summaryrefslogtreecommitdiff
path: root/arch/arm/xen
AgeCommit message (Collapse)AuthorFilesLines
2024-07-11xen/arm: Convert comma to semicolonChen Ni1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <20240710014208.1719662-1-nichen@iscas.ac.cn> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-11-23arm/xen: fix xen_vcpu_info allocation alignmentStefano Stabellini1-1/+2
xen_vcpu_info is a percpu area than needs to be mapped by Xen. Currently, it could cross a page boundary resulting in Xen being unable to map it: [ 0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164! [ 0.574002] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Fix the issue by using __alloc_percpu and requesting alignment for the memory allocation. Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop Fixes: 24d5373dda7c ("arm/xen: Use alloc_percpu rather than __alloc_percpu") Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-10-16arm64/arm: xen: enlighten: Fix KPTI checksMark Rutland1-9/+16
When KPTI is in use, we cannot register a runstate region as XEN requires that this is always a valid VA, which we cannot guarantee. Due to this, xen_starting_cpu() must avoid registering each CPU's runstate region, and xen_guest_init() must avoid setting up features that depend upon it. We tried to ensure that in commit: f88af7229f6f22ce (" xen/arm: do not setup the runstate info page if kpti is enabled") ... where we added checks for xen_kernel_unmapped_at_usr(), which wraps arm64_kernel_unmapped_at_el0() on arm64 and is always false on 32-bit arm. Unfortunately, as xen_guest_init() is an early_initcall, this happens before secondary CPUs are booted and arm64 has finalized the ARM64_UNMAP_KERNEL_AT_EL0 cpucap which backs arm64_kernel_unmapped_at_el0(), and so this can subsequently be set as secondary CPUs are onlined. On a big.LITTLE system where the boot CPU does not require KPTI but some secondary CPUs do, this will result in xen_guest_init() intializing features that depend on the runstate region, and xen_starting_cpu() registering the runstate region on some CPUs before KPTI is subsequent enabled, resulting the the problems the aforementioned commit tried to avoid. Handle this more robsutly by deferring the initialization of the runstate region until secondary CPUs have been initialized and the ARM64_UNMAP_KERNEL_AT_EL0 cpucap has been finalized. The per-cpu work is moved into a new hotplug starting function which is registered later when we're certain that KPTI will not be used. Fixes: f88af7229f6f ("xen/arm: do not setup the runstate info page if kpti is enabled") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Bertrand Marquis <bertrand.marquis@arm.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-09-19xen: simplify evtchn_do_upcall() call mazeJuergen Gross1-1/+1
There are several functions involved for performing the functionality of evtchn_do_upcall(): - __xen_evtchn_do_upcall() doing the real work - xen_hvm_evtchn_do_upcall() just being a wrapper for __xen_evtchn_do_upcall(), exposed for external callers - xen_evtchn_do_upcall() calling __xen_evtchn_do_upcall(), too, but without any user Simplify this maze by: - removing the unused xen_evtchn_do_upcall() - removing xen_hvm_evtchn_do_upcall() as the only left caller of __xen_evtchn_do_upcall(), while renaming __xen_evtchn_do_upcall() to xen_evtchn_do_upcall() Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-08-01swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocatedPetr Tesarik1-6/+4
If swiotlb is allocated, immediately return 0, so callers do not have to check io_tlb_default_mem.nslabs explicitly. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-12-05xen/virtio: Optimize the setup of "xen-grant-dma" devicesOleksandr Tyshchenko1-1/+1
This is needed to avoid having to parse the same device-tree several times for a given device. For this to work we need to install the xen_virtio_restricted_mem_acc callback in Arm's xen_guest_init() which is same callback as x86's PV and HVM modes already use and remove the manual assignment in xen_setup_dma_ops(). Also we need to split the code to initialize backend_domid into a separate function. Prior to current patch we parsed the device-tree three times: 1. xen_setup_dma_ops()->...->xen_is_dt_grant_dma_device() 2. xen_setup_dma_ops()->...->xen_dt_grant_init_backend_domid() 3. xen_virtio_mem_acc()->...->xen_is_dt_grant_dma_device() With current patch we parse the device-tree only once in xen_virtio_restricted_mem_acc()->...->xen_dt_grant_init_backend_domid() Other benefits are: - Not diverge from x86 when setting up Xen grant DMA ops - Drop several global functions Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20221025162004.8501-2-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-01xen: don't require virtio with grants for non-PV guestsJuergen Gross1-1/+3
