summaryrefslogtreecommitdiff
path: root/arch/mips/netlogic
AgeCommit message (Collapse)AuthorFilesLines
2015-04-13Merge branch '4.0-fixes' into mips-for-linux-nextRalf Baechle1-0/+13
2015-04-10MIPS: Netlogic: Fix for SATA PHY initGanesan Ramalingam1-0/+13
Update to the SATA PHY initialization. This is needed for SATA detection to succeed in all configurations. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: Netlogic: Fix double inclusion of <asm/netlogic/common.h>.Ralf Baechle1-1/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Add built-in dts for XLP5xx boardsGanesan Ramalingam2-3/+16
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8896/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: i2c IRQ mappings for XLP9XXSubhendu Sekhar Behera1-0/+8
The new I2C block in XLP9XX has 4 interrupts, add the mapping for these in nlm_hal.c Signed-off-by: Subhendu Sekhar Behera <sbehera@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8897/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Add irq mapping and setup for XHCI port 3Ganesan Ramalingam2-1/+11
Add support for third XHCI port in XLPII processors. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8895/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Do not enable SUE for coreJayachandran C1-1/+1
Enabling the SUE bit for core can can result in rare cache errors which are difficult to track down, so do not enable it. This can cause a minor performance loss in some tests. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8894/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Handle XLP hardware errataJayachandran C1-0/+20
Core configuration register IFU_BRUB_RESERVE has to be setup to handle a silicon errata which can result in a CPU hang. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8902/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Update function to read DRAM BARsJayachandran C2-6/+8
Change name of xlp_get_dram_map to nlm_get_dram_map to be consistent with the rest of the functions in the file. Pass the the size of the array 'dram_map' to the function, and ensure that it does not write past the end of the array. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Move cores per node out of multi-node.hJayachandran C4-26/+23
Use the current_cpu_data package field to get the node of the current CPU. This allows us to remove xlp_cores_per_node and move nlm_threads_per_node() and nlm_cores_per_node() to netlogic/common.h, which simplifies code. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8889/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Use MIPS topology.hJayachandran C1-0/+1
commit bda4584cd943 ("MIPS: Support CPU topology files in sysfs") added topology related macros for all MIPS platforms and commit bbbf6d8768f5 ("MIPS: NL: Fix nlm_xlp_defconfig build error") removed most of the contents from mach-netlogic/topology.h. The netlogic specific topology is not needed anymore, we just need to setup the package field in current_cpu_data. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8888/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Fix frequency calculation registerGanesan Ramalingam1-4/+4
Change the PIC frequency calculation to use the register that has the current configuration. The existing code used the register that is written to change frequency, which can have an invalid value if the firmware did not set it up correctly. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8885/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Disable writing IRT for disabled blocksJayachandran C1-9/+16
If the device header of a block is not present, return invalid IRT value so that we do not program an incorrect offset. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Fix cop0 prid check in AHCI initGanesan Ramalingam1-1/+1
PRID register should be masked with IMP_MASK to get processor ID. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8883/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Fix nlm_xlp2_get_pic_frequency to use ref_divQingmin Liu1-1/+1
The variable ref_div is initialized to the correct divisor but not used in the frequency calculation. This caused incorrect frequency to be reported when the clock divisor is not 3. Signed-off-by: Qingmin Liu <qingmin@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Fix wait for slave CPUsShanghui Liu1-1/+1
For core 0, the condition of "cpu == bootcpu" is always true, so it does not wait for other three threads to become ready. Fix this by using correct check. Signed-off-by: Shanghui Liu <shliu@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-13mips: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo1-8/+5
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-24MIPS: Netlogic: handle modular AHCI buildsFlorian Fainelli1-2/+4
Commits a951440971d0 ("MIPS: Netlogic: Support for XLP3XX on-chip SATA") and fedfcb1137d2 ("MIPS: Netlogic: XLP9XX on-chip SATA support") added ahci-init and ahci-init-xlp2 as objects to build when CONFIG_SATA_AHCI is enabled. If CONFIG_SATA_AHCI is made modular, these two files will also get built as modules (obj-m), which will result in the following linking failure: ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/ahci-init.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/ahci-init.ko] undefined! ERROR: "nlm_nodes" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "xlp_socdev_to_node" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! Just check whether CONFIG_SATA_AHCI is defined for this build, and if that is the case, add these objects to the list of built-in object files. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: ganesanr@broadcom.com Cc: jchandra@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/7855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Netlogic: handle modular USB caseFlorian Fainelli1-2/+4
