summaryrefslogtreecommitdiff
path: root/arch/arm/mach-integrator
AgeCommit message (Collapse)AuthorFilesLines
2014-10-22ARM: integrator: make the Integrator multiplatformLinus Walleij2-48/+18
This converts the ARM Integrator reference designs to be fully multiplatform. V4T, V5 and V6 multiplatform builds become possible after this patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-09Merge tag 'pci-v3.18-changes' of ↵Linus Torvalds1-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make <linux/aer.h> standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi
2014-09-30of/pci: Fix the conversion of IO ranges into IO resourcesLiviu Dudau1-11/+12
The ranges property for a host bridge controller in DT describes the mapping between the PCI bus address and the CPU physical address. The resources framework however expects that the IO resources start at a pseudo "port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT. The conversion from PCI ranges to resources failed to take that into account, returning a CPU physical address instead of a port number. Also fix all the drivers that depend on the old behaviour by fetching the CPU physical address based on the port number where it is being needed. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Thierry Reding <thierry.reding@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Catalin Marinas <catalin.marinas@arm.com>
2014-08-19ARM: integrator: add MMCI device to IM-PD1Linus Walleij1-0/+48
The IM-PD1 logic module daughterboard holds an MMCI block, which we can now provide using platform resources such as proper GPIO lines etc. We add the GPIO table dynamically and using the new GPIO descriptor mechanism. Tested and hey, it works: root@integrator:/ mount /dev/mmcblk0p1 /mnt/ root@integrator:/ ls /mnt/ ARM U-BOOT.EXE u-boot.bin u-boot.srec u-pad.bin Reviewed-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds2-16/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-07-07Merge tag 'versatile-1' of ↵Olof Johansson3-37/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/cleanup Merge "First pull request of Versatile family clean-ups for v3.17" from Linus Walleij: - Remove <mach/memory.h> from the Integrator, paving the road for multiplatform. - Push the CLCD helper code down into the framebuffer subsystem, removing the last hook in plat-versatile for the Integrator, also paving the road for multiplatform. Patches tested on Integrator/AP, Integrator/CP and Versatile AB (all real hardware). * tag 'versatile-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: video: move Versatile CLCD helpers ARM: integrator: get rid of <mach/memory.h> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-07Merge tag 'versatile-for-3.17' of ↵Olof Johansson2-16/+4
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next/soc Merge "DT IRQ and clock support for Versatile platforms" from Rob Herring. This branch moves IRQ and clock support over to DT for the versatile platforms. * tag 'versatile-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: clk: versatile: add versatile OSC support dts: versatile: add clock tree ARM: timer-sp: allow getting timer1 clock from DT to fallback to legacy clock dt/bindings: add compatible string for versatile osc clock dt/bindings: arm-boards: add binding for Versatile core module dts: versatile: add pl180 compatible strings ARM: versatile: remove init_irq hook for DT boot ARM: integrator: convert to use irqchip_init irqchip: versatile-fpga: add support for arm,versatile-sic irqchip: versatile-fpga: Add IRQCHIP_DECLARE support dts: versatile: add missing irq controller properties Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-06-27video: move Versatile CLCD helpersLinus Walleij2-3/+1
This moves the Versatile-specific helper code and panel database down into the drivers/video folder next to the CLCD driver itself, preserving the config symbol but also moving the header to platform data. This is necessary to rid the Integrator of this final <plat/*> inclusion dependency and get us one less user of the plat-versatile folder. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: linux-fbdev@vger.kernel.org Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-27ARM: integrator: get rid of <mach/memory.h>Linus Walleij1-34/+0
The Integrator has a custom <mach/memory.h> header defining the BUS_OFFSET for *_to_bus and bus_to_* operations as offset from 0x80000000. This switches the Integrator over to using the mechanism introduced for the Keystone to provide the same offset using the device tree, deletes <mach/memory.h> and augments the Integrator device tree to provide the bus offset. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-24ARM: integrator: convert to use irqchip_initRob Herring2-16/+4
Now that versatile-fpga irqchip has IRQCHIP_DECLARE support, the interrupt related initialization can be removed. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-24ARM: integrator: fix OF-related regressionLinus Walleij2-36/+13
Commit 07e461cd7e73a84f0e3757932b93cc80976fd749 "of: Ensure unique names without sacrificing determinism" caused a boot failure regression on the Integrator machines. The problem is probably caused by fiddling too much with the device tree population in the OF init function, such as passing the SoC bus device as parent when populating the device tree. This patch fixes the problem by: - Avoiding to explicitly look up the tree root - Look up devices needed before device population from the match only, passing NULL as root - Passing NULL as root and parent when calling of_platform_populate() After this the Integrators boot again. Tested on Integrator/AP and Integrator/CP. Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: integrator: fix section mismatch problemLinus Walleij2-2/+12
