summaryrefslogtreecommitdiff
path: root/arch/mips/netlogic
AgeCommit message (Collapse)AuthorFilesLines
2014-01-24MIPS: Netlogic: update iomap.h for XLP9XXJayachandran C1-0/+4
Most IO block offsets have changed in XLP9XX. Update iomap.h to add the new addresses of different SoC blocks like PIC, SYS, UART etc. that are needed by the base code. On XLP9xx, the SoC blocks of other nodes are seen on a PCI bus corresponding to the node. Update iomap code to reflect this. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6277/
2014-01-24MIPS: Netlogic: Identify XLP 9XX chipJayachandran C1-0/+1
Adds processor ID of XLP 9XX to asm/cpu.h. Update netlogic/xlp-hal/xlp.h to add cpu_is_xlp9xx() and to update cpu_is_xlpii() to support XLP 9XX. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6274/
2014-01-24MIPS: Netlogic: Get coremask from FUSE registerJayachandran C1-5/+24
Use the FUSE register to get the list of active cores in the CPU instead of using the CPU reset register, this is the recommended method. Also add code to mask the coremask with the default number of cores for each processor series. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6275/
2014-01-24MIPS: Netlogic: L1D cacheflush before thread enable on XLPIIYonghong Song1-2/+23
On XLPII CPUs, the L1D cache has to be flushed with regular cache operations before enabling threads in a core. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6276/
2014-01-24MIPS: Netlogic: Some cleanups for assembly codeJayachandran C2-15/+17
No change in logic, the changes are: * cleanup some whitespace and comments * remove confusing argument of SYS_CPU_COHERENT_BASE macro * make the numerical labels in macros consistent Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6273/
2014-01-24MIPS: Netlogic: Add MSI support for XLPJayachandran C2-10/+31
Add MSI chip and MSIX chip definitions. For MSI, we map the link interrupt to a MSI link IRQ which will do a second level of dispatch based on the MSI status register. The MSI chip definitions use the MSI enable register to enable and disable the MSI irqs. For MSI-X, we split the 32 available MSI-X vectors across the four PCIe links (8 each). These PIC interrupts generate an IRQ per link which uses a second level dispatch as well. The MSI-X chip definition uses the standard functions to enable and disable interrupts. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6270/
2013-11-26MIPS: Remove panic_timeout settingsRalf Baechle2-2/+0
Now that we have a CONFIG_PANIC_TIMEOUT=x setting, remove the mips settings. The default is 0, which means don't reboot on panic. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Shinya Kuribayashi <skuribay@pobox.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: benh@kernel.crashing.org Cc: paulus@samba.org Cc: mpe@ellerman.id.au Cc: felipe.contreras@gmail.com Cc: linux-mips@linux-mips.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d19dc75fca343ec5d9ada75a1400f57330021976.1385418410.git.jbaron@akamai.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds2-5/+15
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-11-06MIPS: Netlogic: replace early_init_devtree() callJayachandran C2-5/+15
The early_init_devtree() API was removed in linux-next for 3.13 with commit "mips: use early_init_dt_scan". This causes Netlogic XLP compile to fail: arch/mips/netlogic/xlp/setup.c:101: undefined reference to `early_init_devtree' Add xlp_early_init_devtree() which uses the __dt_setup_arch() to handle early device tree related initialization to fix this. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-10-29MIPS: Panic messages should not end in \n.Ralf Baechle1-1/+1
Panic() is going to add a \n itself and it's annoying if a panic message rolls of the screen on a device with no scrollback. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18MIPS: Cleanup CP0 PRId and CP1 FPIR register access masksMaciej W. Rozycki1-1/+2
Replace hardcoded CP0 PRId and CP1 FPIR register access masks throughout. The change does not touch places that use shifted or partial masks. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: Built-in DTB for XLP2xx SoC boardsGanesan Ramalingam4-1/+135
