1 files changed, 68 insertions, 68 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 2a5d45b4cb15..cf3413116aff 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -35,6 +35,8 @@
 #define DRIVER_AUTHOR "Sarah Sharp"
 #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
 
+#define	PORT_WAKE_BITS	(PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+
 /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
 static int link_quirk;
 module_param(link_quirk, int, S_IRUGO | S_IWUSR);
@@ -851,13 +853,47 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
 	xhci_set_cmd_ring_deq(xhci);
 }
 
+static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
+{
+	int port_index;
+	__le32 __iomem **port_array;
+	unsigned long flags;
+	u32 t1, t2;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* disble usb3 ports Wake bits*/
+	port_index = xhci->num_usb3_ports;
+	port_array = xhci->usb3_ports;
+	while (port_index--) {
+		t1 = readl(port_array[port_index]);
+		t1 = xhci_port_state_to_neutral(t1);
+		t2 = t1 & ~PORT_WAKE_BITS;
+		if (t1 != t2)
+			writel(t2, port_array[port_index]);
+	}
+
+	/* disble usb2 ports Wake bits*/
+	port_index = xhci->num_usb2_ports;
+	port_array = xhci->usb2_ports;
+	while (port_index--) {
+		t1 = readl(port_array[port_index]);
+		t1 = xhci_port_state_to_neutral(t1);
+		t2 = t1 & ~PORT_WAKE_BITS;
+		if (t1 != t2)
+			writel(t2, port_array[port_index]);
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
 /*
  * Stop HC (not bus-specific)
  *
  * This is called when the machine transition into S3/S4 mode.
  *
  */
-int xhci_suspend(struct xhci_hcd *xhci)
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 {
 	int			rc = 0;
 	unsigned int		delay = XHCI_MAX_HALT_USEC;
@@ -868,6 +904,10 @@ int xhci_suspend(struct xhci_hcd *xhci)
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
+	/* Clear root port wake on bits if wakeup not allowed. */
+	if (!do_wakeup)
+		xhci_disable_port_wake_on_bits(xhci);
+
 	/* Don't poll the roothubs on bus suspend. */
 	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
@@ -2912,68 +2952,33 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 	}
 }
 
-/* Deal with stalled endpoints.  The core should have sent the control message
- * to clear the halt condition.  However, we need to make the xHCI hardware
- * reset its sequence number, since a device will expect a sequence number of
- * zero after the halt condition is cleared.
+/* Called when clearing halted device. The core should have sent the control
+ * message to clear the device halt condition. The host side of the halt should
+ * already be cleared with a reset endpoint command issued when the STALL tx
+ * event was received.
+ *
  * Context: in_interrupt
  */
+
 void xhci_endpoint_reset(struct usb_hcd *hcd,
 		struct usb_host_endpoint *ep)
 {
 	struct xhci_hcd *xhci;
-	struct usb_device *udev;
-	unsigned int ep_index;
-	unsigned long flags;
-	int ret;
-	struct xhci_virt_ep *virt_ep;
-	struct xhci_command *command;
 
 	xhci = hcd_to_xhci(hcd);
-	udev = (struct usb_device *) ep->hcpriv;
-	/* Called with a root hub endpoint (or an endpoint that wasn't added
-	 * with xhci_add_endpoint()
-	 */
-	if (!ep->hcpriv)
-		return;
-	ep_index = xhci_get_endpoint_index(&ep->desc);
-	virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index];
-	if (!virt_ep->stopped_td) {
-		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
-			"Endpoint 0x%x not halted, refusing to reset.",
-			ep->desc.bEndpointAddress);
-		return;
-	}
-	if (usb_endpoint_xfer_control(&ep->desc)) {
-		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
-				"Control endpoint stall already handled.");
-		return;
-	}
 
-	command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
-	if (!command)
-		return;
-
-	xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
-			"Queueing reset endpoint command");
-	spin_lock_irqsave(&xhci->lock, flags);
-	ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index);
 	/*
-	 * Can't change the ring dequeue pointer until it's transitioned to the
-	 * stopped state, which is only upon a successful reset endpoint
-	 * command.  Better hope that last command worked!
+	 * We might need to implement the config ep cmd in xhci 4.8.1 note:
+	 * The Reset Endpoint Command may only be issued to endpoints in the
+	 * Halted state. If software wishes reset the Data Toggle or Sequence
+	 * Number of an endpoint that isn't in the Halted state, then software
+	 * may issue a Configure Endpoint Command with the Drop and Add bits set
+	 * for the target endpoint. that is in the Stopped state.
 	 */
-	if (!ret) {
-		xhci_cleanup_stalled_ring(xhci, udev, ep_index);
-		kfree(virt_ep->stopped_td);
-		xhci_ring_cmd_db(xhci);
-	}
-	virt_ep->stopped_td = NULL;
-	virt_ep->stopped_stream = 0;
-	spin_unlock_irqrestore(&xhci->lock, flags);
 
-	if (ret)
-		xhci_warn(xhci, "FIXME allocate a new ring segment\n");
+	/* For now just print debug to follow the situation */
+	xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n",
+		 ep->desc.bEndpointAddress);
 }
 
 static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
@@ -4024,7 +4029,7 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 	return ret;
 }
 
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
 
 /* BESL to HIRD Encoding array for USB2 LPM */
 static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000,
@@ -4239,24 +4244,8 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
 	return 0;
 }
 
-#else
-
-int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
-				struct usb_device *udev, int enable)
-{
-	return 0;
-}
-
-int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
-{
-	return 0;
-}
-
-#endif /* CONFIG_PM_RUNTIME */
-
 /*---------------------- USB 3.0 Link PM functions ------------------------*/
 
-#ifdef CONFIG_PM
 /* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */
 static unsigned long long xhci_service_interval_to_ns(
 		struct usb_endpoint_descriptor *desc)
@@ -4687,6 +4676,17 @@ int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
 }
 #else /* CONFIG_PM */
 
+int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+				struct usb_device *udev, int enable)
+{
+	return 0;
+}
+
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	return 0;
+}
+
 int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
 			struct usb_device *udev, enum usb3_link_state state)
 {