summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-09-20Merge branch 'next/dt' into next/multiplatformOlof Johansson237-10469/+10923
* next/dt: (182 commits) ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: dt: tegra: whistler: configure power off ARM: mxs: m28evk: Disable OCOTP OUI loading ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent ARM: dts: imx6q-sabrelite: add usbotg pinctrl support ARM: dts: imx23-olinuxino: Add USB host support ARM: dts: imx6q-sabrelite: add usbmisc device ARM: dts: mx23: Add USB resources ARM: dts: mxs: Add ethernetX to macX aliases ARM: msm: Remove non-DT targets from 8960 ARM: msm: Add DT support for 8960 ARM: msm: Move io mapping prototypes to common.h ARM: msm: Rename board-msm8x60 to signify its DT only status ARM: msm: Make 8660 a DT only target ARM: msm: Move 8660 to DT timer ARM: msm: Add DT support to msm_timer ...
2012-09-20Merge branch 'next/cleanup' into next/multiplatformOlof Johansson740-24435/+11785
* next/cleanup: (358 commits) ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local ARM: OMAP2+: Make ctrl_module_core_44xx.h local ...
2012-09-20Merge tag 'omap-cleanup-local-headers-for-v3.7' of ↵Olof Johansson109-221/+159
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: This branch contains mostly scripted changes to make omap header files local where possible to get us closer to supporting the ARM single zImage. After these changes mach includes are pretty much out of the way for omap2+, but still lots of manual work remains to sort through the remaining plat includes. * tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits) ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local ARM: OMAP2+: Make ctrl_module_core_44xx.h local ARM: OMAP2+: Make board-rx51.h local ...
2012-09-20Merge tag 'imx-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson3-0/+29
into next/dt From Shawn Guo: This is the second round of imx-dt patches for 3.7. It's based on and imx-dt-3.7 and imx-clk-dt-lookup which have already been pulled. * tag 'imx-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent ARM: dts: imx6q-sabrelite: add usbotg pinctrl support ARM: dts: imx6q-sabrelite: add usbmisc device
2012-09-20Merge tag 'mxs-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson4-4/+36
into next/dt From Shawn Guo: This is the second round of mxs-dt patches for 3.7. It's based on mxs-dt-3.7 and mxs-clk-dt-lookup which have been pulled into arm-soc. * tag 'mxs-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: m28evk: Disable OCOTP OUI loading ARM: dts: imx23-olinuxino: Add USB host support ARM: dts: mx23: Add USB resources ARM: dts: mxs: Add ethernetX to macX aliases
2012-09-20Merge tag 'tegra-for-3.7-dmaengine' of ↵Olof Johansson385-3025/+3224
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup ARM: tegra: switch to dmaengine The Tegra code-base has contained both a legacy DMA and a dmaengine driver since v3.6-rcX. This series flips Tegra's defconfig to enable dmaengine rather than the legacy driver, and removes the legacy driver and all client code. * tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ASoC: tegra: remove support of legacy DMA driver based access spi: tegra: remove support of legacy DMA driver based access ARM: tegra: apbio: remove support of legacy DMA driver based access ARM: tegra: dma: remove legacy APB DMA driver ARM: tegra: config: enable dmaengine based APB DMA driver + sync to 3.6-rc6
2012-09-20ARM: tegra: harmony: fix ldo7 regulator-nameStephen Warren1-1/+1
On Harmony, LDO7 does not feed vdd_fuse. Correct the regulator name. This issue was probably the result of copying Ventana's regulator setup when creating the Harmony .dts file. No other naming issues appear to exist. Reported-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20Merge tag 'tegra-for-3.7-dt2' of ↵Olof Johansson8-2/+617
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt ARM: tegra: second round of device tree changes This branch includes some late device tree changes for Tegra: A property is added to Whistler's device tree to enable the PMIC to act as the pm_power_off() implementation. A number of new device tree are added for boards from Avionic Design. * tag 'tegra-for-3.7-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: dt: tegra: whistler: configure power off
2012-09-20Merge branch 'next/gpio-samsung' of ↵Olof Johansson2-0/+106
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Since there are many changes for gpio-samsung in my tree, this has been included in my tree with Linus' agreement. * 'next/gpio-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: gpio: samsung: add devicetree init for s3c24xx arches
2012-09-20Merge branch 'samsung/cleanup' into next/cleanupOlof Johansson13-257/+55