Commit fa1f57421e0b ("xen/virtio: Enable restricted memory access using Xen grant mappings") introduced a new requirement for using virtio devices: the backend now needs to support the VIRTIO_F_ACCESS_PLATFORM feature. This is an undue requirement for non-PV guests, as those can be operated with existing backends without any problem, as long as those backends are running in dom0. Per default allow virtio devices without grant support for non-PV guests. On Arm require VIRTIO_F_ACCESS_PLATFORM for devices having been listed in the device tree to use grants. Add a new config item to always force use of grants for virtio. Fixes: fa1f57421e0b ("xen/virtio: Enable restricted memory access using Xen grant mappings") Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220622063838.8854-4-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-07-01xen/arm: Fix race in RB-tree based P2M accountingOleksandr Tyshchenko1-2/+4
During the PV driver life cycle the mappings are added to the RB-tree by set_foreign_p2m_mapping(), which is called from gnttab_map_refs() and are removed by clear_foreign_p2m_mapping() which is called from gnttab_unmap_refs(). As both functions end up calling __set_phys_to_machine_multi() which updates the RB-tree, this function can be called concurrently. There is already a "p2m_lock" to protect against concurrent accesses, but the problem is that the first read of "phys_to_mach.rb_node" in __set_phys_to_machine_multi() is not covered by it, so this might lead to the incorrect mappings update (removing in our case) in RB-tree. In my environment the related issue happens rarely and only when PV net backend is running, the xen_add_phys_to_mach_entry() claims that it cannot add new pfn <-> mfn mapping to the tree since it is already exists which results in a failure when mapping foreign pages. But there might be other bad consequences related to the non-protected root reads such use-after-free, etc. While at it, also fix the similar usage in __pfn_to_mfn(), so initialize "struct rb_node *n" with the "p2m_lock" held in both functions to avoid possible bad consequences. This is CVE-2022-33744 / XSA-406. Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06xen/virtio: Enable restricted memory access using Xen grant mappingsJuergen Gross1-0/+2
In order to support virtio in Xen guests add a config option XEN_VIRTIO enabling the user to specify whether in all Xen guests virtio should be able to access memory via Xen grant mappings only on the host side. Also set PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS feature from the guest initialization code on Arm and x86 if CONFIG_XEN_VIRTIO is enabled. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/1654197833-25362-5-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-25Merge tag 'dma-mapping-5.19-2022-05-25' of ↵Linus Torvalds1-27/+11
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - don't over-decrypt memory (Robin Murphy) - takes min align mask into account for the swiotlb max mapping size (Tianyu Lan) - use GFP_ATOMIC in dma-debug (Mikulas Patocka) - fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me) - don't fail on highmem CMA pages in dma_direct_alloc_pages (me) - cleanup swiotlb initialization and share more code with swiotlb-xen (me, Stefano Stabellini) * tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits) dma-direct: don't over-decrypt memory swiotlb: max mapping size takes min align mask into account swiotlb: use the right nslabs-derived sizes in swiotlb_init_late swiotlb: use the right nslabs value in swiotlb_init_remap swiotlb: don't panic when the swiotlb buffer can't be allocated dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm x86: remove cruft from <asm/dma-mapping.h> swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl swiotlb: merge swiotlb-xen initialization into swiotlb swiotlb: provide swiotlb_init variants that remap the buffer swiotlb: pass a gfp_mask argument to swiotlb_init_late swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction swiotlb: make the swiotlb_init interface more useful x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled x86: remove the IOMMU table infrastructure MIPS/octeon: use swiotlb_init instead of open coding it arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region swiotlb: rename swiotlb_late_init_with_default_size ...
