diff options
Diffstat (limited to 'drivers/soc')
| -rw-r--r-- | drivers/soc/bcm/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/Makefile | 1 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/Makefile | 3 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/aon_defs.h | 113 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/pm-arm.c | 822 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/pm-mips.c | 461 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/pm.h | 89 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/s2-arm.S | 76 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/s2-mips.S | 200 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/s3-mips.S | 146 | ||||
| -rw-r--r-- | drivers/soc/renesas/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/soc/renesas/Makefile | 1 | ||||
| -rw-r--r-- | drivers/soc/renesas/r8a77970-sysc.c | 39 | ||||
| -rw-r--r-- | drivers/soc/renesas/rcar-rst.c | 1 | ||||
| -rw-r--r-- | drivers/soc/renesas/rcar-sysc.c | 3 | ||||
| -rw-r--r-- | drivers/soc/renesas/rcar-sysc.h | 1 | ||||
| -rw-r--r-- | drivers/soc/renesas/renesas-soc.c | 8 |
18 files changed, 1983 insertions, 1 deletions
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig index 49f1e2a75d61..055a845ed979 100644 --- a/drivers/soc/bcm/Kconfig +++ b/drivers/soc/bcm/Kconfig @@ -20,4 +20,6 @@ config SOC_BRCMSTB If unsure, say N. +source "drivers/soc/bcm/brcmstb/Kconfig" + endmenu diff --git a/drivers/soc/bcm/brcmstb/Kconfig b/drivers/soc/bcm/brcmstb/Kconfig new file mode 100644 index 000000000000..d36f6e03c1a6 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/Kconfig @@ -0,0 +1,10 @@ +if SOC_BRCMSTB + +config BRCMSTB_PM + bool "Support suspend/resume for STB platforms" + default y + depends on PM + depends on ARCH_BRCMSTB || BMIPS_GENERIC + select ARM_CPU_SUSPEND if ARM + +endif # SOC_BRCMSTB diff --git a/drivers/soc/bcm/brcmstb/Makefile b/drivers/soc/bcm/brcmstb/Makefile index 9120b2715d3e..01687c26535b 100644 --- a/drivers/soc/bcm/brcmstb/Makefile +++ b/drivers/soc/bcm/brcmstb/Makefile @@ -1 +1,2 @@ obj-y += common.o biuctrl.o +obj-$(CONFIG_BRCMSTB_PM) += pm/ diff --git a/drivers/soc/bcm/brcmstb/pm/Makefile b/drivers/soc/bcm/brcmstb/pm/Makefile new file mode 100644 index 000000000000..08bbd244ef11 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARM) += s2-arm.o pm-arm.o +AFLAGS_s2-arm.o := -march=armv7-a +obj-$(CONFIG_BMIPS_GENERIC) += s2-mips.o s3-mips.o pm-mips.o diff --git a/drivers/soc/bcm/brcmstb/pm/aon_defs.h b/drivers/soc/bcm/brcmstb/pm/aon_defs.h new file mode 100644 index 000000000000..fb936abd847d --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/aon_defs.h @@ -0,0 +1,113 @@ +/* + * Always ON (AON) register interface between bootloader and Linux + * + * Copyright © 2014-2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __BRCMSTB_AON_DEFS_H__ +#define __BRCMSTB_AON_DEFS_H__ + +#include <linux/compiler.h> + +/* Magic number in upper 16-bits */ +#define BRCMSTB_S3_MAGIC_MASK 0xffff0000 +#define BRCMSTB_S3_MAGIC_SHORT 0x5AFE0000 + +enum { + /* Restore random key for AES memory verification (off = fixed key) */ + S3_FLAG_LOAD_RANDKEY = (1 << 0), + + /* Scratch buffer page table is present */ + S3_FLAG_SCRATCH_BUFFER_TABLE = (1 << 1), + + /* Skip all memory verification */ + S3_FLAG_NO_MEM_VERIFY = (1 << 2), + + /* + * Modification of this bit reserved for bootloader only. + * 1=PSCI started Linux, 0=Direct jump to Linux. + */ + S3_FLAG_PSCI_BOOT = (1 << 3), + + /* + * Modification of this bit reserved for bootloader only. + * 1=64 bit boot, 0=32 bit boot. + */ + S3_FLAG_BOOTED64 = (1 << 4), +}; + +#define BRCMSTB_HASH_LEN (128 / 8) /* 128-bit hash */ + +#define AON_REG_MAGIC_FLAGS 0x00 +#define AON_REG_CONTROL_LOW 0x04 +#define AON_REG_CONTROL_HIGH 0x08 +#define AON_REG_S3_HASH 0x0c /* hash of S3 params */ +#define AON_REG_CONTROL_HASH_LEN 0x1c +#define AON_REG_PANIC 0x20 + +#define BRCMSTB_S3_MAGIC 0x5AFEB007 +#define BRCMSTB_PANIC_MAGIC 0x512E115E +#define BOOTLOADER_SCRATCH_SIZE 64 +#define BRCMSTB_DTU_STATE_MAP_ENTRIES (8*1024) +#define BRCMSTB_DTU_CONFIG_ENTRIES (512) +#define BRCMSTB_DTU_COUNT (2) + +#define IMAGE_DESCRIPTORS_BUFSIZE (2 * 1024) +#define S3_BOOTLOADER_RESERVED (S3_FLAG_PSCI_BOOT | S3_FLAG_BOOTED64) + +struct brcmstb_bootloader_dtu_table { + uint32_t dtu_state_map[BRCMSTB_DTU_STATE_MAP_ENTRIES]; + uint32_t dtu_config[BRCMSTB_DTU_CONFIG_ENTRIES]; +}; + +/* + * Bootloader utilizes a custom parameter block left in DRAM for handling S3 + * warm resume + */ +struct brcmstb_s3_params { + /* scratch memory for bootloader */ + uint8_t scratch[BOOTLOADER_SCRATCH_SIZE]; + + uint32_t magic; /* BRCMSTB_S3_MAGIC */ + uint64_t reentry; /* PA */ + + /* descriptors */ + uint32_t hash[BRCMSTB_HASH_LEN / 4]; + + /* + * If 0, then ignore this parameter (there is only one set of + * descriptors) + * + * If non-0, then a second set of descriptors is stored at: + * + * descriptors + desc_offset_2 + * + * The MAC result of both descriptors is XOR'd and stored in @hash + */ + uint32_t desc_offset_2; + + /* + * (Physical) address of a brcmstb_bootloader_scratch_table, for + * providing a large DRAM buffer to the bootloader + */ + uint64_t buffer_table; + + uint32_t spare[70]; + + uint8_t descriptors[IMAGE_DESCRIPTORS_BUFSIZE]; + /* + * Must be last member of struct. See brcmstb_pm_s3_finish() for reason. + */ + struct brcmstb_bootloader_dtu_table dtu[BRCMSTB_DTU_COUNT]; +} __packed; + +#endif /* __BRCMSTB_AON_DEFS_H__ */ diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c new file mode 100644 index 000000000000..dcf8c8065508 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c @@ -0,0 +1,822 @@ +/* + * ARM-specific support for Broadcom STB S2/S3/S5 power management + * + * S2: clock gate CPUs and as many peripherals as possible + * S3: power off all of the chip except the Always ON (AON) island; keep DDR is + * self-refresh + * S5: (a.k.a. S3 cold boot) much like S3, except DDR is powered down, so we + * treat this mode like a soft power-off, with wakeup allowed from AON + * + * Copyright © 2014-2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "brcmstb-pm: " fmt + +#include <linux/bitops.h> +#include <linux/compiler.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kconfig.h> +#include <linux/kernel.h> +#include <linux/memblock.