From Kukjin Kim: Here, there are cleanup patches for Samsung v3.7 and most of them are related to cleanup Samsung specific gpio API. * samsung/cleanup: gpio: samsung: Update documentation ARM: S3C24XX: Use module_platform_driver macro in mach-osiris-dvs.c ARM: S3C24XX: Use module_platform_driver macro in h1940-bluetooth.c gpio-samsung: Remove now unused s3c2410_gpio* API ARM: S3C24XX: Remove obsolete GPIO API declarations ARM: S3C24XX: Convert users of s3c2410_gpio_setpin to gpiolib API ARM: EXYNOS: cleanup unused code related to GPS
2012-09-20ARM: OMAP2+: Make omap4-keypad.h localTony Lindgren3-2/+2
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l4_3xxx.h localTony Lindgren2-1/+1
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l4_2xxx.h localTony Lindgren3-2/+2
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l3_3xxx.h localTony Lindgren2-1/+1
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l3_2xxx.h localTony Lindgren4-3/+3
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move irda.h from plat to machTony Lindgren6-5/+5
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make hdq1w.h localTony Lindgren3-2/+2
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make gpmc-smsc911x.h localTony Lindgren10-9/+9
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make gpmc-smc91x.h localTony Lindgren6-5/+5
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move flash.h from plat to machTony Lindgren13-12/+12
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make debug-devices.h localTony Lindgren2-1/+1
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move board-voiceblue.h from plat to machTony Lindgren2-1/+1
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move board-sx1.h from plat to machTony Lindgren3-2/+2
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make omap-wakeupgen.h localTony Lindgren5-4/+4
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make omap-secure.h localTony Lindgren5-4/+4
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make ctrl_module_wkup_44xx.h localTony Lindgren2-1/+1
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h localTony Lindgren2-1/+1
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h localTony Lindgren2-1/+1
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make ctrl_module_core_44xx.h localTony Lindgren2-1/+1
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make board-rx51.h localTony Lindgren3-2/+2
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make am35xx.h localTony Lindgren6-5/+5
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make id.h localTony Lindgren3-2/+2
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move board-ams-delta.h from plat to machTony Lindgren8-8/+7
This is only used by omap1. And to fix things properly, this should not be included from the drivers at all. Acked-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Cc: linux-mtd@lists.infradead.org Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: alsa-devel@alsa-project.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Make plat/mux.h omap1 onlyTony Lindgren38-128/+85
We are moving omap2+ to use the device tree based pinctrl-single.c and will be removing the old mux framework. This will remove the omap1 specific parts from plat-omap. Acked-by: Felipe Balbi <balbi@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-usb@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP: Remove smp.hTony Lindgren2-10/+0
This is no longer needed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP: Remove unused param.hTony Lindgren1-8/+0
This is no longer needed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20Merge tag 'omap-devel-dt-merged-for-v3.7' of ↵Olof Johansson554-11431/+10469
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree related changes for omaps. Note that this branch is based on omap-cleanup-sparseirq-for-v3.7 to avoid merge conflicts with the sparseirq changes for gpio-twl4030 driver. * tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm/dts: Mux uart pins for omap4-sdp ARM: OMAP2+: select PINCTRL in Kconfig arm/dts: Add pinctrl driver entries for omap2/3/4 arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm ARM: dts: omap3-overo: Add support for the blue LED Documentation: dt: Update the OMAP documentation with Overo/Toby ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board ARM: dts: OMAP4: Add reg and interrupts for every nodes ARM: dts: AM33XX: Specify reg and interrupt property for all nodes ARM: dts: AM33XX: Convert all hex numbers to lower-case ARM: dts: omap3-beagle: Enable audio support ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file ARM: dts: omap5: Add McBSP entries ARM: dts: omap4: Add reg-names for McPDM and DMIC ARM: dts: omap4: Add McBSP entries ARM: dts: omap3: Add McBSP entries ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2 ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM ...
