summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap3-beagle.dts
AgeCommit message (Collapse)AuthorFilesLines
2012-10-29ARM: dts: Add omap3-beagle.dtsJon Hunter1-0/+67
Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-10arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xmTony Lindgren1-115/+0
The extra serial port is not available on 34xx. And the current omap3-beagle.dts file is for omap3-beagle-xm.dts as it lists 512MB of memory. Please somebody submit a new omap3-beagle.dts for the original 34xx BeagleBoard after testing it properly. Cc: Benoit Cousson <b-cousson@ti.com> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-07ARM: dts: omap3-beagle: Enable audio supportPeter Ujfalusi1-0/+14
Add the needed sections to enable audio support on BeagleBoard when booted with DT blob. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-07ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs supportBenoit Cousson1-0/+12
Add the support for D6 and D7 LEDs on Beagle board. - D6 will be used for heartbeat - D7 will be used for mmc0 Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-07ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVMFlorian Vaussard1-0/+20
Add device tree properties for twl4030/gpio, according to the platform data of corresponding boards. This enables the led connected to LEDB output for both boards, as well as pullups/pulldowns on GPIO for the BeagleBoard. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-08-30arm/dts: Cleanup regulator naming and remove @0,1Rajendra Nayak1-1/+1
regulators do not have a 'reg' property, hence the regulator@0, regulator@1 do not make sense. get rid of it. Reported-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-21ARM: OMAP: Fix dts files w/ status property: "disable" -> "disabled"Roland Stigge1-2/+2
This patches fixes some status = "disable" strings to "disabled", the correct way of disabling nodes in the devicetree. Just the OMAP part here, the rest goes via other patches and trees. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-15mmc: dt: Consolidate DT bindingsArnd Bergmann1-1/+1
This patch unifies the current DT MMC bindings documentation and code, adds generic MMC DT bindings documentation, and updates .dts files for consistency. [cjb: typo fixes, addition of max-frequency property] Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-14arm/dts: OMAP3: Add mmc controller nodes and board dataRajendra Nayak1-0/+14
Add OMAP mmc related device tree data for OMAP3. Currenly limited to only omap3-beagle board. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-03-12arm/dts: twl: Pass regulator data from dtRajendra Nayak1-0/+6
Pass all the voltage regulator information for twl6030/twl4030 PMIC from device tree. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-03-07arm/dts: omap3-beagle: Add twl4030 and i2c EEPROMBenoit Cousson1-0/+29
Add required clock frequencies for the i2c client devices existing on beagle board. Add the twl4030 basic description with only the twl_rtc module. Add the EEPROM node. Based on original patch from Manju: http://www.spinics.net/lists/linux-omap/msg55831.html Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2011-12-13arm/dts: OMAP: Remove bootargs node from board filesBenoit Cousson1-9/+0
Since 3.2, the CONFIG_ARM_ATAG_DTB_COMPAT config allows an old bootloader to still use ATAG to provide cmdline. Remove chosen/bootargs from the DTS board files. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-04arm/dts: Add support for OMAP3 Beagle boardBenoit Cousson1-0/+29
Add OMAP3 beagleboard DTS file to use the omap3.dtsi SoC file. Add a default bootargs line to allow a boot from RAMDISK. Add memory node information. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 07:48:15 +0000