Xu3-60/+73
Move all stat code specific to aead into the aead code. While we're at it, change the stats so that bytes and counts are always incremented even in case of error. This allows the reference counting to be removed as we can now increment the counters prior to the operation. After the operation we simply increase the error count if necessary. This is safe as errors can only occur synchronously (or rather, the existing code already ignored asynchronous errors which are only visible to the callback function). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14crypto: algapi - Move stat reporting into algapiHerbert Xu1-0/+6
The stats code resurrected the unions from the early days of kernel crypto. This patch starts the process of moving them out to the individual type structures as we do for everything else. In particular, add a report_stat function to cra_type and call that from the stats code if available. This allows us to move the actual code over one-by-one. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-21Merge tag 'net-next-6.3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-21Merge tag 'v6.3-p1' of ↵Linus Torvalds29-415/+400
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Use kmap_local instead of kmap_atomic - Change request callback to take void pointer - Print FIPS status in /proc/crypto (when enabled) Algorithms: - Add rfc4106/gcm support on arm64 - Add ARIA AVX2/512 support on x86 Drivers: - Add TRNG driver for StarFive SoC - Delete ux500/hash driver (subsumed by stm32/hash) - Add zlib support in qat - Add RSA support in aspeed" * tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits) crypto: x86/aria-avx - Do not use avx2 instructions crypto: aspeed - Fix modular aspeed-acry crypto: hisilicon/qm - fix coding style issues crypto: hisilicon/qm - update comments to match function crypto: hisilicon/qm - change function names crypto: hisilicon/qm - use min() instead of min_t() crypto: hisilicon/qm - remove some unused defines crypto: proc - Print fips status crypto: crypto4xx - Call dma_unmap_page when done crypto: octeontx2 - Fix objects shared between several modules crypto: nx - Fix sparse warnings crypto: ecc - Silence sparse warning tls: Pass rec instead of aead_req into tls_encrypt_done crypto: api - Remove completion function scaffolding tls: Remove completion function scaffolding tipc: Remove completion function scaffolding net: ipv6: Remove completion function scaffolding net: ipv4: Remove completion function scaffolding net: macsec: Remove completion function scaffolding dm: Remove completion function scaffolding ...
2023-02-14crypto: proc - Print fips statusHerbert Xu1-0/+6
As FIPS may disable algorithms it is useful to show their status in /proc/crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-14crypto: ecc - Silence sparse warningHerbert Xu1-2/+4
Rewrite the bitwise operations to silence the sparse warnings: CHECK ../crypto/ecc.c ../crypto/ecc.c:1387:39: warning: dubious: !x | y ../crypto/ecc.c:1397:47: warning: dubious: !x | y Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13crypto: api - Use data directly in completion functionHerbert Xu19-139/+124
This patch does the final flag day conversion of all completion functions which are now all contained in the Crypto API. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13crypto: cryptd - Use request_complete helpersHerbert Xu1-108/+126
Use the request_complete helpers instead of calling the completion function directly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13crypto: rsa-pkcs1pad - Use akcipher_request_completeHerbert Xu1-19/+15
Use the akcipher_request_complete helper instead of calling the completion function directly. In fact the previous code was buggy in that EINPROGRESS was never passed back to the original caller. Fixes: 3d5b1ecdea6f ("crypto: rsa - RSA padding algorithm") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13crypto: engine - Use crypto_request_completeHerbert Xu1-3/+3
Use the crypto_request_complete helper instead of calling the completion function directly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13crypto: hash - Use crypto_request_completeHerbert Xu1-105/+74
Use the crypto_request_complete helper instead of calling the completion function directly. This patch also removes the voodoo programming previously used for unaligned ahash operations and replaces it with a sub-request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13crypto: cryptd - Use subreq for AEADHerbert Xu1-4/+16
AEAD reuses the existing request object for its child. This is error-prone and unnecessary. This patch adds a subrequest object just like we do for skcipher and hash. This patch also restores the original completion function as we do for skcipher/hash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>