summaryrefslogtreecommitdiff
path: root/arch/s390/kernel/dis.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-24s390: kernel: add SPDX identifiers to the remaining filesGreg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the arch/s390/kernel/ files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-24s390/disassembler: correct disassembly lines alignmentVasily Gorbik1-1/+1
176.718956 Krnl Code: 00000000004d38b0: a54c0018 llihh %r4,24 176.718956 00000000004d38b4: b9080014 agr %r1,%r4 ^ Using a tab to align disassembly lines which follow the first line with "Krnl Code: " doesn't always work, e.g. if there is a prefix (timestamp or syslog prefix) which is not 8 chars aligned. Go back to alignment with spaces. Fixes: b192571d1ae3 ("s390/disassembler: increase show_code buffer size") Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-20s390/disassembler: remove confusing codeHeiko Carstens1-1/+6
When searching the opcode offset table within find_insn() the check "entry->opcode == 0" was intended to clarify that 1-byte opcodes, the first one being 0, are special. However there is no mnemonic for an illegal opcode starting with 0. Therefore there is also no opcode offset table entry that matches, which again means that the check never is true. Therefore just remove the confusing check, and add a comment which hopefully explains how this works. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-16s390/disassembler: increase show_code buffer sizeVasily Gorbik1-2/+2
Current buffer size of 64 is too small. objdump shows that there are instructions which would require up to 75 bytes buffer (with current formating). 128 bytes "ought to be enough for anybody". Also replaces 8 spaces with a single tab to reduce the memory footprint. Fixes the following KASAN finding: BUG: KASAN: stack-out-of-bounds in number+0x3fe/0x538 Write of size 1 at addr 000000005a4a75a0 by task bash/1282 CPU: 1 PID: 1282 Comm: bash Not tainted 4.14.0+ #215 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) Call Trace: ([<000000000011eeb6>] show_stack+0x56/0x88) [<0000000000e1ce1a>] dump_stack+0x15a/0x1b0 [<00000000004e2994>] print_address_description+0xf4/0x288 [<00000000004e2cf2>] kasan_report+0x13a/0x230 [<0000000000e38ae6>] number+0x3fe/0x538 [<0000000000e3dfe4>] vsnprintf+0x194/0x948 [<0000000000e3ea42>] sprintf+0xa2/0xb8 [<00000000001198dc>] print_insn+0x374/0x500 [<0000000000119346>] show_code+0x4ee/0x538 [<000000000011f234>] show_registers+0x34c/0x388 [<000000000011f2ae>] show_regs+0x3e/0xa8 [<000000000011f502>] die+0x1ea/0x2e8 [<0000000000138f0e>] do_no_context+0x106/0x168 [<0000000000139a1a>] do_protection_exception+0x4da/0x7d0 [<0000000000e55914>] pgm_check_handler+0x16c/0x1c0 [<000000000090639e>] sysrq_handle_crash+0x46/0x58 ([<0000000000000007>] 0x7) [<00000000009073fa>] __handle_sysrq+0x102/0x218 [<0000000000907c06>] write_sysrq_trigger+0xd6/0x100 [<000000000061d67a>] proc_reg_write+0xb2/0x128 [<0000000000520be6>] __vfs_write+0xee/0x368 [<0000000000521222>] vfs_write+0x21a/0x278 [<000000000052156a>] SyS_write+0xda/0x178 [<0000000000e555cc>] system_call+0xc4/0x270 The buggy address belongs to the page: page:000003d1016929c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() raw: 0000000000000000 0000000000000000 0000000000000000 ffffffff00000000 raw: 0000000000000100 0000000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 000000005a4a7480: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 000000005a4a7500: 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 00 >000000005a4a7580: 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 ^ 000000005a4a7600: 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 f8 f8 000000005a4a7680: f2 f2 f2 f2 f2 f2 f8 f8 f2 f2 f3 f3 f3 f3 00 00 ================================================================== Cc: <stable@vger.kernel.org> Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-08s390/disassembler: generate opcode tables from text fileHeiko Carstens1-1830/+282
The current way of adding new instructions to the opcode tables is painful and error prone. Therefore add, similar to binutils, a text file which contains all opcodes and the corresponding mnemonics and instruction formats. A small gen_opcode_table tool then generates a header file with the required enums and opcode table initializers at the prepare step of the kernel build. This way only a simple text file has to be maintained, which can be rather easily extended. Unlike before where there were plenty of opcode tables and a large switch statement to find the correct opcode table, there is now only one opcode table left which contains all instructions. A second opcode offset table now contains offsets within the opcode table to find instructions which have the same opcode prefix. In order to save space all 1-byte opcode instructions are grouped together at the end of the opcode table. This is also quite similar to like it was before. In addition also move and change code and definitions within the disassembler. As a side effect this reduces the size required for the code and opcode tables by ~1.5k. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2017-11-08s390/disassembler: remove insn_to_mnemonic()Heiko Carstens1-28/+0
