summaryrefslogtreecommitdiff
path: root/arch/arm/plat-iop
AgeCommit message (Collapse)AuthorFilesLines
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang1-1/+1
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang1-3/+3
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09[ARM] iop: iop3xx needs registers mapped uncached+unbufferedRussell King1-2/+3
Mikael Pettersson reported: The 2.6.28-rc kernels fail to detect PCI device 0000:00:01.0 (the first ethernet port) on my Thecus n2100 XScale box. There is however still a strange "ghost" device that gets partially detected in 2.6.28-rc2 vanilla. The IOP321 manual says: The user designates the memory region containing the OCCDR as non-cacheable and non-bufferable from the IntelR XScaleTM core. This guarantees that all load/stores to the OCCDR are only of DWORD quantities. Ensure that the OCCDR is so mapped. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King4-4/+4
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King5-6/+6
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King4-4/+4
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Eliminate useless includes of asm/mach-types.hRussell King2-2/+0
There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] 5160/1: IOP3XX: gpio/gpiolib supportArnaud Patard1-0/+43
This patch brings support for gpio/gpiolib framework to Intel IOP3xx platforms. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-26iop: unconditionally initialize the ATU on platforms known to be 'hosts'Dan Williams1-6/+27
Platforms like iq80321 and iq80331 which may be host-bus-adapters require 'iop3xx_init_atu=y' to be specified on the kernel command line. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-26iop: Program outbound windows using the correct definitionsRussell King1-3/+3
The outbound translate registers should be programmed with the bus addresses that are defined in the header files, rather than the physical address. Currently it doesn't matter because they're identical, but the headers currently allow them to be different, and not using the right macros here means that people are in for a surprise if they change them. Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-26iop: when scanning PCI bus, translate the PCI addresses according to the ↵Russell King1-2/+5
outbound window settings ... otherwise we end up trying to access peripherals using wrong PCI addresses. Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-26iop: Make IOP ATU window debug readableRussell King1-15/+20
Make the inbound and outbound memory windows debugging meaningful to those who don't know what the register names for the ATU mean. IOW, use plain english rather than register jargon. Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-06[ARM] replace remaining __FUNCTION__ occurrencesHarvey Harrison1-1/+1
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] xtime_seqlock: fix more ARM machines for xtime deadlockingPeter Zijlstra1-4/+0
move update_process_times() out from under xtime_lock. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4495/1: iop: combined watchdog timer driver for iop3xx and iop13xxDan Williams1-0/+8
In order for this driver to be shared across the iop architectures the iop3xx and iop13xx header files are modified to present a common interface for the iop_wdt driver. Details: * iop13xx supports disabling the timer while iop3xx does not. This requires a few 'compatibility' definitions in include/asm-arm/hardware/iop3xx.h to preclude adding #ifdef CONFIG_ARCH_IOP13XX blocks to the driver code. * The heartbeat interval is derived from the internal bus clock rate, so this this patch also exports the tick rate to the iop_wdt driver. Cc: Curt Bruns <curt.e.bruns@intel.com> Cc: Peter Milne <peter.milne@d-tacq.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-13iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driverDan Williams2-0/+211
Adds the platform device definitions and the architecture specific support routines (i.e. register initialization and descriptor formats) for the iop-adma driver. Changelog: * add support for > 1k zero sum buffer sizes * added dma/aau platform devices to iq80321 and iq80332 setup * fixed the calculation in iop_desc_is_aligned * support xor buffer sizes larger than 16MB * fix places where software descriptors are assumed to be contiguous, only hardware descriptors are contiguous for up to a PAGE_SIZE buffer size * convert to async_tx * add interrupt support * add platform devices for 80219 boards * do not call platform register macros in driver code * remove switch() statements for compatible register offsets/layouts * change over to bitmap based capabilities * remove unnecessary ARM assembly statement * checkpatch.pl fixes * gpl v2 only correction * phys move to dma_async_tx_descriptor Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-05-21Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-3/+3
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] spelling fixes [ARM] at91_adc parenthesis balance [ARM] 4400/1: S3C24XX: Add high-speed MMC device definition [ARM] 4399/2: S3C2443: Fix SMDK2443 nand timings [ARM] 4398/1: S3C2443: Fix watchdog IRQ number [ARM] 4397/1: S3C2443: remove SDI0/1 IRQ ambiguity [ARM] 4396/1: S3C2443: Add missing HCLK clocks [ARM] 4395/1: S3C24XX: add include of <linux/sysdev.h> to relevant machines [ARM] 4388/1: no need for arm/mm mmap range checks for non-mmu [ARM] 4387/1: fix /proc/cpuinfo formatting for pre-ARM7 parts [ARM] ARMv6: add CPU_HAS_ASID configuration [ARM] integrator: fix pci_v3 compile error with DEBUG_LL [ARM] gic: Fix gic cascade irq handling [ARM] Silence OMAP kernel configuration warning [ARM] Update ARM syscalls [ARM] 4384/1: S3C2412/13 SPI registers offset correction [ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop files [ARM] 4382/1: iop13xx: fix msi support [ARM] Remove Integrator/CP SMP platform support [ARM] 4378/1: KS8695: Serial driver fix ...