Add a default built-in device tree for XLP2xx SoC. The new file xlp_fvp.dts has updated entries for I2C and memory. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: Add support for USB on XLP2xxGanesan Ramalingam4-20/+258
Add USB intialization code to handle the new XLP2XX USB 3.0 block. This adds xlp/usb-init-xlp2.c to initialize the XLP2XX USB glue-logic for XHCI and EHCI. Interrupt and IO offset code in xlp-hal/iomap.h and xlp/nlm_hal.c is also updated for the new USB block. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5744/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: XLP2xx update for I2C controllerGanesan Ramalingam1-7/+16
XLP2xx has a new I2C controller which has 4 buses connected to it. Update the IO offset and IRQ mapping code to reflect this. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: Core wakeup changes for XLP2XXJayachandran C1-4/+6
On XLP2xx, wakeup code does not need to enable clock on the core. Update xlp/wakeup.c to handle this. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: XLP2XX CPU and PIC frequencyGanesan Ramalingam2-9/+117
Add code to calculate the CPU and PIC frequency for XLP2XX SoCs. Since the PIC frequency on XLP2XX can be configured, add a new macro pic_timer_freq() to be used in netlogic/common/time.c. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: Ganesan Ramalingam <ganesanr@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/5701/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: Call xlp_mmu_init on all threadsJayachandran C1-3/+1
The config7/config4 register has to be written on all the threads. This does not cause any problems in XLP, but is needed for XLPII Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: Add support for XLP2XXJayachandran C1-7/+20
XLP2XX is first in the series of 28nm XLPII processors. The changes are to: * Add processor ID for XLP2XX to asm/cpu.h and kernel/cpu-probe.c. * Add a cpu_is_xlpii() function to check for XLPII processors. * Update xlp_mmu_init() to use config4 to enable extended TLB. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5698/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: Fix DT flash size parameterJayachandran C2-2/+2
The flash chipselects can span 32MB, fix this in the built-in device tree. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: Remove memory section from built-in DTJayachandran C2-14/+0
Do not pass a memory section in the built-in DTB, and let the boot code use the values from the DRAM BARs. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-03MIPS: Netlogic: Read memory from DRAM BARsJayachandran C2-0/+58
Read the memory from the Bridge DRAM BARs, if it is not passed in from the device tree. This will allow us to remove memory configuration from built in device trees. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5743/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-26MIPS:Netlogic: Remove redundant value in operation.Alexandru Juncu1-2/+1
Removed parameters checked twice in logical OR operation. Suggested by coccinelle and manually verified. Signed-off-by: Alexandru Juncu <alexj@rosedu.org> Cc: jchandra@broadcom.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5627/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds4-14/+62
Pull MIPS fixes from Ralf Baechle: "MIPS fixes for 3.11. Half of then is for Netlogic the remainder touches things across arch/mips. Nothing really dramatic and by rc1 standards MIPS will be in fairly good shape with this applied. Tested by building all MIPS defconfigs of which with this pull request four platforms won't build. And yes, it boots also on my favorite test systems" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION MIPS: Octeon: Fix DT pruning bug with pip ports MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP MIPS: tlbex: fix broken build in v3.11-rc1 MIPS: Netlogic: Add XLP PIC irqdomain MIPS: Netlogic: Fix USB block's coherent DMA mask MIPS: tlbex: Fix typo in r3000 tlb store handler MIPS: BMIPS: Fix thinko to release slave TP from reset MIPS: Delete dead invocation of exception_exit().