2012-09-20ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier supportThierry Reding2-0/+54
The Tamonten Evaluation Carrier is an evaluation board for the Tamonten SOM. More information is available here: http://www.avionic-design.de/en/products/nvidia-tegra-tamonten-system-en/nvidia-tegra-tamonten-evboard-en.html Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-20ARM: tegra: Add Avionic Design Medcom-Wide supportThierry Reding2-0/+59
The Medcom is a 16:9 15" terminal that is used for patient infotainment in hospitals. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-20ARM: tegra: Add Avionic Design Plutux supportThierry Reding2-0/+51
The Plutux is a set-top box device based on the Tamonten SOM and can be connected to a display via HDMI. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-20ARM: tegra: Add Avionic Design Tamonten supportThierry Reding1-0/+449
The Tamonten is an NVIDIA Tegra2 based system-on-module (SOM) that is designed to cover a broad range of applications. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-20ARM: tegra: dts: Add pwm labelThierry Reding2-2/+2
PWM devices can be referenced in the DT by phandle and per-chip index. In order for this to work properly, the PWM controller needs to have a label attached to it. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-19ARM: dt: tegra: whistler: configure power offStephen Warren1-0/+2
Add DT property to tell the MAX8907 that it should provide the pm_power_off() implementation. This allows "shutdown" to work. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-19ARM: omap: move platform_data definitionsArnd Bergmann81-87/+92
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
2012-09-19ARM: mxs: m28evk: Disable OCOTP OUI loadingMarek Vasut1-2/+0
Don't load the FEC MAC address from OCOTP, but use the one supplied via device tree by U-Boot. This is the preferred way, every DT-capable bootloader does set up "mac-address" and "local-mac-address" properties into the DT passed to the kernel. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-19ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parentHuang Shijie1-0/+7
The gpmi-nand driver can support the ONFI nand chip's EDO (extra data out) mode in the asynchrounous mode. In the asynchrounous mode 5, the gpmi needs 100MHz clock for the IO. But with the pll2_pfd0_352m, we can not get the 100MHz clock. So choose pll2_pfd2_396m as enfc_sel's parent. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-19ARM: dts: imx6q-sabrelite: add usbotg pinctrl supportRichard Zhao2-0/+10
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-19ARM: dts: imx23-olinuxino: Add USB host supportFabio Estevam1-0/+26
Add USB host support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-18Merge tag 'cleanup-fixes-for-v3.7' of ↵Olof Johansson6-26/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: These fixes are needed to fix non-omap build breakage for twl-core driver and to fix omap1_defconfig compile when led driver changes and omap sparse IRQ changes are merged together. Also fix warnings for omaps not using pinctrl framework yet. * tag 'cleanup-fixes-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: Include gpio-omap.h for board-h2 and board-h3 ARM: OMAP2+: Enable pinctrl dummy states mfd: Fix compile for twl-core.c by removing cpu_is_omap usage
2012-09-17ARM: OMAP1: Include gpio-omap.h for board-h2 and board-h3Tony Lindgren2-0/+2
Merge of the LED related changes with omap sparse IRQ and hardware.h related changes causes a build issue otherwise: arch/arm/mach-omap1/board-h2.c:319: error: implicit declaration of function ‘OMAP_MPUIO’ arch/arm/mach-omap1/board-h2.c:319: error: initializer element is not constant arch/arm/mach-omap1/board-h2.c:319: error: (near initialization for ‘h2_gpio_led_pins[1].gpio’) Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 13:26:30 +0000