2022-05-11swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on armChristoph Hellwig1-14/+0
swiotlb-xen uses very different ways to allocate coherent memory on x86 vs arm. On the former it allocates memory from the page allocator, while on the later it reuses the dma-direct allocator the handles the complexities of non-coherent DMA on arm platforms. Unfortunately the complexities of trying to deal with the two cases in the swiotlb-xen.c code lead to a bug in the handling of DMA_ATTR_NO_KERNEL_MAPPING on arm. With the DMA_ATTR_NO_KERNEL_MAPPING flag the coherent memory allocator does not actually allocate coherent memory, but just a DMA handle for some memory that is DMA addressable by the device, but which does not have to have a kernel mapping. Thus dereferencing the return value will lead to kernel crashed and memory corruption. Fix this by using the dma-direct allocator directly for arm, which works perfectly fine because on arm swiotlb-xen is only used when the domain is 1:1 mapped, and then simplifying the remaining code to only cater for the x86 case with DMA coherent device. Reported-by: Rahul Singh <Rahul.Singh@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rahul Singh <rahul.singh@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Tested-by: Rahul Singh <rahul.singh@arm.com>
2022-04-22arm/xen: Fix some refcount leaksMiaoqian Lin1-2/+7
The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: 9b08aaa3199a ("ARM: XEN: Move xen_early_init() before efi_init()") Fixes: b2371587fe0c ("arm/xen: Read extended regions from DT and init Xen resource") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
2022-04-18swiotlb: merge swiotlb-xen initialization into swiotlbChristoph Hellwig1-10/+11
Reuse the generic swiotlb initialization for xen-swiotlb. For ARM/ARM64 this works trivially, while for x86 xen_swiotlb_fixup needs to be passed as the remap argument to swiotlb_init_remap/swiotlb_init_late. Note that the lower bound of the swiotlb size is changed to the smaller IO_TLB_MIN_SLABS based value with this patch, but that is fine as the 2MB value used in Xen before was just an optimization and is not the hard lower bound. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2022-04-18arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_regionStefano Stabellini1-4/+1
It used to be that Linux enabled swiotlb-xen when running a dom0 on ARM. Since f5079a9a2a31 "xen/arm: introduce XENFEAT_direct_mapped and XENFEAT_not_direct_mapped", Linux detects whether to enable or disable swiotlb-xen based on the new feature flags: XENFEAT_direct_mapped and XENFEAT_not_direct_mapped. However, there is still a leftover xen_initial_domain() check in xen_create_contiguous_region. Remove the check as xen_create_contiguous_region is only called by swiotlb-xen during initialization. If xen_create_contiguous_region is called, we know Linux is running 1:1 mapped so there is no need for additional checks. Also update the in-code comment. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2022-01-06arm/xen: Read extended regions from DT and init Xen resourceOleksandr Tyshchenko1-0/+106
This patch implements arch_xen_unpopulated_init() on Arm where the extended regions (if any) are gathered from DT and inserted into specific Xen resource to be used as unused address space for Xen scratch pages by unpopulated-alloc code. The extended region (safe range) is a region of guest physical address space which is unused and could be safely used to create grant/foreign mappings instead of wasting real RAM pages from the domain memory for establishing these mappings. The extended regions are chosen by the hypervisor at the domain creation time and advertised to it via "reg" property under hypervisor node in the guest device-tree. As region 0 is reserved for grant table space (always present), the indexes for extended regions are 1...N. If arch_xen_unpopulated_init() fails for some reason the default behaviour will be restored (allocate xenballooned pages). This patch also removes XEN_UNPOPULATED_ALLOC dependency on x86. Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/1639080336-26573-6-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-01-06arm/xen: Switch to use gnttab_setup_auto_xlat_frames() for DTOleksandr Tyshchenko1-6/+20