insn_to_mnemonic() was introduced ages ago for KVM debugging, but is unused in the meantime. Therefore remove it. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2017-09-29s390/disassembler: add new z14 instructionsHeiko Carstens1-1/+82
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29s390/disassembler: add missing z13 instructionsHeiko Carstens1-2/+28
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29s390/disassembler: add sthyi instructionHeiko Carstens1-0/+1
This instruction came with a z/VM extension and not with a specific machine generation. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29s390/disassembler: remove double instructionsHeiko Carstens1-6/+0
Remove a couple of instructions that are listed twice. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29s390/disassembler: fix LRDFU formatHeiko Carstens1-1/+1
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29s390/disassembler: add missing end marker for e7 tableHeiko Carstens1-0/+1
The e7 opcode table does not have an end marker. Hence when trying to find an unknown e7 instruction the code will access memory behind the table until it finds something that matches the opcode, or the kernel crashes, whatever comes first. This affects not only the in-kernel disassembler but also uprobes and kprobes which refuse to set a probe on unknown instructions, and therefore search the opcode tables to figure out if instructions are known or not. Cc: <stable@vger.kernel.org> # v3.18+ Fixes: 3585cb0280654 ("s390/disassembler: add vector instructions") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390: kernel: Audit and remove any unnecessary uses of module.hPaul Gortmaker1-1/+1
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each change instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-17s390/disassambler: use pr_cont where appropriateHeiko Carstens1-2/+2
Just like for dumpstack use pr_cont instead of simple printk calls to fix the output when disassembling a piece of code. Before: [ 0.840627] Krnl Code: 000000000017d1c6: a77400f7 brc 7,17d3b4 [ 0.840630] 000000000017d1ca: 92015000 mvi 0(%r5),1 [ 0.840634] #000000000017d1ce: a7f40001 brc 15,17d1d0 After: [ 0.831792] Krnl Code: 000000000017d13e: a77400f7 brc 7,17d32c 000000000017d142: 92015000 mvi 0(%r5),1 #000000000017d146: a7f40001 brc 15,17d148 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-15s390: remove math emulation codeHeiko Carstens1-1/+0
The last in-kernel user is gone so we can finally remove this code. Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-02s390/dis: use correct escape sequence for '%' characterHeiko Carstens1-12/+5
The double escape character sequence introduced with commit 272fa59ccb4f ("s390/dis: Fix handling of format specifiers") is not necessary anymore since commit 561e10300269 ("s390/dis: Fix printing of the register numbers"). Instead this now generates an extra '%' character: lg %%r1,160(%%r11) So fix this and basically revert 272fa59ccb4f. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-13Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Among the traditional bug fixes and cleanups are some improvements: - A tool to generated the facility lists, generating the bit fields by hand has been a source of bugs in the past - The spinlock loop is reordered to avoid bursts of hypervisor calls - Add support for the open-for-business interface to the service element - The get_cpu call is added to the vdso - A set of tracepoints is defined for the common I/O layer - The deprecated sclp_cpi module is removed - Update default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (56 commits) s390/sclp: fix possible control register corruption s390: fix normalization bug in exception table sorting s390/configs: update default configurations s390/vdso: optimize getcpu system call s390: drop smp_mb in vdso_init s390: rename struct _lowcore to struct lowcore s390/mem_detect: use unsigned longs s390/ptrace: get rid of long longs in psw_bits s390/sysinfo: add missing SYSIB 1.2.2 multithreading fields s390: get rid of CONFIG_SCHED_MC and CONFIG_SCHED_BOOK s390/Kconfig: remove pointless 64 bit dependencies s390/dasd: fix failfast for disconnected devices s390/con3270: testing return kzalloc retval s390/hmcdrv: constify hmcdrv_ftp_ops structs s390/cio: add NULL test s390/cio: Change I/O instructions from inline to normal functions s390/cio: Introduce common I/O layer tracepoints s390/cio: Consolidate inline assemblies and related data definitions s390/cio: Fix incorrect xsch opcode specification s390/cio: Remove unused inline assemblies ...