This addresses a section mismatch problem in the IM-PD1 driver in the Integrator/AP. The IM-PD1 contains a VIC interrupt controller and therefore the driver calls vic_init_cascaded() which is marked __init as irqchips are simply not hot-pluggable and specifically the VIC is assumed to initiate only on boot. However the module driver model of the Integrator LM bus assumes that logic tile drivers can be probed at runtime. This is not really the case for IM-PD1: these tiles are detected at boot and they cannot be plugged into a running system. Before this patch it is of course possible to modprobe them later. By first forcing the IM-PD1 to bool we make sure this driver gets compiled into the kernel, and we know it will be probed only at boot time when the tiles are detected, so we can tag its probe function __init_refok as we know it won't be called after boot now, and the section mismatch problem goes away. As a side effect, sysfs binding from userspace becomes impossible, so we tag the driver to suppress the bind/unbind sysfs attributes. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-05Merge tag 'tags/cleanup2-3.15' of ↵Linus Torvalds11-143/+57
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds4-46/+63
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds1-26/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-04-05Merge tag 'fixes-non-critical-3.15' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "Lots of isolated bug fixes that were not found to be important enough to be submitted before the merge window or backported into stable kernels. The vast majority of these came out of Arnd's randconfig testing and just prevents running into build-time bugs in configurations that we do not care about in practice" * tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: at91: fix a typo ARM: moxart: fix CPU selection ARM: tegra: fix board DT pinmux setup ARM: nspire: Fix compiler warning IXP4xx: Fix DMA masks. Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation" IXP4xx: Fix Goramo Multilink GPIO conversion. Revert "ARM: ixp4xx: fix gpio rework" ARM: tegra: make debug_ll code build for ARMv6 ARM: sunxi: fix build for THUMB2_KERNEL ARM: exynos: add missing include of linux/module.h ARM: exynos: fix l2x0 saved regs handling ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK ARM: samsung: select ATAGS where necessary ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic ARM: samsung: allow serial driver to be disabled ARM: s5pv210: enable IDE support in MACH_TORBRECK ARM: s5p64x0: fix building with only one soc type ARM: s3c64xx: select power domains only when used ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1 ...
2014-03-21ARM: integrator: only select pl01x if TTY is enabledArnd Bergmann1-4/+4
Building the integrator platform without TTY support currently results in a build failure because we always turn on the pl010 or pl011 drivers. Changing this to a conditional 'select' statement enables us to build more random configurations, although it should have little impact for practical configurations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org>
2014-03-12ARM: 8000/1: misc: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag from miscellaneous code in mach-xxx and plat-xxx This flag is a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-26ARM: integrator: register sched_clock directlyLinus Walleij1-4/+7
The detour through plat-versatile/sched-clock.c is hard to migrate to multiplatform set-up and it's very little code being duplicated so let's just inline the sched_clock registration and cut one more dependency to plat-versatile. This also makes this sched_clock implementation compulsory. Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26ARM: integrator: localize the hardware.h headerLinus Walleij6-8/+5
As we move toward multiplatform support for the Integrator family we need to localize all <mach/*> headers. This moves the hardware.h header down to the machine folder. There are no users outside the machine in the kernel. Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26ARM: integrator: merge platform.h to hardware.hLinus Walleij7-396/+318
There is no need to have the two separate headers <mach/platform.h> and <mach/hardware.h>, especially since we are now going to make them local files. There is not one single driver outside the mach-integrator folder referencing any of the files. Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26ARM: integrator: localize the impd1.h headerLinus Walleij2-5/+1
As we move toward multiplatform support for the Integrator family we need to localize all <mach/*> headers. This moves the impd1.h header down to the machine folder, copying the the three defines only used by the clock driver down into the clock driver. Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26ARM: integrator: localize the lm.h headerLinus Walleij5-7/+3
As we move toward multiplatform support for the Integrator family we need to localize all <mach/*> headers. This moves the lm.h header down to the machine folder as it is not used outside it anyway. Cc: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-18Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson1-26/+0