Read the start address of the grant table space from DT (region 0). This patch mostly restores behaviour before commit 3cf4095d7446 ("arm/xen: Use xen_xlate_map_ballooned_pages to setup grant table") but trying not to break the ACPI support added after that commit. So the patch touches DT part only and leaves the ACPI part with xen_xlate_map_ballooned_pages(). Also in order to make a code more resilient use a fallback to xen_xlate_map_ballooned_pages() if grant table region wasn't found. This is a preparation for using Xen extended region feature where unused regions of guest physical address space (provided by the hypervisor) will be used to create grant/foreign/whatever mappings instead of wasting real RAM pages from the domain memory for establishing these mappings. The immediate benefit of this change: - Avoid superpage shattering in Xen P2M when establishing stage-2 mapping (GFN <-> MFN) for the grant table space - Avoid wasting real RAM pages (reducing the amount of memory usuable) for mapping grant table space - The grant table space is always mapped at the exact same place (region 0 is reserved for the grant table) Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/1639080336-26573-3-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-11-02xen: allow pv-only hypercalls only with CONFIG_XEN_PVJuergen Gross2-2/+0
Put the definitions of the hypercalls usable only by pv guests inside CONFIG_XEN_PV sections. On Arm two dummy functions related to pv hypercalls can be removed. While at it remove the no longer supported tmem hypercall definition. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211028081221.2475-3-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-07-06Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-2/+10
Pull ARM development updates from Russell King: - Make it clear __swp_entry_to_pte() uses PTE_TYPE_FAULT - Updates for setting vmalloc size via command line to resolve an issue with the 8MiB hole not properly being accounted for, and clean up the code. - ftrace support for module PLTs - Spelling fixes - kbuild updates for removing generated files and pattern rules for generating files - Clang/llvm updates - Change the way the kernel is mapped, placing it in vmalloc space instead. - Remove arm_pm_restart from arm and aarch64. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (29 commits) ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE ARM: 9097/1: mmu: Declare section start/end correctly ARM: 9096/1: Remove arm_pm_restart() ARM: 9095/1: ARM64: Remove arm_pm_restart() ARM: 9094/1: Register with kernel restart handler ARM: 9093/1: drivers: firmwapsci: Register with kernel restart handler ARM: 9092/1: xen: Register with kernel restart handler ARM: 9091/1: Revert "mm: qsd8x50: Fix incorrect permission faults" ARM: 9090/1: Map the lowmem and kernel separately ARM: 9089/1: Define kernel physical section start and end ARM: 9088/1: Split KERNEL_OFFSET from PAGE_OFFSET ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1 ARM: 9086/1: syscalls: use pattern rules to generate syscall headers ARM: 9085/1: remove unneeded abi parameter to syscallnr.sh ARM: 9084/1: simplify the build rule of mach-types.h ARM: 9083/1: uncompress: atags_to_fdt: Spelling s/REturn/Return/ ARM: 9082/1: [v2] mark prepare_page_table as __init ARM: 9079/1: ftrace: Add MODULE_PLTS support ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link() ARM: 9077/1: PLT: Move struct plt_entries definition to header ...
2021-06-13ARM: 9092/1: xen: Register with kernel restart handlerGuenter Roeck1-2/+10
Register with kernel restart handler instead of setting arm_pm_restart directly. Select a high priority of 192 to ensure that default restart handlers are replaced if Xen is running. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-05-14xen/swiotlb: check if the swiotlb has already been initializedStefano Stabellini1-1/+7
xen_swiotlb_init calls swiotlb_late_init_with_tbl, which fails with -ENOMEM if the swiotlb has already been initialized. Add an explicit check io_tlb_default_mem != NULL at the beginning of xen_swiotlb_init. If the swiotlb is already initialized print a warning and return -EEXIST. On x86, the error propagates. On ARM, we don't actually need a special swiotlb buffer (yet), any buffer would do. So ignore the error and continue. CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210512201823.1963-3-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-05-14xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.hStefano Stabellini1-12/+0