2015-12-18s390/dis: Fix handling of format specifiersMichael Holzheu1-5/+12
The print_insn() function returns strings like "lghi %r1,0". To escape the '%' character in sprintf() a second '%' is used. For example "lghi %%r1,0" is converted into "lghi %r1,0". After print_insn() the output string is passed to printk(). Because format specifiers like "%r" or "%f" are ignored by printk() this works by chance most of the time. But for instructions with control registers like "lctl %c6,%c6,780" this fails because printk() interprets "%c" as character format specifier. Fix this problem and escape the '%' characters twice. For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf() into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780". Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dis: Fix printing of the register numbersChristian Borntraeger1-2/+2
Since commit b006f19b055f ("lib/vsprintf.c: handle invalid format specifiers more robustly") I get errors like [...] Krnl Code: 00000000004e2410: c00400000000 brcl 0,4e2410 Please remove unsupported %r in format string [ 8.179483] ------------[ cut here ]------------ [ 8.179484] WARNING: at lib/vsprintf.c:1781 Turns out that our disassembler relied on %r not being used as format string. Let's do the proper escaping of our decode buffers. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-25s390: remove 31 bit supportHeiko Carstens1-47/+1
Remove the 31 bit support in order to reduce maintenance cost and effectively remove dead code. Since a couple of years there is no distribution left that comes with a 31 bit kernel. The 31 bit kernel also has been broken since more than a year before anybody noticed. In addition I added a removal warning to the kernel shown at ipl for 5 minutes: a960062e5826 ("s390: add 31 bit warning message") which let everybody know about the plan to remove 31 bit code. We didn't get any response. Given that the last 31 bit only machine was introduced in 1999 let's remove the code. Anybody with 31 bit user space code can still use the compat mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22s390: add SMT supportMartin Schwidefsky1-2/+6
The multi-threading facility is introduced with the z13 processor family. This patch adds code to detect the multi-threading facility. With the facility enabled each core will surface multiple hardware threads to the system. Each hardware threads looks like a normal CPU to the operating system with all its registers and properties. The SCLP interface reports the SMT topology indirectly via the maximum thread id. Each reported CPU in the result of a read-scp-information is a core representing a number of hardware threads. To reflect the reduced CPU capacity if two hardware threads run on a single core the MT utilization counter set is used to normalize the raw cputime obtained by the CPU timer deltas. This scaled cputime is reported via the taskstats interface. The normal /proc/stat numbers are based on the raw cputime and are not affected by the normalization. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-08s390/disassembler: remove indentical initializerHeiko Carstens1-1/+0
Remove one of the two identical initializer entries. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-10-09s390/disassembler: add vector instructionsMartin Schwidefsky1-3/+242
Add the instruction introduced with the vector extension to the in-kernel disassembler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/kprobes: allow kprobes only on known instructionsHeiko Carstens1-1/+1
Since we have an in-kernel disassembler we can make sure that there won't be any kprobes set on random data. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/dis: move common definitions to a header fileSuzuki K. Poulose1-28/+1
The patch moves some of the definitions to a header file. No functional changes involved. I have retained the Copyright Statement from the original file. Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com> [Heiko Carstens: rename s390-dis.h to dis.h] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/dis: rename structures for unique typesSuzuki K. Poulose1-28/+28
Rename 'insn' and 'operand' structures to more canonical names to avoid conflicts. struct insn represents information about an instruction, including the mnemonics, format and opcode. struct operand represents the 'properties' and information on howto interpret the operand value and doesn't contain the value. We rename these structures for avoiding a global conflict. i.e, 1,$s/struct insn/struct s390_insn/g 1,$s/struct operand/struct s390_operand/g Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-07s390/disassembler: prevent endless loop in print_fn_code()Heiko Carstens1-0/+2