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/printk.h> +#include <linux/proc_fs.h> +#include <linux/sizes.h> +#include <linux/slab.h> +#include <linux/sort.h> +#include <linux/suspend.h> +#include <linux/types.h> +#include <linux/uaccess.h> +#include <linux/soc/brcmstb/brcmstb.h> + +#include <asm/fncpy.h> +#include <asm/setup.h> +#include <asm/suspend.h> + +#include "pm.h" +#include "aon_defs.h" + +#define SHIMPHY_DDR_PAD_CNTRL 0x8c + +/* Method #0 */ +#define SHIMPHY_PAD_PLL_SEQUENCE BIT(8) +#define SHIMPHY_PAD_GATE_PLL_S3 BIT(9) + +/* Method #1 */ +#define PWRDWN_SEQ_NO_SEQUENCING 0 +#define PWRDWN_SEQ_HOLD_CHANNEL 1 +#define PWRDWN_SEQ_RESET_PLL 2 +#define PWRDWN_SEQ_POWERDOWN_PLL 3 + +#define SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK 0x00f00000 +#define SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT 20 + +#define DDR_FORCE_CKE_RST_N BIT(3) +#define DDR_PHY_RST_N BIT(2) +#define DDR_PHY_CKE BIT(1) + +#define DDR_PHY_NO_CHANNEL 0xffffffff + +#define MAX_NUM_MEMC 3 + +struct brcmstb_memc { + void __iomem *ddr_phy_base; + void __iomem *ddr_shimphy_base; + void __iomem *ddr_ctrl; +}; + +struct brcmstb_pm_control { + void __iomem *aon_ctrl_base; + void __iomem *aon_sram; + struct brcmstb_memc memcs[MAX_NUM_MEMC]; + + void __iomem *boot_sram; + size_t boot_sram_len; + + bool support_warm_boot; + size_t pll_status_offset; + int num_memc; + + struct brcmstb_s3_params *s3_params; + dma_addr_t s3_params_pa; + int s3entry_method; + u32 warm_boot_offset; + u32 phy_a_standby_ctrl_offs; + u32 phy_b_standby_ctrl_offs; + bool needs_ddr_pad; + struct platform_device *pdev; +}; + +enum bsp_initiate_command { + BSP_CLOCK_STOP = 0x00, + BSP_GEN_RANDOM_KEY = 0x4A, + BSP_RESTORE_RANDOM_KEY = 0x55, + BSP_GEN_FIXED_KEY = 0x63, +}; + +#define PM_INITIATE 0x01 +#define PM_INITIATE_SUCCESS 0x00 +#define PM_INITIATE_FAIL 0xfe + +static struct brcmstb_pm_control ctrl; + +static int (*brcmstb_pm_do_s2_sram)(void __iomem *aon_ctrl_base, + void __iomem *ddr_phy_pll_status); + +static int brcmstb_init_sram(struct device_node *dn) +{ + void __iomem *sram; + struct resource res; + int ret; + + ret = of_address_to_resource(dn, 0, &res); + if (ret) + return ret; + + /* Uncached, executable remapping of SRAM */ + sram = __arm_ioremap_exec(res.start, resource_size(&res), false); + if (!sram) + return -ENOMEM; + + ctrl.boot_sram = sram; + ctrl.boot_sram_len = resource_size(&res); + + return 0; +} + +static const struct of_device_id sram_dt_ids[] = { + { .compatible = "mmio-sram" }, + { /* sentinel */ } +}; + +static int do_bsp_initiate_command(enum bsp_initiate_command cmd) +{ + void __iomem *base = ctrl.aon_ctrl_base; + int ret; + int timeo = 1000 * 1000; /* 1 second */ + + writel_relaxed(0, base + AON_CTRL_PM_INITIATE); + (void)readl_relaxed(base + AON_CTRL_PM_INITIATE); + + /* Go! */ + writel_relaxed((cmd << 1) | PM_INITIATE, base + AON_CTRL_PM_INITIATE); + + /* + * If firmware doesn't support the 'ack', then just assume it's done + * after 10ms. Note that this only works for command 0, BSP_CLOCK_STOP + */ + if (of_machine_is_compatible("brcm,bcm74371a0")) { + (void)readl_relaxed(base + AON_CTRL_PM_INITIATE); + mdelay(10); + return 0; + } + + for (;;) { + ret = readl_relaxed(base + AON_CTRL_PM_INITIATE); + if (!(ret & PM_INITIATE)) + break; + if (timeo <= 0) { + pr_err("error: timeout waiting for BSP (%x)\n", ret); + break; + } + timeo -= 50; + udelay(50); + } + + return (ret & 0xff) != PM_INITIATE_SUCCESS; +} + +static int brcmstb_pm_handshake(void) +{ + void __iomem *base = ctrl.aon_ctrl_base; + u32 tmp; + int ret; + + /* BSP power handshake, v1 */ + tmp = readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS); + tmp &= ~1UL; + writel_relaxed(tmp, base + AON_CTRL_HOST_MISC_CMDS); + (void)readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS); + + ret = do_bsp_initiate_command(BSP_CLOCK_STOP); + if (ret) + pr_err("BSP handshake failed\n"); + + /* + * HACK: BSP may have internal race on the CLOCK_STOP command. + * Avoid touching the BSP for a few milliseconds. + */ + mdelay(3); + + return ret; +} + +static inline void shimphy_set(u32 value, u32 mask) +{ + int i; + + if (!ctrl.needs_ddr_pad) + return; + + for (i = 0; i < ctrl.num_memc; i++) { + u32 tmp; + + tmp = readl_relaxed(ctrl.memcs[i].ddr_shimphy_base + + SHIMPHY_DDR_PAD_CNTRL); + tmp = value | (tmp & mask); + writel_relaxed(tmp, ctrl.memcs[i].ddr_shimphy_base + + SHIMPHY_DDR_PAD_CNTRL); + } + wmb(); /* Complete sequence in order. */ +} + +static inline void ddr_ctrl_set(bool warmboot) +{ + int i; + + for (i = 0; i < ctrl.num_memc; i++) { + u32 tmp; + + tmp = readl_relaxed(ctrl.memcs[i].ddr_ctrl + + ctrl.warm_boot_offset); + if (warmboot) + tmp |= 1; + else + tmp &= ~1; /* Cold boot */ + writel_relaxed(tmp, ctrl.memcs[i].ddr_ctrl + + ctrl.warm_boot_offset); + } + /* Complete sequence in order */ + wmb(); +} + +static inline void s3entry_method0(void) +{ + shimphy_set(SHIMPHY_PAD_GATE_PLL_S3 | SHIMPHY_PAD_PLL_SEQUENCE, + 0xffffffff); +} + +static inline void s3entry_method1(void) +{ + /* + * S3 Entry Sequence + * ----------------- + * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3 + * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 1 + */ + shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL << + SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT), + ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK); + + ddr_ctrl_set(true); +} + +static inline void s5entry_method1(void) +{ + int i; + + /* + * S5 Entry Sequence + * ----------------- + * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3 + * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 0 + * Step 3: DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ CKE ] = 0 + * DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ RST_N ] = 0 + */ + shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL << + SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT), + ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK); + + ddr_ctrl_set(false); + + for (i = 0; i < ctrl.num_memc; i++) { + u32 tmp; + + /* Step 3: Channel A (RST_N = CKE = 0) */ + tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base + + ctrl.phy_a_standby_ctrl_offs); + tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N); + writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base + + ctrl.phy_a_standby_ctrl_offs); + + /* Step 3: Channel B? */ + if (ctrl.phy_b_standby_ctrl_offs != DDR_PHY_NO_CHANNEL) { + tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base + + ctrl.phy_b_standby_ctrl_offs); + tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N); + writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base + + ctrl.phy_b_standby_ctrl_offs); + } + } + /* Must complete */ + wmb(); +} + +/* + * Run a Power Management State Machine (PMSM) shutdown command and put the CPU + * into a low-power mode + */ +static void brcmstb_do_pmsm_power_down(unsigned long base_cmd, bool onewrite) +{ + void __iomem *base = ctrl.aon_ctrl_base; + + if ((ctrl.s3entry_method == 1) && (base_cmd == PM_COLD_CONFIG)) + s5entry_method1(); + + /* pm_start_pwrdn transition 0->1 */ + writel_relaxed(base_cmd, base + AON_CTRL_PM_CTRL); + + if (!onewrite) { + (void)readl_relaxed(base + AON_CTRL_PM_CTRL); + + writel_relaxed(base_cmd | PM_PWR_DOWN, base + AON_CTRL_PM_CTRL); + (void)readl_relaxed(base + AON_CTRL_PM_CTRL); + } + wfi(); +} + +/* Support S5 cold boot out of "poweroff" */ +static void brcmstb_pm_poweroff(void) +{ + brcmstb_pm_handshake(); + + /* Clear magic S3 warm-boot value */ + writel_relaxed(0, ctrl.aon_sram + AON_REG_MAGIC_FLAGS); + (void)readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS); + + /* Skip wait-for-interrupt signal; just use a countdown */ + writel_relaxed(0x10, ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT); + (void)readl_relaxed(ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT); + + if (ctrl.s3entry_method == 1) { + shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL << + SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT), + ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK); + ddr_ctrl_set(false); + brcmstb_do_pmsm_power_down(M1_PM_COLD_CONFIG, true); + return; /* We should never actually get here */ + } + + brcmstb_do_pmsm_power_down(PM_COLD_CONFIG, false); +} + +static void *brcmstb_pm_copy_to_sram(void *fn, size_t len) +{ + unsigned int size = ALIGN(len, FNCPY_ALIGN); + + if (ctrl.boot_sram_len < size) { + pr_err("standby code will not fit in SRAM\n"); + return NULL; + } + + return fncpy(ctrl.boot_sram, fn, size); +} + +/* + * S2 suspend/resume picks up where we left off, so we must execute carefully + * from SRAM, in order to allow DDR to come back up safely before we continue. + */ +static int brcmstb_pm_s2(void) +{ + /* A previous S3 can set a value hazardous to S2, so make sure. */ + if (ctrl.s3entry_method == 1) { + shimphy_set((PWRDWN_SEQ_NO_SEQUENCING << + SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT), + ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK); + ddr_ctrl_set(false); + } + + brcmstb_pm_do_s2_sram = brcmstb_pm_copy_to_sram(&brcmstb_pm_do_s2, + brcmstb_pm_do_s2_sz); + if (!brcmstb_pm_do_s2_sram) + return -EINVAL; + + return brcmstb_pm_do_s2_sram(ctrl.aon_ctrl_base, + ctrl.memcs[0].ddr_phy_base + + ctrl.pll_status_offset); +} + +/* + * This function is called on a new stack, so don't allow inlining (which will + * generate stack references on the old stack). It cannot be made static because + * it is referenced from brcmstb_pm_s3() + */ +noinline int brcmstb_pm_s3_finish(void) +{ + struct brcmstb_s3_params *params = ctrl.s3_params; + dma_addr_t params_pa = ctrl.s3_params_pa; + phys_addr_t reentry = virt_to_phys(&cpu_resume); + enum bsp_initiate_command cmd; + u32 flags; + + /* + * Clear parameter structure, but not DTU area, which has already been + * filled in. We know DTU is a the end, so we can just subtract its + * size. + */ + memset(params, 0, sizeof(*params) - sizeof(params->dtu)); + + flags = readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS); + + flags &= S3_BOOTLOADER_RESERVED; + flags |= S3_FLAG_NO_MEM_VERIFY; + flags |= S3_FLAG_LOAD_RANDKEY; + + /* Load random / fixed key */ + if (flags & S3_FLAG_LOAD_RANDKEY) + cmd = BSP_GEN_RANDOM_KEY; + else + cmd = BSP_GEN_FIXED_KEY; + if (do_bsp_initiate_command(cmd)) { + pr_info("key loading failed\n"); + return -EIO; + } + + params->magic = BRCMSTB_S3_MAGIC; + params->reentry = reentry; + + /* No more writes to DRAM */ + flush_cache_all(); + + flags |= BRCMSTB_S3_MAGIC_SHORT; + + writel_relaxed(flags, ctrl.aon_sram + AON_REG_MAGIC_FLAGS); + writel_relaxed(lower_32_bits(params_pa), + ctrl.aon_sram + AON_REG_CONTROL_LOW); + writel_relaxed(upper_32_bits(params_pa), + ctrl.aon_sram + AON_REG_CONTROL_HIGH); + + switch (ctrl.s3entry_method) { + case 0: + s3entry_method0(); + brcmstb_do_pmsm_power_down(PM_WARM_CONFIG, false); + break; + case 1: + s3entry_method1(); + brcmstb_do_pmsm_power_down(M1_PM_WARM_CONFIG, true); + break; + default: + return -EINVAL; + } + + /* Must have been interrupted from wfi()? */ + return -EINTR; +} + +static int brcmstb_pm_do_s3(unsigned long sp) +{ + unsigned long save_sp; + int ret; + + asm volatile ( + "mov %[save], sp\n" + "mov sp, %[new]\n" + "bl brcmstb_pm_s3_finish\n" + "mov %[ret], r0\n" + "mov %[new], sp\n" + "mov sp, %[save]\n" + : [save] "=&r" (save_sp), [ret] "=&r" (ret) + : [new] "r" (sp) + ); + + return ret; +} + +static int brcmstb_pm_s3(void) +{ + void __iomem *sp = ctrl.boot_sram + ctrl.boot_sram_len; + + return cpu_suspend((unsigned long)sp, brcmstb_pm_do_s3); +} + +static int brcmstb_pm_standby(bool deep_standby) +{ + int ret; + + if (brcmstb_pm_handshake()) + return -EIO; + + if (deep_standby) + ret = brcmstb_pm_s3(); + else + ret = brcmstb_pm_s2(); + if (ret) + pr_err("%s: standby failed\n", __func__); + + return ret; +} + +static int brcmstb_pm_enter(suspend_state_t state) +{ + int ret = -EINVAL; + + switch (state) { + case PM_SUSPEND_STANDBY: + ret = brcmstb_pm_standby(false); + break; + case PM_SUSPEND_MEM: + ret = brcmstb_pm_standby(true); + break; + } + + return ret; +} + +static int brcmstb_pm_valid(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + return true; + case PM_SUSPEND_MEM: + return ctrl.support_warm_boot; + default: + return false; + } +} + +static const struct platform_suspend_ops brcmstb_pm_ops = { + .enter = brcmstb_pm_enter, + .valid = brcmstb_pm_valid, +}; + +static const struct of_device_id aon_ctrl_dt_ids[] = { + { .compatible = "brcm,brcmstb-aon-ctrl" }, + {} +}; + +struct ddr_phy_ofdata { + bool supports_warm_boot; + size_t pll_status_offset; + int s3entry_method; + u32 warm_boot_offset; + u32 phy_a_standby_ctrl_offs; + u32 phy_b_standby_ctrl_offs; +}; + +static struct ddr_phy_ofdata ddr_phy_71_1 = { + .supports_warm_boot = true, + .pll_status_offset = 0x0c, + .s3entry_method = 1, + .warm_boot_offset = 0x2c, + .phy_a_standby_ctrl_offs = 0x198, + .phy_b_standby_ctrl_offs = DDR_PHY_NO_CHANNEL +}; + +static struct ddr_phy_ofdata ddr_phy_72_0 = { + .supports_warm_boot = true, + .pll_status_offset = 0x10, + .s3entry_method = 1, + .warm_boot_offset = 0x40, + .phy_a_standby_ctrl_offs = 0x2a4, + .phy_b_standby_ctrl_offs = 0x8a4 +}; + +static struct ddr_phy_ofdata ddr_phy_225_1 = { + .supports_warm_boot = false, + .pll_status_offset = 0x4, + .s3entry_method = 0 +}; + +static struct ddr_phy_ofdata ddr_phy_240_1 = { + .supports_warm_boot = true, + .pll_status_offset = 0x4, + .s3entry_method = 0 +}; + +static const struct of_device_id ddr_phy_dt_ids[] = { + { + .compatible = "brcm,brcmstb-ddr-phy-v71.1", + .data = &ddr_phy_71_1, + }, + { + .compatible = "brcm,brcmstb-ddr-phy-v72.0", + .data = &ddr_phy_72_0, + }, + { + .compatible = "brcm,brcmstb-ddr-phy-v225.1", + .data = &ddr_phy_225_1, + }, + { + .compatible = "brcm,brcmstb-ddr-phy-v240.1", + .data = &ddr_phy_240_1, + }, + { + /* Same as v240.1, for the registers we care about */ + .compatible = "brcm,brcmstb-ddr-phy-v240.2", + .data = &ddr_phy_240_1, + }, + {} +}; + +struct ddr_seq_ofdata { + bool needs_ddr_pad; + u32 warm_boot_offset; +}; + +static const struct ddr_seq_ofdata ddr_seq_b22 = { + .needs_ddr_pad = false, + .warm_boot_offset = 0x2c, +}; + +static const struct ddr_seq_ofdata ddr_seq = { + .needs_ddr_pad = true, +}; + +static const struct of_device_id ddr_shimphy_dt_ids[] = { + { .compatible = "brcm,brcmstb-ddr-shimphy-v1.0" }, + {} +}; + +static const struct of_device_id brcmstb_memc_of_match[] = { + { + .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.2", + .data = &ddr_seq_b22, + }, + { + .compatible = "brcm,brcmstb-memc-ddr", + .data = &ddr_seq, + }, + {}, +}; + +static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches, + int index, const void **ofdata) +{ + struct device_node *dn; + const struct of_device_id *match; + + dn = of_find_matching_node_and_match(NULL, matches, &match); + if (!dn) + return ERR_PTR(-EINVAL); + + if (ofdata) + *ofdata = match->data; + + return of_io_request_and_map(dn, index, dn->full_name); +} + +static int brcmstb_pm_panic_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + writel_relaxed(BRCMSTB_PANIC_MAGIC, ctrl.aon_sram + AON_REG_PANIC); + + return NOTIFY_DONE; +} + +static struct notifier_block brcmstb_pm_panic_nb = { + .notifier_call = brcmstb_pm_panic_notify, +}; + +static int brcmstb_pm_probe(struct platform_device *pdev) +{ + const struct ddr_phy_ofdata *ddr_phy_data; + const struct ddr_seq_ofdata *ddr_seq_data; + const struct of_device_id *of_id = NULL; + struct device_node *dn; + void __iomem *base; + int ret, i; + + /* AON ctrl registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping AON_CTRL\n"); + return PTR_ERR(base); + } + ctrl.aon_ctrl_base = base; + + /* AON SRAM registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL); + if (IS_ERR(base)) { + /* Assume standard offset */ + ctrl.aon_sram = ctrl.aon_ctrl_base + + AON_CTRL_SYSTEM_DATA_RAM_OFS; + } else { + ctrl.aon_sram = base; + } + + writel_relaxed(0, ctrl.aon_sram + AON_REG_PANIC); + + /* DDR PHY registers */ + base = brcmstb_ioremap_match(ddr_phy_dt_ids, 0, + (const void **)&ddr_phy_data); + if (IS_ERR(base)) { + pr_err("error mapping DDR PHY\n"); + return PTR_ERR(base); + } + ctrl.support_warm_boot = ddr_phy_data->supports_warm_boot; + ctrl.pll_status_offset = ddr_phy_data->pll_status_offset; + /* Only need DDR PHY 0 for now? */ + ctrl.memcs[0].ddr_phy_base = base; + ctrl.s3entry_method = ddr_phy_data->s3entry_method; + ctrl.phy_a_standby_ctrl_offs = ddr_phy_data->phy_a_standby_ctrl_offs; + ctrl.phy_b_standby_ctrl_offs = ddr_phy_data->phy_b_standby_ctrl_offs; + /* + * Slightly grosss to use the phy ver to get a memc, + * offset but that is the only versioned things so far + * we can test for. + */ + ctrl.warm_boot_offset = ddr_phy_data->warm_boot_offset; + + /* DDR SHIM-PHY registers */ + for_each_matching_node(dn, ddr_shimphy_dt_ids) { + i = ctrl.num_memc; + if (i >= MAX_NUM_MEMC) { + pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC); + break; + } + + base = of_io_request_and_map(dn, 0, dn->full_name); + if (IS_ERR(base)) { + if (!ctrl.support_warm_boot) + break; + + pr_err("error mapping DDR SHIMPHY %d\n", i); + return PTR_ERR(base); + } + ctrl.memcs[i].ddr_shimphy_base = base; + ctrl.num_memc++; + } + + /* Sequencer DRAM Param and Control Registers */ + i = 0; + for_each_matching_node(dn, brcmstb_memc_of_match) { + base = of_iomap(dn, 0); + if (!base) { + pr_err("error mapping DDR Sequencer %d\n", i); + return -ENOMEM; + } + + of_id = of_match_node(brcmstb_memc_of_match, dn); + if (!of_id) { + iounmap(base); + return -EINVAL; + } + + ddr_seq_data = of_id->data; + ctrl.needs_ddr_pad = ddr_seq_data->needs_ddr_pad; + /* Adjust warm boot offset based on the DDR sequencer */ + if (ddr_seq_data->warm_boot_offset) + ctrl.warm_boot_offset = ddr_seq_data->warm_boot_offset; + + ctrl.memcs[i].ddr_ctrl = base; + i++; + } + + pr_debug("PM: supports warm boot:%d, method:%d, wboffs:%x\n", + ctrl.support_warm_boot, ctrl.s3entry_method, + ctrl.warm_boot_offset); + + dn = of_find_matching_node(NULL, sram_dt_ids); + if (!dn) { + pr_err("SRAM not found\n"); + return -EINVAL; + } + + ret = brcmstb_init_sram(dn); + if (ret) { + pr_err("error setting up SRAM for PM\n"); + return ret; + } + + ctrl.pdev = pdev; + + ctrl.s3_params = kmalloc(sizeof(*ctrl.s3_params), GFP_KERNEL); + if (!ctrl.s3_params) + return -ENOMEM; + ctrl.s3_params_pa = dma_map_single(&pdev->dev, ctrl.s3_params, + sizeof(*ctrl.s3_params), + DMA_TO_DEVICE); + if (dma_mapping_error(&pdev->dev, ctrl.s3_params_pa)) { + pr_err("error mapping DMA memory\n"); + ret = -ENOMEM; + goto out; + } + + atomic_notifier_chain_register(&panic_notifier_list, + &brcmstb_pm_panic_nb); + + pm_power_off = brcmstb_pm_poweroff; + suspend_set_ops(&brcmstb_pm_ops); + + return 0; + +out: + kfree(ctrl.s3_params); + + pr_warn("PM: initialization failed with code %d\n", ret); + + return ret; +} + +static struct platform_driver brcmstb_pm_driver = { + .driver = { + .name = "brcmstb-pm", + .of_match_table = aon_ctrl_dt_ids, + }, +}; + +static int __init brcmstb_pm_init(void) +{ + return platform_driver_probe(&brcmstb_pm_driver, + brcmstb_pm_probe); +} +module_init(brcmstb_pm_init); diff --git a/drivers/soc/bcm/brcmstb/pm/pm-mips.c b/drivers/soc/bcm/brcmstb/pm/pm-mips.c new file mode 100644 index 000000000000..9300b5f62e56 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/pm-mips.c @@ -0,0 +1,461 @@ +/* + * MIPS-specific support for Broadcom STB S2/S3/S5 power management + * + * Copyright (C) 2016-2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/printk.