| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
paravirtualize mov reg = ar.itc.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
paravirtualize fsys.S.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Add two hooks, paravirt_get_fsyscall_table() and
paravirt_get_fsys_bubble_doen() to paravirtualize fsyscall implementation.
This patch just add the hooks fsyscall and don't paravirtualize it.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Conflicts:
arch/ia64/kernel/mca.c
|
|
|
|
The sys_getpid() and sys_set_tid_address() behavior changed from
return current->tgid
to
struct pid *pid;
pid = current->pids[PIDTYPE_PID].pid;
return pid->numbers[pid->level].nr;
But the fast system calls on ia64 still operate the old way. Patch them
appropriately to let ia64 work with pid namespaces. Besides, this is one more
step in deprecating of pid and tgid on task_struct.
The fsys_getppid() is to be patched as well, but its logic is much
more complex now, so I will make it later.
One thing I'm not 100% sure is the trick with the IA64_UPID_SHIFT. On order
to access the pid->level's element of an array I have to perform the following
calculations
pid + sizeof(struct upid) * pid->level
The problem is that ia64 can only multiply float point registers, while all
the offsets I have in code are in rXX ones. Fortunately, the sizeof(struct
upid) is 32 bytes on ia64 (and is very unlikely to ever change), so the
calculations get simpler:
pid + pid->level << 5
So, I introduce the IA64_UPID_SHIFT and use the shl instruction. I also
looked at how gcc compiles the similar place and found that it makes it with
shift as well. Is this OK to do so?
Tested with ski emulator with 2.6.24 kernel, but fits 2.6.25-rc4 and
2.6.25-rc4-mm1 as well.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: David Mosberger-Tang <davidm@hpl.hp.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This patch does:
- Remove outdated comments (which someday I marked with "?").
- Reassemble instructions to fit them in fewer bundles.
- If McKinley Errata 9 workaround is not needed, the workaround
bundles will be patched out with NOPs. However it also not
needed to have a totally NOP bundle (nop * 3) before branch.
As a result, this makes the code path 3 (or 2) bundles shorter
(and remove 1 unnecessary stop bit). It seems to be 1% faster.
(10sec loop test, with nojitter @ Madison 1.5GHz x 4)
Before:
CPU 0: 0.14 (usecs) (0 errors / 69598875 iterations)
CPU 1: 0.14 (usecs) (0 errors / 69630721 iterations)
CPU 2: 0.14 (usecs) (0 errors / 69607850 iterations)
CPU 3: 0.14 (usecs) (0 errors / 69619832 iterations)
After:
CPU 0: 0.14 (usecs) (0 errors / 70257728 iterations)
CPU 1: 0.14 (usecs) (0 errors / 70309498 iterations)
CPU 2: 0.14 (usecs) (0 errors / 70280639 iterations)
CPU 3: 0.14 (usecs) (0 errors / 70260682 iterations)
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This patch implements VIRT_CPU_ACCOUNTING for ia64,
which enable us to use more accurate cpu time accounting.
The VIRT_CPU_ACCOUNTING is an item of kernel config, which s390
and powerpc arch have. By turning this config on, these archs
change the mechanism of cpu time accounting from tick-sampling
based one to state-transition based one.
The state-transition based accounting is done by checking time
(cycle counter in processor) at every state-transition point,
such as entrance/exit of kernel, interrupt, softirq etc.
The difference between point to point is the actual time consumed
during in the state. There is no doubt about that this value is
more accurate than that of tick-sampling based accounting.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This is a merge of Peter Keilty's initial patch (which was
revived by Bob Picco) for this with Hidetoshi Seto's fixes
and scaling improvements.
Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The ".acq" semantics of the load only apply w.r.t. other data access.
Reading the clock (ar.itc) isn't a data access so strange things can
happen here. Specifically the read of ar.itc can be launched as soon
as the read of xtime_lock.sequence is ISSUED. Since this may cache
miss, and that might cause a thread switch, and there may be cache
contention for the line containing xtime_lock, it may be a long time
before the actual value is returned, so the ar.itc value may be very
stale.