If the size of the opcode to be printed is larger than "len" we'll see an overflow of an unsigned long value, which means that the while loop within print_fn_code() will loop quite a long time until there is the next chance for an exit. So add an early exit check. Reported-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/dis: use explicit buf lenStefan Raspl1-4/+5
Pass buffer length in extra parameter. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28s390/dis: Fix invalid array sizeSyam Sidhardhan1-2/+2
We are using sizeof operator for an array given as function argument, which is incorrect. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cleanup: rename SPP to LPPHendrik Brueckner1-1/+0
The set-program-parameter (SPP) instruction has been renamed to load-program-parameter (LPP) (see SA23-2260). Reflect this change and rename all macro/instruction references. Also remove the duplicate SPP/LPP entry in the kernel disassembler instruction list. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-30s390/pci: base supportJan Glauber1-0/+15
Add PCI support for s390, (only 64 bit mode is supported by hardware): - PCI facility tests - PCI instructions: pcilg, pcistg, pcistb, stpcifc, mpcifc, rpcit - map readb/w/l/q and writeb/w/l/q to pcilg and pcistg instructions - pci_iomap implementation - memcpy_fromio/toio - pci_root_ops using special pcilg/pcistg - device, bus and domain allocation Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23s390/disassembler: add new instructionsHeiko Carstens1-193/+370
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-10-04Merge tag 'kvm-3.7-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+27
Pull KVM updates from Avi Kivity: "Highlights of the changes for this release include support for vfio level triggered interrupts, improved big real mode support on older Intels, a streamlines guest page table walker, guest APIC speedups, PIO optimizations, better overcommit handling, and read-only memory." * tag 'kvm-3.7-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (138 commits) KVM: s390: Fix vcpu_load handling in interrupt code KVM: x86: Fix guest debug across vcpu INIT reset KVM: Add resampling irqfds for level triggered interrupts KVM: optimize apic interrupt delivery KVM: MMU: Eliminate pointless temporary 'ac' KVM: MMU: Avoid access/dirty update loop if all is well KVM: MMU: Eliminate eperm temporary KVM: MMU: Optimize is_last_gpte() KVM: MMU: Simplify walk_addr_generic() loop KVM: MMU: Optimize pte permission checks KVM: MMU: Update accessed and dirty bits after guest pagetable walk KVM: MMU: Move gpte_access() out of paging_tmpl.h KVM: MMU: Optimize gpte_access() slightly KVM: MMU: Push clean gpte write protection out of gpte_access() KVM: clarify kvmclock documentation KVM: make processes waiting on vcpu mutex killable KVM: SVM: Make use of asm.h KVM: VMX: Make use of asm.h KVM: VMX: Make lto-friendly KVM: x86: lapic: Clean up find_highest_vector() and count_vectors() ... Conflicts: arch/s390/include/asm/processor.h arch/x86/kvm/i8259.c
2012-09-26s390/disassembler: fix decoding of risblg instructionHeiko Carstens1-1/+1
Fix typo: risblk -> risblg. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add support for transactional memoryMartin Schwidefsky1-0/+12
Allow user-space processes to use transactional execution (TX). If the TX facility is available user space programs can use transactions for fine-grained serialization based on the data objects that are referenced during a transaction. This is useful for lockless data structures and speculative compiler optimizations. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add support for runtime instrumentationJan Glauber1-0/+21
Allow user-space threads to use runtime instrumentation (RI). To enable RI for a thread there is a new s390 specific system call, sys_s390_runtime_instr, that takes as parameter a realtime signal number. If the RI facility is available the system call sets up a control block for the calling thread with the appropriate permissions for the thread to modify the control block. The user-space thread can then use the store and modify RI instructions to alter the control block and start/stop the instrumentation via RION/RIOFF. If the user specified program buffer runs full RI triggers an external interrupt. The external interrupt is translated to a real-time signal that is delivered to the thread that enabled RI on that CPU. The number of the real-time signal is the number specified in the RI system call. So, user-space can select any available real-time signal number in case the application itself uses real-time signals for other purposes. The kernel saves the RI control blocks on task switch only if the running thread was enabled for RI. Therefore, the performance impact on task switch should be negligible if RI is not used. RI is only enabled for user-space mode and is disabled for the supervisor state. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/bpf,jit: BPF Just In Time compiler for s390Martin Schwidefsky1-0/+23