Commit 1004165f346a ("MIPS: Netlogic: USB support for XLP") and then commit 9eac3591e78b ("MIPS: Netlogic: Add support for USB on XLP2xx") added usb-init and usb-init-xlp2 as objects to build when CONFIG_USB is enabled. If CONFIG_USB is made modular, these two files will also get built as modules (obj-m), which will result in the following linking failure: ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/usb-init.ko] undefined! ERROR: "nlm_nodes" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "xlp_socdev_to_node" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! Just check whether CONFIG_USB is defined for this build, and if that is the case, add these objects to the list of built-in object files. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: ganesanr@broadcom.com Cc: jchandra@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/7854/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-22MIPS: Netlogic: Move device-trees to arch/mips/boot/dts/Andrew Bresticker7-436/+4
Move the Netlogic XLP device-trees to arch/mips/boot/dts/ and update the Makefiles accordingly. A built-in device-tree is optional, so select BUILTIN_DTB when it is requested. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7560/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds13-111/+857
Pull MIPS updates from Ralf Baechle: - three fixes for 3.15 that didn't make it in time - limited Octeon 3 support. - paravirtualization support - improvment to platform support for Netlogix SOCs. - add support for powering down the Malta eval board in software - add many instructions to the in-kernel microassembler. - add support for the BPF JIT. - minor cleanups of the BCM47xx code. - large cleanup of math emu code resulting in significant code size reduction, better readability of the code and more accurate emulation. - improvments to the MIPS CPS code. - support C3 power status for the R4k count/compare clock device. - improvments to the GIO support for older SGI workstations. - increase number of supported CPUs to 256; this can be reached on certain embedded multithreaded ccNUMA configurations. - various small cleanups, updates and fixes * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits) MIPS: IP22/IP28: Improve GIO support MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX DEC: Document the R4k MB ASIC mini interrupt controller DEC: Add self as the maintainer MIPS: Add microMIPS MSA support. MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents. MIPS: Replace obsolete strict_strto call with kstrto MIPS: BFP: Simplify code slightly. MIPS: Call find_vma with the mmap_sem held MIPS: Fix 'write_msa_##' inline macro. MIPS: Fix MSA toolchain support detection. mips: Update the email address of Geert Uytterhoeven MIPS: Add minimal defconfig for mips_paravirt MIPS: Enable build for new system 'paravirt' MIPS: paravirt: Add pci controller for virtio MIPS: Add code for new system 'paravirt' MIPS: Add functions for hypervisor call MIPS: OCTEON: Add OCTEON3 to __get_cpu_type MIPS: Add function get_ebase_cpunum MIPS: Add minimal support for OCTEON3 to c-r4k.c ...
2014-05-30MIPS: Netlogic: XLP9XX on-chip SATA supportGanesan Ramalingam2-0/+378
The XLP9XX SoC has an on-chip SATA controller with two ports. Add ahci-init-xlp2.c to initialize the controller, setup the glue logic registers, fixup PCI quirks and setup interrupt ack logic. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6913/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Support for XLP3XX on-chip SATAGanesan Ramalingam2-0/+210
XLP3XX includes an on-chip SATA controller with 4 ports. The controller needs glue logic initialization and PCI fixup before it can be used with the standard AHCI driver. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Add support for XLP5XXYonghong Song4-1/+15
Add support for the XLP5XX processor which is an 8 core variant of the XLP9XX. Add XLP5XX cases to code which earlier handled XLP9XX. Signed-off-by: Yonghong Song <ysong@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6871/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Update XLP9XX/2XX core freq calculationJayachandran C1-18/+65
Calculate XLP 9XX and 2XX core frequency from the per-core PLL. This should give the correct value for all board configurations. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6870/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: PIC freq calculation for XLP 9XX/2XXGanesan Ramalingam2-34/+85
Update PIC frequency calculation for XLP9XX and 2XX processors using the correct PLL registers. This should work for all possible board configurations. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Fix XLP9XX pic entryJayachandran C1-2/+3
Add the compatible property to the PIC entry. Also fix up the nodename to use the correct address. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6869/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Use PRID_IMP_MASK macroJayachandran C4-5/+6
Use PRID_IMP_MASK macro instead of 0xff00 to extract the processor type. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6868/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: IRQ mapping for some more SoC blocksJayachandran C1-28/+56
Add IRQ to IRT (PIC interupt table index) mapping for SATA, GPIO, NAND and SPI interfaces on the XLP SoC. Fix offsets for few blocks and add device IDs for a few blocks. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6911/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Enable access to more than 64GBJayachandran C1-0/+15
The ELPA bit needs to be set in the PAGEGRAIN register to enable access to >64GB physical address. Update reset.S to do this from every hardware thread. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6866/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Reduce size of reset codeJayachandran C2-11/+16