2013-07-19MIPS: Netlogic: Add XLP PIC irqdomainJayachandran C3-13/+61
Add a legacy irq domain for the XLP PIC interrupts. This will be used when interrupts are assigned from the device tree. This change is required after commit c5cdc67 "irqdomain: Remove temporary MIPS workaround code". Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: Jayachandran C <jchandra@broadcom.com> Patchwork: https://patchwork.linux-mips.org/patch/5597/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: Netlogic: Fix USB block's coherent DMA maskGanesan Ramalingam1-1/+1
The on-chip USB controller on Netlogic XLP does not suppport DMA beyond 32-bit physical address. Set the coherent_dma_mask of the USB in its PCI fixup to support this. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5596/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-14MIPS: Delete __cpuinit/__CPUINIT usage from MIPS codePaul Gortmaker4-8/+4
commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: Fix plat_irq_dispatchJayachandran C1-4/+3
Fix an issue in plat_irq_dispatch due to which it can call do_IRQ with a PIC irq that is not mapped. When a per-cpu interrupt and a PIC interrupt are both active, the check 'eirr & PERCPU_IRQ_MASK' will be true, but the interrupt in 'i' will be the number of the PIC interrupt. In this case, we will call do_IRQ on the PIC interrupt without mapping it with nlm_irq_to_xirq(). Fix this by using __ffs64 instead of __ilog2_u64 and using the interrupt number instead of mask to identify per-cpu interrupts. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5432/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: Remove workarounds for early SoCsJayachandran C1-22/+1
The XLPs in production do not need these workarounds. Remove the code and the associated ifdef. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5430/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: Fixup memory regions for prefetchJayachandran C1-0/+13
Fix a cache error found in stress test, caused by the prefetch instruction going beyond valid memory when acessing the last page of a region. Add the pref_backup logic similar to XLR in XLP too. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5431/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: wait for all hardware threadsJayachandran C1-7/+20
Earlier we just waited for the first thread of the CPU to come online before proceeding to wake up others. Update it to wait for all the CPUs in the core. This will be useful when the boot-up is slow, like while debugging or when running in a simulator. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5429/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: use branch instead of jumpJayachandran C2-2/+2
Fix an issue in the reset code. Since this code is copied to the reset vector, using 'j' for looping is not correct. Use relative branch 'b'. Update the usage of 'j' in smpboot.S to be consistent although it is not a bug there. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5427/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: move cpu_ready array to boot areaJayachandran C7-9/+16
Move the nlm_cpu_ready[] array used by the cpu wakeup code to the boot area, along with rest of the boot parameter code. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5425/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: Add nlm_get_boot_data() helperJayachandran C1-3/+3
This moves the calculation and casting needed to access the CPU initialization data to a function nlm_get_boot_data() Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5426/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: Initialization when !CONFIG_SMPJayachandran C5-8/+16
The core initialization and reset vector setup needs to be done even when booting uniprocessor. Move this code from smp.c to setup.c Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5428/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: Split reset code out of smpboot.SJayachandran C4-187/+252
The reset and core initialization code should be available for uniprocessor as well. This changes is just to take out the code into a different file, without any change to the logic. The change for uniprocessor initialization code is in a later patch. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5423/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: Split XLP device tree code to dt.cJayachandran C3-70/+104
Create new flle arch/mips/netlogic/xlp/dt.c and move the device tree related code there. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5422/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: COP2 save/restore codeJayachandran C2-1/+119
Add COP2 register state structure and functions for Netlogic XLP. The RX and TX buffers and status registers are to be saved. Since the registers are 64-bit, do the implementation in inline assembly which works on both 32-bit and 64-bit kernels. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: ddaney.cavm@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/5413/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: rename nlm_cop2_save/restoreJayachandran C1-8/+8