2007-05-21Detach sched.h from mm.hAlexey Dobriyan1-0/+1
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-20[ARM] spelling fixesSimon Arlott1-1/+1
Spelling fixes in arch/arm/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-16[ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop filesDan Williams1-2/+2
WARNING: arch/arm/mach-iop13xx/built-in.o - Section mismatch: reference to .init.text:iop13xx_pcie_map_irq from .text between 'iop13xx_pci_setup' (at offset 0x7fc) and 'iop13xx_map_pci_memory' While fixing this warning I also recalled Adrian Bunk's recommendation to not use inline in .c files, as 'iop13xx_map_pci_memory' is needlessly inlined. Removing 'inline' uncovered some dead code so that is cleaned up as well. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08Add IRQF_IRQPOLL flag on armBernhard Walle1-1/+1
Add IRQF_IRQPOLL for each timer interrupt. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06Merge branches 'arm-mm', 'at91', 'clkevts', 'imx', 'iop', 'misc', 'netx', ↵Russell King2-5/+143
'ns9xxx', 'omap', 'pxa', 'rpc', 's3c' and 'sa1100' into devel
2007-05-05[ARM] mm 10: allow memory type to be specified with ioremapRussell King1-2/+2
__ioremap() took a set of page table flags (specifically the cacheable and bufferable bits) to control the mapping type. However, with the advent of ARMv6, this is far too limited. Replace the page table flags with a memory type index, so that the desired attributes can be selected from the mem_type table. Finally, to prevent silent miscompilation due to the differing arguments, rename the __ioremap() and __ioremap_pfn() functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03[ARM] 4348/4: iop3xx: Give Linux control over PCI initializationDan Williams1-1/+139
Currently the iop3xx platform support code assumes that RedBoot is the bootloader and has already initialized the ATU. Linux should handle this initialization for three reasons: 1/ The memory map that RedBoot sets up is not optimal (page_to_dma and virt_to_phys return different addresses). The effect of this is that using the dma mapping API for the internal bus dma units generates pci bus addresses that are incorrect for the internal bus. 2/ Not all iop platforms use RedBoot 3/ If the ATU is already initialized it indicates that the iop is an add-in card in another host, it does not own the PCI bus, and should not be re-initialized. Changelog: * rather than change nr_controllers to zero, simply do not call pci_common_init Cc: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-30[ARM] 4340/1: iop: fix iop_getttimeoffsetDan Williams1-4/+4
Fix a typo which causes a necessary cpwait to be missed on iop3xx, Michael Brunner <mibru@gmx.de> Save a register in the assembly routine, rmk Cc: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4187/1: iop: unify time implementation across iop32x, iop33x, and iop13xxDan Williams2-26/+35
* architecture specific details are handled in asm/arch/time.h * ARCH_IOP13XX now selects PLAT_IOP * as suggested by Lennert use ifdef CONFIG_XSCALE to skip the cp_wait on XSC3 Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4186/1: iop: remove cp6_enable/disable routinesDan Williams1-4/+0
This functionality is replaced by cp6_trap Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4184/1: iop: cp6 access handler (undef_hook)Dan Williams2-4/+76
Enable svc access to cp6 via an undefined instruction hook. Do not enable access for usr code. This patch also makes iop13xx select PLAT_IOP, this requires a small change to drivers/i2c/busses/i2c-iop3xx.c. Per Lennert Buytenhek's note, the cp6 trap routine is moved to arch/arm/plat-iop Per Nicolas Pitre's note, the cp_wait is skipped since the latency to return to the faulting function is longer than cp_wait. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4182/1: iop3xx: fix the ioremap implementation to not remap static rangesDan Williams3-4/+62
Implement a custom ioremap implementation for iop3xx. This saves establishing new mappings. It also cleans up the PCI IO resource to be a physical address rather than a virtual address as Russell pointed out on the original iop13xx port. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds1-2/+2
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-25[ARM] 3832/1: iop3xx: coding style cleanupLennert Buytenhek2-6/+6
Since the iop32x code isn't iop321-specific, and the iop33x code isn't iop331-specfic, do a s/iop321/iop32x/ and s/iop331/iop33x/, and tidy up the code to conform to the coding style guidelines somewhat better. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3827/1: iop3xx: add common gpio moduleLennert Buytenhek2-1/+49
Implement the gpio_line_{config,get,set} API for iop3xx. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3825/1: iop3xx: use cp6 enable/disable macrosLennert Buytenhek1-0/+4
Add CP6 enable/disable sequences to the timekeeping code and the IRQ code. As a result, we can't depend on CP6 access being enabled when we enter get_irqnr_and_base anymore, so switch the latter over to using memory-mapped accesses for now. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3822/1: iop3xx: rewrite time handlingLennert Buytenhek2-1/+95
Merge and rewrite the iop32x/iop33x time code to do lost jiffy tracking properly, and put the result in plat-iop/time.c. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3820/1: iop3xx: factor out shared pci codeLennert Buytenhek2-1/+248
Merge the iop32x PCI code and iop33x PCI code into plat-iop/pci.c. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3819/1: iop3xx: factor out shared i2c codeLennert Buytenhek2-1/+82
Move the i2c bits shared between iop32x and iop33x to plat-iop/i2c.c and include/asm-arm/hardware/iop3xx.h. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3818/1: iop3xx: introduce arch/arm/plat-iop for shared iop32x/iop33x codeLennert Buytenhek2-0/+46
Introduce the arch/arm/plat-iop directory, for code shared between the iop32x and iop33x, and move the common memory map setup bits there. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 15:46:07 +0000