diff options
Diffstat (limited to 'drivers/gpu')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dsc/Makefile | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c | 18 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dsc/rc_calc.c | 151 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dsc/rc_calc.h | 5 | ||||
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dsc/rc_calc_dpi.c | 27 |
5 files changed, 153 insertions, 50 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dsc/Makefile b/drivers/gpu/drm/amd/display/dc/dsc/Makefile index 3f66868df171..ea29cf95d470 100644 --- a/drivers/gpu/drm/amd/display/dc/dsc/Makefile +++ b/drivers/gpu/drm/amd/display/dc/dsc/Makefile @@ -28,8 +28,6 @@ endif endif CFLAGS_$(AMDDALPATH)/dc/dsc/rc_calc.o := $(dsc_ccflags) -CFLAGS_$(AMDDALPATH)/dc/dsc/rc_calc_dpi.o := $(dsc_ccflags) -CFLAGS_$(AMDDALPATH)/dc/dsc/dc_dsc.o := $(dsc_ccflags) DSC = dc_dsc.o rc_calc.o rc_calc_dpi.o diff --git a/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c b/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c index 0ea6662a1563..0c7f247bb7de 100644 --- a/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c +++ b/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c @@ -22,10 +22,12 @@ * Author: AMD */ +#include <drm/drm_dsc.h> #include "dc_hw_types.h" #include "dsc.h" #include <drm/drm_dp_helper.h> #include "dc.h" +#include "rc_calc.h" /* This module's internal functions */ @@ -304,22 +306,6 @@ static inline uint32_t dsc_div_by_10_round_up(uint32_t value) return (value + 9) / 10; } -static inline uint32_t calc_dsc_bpp_x16(uint32_t stream_bandwidth_kbps, uint32_t pix_clk_100hz, uint32_t bpp_increment_div) -{ - uint32_t dsc_target_bpp_x16; - float f_dsc_target_bpp; - float f_stream_bandwidth_100bps = stream_bandwidth_kbps * 10.0f; - uint32_t precision = bpp_increment_div; // bpp_increment_div is actually precision - - f_dsc_target_bpp = f_stream_bandwidth_100bps / pix_clk_100hz; - - // Round down to the nearest precision stop to bring it into DSC spec range - dsc_target_bpp_x16 = (uint32_t)(f_dsc_target_bpp * precision); - dsc_target_bpp_x16 = (dsc_target_bpp_x16 * 16) / precision; - - return dsc_target_bpp_x16; -} - /* Get DSC bandwidth range based on [min_bpp, max_bpp] target bitrate range, and timing's pixel clock * and uncompressed bandwidth. */ diff --git a/drivers/gpu/drm/amd/display/dc/dsc/rc_calc.c b/drivers/gpu/drm/amd/display/dc/dsc/rc_calc.c index 03ae15946c6d..667afbc260f9 100644 --- a/drivers/gpu/drm/amd/display/dc/dsc/rc_calc.c +++ b/drivers/gpu/drm/amd/display/dc/dsc/rc_calc.c @@ -23,6 +23,7 @@ * Authors: AMD * */ +#include <drm/drm_dsc.h> #include "os_types.h" #include "rc_calc.h" @@ -40,7 +41,8 @@ break -void get_qp_set(qp_set qps, enum colour_mode cm, enum bits_per_comp bpc, enum max_min max_min, float bpp) +static void get_qp_set(qp_set qps, enum colour_mode cm, enum bits_per_comp bpc, + enum max_min max_min, float bpp) { int mode = MODE_SELECT(444, 422, 420); int sel = table_hash(mode, bpc, max_min); @@ -85,7 +87,7 @@ void get_qp_set(qp_set qps, enum colour_mode cm, enum bits_per_comp bpc, enum ma memcpy(qps, table[index].qps, sizeof(qp_set)); } -double dsc_roundf(double num) +static double dsc_roundf(double num) { if (num < 0.0) num = num - 0.5; @@ -95,7 +97,7 @@ double dsc_roundf(double num) return (int)(num); } -double dsc_ceil(double num) +static double dsc_ceil(double num) { double retval = (int)num; @@ -105,7 +107,7 @@ double dsc_ceil(double num) return (int)retval; } -void get_ofs_set(qp_set ofs, enum colour_mode mode, float bpp) +static void get_ofs_set(qp_set ofs, enum colour_mode mode, float bpp) { int *p = ofs; @@ -160,7 +162,7 @@ void get_ofs_set(qp_set ofs, enum colour_mode mode, float bpp) } } -int median3(int a, int b, int c) +static int median3(int a, int b, int c) { if (a > b) swap(a, b); @@ -172,13 +174,25 @@ int median3(int a, int b, int c) return b; } -void calc_rc_params(struct rc_params *rc, enum colour_mode cm, enum bits_per_comp bpc, float bpp, int slice_width, int slice_height, int minor_version) +static void _do_calc_rc_params(struct rc_params *rc, enum colour_mode cm, + enum bits_per_comp bpc, u8 drm_bpp, + bool is_navite_422_or_420, + int slice_width, int slice_height, + int minor_version) { + float bpp; float bpp_group; float initial_xmit_delay_factor; int padding_pixels; int i; + bpp = ((float)drm_bpp / 16.0); + /* in native_422 or native_420 modes, the bits_per_pixel is double the + * target bpp (the latter is what calc_rc_params expects) + */ + if (is_navite_422_or_420) + bpp /= 2.0; + rc->rc_quant_incr_limit0 = ((bpc == BPC_8) ? 11 : (bpc == BPC_10 ? 15 : 19)) - ((minor_version == 1 && cm == CM_444) ? 1 : 0); rc->rc_quant_incr_limit1 = ((bpc == BPC_8) ? 11 : (bpc == BPC_10 ? 15 : 19)) - ((minor_version == 1 && cm == CM_444) ? 1 : 0); @@ -251,3 +265,128 @@ void calc_rc_params(struct rc_params *rc, enum colour_mode cm, enum bits_per_com rc->rc_buf_thresh[13] = 8064; } +static u32 _do_bytes_per_pixel_calc(int slice_width, u8 drm_bpp, + bool is_navite_422_or_420) +{ + float bpp; + u32 bytes_per_pixel; + double d_bytes_per_pixel; + + bpp = ((float)drm_bpp / 16.0); + d_bytes_per_pixel = dsc_ceil(bpp * slice_width / 8.0) / slice_width; + // TODO: Make sure the formula for calculating this is precise (ceiling + // vs. floor, and at what point they should be applied) + if (is_navite_422_or_420) + d_bytes_per_pixel /= 2; + + bytes_per_pixel = (u32)dsc_ceil(d_bytes_per_pixel * 0x10000000); + + return bytes_per_pixel; +} + +static u32 _do_calc_dsc_bpp_x16(u32 stream_bandwidth_kbps, u32 pix_clk_100hz, + u32 bpp_increment_div) +{ + u32 dsc_target_bpp_x16; + float f_dsc_target_bpp; + float f_stream_bandwidth_100bps; + // bpp_increment_div is actually precision + u32 precision = bpp_increment_div; + + f_stream_bandwidth_100bps = stream_bandwidth_kbps * 10.0f; + f_dsc_target_bpp = f_stream_bandwidth_100bps / pix_clk_100hz; + + // Round down to the nearest precision stop to bring it into DSC spec + // range + dsc_target_bpp_x16 = (u32)(f_dsc_target_bpp * precision); + dsc_target_bpp_x16 = (dsc_target_bpp_x16 * 16) / precision; + + return dsc_target_bpp_x16; +} + +/** + * calc_rc_params - reads the user's cmdline mode + * @rc: DC internal DSC parameters + * @pps: DRM struct with all required DSC values + * + * This function expects a drm_dsc_config data struct with all the required DSC + * values previously filled out by our driver and based on this information it + * computes some of the DSC values. + * + * @note This calculation requires float point operation, most of it executes + * under kernel_fpu_{begin,end}. + */ +void calc_rc_params(struct rc_params *rc, const struct drm_dsc_config *pps) +{ + enum colour_mode mode; + enum bits_per_comp bpc; + bool is_navite_422_or_420; + u8 drm_bpp = pps->bits_per_pixel; + int slice_width = pps->slice_width; + int slice_height = pps->slice_height; + + mode = pps->convert_rgb ? CM_RGB : (pps->simple_422 ? CM_444 : + (pps->native_422 ? CM_422 : + pps->native_420 ? CM_420 : CM_444)); + bpc = (pps->bits_per_component == 8) ? BPC_8 : (pps->bits_per_component == 10) + ? BPC_10 : BPC_12; + + is_navite_422_or_420 = pps->native_422 || pps->native_420; + + DC_FP_START(); + _do_calc_rc_params(rc, mode, bpc, drm_bpp, is_navite_422_or_420, + slice_width, slice_height, + pps->dsc_version_minor); + DC_FP_END(); +} + +/** + * calc_dsc_bytes_per_pixel - calculate bytes per pixel + * @pps: DRM struct with all required DSC values + * + * Based on the information inside drm_dsc_config, this function calculates the + * total of bytes per pixel. + * + * @note This calculation requires float point