Move xen_swiotlb_detect to a static inline function to make it available to !CONFIG_XEN builds. CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210512201823.1963-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-05-04Merge branch 'stable/for-linus-5.13' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Christoph Hellwig has taken a cleaver and trimmed off the not-needed code and nicely folded duplicate code in the generic framework. This lays the groundwork for more work to add extra DMA-backend-ish in the future. Along with that some bug-fixes to make this a nice working package" * 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: don't override user specified size in swiotlb_adjust_size swiotlb: Fix the type of index swiotlb: Make SWIOTLB_NO_FORCE perform no allocation ARM: Qualify enabling of swiotlb_init() swiotlb: remove swiotlb_nr_tbl swiotlb: dynamically allocate io_tlb_default_mem swiotlb: move global variables into a new io_tlb_mem structure xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup xen-swiotlb: split xen_swiotlb_init swiotlb: lift the double initialization protection from xen-swiotlb xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs xen-swiotlb: remove xen_set_nslabs xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer swiotlb: split swiotlb_tbl_sync_single swiotlb: move orig addr and size validation into swiotlb_bounce swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single powerpc/svm: stop using io_tlb_start
2021-04-23xen/arm: introduce XENFEAT_direct_mapped and XENFEAT_not_direct_mappedStefano Stabellini1-1/+13
Newer Xen versions expose two Xen feature flags to tell us if the domain is directly mapped or not. Only when a domain is directly mapped it makes sense to enable swiotlb-xen on ARM. Introduce a function on ARM to check the new Xen feature flags and also to deal with the legacy case. Call the function xen_swiotlb_detect. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210319200140.12512-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-03-17xen-swiotlb: split xen_swiotlb_initChristoph Hellwig1-1/+1
Split xen_swiotlb_init into a normal an an early case. That makes both much simpler and more readable, and also allows marking the early code as __init and x86-only. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-03-10Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF}Jan Beulich1-1/+2
It's not helpful if every driver has to cook its own. Generalize xenbus'es INVALID_GRANT_HANDLE and pcifront's INVALID_GRANT_REF (which shouldn't have expanded to zero to begin with). Use the constants in p2m.c and gntdev.c right away, and update field types where necessary so they would match with the constants' types (albeit without touching struct ioctl_gntdev_grant_ref's ref field, as that's part of the public interface of the kernel and would require introducing a dependency on Xen's grant_table.h public header). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/db7c38a5-0d75-d5d1-19de-e5fe9f0b9c48@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-03-10Xen: drop exports of {set,clear}_foreign_p2m_mapping()Jan Beulich1-2/+0
They're only used internally, and the layering violation they contain (x86) or imply (Arm) of calling HYPERVISOR_grant_table_op() strongly advise against any (uncontrolled) use from a module. The functions also never had users except the ones from drivers/xen/grant-table.c forever since their introduction in 3.15. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/746a5cd6-1446-eda4-8b23-03c1cac30b8d@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-03-03Xen/gnttab: handle p2m update errors on a per-slot basisJan Beulich1-4/+31
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating error leaves the full batch in an ambiguous state as far as the caller is concerned. Instead flags respective slots as bad, unmapping what was mapped there right away. HYPERVISOR_grant_table_op()'s return value and the individual unmap slots' status fields get used only for a one-time - there's not much we can do in case of a failure. Note that there's no GNTST_enomem or alike, so GNTST_general_error gets used. The map ops' handle fields get overwritten just to be on the safe side. This is part of XSA-367. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15xen/arm: don't ignore return errors from set_phys_to_machineStefano Stabellini1-2/+4
set_phys_to_machine can fail due to lack of memory, see the kzalloc call in arch/arm/xen/p2m.c:__set_phys_to_machine_multi. Don't ignore the potential return error in set_foreign_p2m_mapping, returning it to the caller instead. This is part of XSA-361. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Cc: stable@vger.kernel.org Reviewed-by: Julien Grall <jgrall@amazon.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-11arm/xen: Don't probe xenbus as part of an early initcallJulien Grall1-2/+0
After Commit 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI"), xenbus_probe() will be called too early on Arm. This will recent to a guest hang during boot. If the hang wasn't there, we would have ended up to call xenbus_probe() twice (the second time is in xenbus_probe_initcall()). We don't need to initialize xenbus_probe() early for Arm guest. Therefore, the call in xen_guest_init() is now removed. After this change, there is no more external caller for xenbus_probe(). So the function is turned to a static one. Interestingly there were two prototypes for it. Cc: stable@vger.kernel.org Fixes: 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI") Reported-by: Ian Jackson <iwj@xenproject.org> Signed-off-by: Julien Grall <jgrall@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-13xen: Fix event channel callback via INTX/GSIDavid Woodhouse1-1/+1