next/cleanup This cleanup series gets rid of <mach/timex.h> for platforms not using ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since 387798b (ARM: initial multiplatform support).) To make this work some code out of arch/arm needed to be adapted. The respective changes got acks by their maintainers to be taken via armsoc (with Andrew Morton substituting for Alessandro Zummo as rtc maintainer). Compared to the previous pull request there was another patch added that fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not squash this fix into the original commit to save him from the need to reverify the series. * tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux: ARM: ixp4xx: fix timer latch calculation ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too ARM: rpc: stop using <mach/timex.h> ARM: ixp4xx: stop using <mach/timex.h> input: ixp4xx-beeper: don't use symbols from <mach/timex.h> ARM: at91: don't use <mach/timex.h> ARM: ep93xx: stop using mach/timex.h ARM: mmp: stop using mach/timex.h ARM: netx: stop using mach/timex.h ARM: sa1100: stop using mach/timex.h clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE rtc: pxa: drop unused #define TIMER_FREQ rtc: at91sam9: include <mach/hardware.h> explicitly ARM/serial: at91: switch atmel serial to use gpiolib Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-13ARM: integrator: select GPIO blockLinus Walleij1-0/+2
The Integrator/AP can be used with a logic module called IM-PD1, which contains a few AMBA PrimeCell devices, one of which is the PL061 GPIO controller. As the lines from this GPIO controller are looped back to devices on the board itself and provides resources back to it, we need to always have GPIO and the PL061 driver available for other devices to work. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13ARM: integrator: register the IM-PD1 VICLinus Walleij2-9/+37
The peripherals on the IM-PD1 has never really been able to properly fire their IRQs to the main FPGA IRQ controller. Cascade it properly and register interrupts for all the devices in the array. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13ARM: integrator: use managed resources for the IM-PD1Linus Walleij1-26/+10
Switch the IM-PD1 driver to use managed resources and cut down on boilerplate. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13ARM: integrator: switch to fetch clocks from device treeLinus Walleij2-11/+14
This atomic commit changes the Integrator clock implementation and the machines to register clocks from the device tree and use these instead of the previous hard-coded clocks. In the clock implementation all hard-coded clocks and the special initialization function call goes away, and is replaced by two compatible strings for the two clocks available on the core module. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-31ARM: integrator: restore static map on the CPLinus Walleij1-0/+6
Commit 78d1632183454dba46ca8295484a5e7603acdc18 deleted the static mappings of the core modules, but this static map is still needed on the Integrator/CP (not the Integrator/AP). Restore the static map on the Integrator/CP. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-23Merge tag 'dt-for-linus' of ↵Linus Torvalds2-43/+31
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
2013-12-20ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, tooUwe Kleine-König1-26/+0
While <mach/timex.h> isn't used for multi-platform builds since long it still is for "normal" builds. As the previous patches fix all sites to not make use of this per-platform file, it can go now for good also for platforms that are not (yet) converted to multi-platform. While at it there are no users of CLOCK_TICK_RATE any more, so also drop the dummy #define. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-06Merge branch 'soc/sched_clock' into next/socKevin Hilman1-2/+2
From Stephen Boyd: * soc/sched_clock: ARM: versatile: Switch to sched_clock_register() ARM: orion: Switch to sched_clock_register() ARM: OMAP: Switch to sched_clock_register() ARM: iop: Switch to sched_clock_register() ARM: u300: Switch to sched_clock_register() ARM: sa1100: Switch to sched_clock_register() ARM: pxa: Switch to sched_clock_register() ARM: OMAP2+: Switch to sched_clock_register() ARM: OMAP1: Switch to sched_clock_register() ARM: msm: Switch to sched_clock_register() ARM: mmp: Switch to sched_clock_register() ARM: IXP4xx: Switch to sched_clock_register() ARM: integrator: Switch to sched_clock_register() ARM: imx: Switch to sched_clock_register() ARM: davinci: Switch to sched_clock_register() ARM: clps711x: Switch to sched_clock_register() ARM: timer-sp: Switch to sched_clock_register() Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-04ARM: integrator: move EBI to the device treeLinus Walleij2-28/+30
This moves the External Bus Interface (EBI) over to a device tree node and deletes the static mappings from the platform. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04ARM: integrator: delete static core module mappingsLinus Walleij2-15/+1