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/delay.h> +#include <linux/suspend.h> +#include <asm/bmips.h> +#include <asm/tlbflush.h> + +#include "pm.h" + +#define S2_NUM_PARAMS 6 +#define MAX_NUM_MEMC 3 + +/* S3 constants */ +#define MAX_GP_REGS 16 +#define MAX_CP0_REGS 32 +#define NUM_MEMC_CLIENTS 128 +#define AON_CTRL_RAM_SIZE 128 +#define BRCMSTB_S3_MAGIC 0x5AFEB007 + +#define CLEAR_RESET_MASK 0x01 + +/* Index each CP0 register that needs to be saved */ +#define CONTEXT 0 +#define USER_LOCAL 1 +#define PGMK 2 +#define HWRENA 3 +#define COMPARE 4 +#define STATUS 5 +#define CONFIG 6 +#define MODE 7 +#define EDSP 8 +#define BOOT_VEC 9 +#define EBASE 10 + +struct brcmstb_memc { + void __iomem *ddr_phy_base; + void __iomem *arb_base; +}; + +struct brcmstb_pm_control { + void __iomem *aon_ctrl_base; + void __iomem *aon_sram_base; + void __iomem *timers_base; + struct brcmstb_memc memcs[MAX_NUM_MEMC]; + int num_memc; +}; + +struct brcm_pm_s3_context { + u32 cp0_regs[MAX_CP0_REGS]; + u32 memc0_rts[NUM_MEMC_CLIENTS]; + u32 sc_boot_vec; +}; + +struct brcmstb_mem_transfer; + +struct brcmstb_mem_transfer { + struct brcmstb_mem_transfer *next; + void *src; + void *dst; + dma_addr_t pa_src; + dma_addr_t pa_dst; + u32 len; + u8 key; + u8 mode; + u8 src_remapped; + u8 dst_remapped; + u8 src_dst_remapped; +}; + +#define AON_SAVE_SRAM(base, idx, val) \ + __raw_writel(val, base + (idx << 2)) + +/* Used for saving registers in asm */ +u32 gp_regs[MAX_GP_REGS]; + +#define BSP_CLOCK_STOP 0x00 +#define PM_INITIATE 0x01 + +static struct brcmstb_pm_control ctrl; + +static void brcm_pm_save_cp0_context(struct brcm_pm_s3_context *ctx) +{ + /* Generic MIPS */ + ctx->cp0_regs[CONTEXT] = read_c0_context(); + ctx->cp0_regs[USER_LOCAL] = read_c0_userlocal(); + ctx->cp0_regs[PGMK] = read_c0_pagemask(); + ctx->cp0_regs[HWRENA] = read_c0_cache(); + ctx->cp0_regs[COMPARE] = read_c0_compare(); + ctx->cp0_regs[STATUS] = read_c0_status(); + + /* Broadcom specific */ + ctx->cp0_regs[CONFIG] = read_c0_brcm_config(); + ctx->cp0_regs[MODE] = read_c0_brcm_mode(); + ctx->cp0_regs[EDSP] = read_c0_brcm_edsp(); + ctx->cp0_regs[BOOT_VEC] = read_c0_brcm_bootvec(); + ctx->cp0_regs[EBASE] = read_c0_ebase(); + + ctx->sc_boot_vec = bmips_read_zscm_reg(0xa0); +} + +static void brcm_pm_restore_cp0_context(struct brcm_pm_s3_context *ctx) +{ + /* Restore cp0 state */ + bmips_write_zscm_reg(0xa0, ctx->sc_boot_vec); + + /* Generic MIPS */ + write_c0_context(ctx->cp0_regs[CONTEXT]); + write_c0_userlocal(ctx->cp0_regs[USER_LOCAL]); + write_c0_pagemask(ctx->cp0_regs[PGMK]); + write_c0_cache(ctx->cp0_regs[HWRENA]); + write_c0_compare(ctx->cp0_regs[COMPARE]); + write_c0_status(ctx->cp0_regs[STATUS]); + + /* Broadcom specific */ + write_c0_brcm_config(ctx->cp0_regs[CONFIG]); + write_c0_brcm_mode(ctx->cp0_regs[MODE]); + write_c0_brcm_edsp(ctx->cp0_regs[EDSP]); + write_c0_brcm_bootvec(ctx->cp0_regs[BOOT_VEC]); + write_c0_ebase(ctx->cp0_regs[EBASE]); +} + +static void brcmstb_pm_handshake(void) +{ + void __iomem *base = ctrl.aon_ctrl_base; + u32 tmp; + + /* BSP power handshake, v1 */ + tmp = __raw_readl(base + AON_CTRL_HOST_MISC_CMDS); + tmp &= ~1UL; + __raw_writel(tmp, base + AON_CTRL_HOST_MISC_CMDS); + (void)__raw_readl(base + AON_CTRL_HOST_MISC_CMDS); + + __raw_writel(0, base + AON_CTRL_PM_INITIATE); + (void)__raw_readl(base + AON_CTRL_PM_INITIATE); + __raw_writel(BSP_CLOCK_STOP | PM_INITIATE, + base + AON_CTRL_PM_INITIATE); + /* + * HACK: BSP may have internal race on the CLOCK_STOP command. + * Avoid touching the BSP for a few milliseconds. + */ + mdelay(3); +} + +static void brcmstb_pm_s5(void) +{ + void __iomem *base = ctrl.aon_ctrl_base; + + brcmstb_pm_handshake(); + + /* Clear magic s3 warm-boot value */ + AON_SAVE_SRAM(ctrl.aon_sram_base, 0, 0); + + /* Set the countdown */ + __raw_writel(0x10, base + AON_CTRL_PM_CPU_WAIT_COUNT); + (void)__raw_readl(base + AON_CTRL_PM_CPU_WAIT_COUNT); + + /* Prepare to S5 cold boot */ + __raw_writel(PM_COLD_CONFIG, base + AON_CTRL_PM_CTRL); + (void)__raw_readl(base + AON_CTRL_PM_CTRL); + + __raw_writel((PM_COLD_CONFIG | PM_PWR_DOWN), base + + AON_CTRL_PM_CTRL); + (void)__raw_readl(base + AON_CTRL_PM_CTRL); + + __asm__ __volatile__( + " wait\n" + : : : "memory"); +} + +static int brcmstb_pm_s3(void) +{ + struct brcm_pm_s3_context s3_context; + void __iomem *memc_arb_base; + unsigned long flags; + u32 tmp; + int i; + + /* Prepare for s3 */ + AON_SAVE_SRAM(ctrl.aon_sram_base, 0, BRCMSTB_S3_MAGIC); + AON_SAVE_SRAM(ctrl.aon_sram_base, 1, (u32)&s3_reentry); + AON_SAVE_SRAM(ctrl.aon_sram_base, 2, 0); + + /* Clear RESET_HISTORY */ + tmp = __raw_readl(ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL); + tmp &= ~CLEAR_RESET_MASK; + __raw_writel(tmp, ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL); + + local_irq_save(flags); + + /* Inhibit DDR_RSTb pulse for both MMCs*/ + for (i = 0; i < ctrl.num_memc; i++) { + tmp = __raw_readl(ctrl.memcs[i].ddr_phy_base + + DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); + + tmp &= ~0x0f; + __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base + + DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); + tmp |= (0x05 | BIT(5)); + __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base + + DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL); + } + + /* Save CP0 context */ + brcm_pm_save_cp0_context(&s3_context); + + /* Save RTS(skip debug register) */ + memc_arb_base = ctrl.memcs[0].arb_base + 4; + for (i = 0; i < NUM_MEMC_CLIENTS; i++) { + s3_context.memc0_rts[i] = __raw_readl(memc_arb_base); + memc_arb_base += 4; + } + + /* Save I/O context */ + local_flush_tlb_all(); + _dma_cache_wback_inv(0, ~0); + + brcm_pm_do_s3(ctrl.aon_ctrl_base, current_cpu_data.dcache.linesz); + + /* CPU reconfiguration */ + local_flush_tlb_all(); + bmips_cpu_setup(); + cpumask_clear(&bmips_booted_mask); + + /* Restore RTS (skip debug register) */ + memc_arb_base = ctrl.memcs[0].arb_base + 4; + for (i = 0; i < NUM_MEMC_CLIENTS; i++) { + __raw_writel(s3_context.memc0_rts[i], memc_arb_base); + memc_arb_base += 4; + } + + /* restore CP0 context */ + brcm_pm_restore_cp0_context(&s3_context); + + local_irq_restore(flags); + + return 0; +} + +static int brcmstb_pm_s2(void) +{ + /* + * We need to pass 6 arguments to an assembly function. Lets avoid the + * stack and pass arguments in a explicit 4 byte array. The assembly + * code assumes all arguments are 4 bytes and arguments are ordered + * like so: + * + * 0: AON_CTRl base register + * 1: DDR_PHY base register + * 2: TIMERS base resgister + * 3: I-Cache