Rename macro nlm_cop2_enable() to nlm_cop2_enable_irqsave() and the macro nlm_cop2_restore to nlm_cop2_disable_irqrestore(). The new names will reflect the functionality better, and will make nlm_cop2_restore() available to be used later in COP2 save/restore patch. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: ddaney.cavm@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/5412/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: Fix nlm_read_c2_status() definitionJayachandran C1-1/+1
The sel argument os nlm_read_c2_status() was not used and the macro returned the sel 0 in all cases. Fix this by defining two macros: nlm_read_c2_status0() and nlm_read_c2_status1() to return the two status registers. Add functions to write to the status registers as well. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: ddaney.cavm@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/5414/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-13MIPS: Netlogic: SWIOTLB dma ops for 32-bit DMAGanesan Ramalingam3-0/+119
Add SWIOTLB config option and related files to Netlogic platform. Some XLP SoC components like the SD/MMC interface cannot do DMA beyond 32-bit physical address. The SD/MMC driver can use memory outside this range for IO, to support this we have to add bounce buffers implemented by SWIOTLB. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: Ganesan Ramalingam <ganesanr@broadcom.com> Patchwork: https://patchwork.linux-mips.org/patch/5410/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-22MIPS: Idle: Consolidate all declarations in <asm/idle.h>.Ralf Baechle2-0/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: Netlogic: Merge platform usb.h to usb-init.cJayachandran C1-13/+36
The definitions are not used anywhere else, and merging it will make adding the new USB definitions for XLPII series easier. While there, cleanup some whitespace in usb-init.c. There is no change to logic due to this commit. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/5027/ Acked-by: John Crispin <blogic@openwrt.org>
2013-05-08MIPS: Netlogic: Support for multiple built-in device treesJayachandran C5-8/+158
This enables us to have a default device tree per SoC family to be built into the kernel. The default device tree for XLP3xx has been added as part of this change. Later this can be used to provide support default boards for XLP2xx and XLP9xx SoCs. Kconfig options are provided for each default device tree so that just the needed ones can be selected to be built into the kernel. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/5023/ Acked-by: John Crispin <blogic@openwrt.org>
2013-05-08MIPS: Netlogic: Avoid using fixed PIC IRT indexJayachandran C1-22/+40
The index for a device interrupt in the PIC interrupt routing table changes for different chips in the XLP family. Avoid using the fixed entries and derive the index value from the SoC device header. Add workarounds for some devices which do not report the IRT index correctly. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/5025/ Acked-by: John Crispin <blogic@openwrt.org>
2013-05-08MIPS: Netlogic: print cpumask with cpumask_scnprintfJayachandran C1-9/+12
Use standard function to print cpumask. Also fixup the name of the variable used and make it static. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/5024/ Acked-by: John Crispin <blogic@openwrt.org>
2013-02-21Merge branch 'mips-next-3.9' of ↵Ralf Baechle8-41/+111
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-02-17MIPS: Netlogic: Fix for quad-XLP bootJayachandran C1-10/+25
On multi-chip boards, the first core on slave SoCs may take much more time to wakeup. Add code to wait for the core to come up before proceeding with the rest of the boot up. Update xlp_wakeup_core to also skip the boot node and the boot CPU initialization which is already complete. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4783/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: use preset loops per jiffyJayachandran C1-0/+4
Doing calibrate delay on a hardware thread will be inaccurate since it depends on the load on other threads in the core. It will also slow down the boot process when done for 128 hardware threads. Switch to a pre-computed loops per jiffy based on the core frequency. The value is computed based on the core frequency and roughly matches the value calculated by calibrate_delay(). Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4791/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Use PIC timer as a clocksourceJayachandran C4-3/+55
The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC frequencey. One of these can be used as a clocksource to provide timestamps that is common across cores. This can be used in place of the count/compare clocksource which is per-CPU. On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits of the PIC counter. On XLP, the whole 64-bit can be used. Provide common macros and functions for PIC timer registers on XLR/XLS and XLP, and use them to register a PIC clocksource. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4786/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Split XLP L1 i-cache among threadsJayachandran C1-0/+6
Since we now use r4k cache code for Netlogic XLP, it is better to split L1 icache among the active threads, so that threads won't step on each other while flushing icache. The L1 dcache is already split among the threads in the core. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4787/ Signed-off-by: John Crispin <blogic@openwrt.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 22:16:02 +0000