Update thread wakeup function to use scratch registers for saving SP and RA. Move the register restore code needed for thread 0 to the calling function. This reduces the size of code copied to the reset vector. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6910/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Use cpumask_scnprintf for wakeup_maskJayachandran C1-3/+4
Use standard function to print cpumask. Also fixup a typo in the same file. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: g@linux-mips.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6909/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Warn on invalid irqJayachandran C1-0/+2
Warn and return if invalid IRQ is passed to nlm_set_pic_extra_ack. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6862/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-30MIPS: Netlogic: Move coremask setup to nlm_node_initJayachandran C2-4/+2
This is needed for nlm_node_present(0) to work on uniprocessor compile. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6861/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-27MIPS: SMP: Remove plat_smp_ops cpus_done method.Ralf Baechle1-5/+0
Nothing was using the method and there isn't any need for this hook. This leaves smp_cpus_done() empty for the moment. As suggested by Paul Bolle <pebolle@tiscali.nl>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-30of/fdt: consolidate built-in dtb section variablesRob Herring1-1/+1
Unify the various architectures __dtb_start and __dtb_end definitions moving them into of_fdt.h. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: James Hogan <james.hogan@imgtec.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-metag@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux@lists.openrisc.net Cc: linux-xtensa@linux-xtensa.org Tested-by: Grant Likely <grant.likely@linaro.org> Tested-by: Stephen Chivers <schivers@csc.com>
2014-04-30mips: xlp: copy built-in DTB out of init sectionRob Herring1-16/+1
The existing code is buggy because built-in DTBs are in init memory. It is also broken because the reserved bootmem was then freed after unflattening, but the unflattened tree points to data in the flat tree. Fix this by using the unflatten_and_copy_device_tree function. This removes all accesses to FDT header data by the arch code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Tested-by: Grant Likely <grant.likely@linaro.org>
2014-01-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds16-116/+429
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-24mips: delete non-required instances of include <linux/init.h>Paul Gortmaker4-4/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
2014-01-24MIPS: Netlogic: Core wakeup improvementsJayachandran C2-9/+13
Move wakeup to after early console. This will allow us to display error messages when cores are not woken up. Also reduce the wait time for core to come up. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6303/
2014-01-24MIPS: Netlogic: Remove XLR early serial setupJayachandran C2-22/+2
The early serial code is not needed because we already have early printk support provided by common/earlycons.c This change also fixes the following build error that occurs when CONFIG_SERIAL_8250 is not configured for Netlogic XLR boards: arch/mips/built-in.o: In function `nlm_early_serial_setup': setup.c:(.init.text+0x274): undefined reference to `early_serial_setup' make: *** [vmlinux] Error 1 Reported-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6083/
2014-01-24MIPS: Netlogic: Add default DTB for XLP9XX SoCJayachandran C4-1/+92
Add a default device tree fie for XLP9XX boards, and add code to use this device tree if no DTB is passed to the kernel. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6287/
2014-01-24MIPS: Netlogic: XLP9XX PIC OF supportJayachandran C1-6/+31
Support for adding legacy IRQ domain for XLP9XX. The node id of the PIC has to be calulated differently for XLP9XX. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6286/
2014-01-24MIPS: Netlogic: XLP9XX USB supportGanesan Ramalingam2-13/+79
XLP9XX has a USB 3.0 controller on-chip with 2 xHCI ports. The USB block is similar to the one on XLP2XX, so update usb-init-xlp2.c to handle XLP9XX as well. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6285/
2014-01-24MIPS: PCI: Netlogic XLP9XX supportJayachandran C1-0/+5
Add PCI support for Netlogic XLP9XX. The PCI registers and SoC bus numbers have changed in XLP9XX. Also skip a few (bus,dev,fn) combinations which have issues when read. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6284/
2014-01-24MIPS: Netlogic: Add cpu to node mapping for XLP9XXJayachandran C5-9/+16
XLP9XX has 20 cores per node, opposed to 8 on earlier XLP8XX. Update code that calculates node id from cpu id to handle this. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6283/
2014-01-24MIPS: Netlogic: XLP9XX bridge and DRAM codeJayachandran C1-7/+19
Update bridge code. Add code to the XLP9XX registers for DRAM size, limit and node when running on XLPXX Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6282/
2014-01-24MIPS: Netlogic: XLP9XX UART offsetJayachandran C1-0/+2
Update IO offset of the early console UART. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6281/
2014-01-24MIPS: Netlogic: SYS block updates of XLP9XXJayachandran C4-25/+67
Add the SYS block registers for XLP9XX, most of them have changed. The wakeup sequence has been updated to set the coherent mode from the main thread rather than the woken up thread. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6280/
2014-01-24MIPS: Netlogic: XLP9XX PIC updatesJayachandran C2-1/+16
Functions for the XLP9XX interrupt table entry format and other PIC register changes. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6279/
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 18:41:45 +0000