line size + * 4: Restart vector address + * 5: Restart vector size + */ + u32 s2_params[6]; + + /* Prepare s2 parameters */ + s2_params[0] = (u32)ctrl.aon_ctrl_base; + s2_params[1] = (u32)ctrl.memcs[0].ddr_phy_base; + s2_params[2] = (u32)ctrl.timers_base; + s2_params[3] = (u32)current_cpu_data.icache.linesz; + s2_params[4] = (u32)BMIPS_WARM_RESTART_VEC; + s2_params[5] = (u32)(bmips_smp_int_vec_end - + bmips_smp_int_vec); + + /* Drop to standby */ + brcm_pm_do_s2(s2_params); + + return 0; +} + +static int brcmstb_pm_standby(bool deep_standby) +{ + brcmstb_pm_handshake(); + + /* Send IRQs to BMIPS_WARM_RESTART_VEC */ + clear_c0_cause(CAUSEF_IV); + irq_disable_hazard(); + set_c0_status(ST0_BEV); + irq_disable_hazard(); + + if (deep_standby) + brcmstb_pm_s3(); + else + brcmstb_pm_s2(); + + /* Send IRQs to normal runtime vectors */ + clear_c0_status(ST0_BEV); + irq_disable_hazard(); + set_c0_cause(CAUSEF_IV); + irq_disable_hazard(); + + return 0; +} + +static int brcmstb_pm_enter(suspend_state_t state) +{ + int ret = -EINVAL; + + switch (state) { + case PM_SUSPEND_STANDBY: + ret = brcmstb_pm_standby(false); + break; + case PM_SUSPEND_MEM: + ret = brcmstb_pm_standby(true); + break; + } + + return ret; +} + +static int brcmstb_pm_valid(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + return true; + case PM_SUSPEND_MEM: + return true; + default: + return false; + } +} + +static const struct platform_suspend_ops brcmstb_pm_ops = { + .enter = brcmstb_pm_enter, + .valid = brcmstb_pm_valid, +}; + +static const struct of_device_id aon_ctrl_dt_ids[] = { + { .compatible = "brcm,brcmstb-aon-ctrl" }, + { /* sentinel */ } +}; + +static const struct of_device_id ddr_phy_dt_ids[] = { + { .compatible = "brcm,brcmstb-ddr-phy" }, + { /* sentinel */ } +}; + +static const struct of_device_id arb_dt_ids[] = { + { .compatible = "brcm,brcmstb-memc-arb" }, + { /* sentinel */ } +}; + +static const struct of_device_id timers_ids[] = { + { .compatible = "brcm,brcmstb-timers" }, + { /* sentinel */ } +}; + +static inline void __iomem *brcmstb_ioremap_node(struct device_node *dn, + int index) +{ + return of_io_request_and_map(dn, index, dn->full_name); +} + +static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches, + int index, const void **ofdata) +{ + struct device_node *dn; + const struct of_device_id *match; + + dn = of_find_matching_node_and_match(NULL, matches, &match); + if (!dn) + return ERR_PTR(-EINVAL); + + if (ofdata) + *ofdata = match->data; + + return brcmstb_ioremap_node(dn, index); +} + +static int brcmstb_pm_init(void) +{ + struct device_node *dn; + void __iomem *base; + int i; + + /* AON ctrl registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping AON_CTRL\n"); + goto aon_err; + } + ctrl.aon_ctrl_base = base; + + /* AON SRAM registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL); + if (IS_ERR(base)) { + pr_err("error mapping AON_SRAM\n"); + goto sram_err; + } + ctrl.aon_sram_base = base; + + ctrl.num_memc = 0; + /* Map MEMC DDR PHY registers */ + for_each_matching_node(dn, ddr_phy_dt_ids) { + i = ctrl.num_memc; + if (i >= MAX_NUM_MEMC) { + pr_warn("Too many MEMCs (max %d)\n", MAX_NUM_MEMC); + break; + } + base = brcmstb_ioremap_node(dn, 0); + if (IS_ERR(base)) + goto ddr_err; + + ctrl.memcs[i].ddr_phy_base = base; + ctrl.num_memc++; + } + + /* MEMC ARB registers */ + base = brcmstb_ioremap_match(arb_dt_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping MEMC ARB\n"); + goto ddr_err; + } + ctrl.memcs[0].arb_base = base; + + /* Timer registers */ + base = brcmstb_ioremap_match(timers_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping timers\n"); + goto tmr_err; + } + ctrl.timers_base = base; + + /* s3 cold boot aka s5 */ + pm_power_off = brcmstb_pm_s5; + + suspend_set_ops(&brcmstb_pm_ops); + + return 0; + +tmr_err: + iounmap(ctrl.memcs[0].arb_base); +ddr_err: + for (i = 0; i < ctrl.num_memc; i++) + iounmap(ctrl.memcs[i].ddr_phy_base); + + iounmap(ctrl.aon_sram_base); +sram_err: + iounmap(ctrl.aon_ctrl_base); +aon_err: + return PTR_ERR(base); +} +arch_initcall(brcmstb_pm_init); diff --git a/drivers/soc/bcm/brcmstb/pm/pm.h b/drivers/soc/bcm/brcmstb/pm/pm.h new file mode 100644 index 000000000000..b7d35ac70e60 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/pm.h @@ -0,0 +1,89 @@ +/* + * Definitions for Broadcom STB power management / Always ON (AON) block + * + * Copyright © 2016-2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __BRCMSTB_PM_H__ +#define __BRCMSTB_PM_H__ + +#define AON_CTRL_RESET_CTRL 0x00 +#define AON_CTRL_PM_CTRL 0x04 +#define AON_CTRL_PM_STATUS 0x08 +#define AON_CTRL_PM_CPU_WAIT_COUNT 0x10 +#define AON_CTRL_PM_INITIATE 0x88 +#define AON_CTRL_HOST_MISC_CMDS 0x8c +#define AON_CTRL_SYSTEM_DATA_RAM_OFS 0x200 + +/* MIPS PM constants */ +/* MEMC0 offsets */ +#define DDR40_PHY_CONTROL_REGS_0_PLL_STATUS 0x10 +#define DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL 0xa4 + +/* TIMER offsets */ +#define TIMER_TIMER1_CTRL 0x0c +#define TIMER_TIMER1_STAT 0x1c + +/* TIMER defines */ +#define RESET_TIMER 0x0 +#define START_TIMER 0xbfffffff +#define TIMER_MASK 0x3fffffff + +/* PM_CTRL bitfield (Method #0) */ +#define PM_FAST_PWRDOWN (1 << 6) +#define PM_WARM_BOOT (1 << 5) +#define PM_DEEP_STANDBY (1 << 4) +#define PM_CPU_PWR (1 << 3) +#define PM_USE_CPU_RDY (1 << 2) +#define PM_PLL_PWRDOWN (1 << 1) +#define PM_PWR_DOWN (1 << 0) + +/* PM_CTRL bitfield (Method #1) */ +#define PM_DPHY_STANDBY_CLEAR (1 << 20) +#define PM_MIN_S3_WIDTH_TIMER_BYPASS (1 << 7) + +#define PM_S2_COMMAND (PM_PLL_PWRDOWN | PM_USE_CPU_RDY | PM_PWR_DOWN) + +/* Method 0 bitmasks */ +#define PM_COLD_CONFIG (PM_PLL_PWRDOWN | PM_DEEP_STANDBY) +#define PM_WARM_CONFIG (PM_COLD_CONFIG | PM_USE_CPU_RDY | PM_WARM_BOOT) + +/* Method 1 bitmask */ +#define M1_PM_WARM_CONFIG (PM_DPHY_STANDBY_CLEAR | \ + PM_MIN_S3_WIDTH_TIMER_BYPASS | \ + PM_WARM_BOOT | PM_DEEP_STANDBY | \ + PM_PLL_PWRDOWN | PM_PWR_DOWN) + +#define M1_PM_COLD_CONFIG (PM_DPHY_STANDBY_CLEAR | \ + PM_MIN_S3_WIDTH_TIMER_BYPASS | \ + PM_DEEP_STANDBY | \ + PM_PLL_PWRDOWN | PM_PWR_DOWN) + +#ifndef __ASSEMBLY__ + +#ifndef CONFIG_MIPS +extern const unsigned long brcmstb_pm_do_s2_sz; +extern asmlinkage int brcmstb_pm_do_s2(void __iomem *aon_ctrl_base, + void __iomem *ddr_phy_pll_status); +#else +/* s2 asm */ +extern asmlinkage int brcm_pm_do_s2(u32 *s2_params); + +/* s3 asm */ +extern asmlinkage int brcm_pm_do_s3(void __iomem *aon_ctrl_base, + int dcache_linesz); +extern int s3_reentry; +#endif /* CONFIG_MIPS */ + +#endif + +#endif /* __BRCMSTB_PM_H__ */ diff --git a/drivers/soc/bcm/brcmstb/pm/s2-arm.S b/drivers/soc/bcm/brcmstb/pm/s2-arm.S new file mode 100644 index 000000000000..1d472d564638 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/s2-arm.S @@ -0,0 +1,76 @@ +/* + * Copyright © 2014-2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +#include "pm.h" + + .text + .align 3 + +#define AON_CTRL_REG r10 +#define DDR_PHY_STATUS_REG r11 + +/* + * r0: AON_CTRL base address + * r1: DDRY PHY PLL status register address + */ +ENTRY(brcmstb_pm_do_s2) + stmfd sp!, {r4-r11, lr} + mov AON_CTRL_REG, r0 + mov DDR_PHY_STATUS_REG, r1 + + /* Flush memory transactions */ + dsb + + /* Cache DDR_PHY_STATUS_REG translation */ + ldr r0, [DDR_PHY_STATUS_REG] + + /* power down request */ + ldr r0, =PM_S2_COMMAND + ldr r1, =0 + str r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL] + ldr r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL] + str r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL] + ldr r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL] + + /* Wait for interrupt */ + wfi + nop + + /* Bring MEMC back up */ +1: ldr r0, [DDR_PHY_STATUS_REG] + ands r0, #1 + beq 1b + + /* Power-up handshake */ + ldr r0, =1 + str r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS] + ldr r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS] + + ldr r0, =0 + str r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL] + ldr r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL] + + /* Return to caller */ + ldr r0, =0 + ldmfd sp!, {r4-r11, pc} + + ENDPROC(brcmstb_pm_do_s2) + + /* Place literal pool here */ + .ltorg + +ENTRY(brcmstb_pm_do_s2_sz) + .word . - brcmstb_pm_do_s2 diff --git a/drivers/soc/bcm/brcmstb/pm/s2-mips.S b/drivers/soc/bcm/brcmstb/pm/s2-mips.S new file mode 100644 index 000000000000..27a14bc46043 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/s2-mips.S @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2016 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/asm.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> + +#include "pm.h" + + .text + .set noreorder + .align 5 + +/* + * a0: u32 params array + */ +LEAF(brcm_pm_do_s2) + + subu sp, 64 + sw ra, 0(sp) + sw s0, 4(sp) + sw s1, 8(sp) + sw s2, 12(sp) + sw s3, 16(sp) + sw s4, 20(sp) + sw s5, 24(sp) + sw s6, 28(sp) + sw s7, 32(sp) + + /* + * Dereference the params array + * s0: AON_CTRL base register + * s1: DDR_PHY base register + * s2: TIMERS base register + * s3: I-Cache line size + * s4: Restart vector address + * s5: Restart vector size + */ + move t0, a0 + + lw s0, 0(t0) + lw s1, 4(t0) + lw s2, 8(t0) + lw s3, 12(t0) + lw s4, 16(t0) + lw s5, 20(t0) + + /* Lock this asm section into the I-cache */ + addiu t1, s3, -1 + not t1 + + la t0, brcm_pm_do_s2 + and t0, t1 + + la t2, asm_end + and t2, t1 + +1: cache 0x1c, 0(t0) + bne t0, t2, 1b + addu t0, s3 + + /* Lock the interrupt vector into the I-cache */ + move t0, zero + +2: move t1, s4 + cache 0x1c, 0(t1) + addu t1, s3 + addu t0, s3 + ble t0, s5, 2b + nop + + sync + + /* Power down request */ + li t0, PM_S2_COMMAND + sw zero, AON_CTRL_PM_CTRL(s0) + lw zero, AON_CTRL_PM_CTRL(s0) + sw t0, AON_CTRL_PM_CTRL(s0) + lw t0, AON_CTRL_PM_CTRL(s0) + + /* Enable CP0 interrupt 2 and wait for interrupt */ + mfc0 t0, CP0_STATUS + /* Save cp0 sr for restoring later */ + move s6, t0 + + li t1, ~(ST0_IM | ST0_IE) + and t0, t1 + ori t0, STATUSF_IP2 + mtc0 t0, CP0_STATUS + nop + nop + nop + ori t0, ST0_IE + mtc0 t0, CP0_STATUS + + /* Wait for interrupt */ + wait + nop + + /* Wait for memc0 */ +1: lw t0, DDR40_PHY_CONTROL_REGS_0_PLL_STATUS(s1) + andi t0, 1 + beqz t0, 1b + nop + + /* 1ms delay needed for stable recovery */ + /* Use TIMER1 to count 1 ms */ + li t0, RESET_TIMER + sw t0, TIMER_TIMER1_CTRL(s2) + lw t0, TIMER_TIMER1_CTRL(s2) + + li t0, START_TIMER + sw t0, TIMER_TIMER1_CTRL(s2) + lw t0, TIMER_TIMER1_CTRL(s2) + + /* Prepare delay */ + li t0, TIMER_MASK + lw t1, TIMER_TIMER1_STAT(s2) + and t1, t0 + /* 1ms delay */ + addi t1, 27000 + + /* Wait for the timer value to exceed t1 */ +1: lw t0, TIMER_TIMER1_STAT(s2) + sgtu t2, t1, t0 + bnez t2, 1b + nop + + /* Power back up */ + li t1, 1 + sw t1, AON_CTRL_HOST_MISC_CMDS(s0) + lw t1, AON_CTRL_HOST_MISC_CMDS(s0) + + sw zero, AON_CTRL_PM_CTRL(s0) + lw zero, AON_CTRL_PM_CTRL(s0) + + /* Unlock I-cache */ + addiu t1, s3, -1 + not t1 + + la t0, brcm_pm_do_s2 + and t0, t1 + + la t2, asm_end + and t2, t1 + +1: cache 0x00, 0(t0) + bne t0, t2, 1b + addu t0, s3 + + /* Unlock interrupt vector */ + move t0, zero + +2: move t1, s4 + cache 0x00, 0(t1) + addu t1, s3 + addu t0, s3 + ble t0, s5, 2b + nop + + /* Restore cp0 sr */ + sync + nop + mtc0 s6, CP0_STATUS + nop + + /* Set return value to success */ + li v0, 0 + + /* Return to caller */ + lw s7, 32(sp) + lw s6, 28(sp) + lw s5, 24(sp) + lw s4, 20(sp) + lw s3, 16(sp) + lw s2, 12(sp) + lw s1, 8(sp) + lw s0, 4(sp) + lw ra, 0(sp) + addiu sp, 64 + + jr ra + nop +END(brcm_pm_do_s2) + + .globl asm_end +asm_end: + nop + diff --git a/drivers/soc/bcm/brcmstb/pm/s3-mips.S b/drivers/soc/bcm/brcmstb/pm/s3-mips.S new file mode 100644 index 000000000000..1242308a8868 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/s3-mips.S @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2016 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/asm.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/bmips.h> + +#include "pm.h" + + .text + .set noreorder + .align 5 + .global s3_reentry + +/* + * a0: AON_CTRL base register + * a1: D-Cache line size + */ +LEAF(brcm_pm_do_s3) + + /* Get the address of s3_context */ + la t0, gp_regs + sw ra, 0(t0) + sw s0, 4(t0) + sw s1, 8(t0) + sw s2, 12(t0) + sw s3, 16(t0) + sw s4, 20(t0) + sw s5, 24(t0) + sw s6, 28(t0) + sw s7, 32(t0) + sw gp, 36(t0) + sw sp, 40(t0) + sw fp, 44(t0) + + /* Save CP0 Status */ + mfc0 t1, CP0_STATUS + sw t1, 48(t0) + + /* Write-back gp registers - cache will be gone */ + addiu t1, a1, -1 + not t1 + and t0, t1 + + /* Flush at least 64 bytes */ + addiu t2, t0, 64 + and t2, t1 + +1: cache 0x17, 0(t0) + bne t0, t2, 1b + addu t0, a1 + + /* Drop to deep standby */ + li t1, PM_WARM_CONFIG + sw zero, AON_CTRL_PM_CTRL(a0) + lw zero, AON_CTRL_PM_CTRL(a0) + sw t1, AON_CTRL_PM_CTRL(a0) + lw t1, AON_CTRL_PM_CTRL(a0) + + li t1, (PM_WARM_CONFIG | PM_PWR_DOWN) + sw t1, AON_CTRL_PM_CTRL(a0) + lw t1, AON_CTRL_PM_CTRL(a0) + + /* Enable CP0 interrupt 2 and wait for interrupt */ + mfc0 t0, CP0_STATUS + + li t1, ~(ST0_IM | ST0_IE) + and t0, t1 + ori t0, STATUSF_IP2 + mtc0 t0, CP0_STATUS + nop + nop + nop + ori t0, ST0_IE + mtc0 t0, CP0_STATUS + + /* Wait for interrupt */ + wait + nop + +s3_reentry: + + /* Clear call/return stack */ + li t0, (0x06 << 16) + mtc0 t0, $22, 2 + ssnop + ssnop + ssnop + + /* Clear jump target buffer */ + li t0, (0x04 << 16) + mtc0 t0, $22, 2 + ssnop + ssnop + ssnop + + sync + nop + + /* Setup mmu defaults */ + mtc0 zero, CP0_WIRED + mtc0 zero, CP0_ENTRYHI + li k0, PM_DEFAULT_MASK + mtc0 k0, CP0_PAGEMASK + + li sp, BMIPS_WARM_RESTART_VEC + la k0, plat_wired_tlb_setup + jalr k0 + nop + + /* Restore general purpose registers */ + la t0, gp_regs + lw fp, 44(t0) + lw sp, 40(t0) + lw gp, 36(t0) + lw s7, 32(t0) + lw s6, 28(t0) + lw s5, 24(t0) + lw s4, 20(t0) + lw s3, 16(t0) + lw s2, 12(t0) + lw s1, 8(t0) + lw s0, 4(t0) + lw ra, 0(t0) + + /* Restore CP0 status */ + lw t1, 48(t0) + mtc0 t1, CP0_STATUS + + /* Return to caller */ + li v0, 0 + jr ra + nop + +END(brcm_pm_do_s3) diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig index 567414cb42ba..09550b1da56d 100644 --- a/drivers/soc/renesas/Kconfig +++ b/drivers/soc/renesas/Kconfig @@ -3,7 +3,8 @@ config SOC_RENESAS default y if ARCH_RENESAS select SOC_BUS select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \ - ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77995 + ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77970 || \ + ARCH_R8A77995 select SYSC_R8A7743 if ARCH_R8A7743 select SYSC_R8A7745 if ARCH_R8A7745 select SYSC_R8A7779 if ARCH_R8A7779 @@ -13,6 +14,7 @@ config SOC_RENESAS select SYSC_R8A7794 if ARCH_R8A7794 select SYSC_R8A7795 if ARCH_R8A7795 select SYSC_R8A7796 if ARCH_R8A7796 + select SYSC_R8A77970 if ARCH_R8A77970 select SYSC_R8A77995 if ARCH_R8A77995 if SOC_RENESAS @@ -54,6 +56,10 @@ config SYSC_R8A7796 bool "R-Car M3-W System Controller support" if COMPILE_TEST select SYSC_RCAR +config SYSC_R8A77970 + bool "R-Car V3M System Controller support" if COMPILE_TEST + select SYSC_RCAR + config SYSC_R8A77995 bool "R-Car D3 System Controller support" if COMPILE_TEST select SYSC_RCAR diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index 6b6e7f16104c..8334af1d231b 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_SYSC_R8A7792) += r8a7792-sysc.o obj-$(CONFIG_SYSC_R8A7794) += r8a7794-sysc.o obj-$(CONFIG_SYSC_R8A7795) += r8a7795-sysc.o obj-$(CONFIG_SYSC_R8A7796) += r8a7796-sysc.o +obj-$(CONFIG_SYSC_R8A77970) += r8a77970-sysc.o obj-$(CONFIG_SYSC_R8A77995) += r8a77995-sysc.o # Family diff --git a/drivers/soc/renesas/r8a77970-sysc.c b/drivers/soc/renesas/r8a77970-sysc.c new file mode 100644 index 000000000000..8c614164718e --- /dev/null +++ b/drivers/soc/renesas/r8a77970-sysc.c @@ -0,0 +1,39 @@ +/* + * Renesas R-Car V3M System Controller + * + * Copyright (C) 2017 Cogent Embedded Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bug.h> +#include <linux/kernel.h> + +#include <dt-bindings/power/r8a77970-sysc.h> + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a77970_areas[] __initconst = { + { "always-on", 0, 0, R8A77970_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca53-scu", 0x140, 0, R8A77970_PD_CA53_SCU, R8A77970_PD_ALWAYS_ON, + PD_SCU }, + { "ca53-cpu0", 0x200, 0, R8A77970_PD_CA53_CPU0, R8A77970_PD_CA53_SCU, + PD_CPU_NOCR }, + { "ca53-cpu1", 0x200, 1, R8A77970_PD_CA53_CPU1, R8A77970_PD_CA53_SCU, + PD_CPU_NOCR }, + { "cr7", 0x240, 0, R8A77970_PD_CR7, R8A77970_PD_ALWAYS_ON }, + { "a3ir", 0x180, 0, R8A77970_PD_A3IR, R8A77970_PD_ALWAYS_ON }, + { "a2ir0", 0x400, 0, R8A77970_PD_A2IR0, R8A77970_PD_ALWAYS_ON }, + { "a2ir1", 0x400, 1, R8A77970_PD_A2IR1, R8A77970_PD_A2IR0 }, + { "a2ir2", 0x400, 2, R8A77970_PD_A2IR2, R8A77970_PD_A2IR0 }, + { "a2ir3", 0x400, 3, R8A77970_PD_A2IR3, R8A77970_PD_A2IR0 }, + { "a2sc0", 0x400, 4, R8A77970_PD_A2SC0, R8A77970_PD_ALWAYS_ON }, + { "a2sc1", 0x400, 5, R8A77970_PD_A2SC1, R8A77970_PD_A2SC0 }, +}; + +const struct rcar_sysc_info r8a77970_sysc_info __initconst = { + .areas = r8a77970_areas, + .num_areas = ARRAY_SIZE(r8a77970_areas), +}; diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c index baa47014e96b..3316b028f231 100644 --- a/drivers/soc/renesas/rcar-rst.c +++ b/drivers/soc/renesas/rcar-rst.c @@ -41,6 +41,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = { /* R-Car Gen3 is handled like R-Car Gen2 */ { .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen2 }, { .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen2 }, + { .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen2 }, { .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen2 }, { /* sentinel */ } }; diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index c8406e81640f..55a47e509e49 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -284,6 +284,9 @@ static const struct of_device_id rcar_sysc_matches[] = { #ifdef CONFIG_SYSC_R8A7796 { .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info }, #endif +#ifdef CONFIG_SYSC_R8A77970 + { .compatible = "renesas,r8a77970-sysc", .data = &r8a77970_sysc_info }, +#endif #ifdef CONFIG_SYSC_R8A77995 { .compatible = "renesas,r8a77995-sysc", .data = &r8a77995_sysc_info }, #endif diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index 2f524922c4d2..9d9daf9eb91b 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -58,6 +58,7 @@ extern const struct rcar_sysc_info r8a7792_sysc_info; extern const struct rcar_sysc_info r8a7794_sysc_info; extern const struct rcar_sysc_info r8a7795_sysc_info; extern const struct rcar_sysc_info r8a7796_sysc_info; +extern const struct rcar_sysc_info r8a77970_sysc_info; extern const struct rcar_sysc_info r8a77995_sysc_info; diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c index 90d6b7a4340a..9f4ee2567c72 100644 --- a/drivers/soc/renesas/renesas-soc.c +++ b/drivers/soc/renesas/renesas-soc.c @@ -144,6 +144,11 @@ static const struct renesas_soc soc_rcar_m3_w __initconst __maybe_unused = { .id = 0x52, }; +static const struct renesas_soc soc_rcar_v3m __initconst __maybe_unused = { + .family = &fam_rcar_gen3, + .id = 0x54, +}; + static const struct renesas_soc soc_rcar_d3 __initconst __maybe_unused = { .family = &fam_rcar_gen3, .id = 0x58, @@ -204,6 +209,9 @@ static const struct of_device_id renesas_socs[] __initconst = { #ifdef CONFIG_ARCH_R8A7796 { .compatible = "renesas,r8a7796", .data = &soc_rcar_m3_w }, #endif +#ifdef CONFIG_ARCH_R8A77970 + { .compatible = "renesas,r8a77970", .data = &soc_rcar_v3m }, +#endif #ifdef CONFIG_ARCH_R8A77995 { .compatible = "renesas,r8a77995", .data = &soc_rcar_d3 }, #endif |