Move the consumption of r28 up before the read of ar.itc to make sure
that we really have got the current value of xtime_lock.sequence
before look at ar.itc.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
On 1.6GHz Montectio Tiger4, the following performance data is measured with
kernel built with defconfig which has NUMA configured:
Fastest sys_getcpu: 502 itc counts.
Fastest fsys_getcpu: 28 itc counts.
fsys_getcpu performance is largly impacted by whether data (node_to_cpu_map
etc) is in cache. It can take fsys_getcpu up to ~150 itc counts in cold
cache case.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
beautify coding style for zeroing end of fsyscall_table entries.
Remove misleading __NR_syscall_last and add more comments.
Drop (now unneeded) "guard against failure to increase NR_syscalls"
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Wire up the ia64 syscalls for *at() functions.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
When this new syscall was added to ia64 in commit
39743889aaf76725152f16aa90ca3c45f6d52da3
fsys.S was forgotten. Add a ".data8 0" there to keep
it in step. [Reported by Stephane Eranian]
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Delete obsolete stuff from arch Makefile
Rename file to asm-offsets.h
The trick used in the arch Makefile to circumvent the circular
dependency is kept.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
|
|
current->blocked will be set to the value of current->thread_info->flags if the
cmpxchg to update thread_info->flags fails. For performance reasons the store into
current->blocked was placed in the cmpxchg loop. However, the cmpxchg overwrites the
register holding the value to be stored. In the rare case of a retry the value of
thread_info->flags will be written into current->blocked.
The fix is to use another register so that the register containing the current->blocked
value is not overwritten.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Attached is a patch against David's audit.17 kernel that adds checks
for the TIF_SYSCALL_AUDIT thread flag to the ia64 system call and
signal handling code paths.The patch enables auditing of system
calls set up via fsys_bubble_down, as well as ensuring that
audit_syscall_exit() is called on return from sigreturn.
Neglecting to check for TIF_SYSCALL_AUDIT at these points results in
incorrect information in audit_context, causing frequent system panics
when system call auditing is enabled on an ia64 system.
Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
|
This patch changes comments & formatting only. There is no code
change.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Improvements come from eliminating srlz.i, not scheduling AR/CR-reads
too early (while there are others still pending), scheduling the
backing-store switch as well as possible, splitting the BBB bundle
into a MIB/MBB pair.
Why is it safe to eliminate the srlz.i? Observe
that we used to clear bits ~PSR_PRESERVED_BITS in PSR.L. Since
PSR_PRESERVED_BITS==PSR.{UP,MFL,MFH,PK,DT,PP,SP,RT,IC}, we
ended up clearing PSR.{BE,AC,I,DFL,DFH,DI,DB,SI,TB}. However,
PSR.BE : already is turned off in __kernel_syscall_via_epc()
PSR.AC : don't care (kernel normally turns PSR.AC on)
PSR.I : already turned off by the time fsys_bubble_down gets invoked
PSR.DFL: always 0 (kernel never turns it on)
PSR.DFH: don't care --- kernel never touches f32-f127 on its own
initiative
PSR.DI : always 0 (kernel never turns it on)
PSR.SI : always 0 (kernel never turns it on)
PSR.DB : don't care --- kernel never enables kernel-level breakpoints
PSR.TB : must be 0 already; if it wasn't zero on entry to
__kernel_syscall_via_epc, the branch to fsys_bubble_down
will trigger a taken branch; the taken-trap-handler then
converts the syscall into a break-based system-call.
In other words: all the bits we're clearying are either 0 already or
are don't cares! Thus, we don't have to write PSR.L at all and we
don't have to do a srlz.i either.
Good for another ~20 cycle improvement for EPC-based heavy-weight
syscalls.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|