operation, most of it executes + * under kernel_fpu_{begin,end}. + * + * Return: + * Return the number of bytes per pixel + */ +u32 calc_dsc_bytes_per_pixel(const struct drm_dsc_config *pps) + +{ + u32 ret; + u8 drm_bpp = pps->bits_per_pixel; + int slice_width = pps->slice_width; + bool is_navite_422_or_420 = pps->native_422 || pps->native_420; + + DC_FP_START(); + ret = _do_bytes_per_pixel_calc(slice_width, drm_bpp, + is_navite_422_or_420); + DC_FP_END(); + return ret; +} + +/** + * calc_dsc_bpp_x16 - retrieve the dsc bits per pixel + * @stream_bandwidth_kbps: + * @pix_clk_100hz: + * @bpp_increment_div: + * + * Calculate the total of bits per pixel for DSC configuration. + * + * @note This calculation requires float point operation, most of it executes + * under kernel_fpu_{begin,end}. + */ +u32 calc_dsc_bpp_x16(u32 stream_bandwidth_kbps, u32 pix_clk_100hz, + u32 bpp_increment_div) +{ + u32 dsc_bpp; + + DC_FP_START(); + dsc_bpp = _do_calc_dsc_bpp_x16(stream_bandwidth_kbps, pix_clk_100hz, + bpp_increment_div); + DC_FP_END(); + return dsc_bpp; +} diff --git a/drivers/gpu/drm/amd/display/dc/dsc/rc_calc.h b/drivers/gpu/drm/amd/display/dc/dsc/rc_calc.h index b6b1f09c2009..21723fa6561e 100644 --- a/drivers/gpu/drm/amd/display/dc/dsc/rc_calc.h +++ b/drivers/gpu/drm/amd/display/dc/dsc/rc_calc.h @@ -77,7 +77,10 @@ struct qp_entry { typedef struct qp_entry qp_table[]; -void calc_rc_params(struct rc_params *rc, enum colour_mode cm, enum bits_per_comp bpc, float bpp, int slice_width, int slice_height, int minor_version); +void calc_rc_params(struct rc_params *rc, const struct drm_dsc_config *pps); +u32 calc_dsc_bytes_per_pixel(const struct drm_dsc_config *pps); +u32 calc_dsc_bpp_x16(u32 stream_bandwidth_kbps, u32 pix_clk_100hz, + u32 bpp_increment_div); #endif diff --git a/drivers/gpu/drm/amd/display/dc/dsc/rc_calc_dpi.c b/drivers/gpu/drm/amd/display/dc/dsc/rc_calc_dpi.c index 1f6e63b71456..ef830aded5b1 100644 --- a/drivers/gpu/drm/amd/display/dc/dsc/rc_calc_dpi.c +++ b/drivers/gpu/drm/amd/display/dc/dsc/rc_calc_dpi.c @@ -27,8 +27,6 @@ #include "dscc_types.h" #include "rc_calc.h" -double dsc_ceil(double num); - static void copy_pps_fields(struct drm_dsc_config *to, const struct drm_dsc_config *from) { to->line_buf_depth = from->line_buf_depth; @@ -100,34 +98,13 @@ static void copy_rc_to_cfg(struct drm_dsc_config *dsc_cfg, const struct rc_param int dscc_compute_dsc_parameters(const struct drm_dsc_config *pps, struct dsc_parameters *dsc_params) { - enum colour_mode mode = pps->convert_rgb ? CM_RGB : - (pps->simple_422 ? CM_444 : - (pps->native_422 ? CM_422 : - pps->native_420 ? CM_420 : CM_444)); - enum bits_per_comp bpc = (pps->bits_per_component == 8) ? BPC_8 : - (pps->bits_per_component == 10) ? BPC_10 : BPC_12; - float bpp = ((float) pps->bits_per_pixel / 16.0); - int slice_width = pps->slice_width; - int slice_height = pps->slice_height; int ret; struct rc_params rc; struct drm_dsc_config dsc_cfg; - double d_bytes_per_pixel = dsc_ceil(bpp * slice_width / 8.0) / slice_width; - - // TODO: Make sure the formula for calculating this is precise (ceiling vs. floor, and at what point they should be applied) - if (pps->native_422 || pps->native_420) - d_bytes_per_pixel /= 2; - - dsc_params->bytes_per_pixel = (uint32_t)dsc_ceil(d_bytes_per_pixel * 0x10000000); - - /* in native_422 or native_420 modes, the bits_per_pixel is double the target bpp - * (the latter is what calc_rc_params expects) - */ - if (pps->native_422 || pps->native_420) - bpp /= 2.0; + dsc_params->bytes_per_pixel = calc_dsc_bytes_per_pixel(pps); - calc_rc_params(&rc, mode, bpc, bpp, slice_width, slice_height, pps->dsc_version_minor); + calc_rc_params(&rc, pps); dsc_params->pps = *pps; dsc_params->pps.initial_scale_value = 8 * rc.rc_model_size / (rc.rc_model_size - rc.initial_fullness_offset); |