For a while, event channel notification via the PCI platform device has been broken, because we attempt to communicate with xenstore before we even have notifications working, with the xs_reset_watches() call in xs_init(). We tend to get away with this on Xen versions below 4.0 because we avoid calling xs_reset_watches() anyway, because xenstore might not cope with reading a non-existent key. And newer Xen *does* have the vector callback support, so we rarely fall back to INTX/GSI delivery. To fix it, clean up a bit of the mess of xs_init() and xenbus_probe() startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM case, deferring it to be called from xenbus_probe() in the XS_HVM case instead. Then fix up the invocation of xenbus_probe() to happen either from its device_initcall if the callback is available early enough, or when the callback is finally set up. This means that the hack of calling xenbus_probe() from a workqueue after the first interrupt, or directly from the PCI platform device setup, is no longer needed. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+1
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-14Merge tag 'for-linus-5.10b-rc1-tag' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - two small cleanup patches - avoid error messages when initializing MCA banks in a Xen dom0 - a small series for converting the Xen gntdev driver to use pin_user_pages*() instead of get_user_pages*() - intermediate fix for running as a Xen guest on Arm with KPTI enabled (the final solution will need new Xen functionality) * tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Fix typo in xen_pagetable_p2m_free() x86/xen: disable Firmware First mode for correctable memory errors xen/arm: do not setup the runstate info page if kpti is enabled xen: remove redundant initialization of variable ret xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*() xen/gntdev.c: Mark pages as dirty
2020-10-13arch, drivers: replace for_each_membock() with for_each_mem_range()Mike Rapoport1-3/+4
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-07arm/arm64: xen: Fix to convert percpu address to gfn correctlyMasami Hiramatsu1-1/+1
Use per_cpu_ptr_to_phys() instead of virt_to_phys() for per-cpu address conversion. In xen_starting_cpu(), per-cpu xen_vcpu_info address is converted to gfn by virt_to_gfn() macro. However, since the virt_to_gfn(v) assumes the given virtual address is in linear mapped kernel memory area, it can not convert the per-cpu memory if it is allocated on vmalloc area. This depends on CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK. If it is enabled, the first chunk of percpu memory is linear mapped. In the other case, that is allocated from vmalloc area. Moreover, if the first chunk of percpu has run out until allocating xen_vcpu_info, it will be allocated on the 2nd chunk, which is based on kernel memory or vmalloc memory (depends on CONFIG_NEED_PER_CPU_KM). Without this fix and kernel configured to use vmalloc area for the percpu memory, the Dom0 kernel will fail to boot with following errors. [ 0.466172] Xen: initializing cpu0 [ 0.469601] ------------[ cut here ]------------ [ 0.474295] WARNING: CPU: 0 PID: 1 at arch/arm64/xen/../../arm/xen/enlighten.c:153 xen_starting_cpu+0x160/0x180 [ 0.484435] Modules linked in: [ 0.487565] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #4 [ 0.493895] Hardware name: Socionext Developer Box (DT) [ 0.499194] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.504836] pc : xen_starting_cpu+0x160/0x180 [ 0.509263] lr : xen_starting_cpu+0xb0/0x180 [ 0.513599] sp : ffff8000116cbb60 [ 0.516984] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.522366] x27: 0000000000000000 x26: 0000000000000000 [ 0.527754] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.533129] x23: 0000000000000000 x22: 0000000000000000 [ 0.538511] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.543892] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.549274] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.554655] x15: ffffffffffffffff x14: 0720072007200720 [ 0.560037] x13: 0720072007200720 x12: 0720072007200720 [ 0.565418] x11: 0720072007200720 x10: 0720072007200720 [ 0.570801] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.576182] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.581564] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.586945] x3 : 0000000000000000 x2 : ffff80000abec000 [ 0.592327] x1 : 000000000000002f x0 : 0000800000000000 [ 0.597716] Call trace: [ 0.600232] xen_starting_cpu+0x160/0x180 [ 0.604309] cpuhp_invoke_callback+0xac/0x640 [ 0.608736] cpuhp_issue_call+0xf4/0x150 [ 0.612728] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.618030] __cpuhp_setup_state+0x84/0xf8 [ 0.622192] xen_guest_init+0x324/0x364 [ 0.626097] do_one_initcall+0x54/0x250 [ 0.630003] kernel_init_freeable+0x12c/0x2c8 [ 0.634428] kernel_init+0x1c/0x128 [ 0.637988] ret_from_fork+0x10/0x18 [ 0.641635] ---[ end trace d95b5309a33f8b27 ]--- [ 0.646337] ------------[ cut here ]------------ [ 0.651005] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:158! [ 0.657697] Internal error: Oops - BUG: 0 [#1] SMP [ 0.662548] Modules linked in: [ 0.665676] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.9.0-rc4+ #4 [ 0.673398] Hardware name: Socionext Developer Box (DT) [ 0.678695] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.684338] pc : xen_starting_cpu+0x178/0x180 [ 0.688765] lr : xen_starting_cpu+0x144/0x180 [ 0.693188] sp : ffff8000116cbb60 [ 0.696573] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.701955] x27: 0000000000000000 x26: 0000000000000000 [ 0.707344] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.712718] x23: 0000000000000000 x22: 0000000000000000 [ 0.718107] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.723481] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.728863] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.734245] x15: ffffffffffffffff x14: 0720072007200720 [ 0.739626] x13: 0720072007200720 x12: 0720072007200720 [ 0.745008] x11: 0720072007200720 x10: 0720072007200720 [ 0.750390] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.755771] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.761153] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.766534] x3 : 0000000000000000 x2 : 00000000deadbeef [ 0.771916] x1 : 00000000deadbeef x0 : ffffffffffffffea [ 0.777304] Call trace: [ 0.779819] xen_starting_cpu+0x178/0x180 [ 0.783898] cpuhp_invoke_callback+0xac/0x640 [ 0.788325] cpuhp_issue_call+0xf4/0x150 [ 0.792317] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.797619] __cpuhp_setup_state+0x84/0xf8 [ 0.801779] xen_guest_init+0x324/0x364 [ 0.805683] do_one_initcall+0x54/0x250 [ 0.809590] kernel_init_freeable+0x12c/0x2c8 [ 0.814016] kernel_init+0x1c/0x128 [ 0.817583] ret_from_fork+0x10/0x18 [ 0.821226] Code: d0006980 f9427c00 cb000300 17ffffea (d4210000) [ 0.827415] ---[ end trace d95b5309a33f8b28 ]--- [ 0.832076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.839815] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/160196697165.60224.17470743378683334995.stgit@devnote2 Signed-off-by: Juergen Gross <jgross@suse.com>
2020-10-06dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>Christoph Hellwig1-1/+1
Move more nitty gritty DMA implementation details into the common internal header. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-04xen/arm: do not setup the runstate info page if kpti is enabledStefano Stabellini1-2/+4
The VCPUOP_register_runstate_memory_area hypercall takes a virtual address of a buffer as a parameter. The semantics of the hypercall are such that the virtual address should always be valid. When KPTI is enabled and we are running userspace code, the virtual address is not valid, thus, Linux is violating the semantics of VCPUOP_register_runstate_memory_area. Do not call VCPUOP_register_runstate_memory_area when KPTI is enabled. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> CC: Bertrand Marquis <Bertrand.Marquis@arm.com> CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Link: https://lore.kernel.org/r/20200924234955.15455-1-sstabellini@kernel.org Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-08-04xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maintStefano Stabellini1-6/+9
dma_cache_maint is getting called passing a dma address which could be different from a physical address. Add a struct device* parameter to dma_cache_maint. Translate the dma_addr_t parameter of dma_cache_maint by calling dma_to_phys. Do it for the first page and all the following pages, in case of multipage handling. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-11-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04xen/arm: introduce phys/dma translations in xen_dma_sync_for_*Stefano Stabellini1-11/+6
xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are getting called passing dma addresses. On some platforms dma addresses could be different from physical addresses. Before doing any operations on these addresses we need to convert them back to physical addresses using dma_to_phys. Move the arch_sync_dma_for_cpu and arch_sync_dma_for_device calls from xen_dma_sync_for_cpu/device to swiotlb-xen.c, and add a call dma_to_phys to do address translations there. dma_cache_maint is fixed by the next patch. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200710223427.6897-10-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_dma_sync_for_deviceStefano Stabellini1-2/+3