The s390 implementation of the JIT compiler for packet filter speedup. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-05Merge remote-tracking branch 'upstream' into nextAvi Kivity1-2/+2
- bring back critical fixes (esp. aa67f6096c19bc) - provide an updated base for development * upstream: (4334 commits) missed mnt_drop_write() in do_dentry_open() UBIFS: nuke pdflush from comments gfs2: nuke pdflush from comments drbd: nuke pdflush from comments nilfs2: nuke write_super from comments hfs: nuke write_super from comments vfs: nuke pdflush from comments jbd/jbd2: nuke write_super from comments btrfs: nuke pdflush from comments btrfs: nuke write_super from comments ext4: nuke pdflush from comments ext4: nuke write_super from comments ext3: nuke write_super from comments Documentation: fix the VM knobs descritpion WRT pdflush Documentation: get rid of write_super vfs: kill write_super and sync_supers ACPI processor: Fix tick_broadcast_mask online/offline regression ACPI: Only count valid srat memory structures ACPI: Untangle a return statement for better readability Linux 3.6-rc1 ... Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-30s390: make use of user_mode() macro where possibleHeiko Carstens1-2/+2
We use the user_mode() helper already at several places but also have the open coded variant at other places. Convert the code to always use the helper function. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-26s390/dis: Instruction decoding interfaceCornelia Huck1-0/+27
Provide a new function, insn_to_mnemonic, by which e.g. kvm can obtain a human-readable decoding of an instruction's opcode. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-20s390/dis: Add the servc instruction to the disassembler.Cornelia Huck1-0/+1
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20s390/comments: unify copyright messages and remove file namesHeiko Carstens1-2/+0
Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-03-28Disintegrate asm/system.h for S390David Howells1-1/+0
Disintegrate asm/system.h for S390. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-s390@vger.kernel.org
2011-12-27[S390] disassembler: mark exception causing instructionsHeiko Carstens1-2/+7
If an exception happens the PSW either points to the instruction that caused the exception or to the instruction that follows the exception causing instruction, depending on the exception type. Since the inkernel disassembler adds a ">" in front of the disassembly many people assume incorrectly that the instruction that is pointed to must be the cause of the exception. To make people aware that this is not necessarily the case add a different character in front of the disassembled instruction that precedes the current instructions. The output now looks like this: Krnl PSW : 0704200180000000 0000000000120de8 (test_function+0x0/0x100) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: 000003ff00000000 0000000000120de4 000000000091bb40 0000000000000001 000003fffd2ea000 0000000030fb7df8 0000000030fb7f10 000003ffffa113c8 000000000091bb40 000003fffd2ea000 0000000000000002 0000000030fb7f10 000000003f290240 0000000000606220 00000000002cfb5c 0000000030fb7d58 Krnl Code: 0000000000120ddc: b90400a9 lgr %r10,%r9 0000000000120de0: a7f4ff88 brc 15,120cf0 #0000000000120de4: a7f40001 brc 15,120de6 >0000000000120de8: a7f13f80 tmll %r15,16256 0000000000120dec: eb8ff0580024 stmg %r8,%r15,88(%r15) 0000000000120df2: a7840001 brc 8,120df4 0000000000120df6: b90400ef lgr %r14,%r15 0000000000120dfa: a7fbffb8 aghi %r15,-72 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26[S390] irq: merge irq.c and s390_ext.cHeiko Carstens1-1/+1
Merge irq.c and s390_ext.c into irq.c. That way all external interrupt related functions are together. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-10[S390] disassembler: handle b280/spp instructionChristian Borntraeger1-0/+1
arch/s390/kvm/sie64a.S uses the b280 instruction. Tell the builtin disassembler to handle that code. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] add z196 instructions to kernel disassemblerMartin Schwidefsky1-13/+132
Add the new instructions introduced with z196 to the kernel disassembler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] add z9-ec/z10 instruction to kernel disassemblerMartin Schwidefsky1-84/+285
Add the instruction of the z9-ec and z10 machines to the kernel disassembler. Add the missing "ptff" instruction of z9-109 and the missing "sqd" of g5. Remove useless comments with instruction examples from format table. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 15:42:11 +0000