Now that the core module base is taken from the device tree both for platform initialization and cpufreq, let's delete the static mappings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-21ARM: integrator: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-15Merge tag 'omap-for-v3.13/fixes-for-merge-window-take2' of ↵Olof Johansson1-17/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Few clock fixes, a runtime PM fix, and pinctrl-single fix along with few other fixes that popped up during the merge window. * tag 'omap-for-v3.13/fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix build for dra7xx without omap4 and 5 ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume doc: devicetree: Add bindings documentation for omap-des driver ARM: dts: doc: Document missing compatible property for omap-sham driver ARM: OMAP3: Beagle: fix return value check in beagle_opp_init() ARM: OMAP: devicetree: fix SPI node compatible property syntax items pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init() + sync with newer trunk
2013-11-14ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCDJonathan Austin1-1/+2
This turns on the internal integrator LCD display(s). It seems that the code to do this got lost in refactoring of the CLCD driver. Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds1-17/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-10-24of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.Grant Likely1-16/+1
Several architectures open code effectively the same code block for finding and mapping PCI irqs. This patch consolidates it down to a single function. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-24of/irq: simplify args to irq_create_of_mappingGrant Likely1-1/+1
All the callers of irq_create_of_mapping() pass the contents of a struct of_phandle_args structure to the function. Since all the callers already have an of_phandle_args pointer, why not pass it directly to irq_create_of_mapping()? Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-24of/irq: Replace of_irq with of_phandle_argsGrant Likely1-3/+2
struct of_irq and struct of_phandle_args are exactly the same structure. This patch makes the kernel use of_phandle_args everywhere. This in itself isn't a big deal, but it makes some follow-on patches simpler. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-24of/irq: Rename of_irq_map_* functions to of_irq_parse_*Grant Likely1-2/+2
The OF irq handling code has been overloading the term 'map' to refer to both parsing the data in the device tree and mapping it to the internal linux irq system. This is probably because the device tree does have the concept of an 'interrupt-map' function for translating interrupt references from one node to another, but 'map' is still confusing when the primary purpose of some of the functions are to parse the DT data. This patch renames all the of_irq_map_* functions to of_irq_parse_* which makes it clear that there is a difference between the parsing phase and the mapping phase. Kernel code can make use of just the parsing or just the mapping support as needed by the subsystem. The patch was generated mechanically with a handful of sed commands. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-16ARM: integrator: core module registers from compatible stringsLinus Walleij2-2/+14
This augments the core machine code for the Integrator platforms to get their references to the core module device nodes by using compatible strings instead of predefined node names and rename the CP syscon node to be simply "syscon". Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16ARM: integrator: use devm_ioremap() to remap CMLinus Walleij1-1/+1
In the PCIv3 driver, use devm_ioremap() instead of just ioremap() when remapping the system controller in the PCIv3 driver, so the mapping will be automatically released on probe failure. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16ARM: integrator: move CM base into device treeLinus Walleij5-49/+87
This moves the core module (CM) control base into the device tree. It is a simple memory range of 0x200 bytes. Move the cm header down into the machine directory and unexport the cm_control() symbol as no modules are using it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16ARM: integrator: decommission the <mach/irqs.h> headerLinus Walleij5-85/+0
This header is no longer needed when we boot from the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16ARM: integrator: delete non-devicetree boot pathLinus Walleij4-463/+24
The Device Tree boot path now supports everything the ATAG boot can provide, and the two are equivalent. This deletes the ATAG boot path from the Integrator/AP and Integrator/CP platforms to move them on to the future. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16ARM: integrator: print the Linux IRQ in LL_DEBUG codeLinus Walleij1-2/+2
The static HW irqs have no meaning in the interrupt handler and does not correlate to the /proc/interrupts IRQ numbers anymore, print the Linux IRQ number instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16ARM: integrator: get the LM interrupts from DTLinus Walleij1-1/+1
The OF/DT boot path needs to get the LM (Logical Module) IRQs from the device tree for coherency. This augments the DT syscon node to contain these IRQs and alter the DT LM code to get them from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16ARM: integrator: get the CM control register by proxyLinus Walleij3-2/+11
The CM_CTRL register was accessed directly from the LED driver, which does not work now that we get the base for the register from the device tree. Add an accessor function to do this and make the LED driver compile again. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>