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-6-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpuStefano Stabellini1-2/+3
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-5-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-06-29arm/xen: remove the unused macro GRANT_TABLE_PHYSADDRXiaofei Tan1-1/+0
Fix the following sparse warning: arch/arm64/xen/../../arm/xen/enlighten.c:244: warning: macro "GRANT_TABLE_PHYSADDR" is not used [-Wunused-macros] It is an isolated macro, and should be removed when its last user was deleted in the following commit 3cf4095d7446 ("arm/xen: Use xen_xlate_map_ballooned_pages to setup grant table") Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2020-04-17arm/xen: make _xen_start_info staticJason Yan1-1/+1
Fix the following sparse warning: arch/arm64/xen/../../arm/xen/enlighten.c:39:19: warning: symbol '_xen_start_info' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200415084853.5808-1-yanaijie@huawei.com Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-28Merge branch 'master' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
2019-11-20dma-mapping: drop the dev argument to arch_sync_dma_for_*Christoph Hellwig1-6/+6
These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-07xen: mm: make xen_mm_init staticBen Dooks (Codethink)1-1/+1
The xen_mm_init is not exported or used outside of the file it is declared in, so make it static. This fixes the following sparse warning: arch/arm/xen/mm.c:136:12: warning: symbol 'xen_mm_init' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-07xen: mm: include <xen/xen-ops.h> for missing declarationsBen Dooks (Codethink)1-0/+1
Include <xen/xen-ops.h> for xen_{create,destroy}_contigous_region call declarations. Fixes the following sparse warnings: arch/arm/xen/mm.c:119:5: warning: symbol 'xen_create_contiguous_region' was not declared. Should it be static? arch/arm/xen/mm.c:131:6: warning: symbol 'xen_destroy_contiguous_region' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-10-04Merge tag 'for-linus-5.4-rc2-tag' of ↵Linus Torvalds4-32/+5
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some cases, plus a follow-on cleanup series for that driver - a patch for introducing non-blocking EFI callbacks in Xen's EFI driver, plu a cleanup patch for Xen EFI handling merging the x86 and ARM arch specific initialization into the Xen EFI driver - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning up after a user process has died - a fix for Xen on ARM after removal of ZONE_DMA - a cleanup patch for avoiding build warnings for Xen on ARM * tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix self-deadlock after killing user process xen/efi: have a common runtime setup function arm: xen: mm: use __GPF_DMA32 for arm64 xen/balloon: Clear PG_offline in balloon_retrieve() xen/balloon: Mark pages PG_offline in balloon_append() xen/balloon: Drop __balloon_append() xen/balloon: Set pages PageOffline() in balloon_add_region() ARM: xen: unexport HYPERVISOR_platform_op function xen/efi: Set nonblocking callbacks
2019-10-02xen/efi: have a common runtime setup functionJuergen Gross3-32/+0
Today the EFI runtime functions are setup in architecture specific code (x86 and arm), with the functions themselves living in drivers/xen as they are not architecture dependent. As the setup is exactly the same for arm and x86 move the setup to drivers/xen, too. This at once removes the need to make the single functions global visible. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> [boris: "Dropped EXPORT_SYMBOL_GPL(xen_efi_runtime_setup)"] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-10-01arm: xen: mm: use __GPF_DMA32 for arm64Peng Fan1-1/+4
arm64 shares some code under arch/arm/xen, including mm.c. However ZONE_DMA is removed by commit ad67f5a6545("arm64: replace ZONE_DMA with ZONE_DMA32"). So add a check if CONFIG_ZONE_DMA32 is enabled use __GFP_DMA32. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2019-10-01ARM: xen: unexport HYPERVISOR_platform_op functionStefano Stabellini1-1/+1
HYPERVISOR_platform_op() is an inline function and should not be exported. Since commit 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"), this causes a warning: WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL Instead, export the underlying function called by the static inline: HYPERVISOR_platform_op_raw. Fixes: 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 19:13:34 +0000